diff mbox series

thermal: sprd: Use devm_clk_get_enabled() helpers

Message ID 20240820094450.101976-1-link@vivo.com (mailing list archive)
State New
Delegated to: Daniel Lezcano
Headers show
Series thermal: sprd: Use devm_clk_get_enabled() helpers | expand

Commit Message

Huan Yang Aug. 20, 2024, 9:44 a.m. UTC
The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the calls to clk_disable_unprepare().

Signed-off-by: Huan Yang <link@vivo.com>
---
 drivers/thermal/sprd_thermal.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

Comments

Baolin Wang Aug. 27, 2024, 8:35 a.m. UTC | #1
On 2024/8/20 17:44, Huan Yang wrote:
> The devm_clk_get_enabled() helpers:
>      - call devm_clk_get()
>      - call clk_prepare_enable() and register what is needed in order to
>       call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids the calls to clk_disable_unprepare().
> 
> Signed-off-by: Huan Yang <link@vivo.com>

Thanks. LGTM.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>

> ---
>   drivers/thermal/sprd_thermal.c | 14 +++-----------
>   1 file changed, 3 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c
> index 874192546548..dfd1d529c410 100644
> --- a/drivers/thermal/sprd_thermal.c
> +++ b/drivers/thermal/sprd_thermal.c
> @@ -359,21 +359,17 @@ static int sprd_thm_probe(struct platform_device *pdev)
>   		return -EINVAL;
>   	}
>   
> -	thm->clk = devm_clk_get(&pdev->dev, "enable");
> +	thm->clk = devm_clk_get_enabled(&pdev->dev, "enable");
>   	if (IS_ERR(thm->clk)) {
>   		dev_err(&pdev->dev, "failed to get enable clock\n");
>   		return PTR_ERR(thm->clk);
>   	}
>   
> -	ret = clk_prepare_enable(thm->clk);
> -	if (ret)
> -		return ret;
> -
>   	sprd_thm_para_config(thm);
>   
>   	ret = sprd_thm_cal_read(np, "thm_sign_cal", &val);
>   	if (ret)
> -		goto disable_clk;
> +		return ret;
>   
>   	if (val > 0)
>   		thm->ratio_sign = -1;
> @@ -382,7 +378,7 @@ static int sprd_thm_probe(struct platform_device *pdev)
>   
>   	ret = sprd_thm_cal_read(np, "thm_ratio_cal", &thm->ratio_off);
>   	if (ret)
> -		goto disable_clk;
> +		return ret;
>   
>   	for_each_child_of_node(np, sen_child) {
>   		sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
> @@ -439,8 +435,6 @@ static int sprd_thm_probe(struct platform_device *pdev)
>   
>   of_put:
>   	of_node_put(sen_child);
> -disable_clk:
> -	clk_disable_unprepare(thm->clk);
>   	return ret;
>   }
>   
> @@ -526,8 +520,6 @@ static void sprd_thm_remove(struct platform_device *pdev)
>   		devm_thermal_of_zone_unregister(&pdev->dev,
>   						thm->sensor[i]->tzd);
>   	}
> -
> -	clk_disable_unprepare(thm->clk);
>   }
>   
>   static const struct of_device_id sprd_thermal_of_match[] = {
Daniel Lezcano Sept. 2, 2024, 11:14 a.m. UTC | #2
On 20/08/2024 11:44, Huan Yang wrote:
> The devm_clk_get_enabled() helpers:
>      - call devm_clk_get()
>      - call clk_prepare_enable() and register what is needed in order to
>       call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids the calls to clk_disable_unprepare().
> 
> Signed-off-by: Huan Yang <link@vivo.com>
> ---

Applied, thanks
diff mbox series

Patch

diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c
index 874192546548..dfd1d529c410 100644
--- a/drivers/thermal/sprd_thermal.c
+++ b/drivers/thermal/sprd_thermal.c
@@ -359,21 +359,17 @@  static int sprd_thm_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	thm->clk = devm_clk_get(&pdev->dev, "enable");
+	thm->clk = devm_clk_get_enabled(&pdev->dev, "enable");
 	if (IS_ERR(thm->clk)) {
 		dev_err(&pdev->dev, "failed to get enable clock\n");
 		return PTR_ERR(thm->clk);
 	}
 
-	ret = clk_prepare_enable(thm->clk);
-	if (ret)
-		return ret;
-
 	sprd_thm_para_config(thm);
 
 	ret = sprd_thm_cal_read(np, "thm_sign_cal", &val);
 	if (ret)
-		goto disable_clk;
+		return ret;
 
 	if (val > 0)
 		thm->ratio_sign = -1;
@@ -382,7 +378,7 @@  static int sprd_thm_probe(struct platform_device *pdev)
 
 	ret = sprd_thm_cal_read(np, "thm_ratio_cal", &thm->ratio_off);
 	if (ret)
-		goto disable_clk;
+		return ret;
 
 	for_each_child_of_node(np, sen_child) {
 		sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
@@ -439,8 +435,6 @@  static int sprd_thm_probe(struct platform_device *pdev)
 
 of_put:
 	of_node_put(sen_child);
-disable_clk:
-	clk_disable_unprepare(thm->clk);
 	return ret;
 }
 
@@ -526,8 +520,6 @@  static void sprd_thm_remove(struct platform_device *pdev)
 		devm_thermal_of_zone_unregister(&pdev->dev,
 						thm->sensor[i]->tzd);
 	}
-
-	clk_disable_unprepare(thm->clk);
 }
 
 static const struct of_device_id sprd_thermal_of_match[] = {