| Message ID | 20240829213102.448047-3-macroalpha82@gmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | Add Texas Instruments BQ25703 Charger | expand |
On Thu, 29 Aug 2024, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > The Texas Instruments BQ25703A is an integrated charger manager and > boost converter. > > The MFD driver initalizes the device for the regulator driver > and power supply driver. > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> > --- > drivers/mfd/Kconfig | 11 ++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/bq257xx.c | 118 +++++++++++++++++++++++++++++++++++ > include/linux/mfd/bq257xx.h | 120 ++++++++++++++++++++++++++++++++++++ > 4 files changed, 250 insertions(+) > create mode 100644 drivers/mfd/bq257xx.c > create mode 100644 include/linux/mfd/bq257xx.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index bc8be2e593b6..712951ae7341 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -1537,6 +1537,17 @@ config MFD_TI_LMU > LM36274. It consists of backlight, LED and regulator driver. > It provides consistent device controls for lighting functions. > > +config MFD_BQ257XX > + tristate "TI BQ257XX Buck/Boost Charge Controller" > + depends on I2C > + select MFD_CORE > + select REGMAP_I2C > + help > + Support Texas Instruments BQ25703 Buck/Boost converter with > + charge controller. It consists of regulators that provide > + system voltage and OTG voltage, and a charger manager for > + batteries containing one or more cells. > + > config MFD_OMAP_USB_HOST > bool "TI OMAP USBHS core and TLL driver" > depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 02b651cd7535..90bc65d83c5f 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_SM501) += sm501.o > obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o > obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o > +obj-$(CONFIG_MFD_BQ257XX) += bq257xx.o > obj-$(CONFIG_MFD_CROS_EC_DEV) += cros_ec_dev.o > obj-$(CONFIG_MFD_CS42L43) += cs42l43.o > obj-$(CONFIG_MFD_CS42L43_I2C) += cs42l43-i2c.o > diff --git a/drivers/mfd/bq257xx.c b/drivers/mfd/bq257xx.c > new file mode 100644 > index 000000000000..c612262f9a1e > --- /dev/null > +++ b/drivers/mfd/bq257xx.c > @@ -0,0 +1,118 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* BQ257XX MFD Driver The top line of a multi-line comment should be empty. Please drop _all_ mentions of "MFD" - it's not a thing. > + * Copyright (C) 2024 Chris Morgan <macromorgan@hotmail.com> '\n' here. > + * Based off of BQ256XX Battery Charger Driver and > + * Rockchip RK808 MFD Driver You really don't have to mention this. 9 out of every 10 (I just made those figures up) drivers in the kernel take inspiration from existing ones. These sentences don't add anything IMHO. > + */ > + > +#include <linux/device.h> > +#include <linux/i2c.h> > +#include <linux/mfd/bq257xx.h> > +#include <linux/mfd/core.h> > +#include <linux/regmap.h> > + > +static const struct regmap_range bq25703_readonly_reg_ranges[] = { > + regmap_reg_range(BQ25703_CHARGER_STATUS, BQ25703_MANUFACT_DEV_ID), > +}; > + > +static const struct regmap_access_table bq25703_writeable_regs = { > + .no_ranges = bq25703_readonly_reg_ranges, > + .n_no_ranges = ARRAY_SIZE(bq25703_readonly_reg_ranges), > +}; > + > +static const struct regmap_range bq25703_volatile_reg_ranges[] = { > + regmap_reg_range(BQ25703_CHARGE_OPTION_0, BQ25703_IIN_HOST), > + regmap_reg_range(BQ25703_CHARGER_STATUS, BQ25703_ADC_OPTION), > +}; > + > +static const struct regmap_access_table bq25703_volatile_regs = { > + .yes_ranges = bq25703_volatile_reg_ranges, > + .n_yes_ranges = ARRAY_SIZE(bq25703_volatile_reg_ranges), > +}; > + > +static const struct regmap_config bq25703_regmap_config = { > + .reg_bits = 8, > + .val_bits = 16, > + .max_register = BQ25703_ADC_OPTION, > + .cache_type = REGCACHE_RBTREE, > + .wr_table = &bq25703_writeable_regs, > + .volatile_table = &bq25703_volatile_regs, > + .val_format_endian = REGMAP_ENDIAN_LITTLE, > +}; > + > +static const struct mfd_cell bq25703_cells[] = { > + MFD_CELL_NAME("bq257xx-regulator"), > + MFD_CELL_NAME("bq257xx-charger"), > +}; > + > +static int bq257xx_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct bq257xx_device *bq; Call this ddata. > + const struct mfd_cell *cells; > + int nr_cells; > + int ret = 0; The pre-initialisation is redundant. > + bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL); > + if (!bq) > + return -ENOMEM; > + > + bq->client = client; > + bq->dev = dev; You don't need both. > + bq->variant = (long)i2c_get_match_data(client); Pretty sure this cast is not correct and maybe not even required. > + switch (bq->variant) { > + case BQ25703A: I wouldn't add all of this complexity until its needed. > + bq->regmap_cfg = &bq25703_regmap_config; Where is this consumed? > + cells = bq25703_cells; > + nr_cells = ARRAY_SIZE(bq25703_cells); > + break; > + default: > + dev_err(dev, "Unsupported BQ257XX ID %ld\n", bq->variant); > + return -EINVAL; > + } > + > + bq->regmap = devm_regmap_init_i2c(client, bq->regmap_cfg); > + Remove this line. > + if (IS_ERR(bq->regmap)) { > + dev_err(dev, "Failed to allocate register map\n"); > + return PTR_ERR(bq->regmap); > + } > + > + i2c_set_clientdata(client, bq); > + > + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, > + cells, nr_cells, NULL, 0, NULL); > + if (ret) { > + dev_err(&client->dev, "failed to add MFD devices %d\n", ret); No such thing. "Failed to register child devices" q > + return ret; > + } > + > + return ret; > +} > + > +static const struct i2c_device_id bq257xx_i2c_ids[] = { > + { "bq25703a" }, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, bq257xx_i2c_ids); > + > +static const struct of_device_id bq257xx_of_match[] = { > + { .compatible = "ti,bq25703a", .data = (void *)BQ25703A, }, Cast almost certainly not required. > + {} > +}; > +MODULE_DEVICE_TABLE(of, bq257xx_of_match); > + > +static struct i2c_driver bq257xx_driver = { > + .driver = { > + .name = "bq257xx", > + .of_match_table = bq257xx_of_match, > + }, > + .probe = bq257xx_probe, > + .id_table = bq257xx_i2c_ids, > +}; > +module_i2c_driver(bq257xx_driver); > + > +MODULE_DESCRIPTION("bq257xx buck/boost/charger MFD driver"); Not an "MFD driver" > +MODULE_AUTHOR("Chris Morgan <macromorgan@hotmail.com>"); > +MODULE_LICENSE("GPL"); > diff --git a/include/linux/mfd/bq257xx.h b/include/linux/mfd/bq257xx.h > new file mode 100644 > index 000000000000..51f6501c6441 > --- /dev/null > +++ b/include/linux/mfd/bq257xx.h > @@ -0,0 +1,120 @@ > +/* SPDX-License-Identifier: GPL-2.0 > + * Register definitions for TI BQ257XX > + * Heavily based off of BQ256XX Battery Charger Driver > + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ > + */ All as above. > +#define BQ257XX_MANUFACTURER "Texas Instruments" Errr, no thank you. Just use strings where you need them. > +#define BQ25703_CHARGE_OPTION_0 0x00 > +#define BQ25703_CHARGE_CURRENT 0x02 > +#define BQ25703_MAX_CHARGE_VOLT 0x04 > +#define BQ25703_OTG_VOLT 0x06 > +#define BQ25703_OTG_CURRENT 0x08 > +#define BQ25703_INPUT_VOLTAGE 0x0a > +#define BQ25703_MIN_VSYS 0x0c > +#define BQ25703_IIN_HOST 0x0e > +#define BQ25703_CHARGER_STATUS 0x20 > +#define BQ25703_PROCHOT_STATUS 0x22 > +#define BQ25703_IIN_DPM 0x24 > +#define BQ25703_ADCIBAT_CHG 0x28 > +#define BQ25703_ADCIINCMPIN 0x2a > +#define BQ25703_ADCVSYSVBAT 0x2c > +#define BQ25703_MANUFACT_DEV_ID 0x2e > +#define BQ25703_CHARGE_OPTION_1 0x30 > +#define BQ25703_CHARGE_OPTION_2 0x32 > +#define BQ25703_CHARGE_OPTION_3 0x34 > +#define BQ25703_ADC_OPTION 0x3a > + > +#define BQ25703_EN_LWPWR BIT(15) > +#define BQ25703_WDTMR_ADJ_MASK GENMASK(14, 13) > +#define BQ25703_WDTMR_DISABLE 0 > +#define BQ25703_WDTMR_5_SEC 1 > +#define BQ25703_WDTMR_88_SEC 2 > +#define BQ25703_WDTMR_175_SEC 3 > + > +#define BQ25703_ICHG_MASK GENMASK(12, 6) > +#define BQ25703_ICHG_STEP_UA 64000 > +#define BQ25703_ICHG_MIN_UA 64000 > +#define BQ25703_ICHG_MAX_UA 8128000 > + > +#define BQ25703_MAX_CHARGE_VOLT_MASK GENMASK(15, 4) > +#define BQ25703_VBATREG_STEP_UV 16000 > +#define BQ25703_VBATREG_MIN_UV 1024000 > +#define BQ25703_VBATREG_MAX_UV 19200000 > + > +#define BQ25703_OTG_VOLT_MASK GENMASK(13, 6) > +#define BQ25703_OTG_VOLT_STEP_UV 64000 > +#define BQ25703_OTG_VOLT_MIN_UV 4480000 > +#define BQ25703_OTG_VOLT_MAX_UV 20800000 > +#define BQ25703_OTG_VOLT_NUM_VOLT 256 > + > +#define BQ25703_OTG_CUR_MASK GENMASK(14, 8) > +#define BQ25703_OTG_CUR_STEP_UA 50000 > +#define BQ25703_OTG_CUR_MAX_UA 6350000 > + > +#define BQ25703_MINVSYS_MASK GENMASK(13, 8) > +#define BQ25703_MINVSYS_STEP_UV 256000 > +#define BQ25703_MINVSYS_MIN_UV 1024000 > +#define BQ25703_MINVSYS_MAX_UV 16128000 > + > +#define BQ25703_STS_AC_STAT BIT(15) > +#define BQ25703_STS_IN_FCHRG BIT(10) > +#define BQ25703_STS_IN_PCHRG BIT(9) > +#define BQ25703_STS_FAULT_ACOV BIT(7) > +#define BQ25703_STS_FAULT_BATOC BIT(6) > +#define BQ25703_STS_FAULT_ACOC BIT(5) > + > +#define BQ25703_IINDPM_MASK GENMASK(14, 8) > +#define BQ25703_IINDPM_STEP_UA 50000 > +#define BQ25703_IINDPM_MIN_UA 50000 > +#define BQ25703_IINDPM_MAX_UA 6400000 > +#define BQ25703_IINDPM_DEFAULT_UA 3300000 > +#define BQ25703_IINDPM_OFFSET_UA 50000 > + > +#define BQ25703_ADCIBAT_DISCHG_MASK GENMASK(6, 0) > +#define BQ25703_ADCIBAT_CHG_MASK GENMASK(14, 8) > +#define BQ25703_ADCIBAT_CHG_STEP_UA 64000 > +#define BQ25703_ADCIBAT_DIS_STEP_UA 256000 > + > +#define BQ25703_ADCIIN GENMASK(15, 8) > +#define BQ25703_ADCIINCMPIN_STEP 50000 > + > +#define BQ25703_ADCVSYS_MASK GENMASK(15, 8) > +#define BQ25703_ADCVBAT_MASK GENMASK(7, 0) > +#define BQ25703_ADCVSYSVBAT_OFFSET_UV 2880000 > +#define BQ25703_ADCVSYSVBAT_STEP 64000 > + > +#define BQ25703_ADC_CH_MASK GENMASK(7, 0) > +#define BQ25703_ADC_CONV_EN BIT(15) > +#define BQ25703_ADC_START BIT(14) > +#define BQ25703_ADC_FULL_SCALE BIT(13) > +#define BQ25703_ADC_CMPIN_EN BIT(7) > +#define BQ25703_ADC_VBUS_EN BIT(6) > +#define BQ25703_ADC_PSYS_EN BIT(5) > +#define BQ25703_ADC_IIN_EN BIT(4) > +#define BQ25703_ADC_IDCHG_EN BIT(3) > +#define BQ25703_ADC_ICHG_EN BIT(2) > +#define BQ25703_ADC_VSYS_EN BIT(1) > +#define BQ25703_ADC_VBAT_EN BIT(0) > + > +#define BQ25703_EN_OTG_MASK BIT(12) > + > +enum bq257xx_id { > + BQ25703A, > +}; > + > +/** Are you sure you want to use kernel-doc here? I would advise against it. > + * struct bq257xx_device - > + * @client: i2c client structure > + * @regmap: register map structure > + * @dev: device structure > + * @regmap_cfg: device specific regmap cfg It's also wrong. Did you test build with W=1? > + */ > +struct bq257xx_device { > + struct i2c_client *client; > + struct regmap *regmap; > + struct device *dev; > + const struct regmap_config *regmap_cfg; > + long variant; > +}; > -- > 2.34.1 >
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index bc8be2e593b6..712951ae7341 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1537,6 +1537,17 @@ config MFD_TI_LMU LM36274. It consists of backlight, LED and regulator driver. It provides consistent device controls for lighting functions. +config MFD_BQ257XX + tristate "TI BQ257XX Buck/Boost Charge Controller" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Support Texas Instruments BQ25703 Buck/Boost converter with + charge controller. It consists of regulators that provide + system voltage and OTG voltage, and a charger manager for + batteries containing one or more cells. + config MFD_OMAP_USB_HOST bool "TI OMAP USBHS core and TLL driver" depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 02b651cd7535..90bc65d83c5f 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o +obj-$(CONFIG_MFD_BQ257XX) += bq257xx.o obj-$(CONFIG_MFD_CROS_EC_DEV) += cros_ec_dev.o obj-$(CONFIG_MFD_CS42L43) += cs42l43.o obj-$(CONFIG_MFD_CS42L43_I2C) += cs42l43-i2c.o diff --git a/drivers/mfd/bq257xx.c b/drivers/mfd/bq257xx.c new file mode 100644 index 000000000000..c612262f9a1e --- /dev/null +++ b/drivers/mfd/bq257xx.c @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0 +/* BQ257XX MFD Driver + * Copyright (C) 2024 Chris Morgan <macromorgan@hotmail.com> + * Based off of BQ256XX Battery Charger Driver and + * Rockchip RK808 MFD Driver + */ + +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/mfd/bq257xx.h> +#include <linux/mfd/core.h> +#include <linux/regmap.h> + +static const struct regmap_range bq25703_readonly_reg_ranges[] = { + regmap_reg_range(BQ25703_CHARGER_STATUS, BQ25703_MANUFACT_DEV_ID), +}; + +static const struct regmap_access_table bq25703_writeable_regs = { + .no_ranges = bq25703_readonly_reg_ranges, + .n_no_ranges = ARRAY_SIZE(bq25703_readonly_reg_ranges), +}; + +static const struct regmap_range bq25703_volatile_reg_ranges[] = { + regmap_reg_range(BQ25703_CHARGE_OPTION_0, BQ25703_IIN_HOST), + regmap_reg_range(BQ25703_CHARGER_STATUS, BQ25703_ADC_OPTION), +}; + +static const struct regmap_access_table bq25703_volatile_regs = { + .yes_ranges = bq25703_volatile_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(bq25703_volatile_reg_ranges), +}; + +static const struct regmap_config bq25703_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = BQ25703_ADC_OPTION, + .cache_type = REGCACHE_RBTREE, + .wr_table = &bq25703_writeable_regs, + .volatile_table = &bq25703_volatile_regs, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static const struct mfd_cell bq25703_cells[] = { + MFD_CELL_NAME("bq257xx-regulator"), + MFD_CELL_NAME("bq257xx-charger"), +}; + +static int bq257xx_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct bq257xx_device *bq; + const struct mfd_cell *cells; + int nr_cells; + int ret = 0; + + bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL); + if (!bq) + return -ENOMEM; + + bq->client = client; + bq->dev = dev; + bq->variant = (long)i2c_get_match_data(client); + + switch (bq->variant) { + case BQ25703A: + bq->regmap_cfg = &bq25703_regmap_config; + cells = bq25703_cells; + nr_cells = ARRAY_SIZE(bq25703_cells); + break; + default: + dev_err(dev, "Unsupported BQ257XX ID %ld\n", bq->variant); + return -EINVAL; + } + + bq->regmap = devm_regmap_init_i2c(client, bq->regmap_cfg); + + if (IS_ERR(bq->regmap)) { + dev_err(dev, "Failed to allocate register map\n"); + return PTR_ERR(bq->regmap); + } + + i2c_set_clientdata(client, bq); + + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, + cells, nr_cells, NULL, 0, NULL); + if (ret) { + dev_err(&client->dev, "failed to add MFD devices %d\n", ret); + return ret; + } + + return ret; +} + +static const struct i2c_device_id bq257xx_i2c_ids[] = { + { "bq25703a" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, bq257xx_i2c_ids); + +static const struct of_device_id bq257xx_of_match[] = { + { .compatible = "ti,bq25703a", .data = (void *)BQ25703A, }, + {} +}; +MODULE_DEVICE_TABLE(of, bq257xx_of_match); + +static struct i2c_driver bq257xx_driver = { + .driver = { + .name = "bq257xx", + .of_match_table = bq257xx_of_match, + }, + .probe = bq257xx_probe, + .id_table = bq257xx_i2c_ids, +}; +module_i2c_driver(bq257xx_driver); + +MODULE_DESCRIPTION("bq257xx buck/boost/charger MFD driver"); +MODULE_AUTHOR("Chris Morgan <macromorgan@hotmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/bq257xx.h b/include/linux/mfd/bq257xx.h new file mode 100644 index 000000000000..51f6501c6441 --- /dev/null +++ b/include/linux/mfd/bq257xx.h @@ -0,0 +1,120 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Register definitions for TI BQ257XX + * Heavily based off of BQ256XX Battery Charger Driver + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#define BQ257XX_MANUFACTURER "Texas Instruments" + +#define BQ25703_CHARGE_OPTION_0 0x00 +#define BQ25703_CHARGE_CURRENT 0x02 +#define BQ25703_MAX_CHARGE_VOLT 0x04 +#define BQ25703_OTG_VOLT 0x06 +#define BQ25703_OTG_CURRENT 0x08 +#define BQ25703_INPUT_VOLTAGE 0x0a +#define BQ25703_MIN_VSYS 0x0c +#define BQ25703_IIN_HOST 0x0e +#define BQ25703_CHARGER_STATUS 0x20 +#define BQ25703_PROCHOT_STATUS 0x22 +#define BQ25703_IIN_DPM 0x24 +#define BQ25703_ADCIBAT_CHG 0x28 +#define BQ25703_ADCIINCMPIN 0x2a +#define BQ25703_ADCVSYSVBAT 0x2c +#define BQ25703_MANUFACT_DEV_ID 0x2e +#define BQ25703_CHARGE_OPTION_1 0x30 +#define BQ25703_CHARGE_OPTION_2 0x32 +#define BQ25703_CHARGE_OPTION_3 0x34 +#define BQ25703_ADC_OPTION 0x3a + +#define BQ25703_EN_LWPWR BIT(15) +#define BQ25703_WDTMR_ADJ_MASK GENMASK(14, 13) +#define BQ25703_WDTMR_DISABLE 0 +#define BQ25703_WDTMR_5_SEC 1 +#define BQ25703_WDTMR_88_SEC 2 +#define BQ25703_WDTMR_175_SEC 3 + +#define BQ25703_ICHG_MASK GENMASK(12, 6) +#define BQ25703_ICHG_STEP_UA 64000 +#define BQ25703_ICHG_MIN_UA 64000 +#define BQ25703_ICHG_MAX_UA 8128000 + +#define BQ25703_MAX_CHARGE_VOLT_MASK GENMASK(15, 4) +#define BQ25703_VBATREG_STEP_UV 16000 +#define BQ25703_VBATREG_MIN_UV 1024000 +#define BQ25703_VBATREG_MAX_UV 19200000 + +#define BQ25703_OTG_VOLT_MASK GENMASK(13, 6) +#define BQ25703_OTG_VOLT_STEP_UV 64000 +#define BQ25703_OTG_VOLT_MIN_UV 4480000 +#define BQ25703_OTG_VOLT_MAX_UV 20800000 +#define BQ25703_OTG_VOLT_NUM_VOLT 256 + +#define BQ25703_OTG_CUR_MASK GENMASK(14, 8) +#define BQ25703_OTG_CUR_STEP_UA 50000 +#define BQ25703_OTG_CUR_MAX_UA 6350000 + +#define BQ25703_MINVSYS_MASK GENMASK(13, 8) +#define BQ25703_MINVSYS_STEP_UV 256000 +#define BQ25703_MINVSYS_MIN_UV 1024000 +#define BQ25703_MINVSYS_MAX_UV 16128000 + +#define BQ25703_STS_AC_STAT BIT(15) +#define BQ25703_STS_IN_FCHRG BIT(10) +#define BQ25703_STS_IN_PCHRG BIT(9) +#define BQ25703_STS_FAULT_ACOV BIT(7) +#define BQ25703_STS_FAULT_BATOC BIT(6) +#define BQ25703_STS_FAULT_ACOC BIT(5) + +#define BQ25703_IINDPM_MASK GENMASK(14, 8) +#define BQ25703_IINDPM_STEP_UA 50000 +#define BQ25703_IINDPM_MIN_UA 50000 +#define BQ25703_IINDPM_MAX_UA 6400000 +#define BQ25703_IINDPM_DEFAULT_UA 3300000 +#define BQ25703_IINDPM_OFFSET_UA 50000 + +#define BQ25703_ADCIBAT_DISCHG_MASK GENMASK(6, 0) +#define BQ25703_ADCIBAT_CHG_MASK GENMASK(14, 8) +#define BQ25703_ADCIBAT_CHG_STEP_UA 64000 +#define BQ25703_ADCIBAT_DIS_STEP_UA 256000 + +#define BQ25703_ADCIIN GENMASK(15, 8) +#define BQ25703_ADCIINCMPIN_STEP 50000 + +#define BQ25703_ADCVSYS_MASK GENMASK(15, 8) +#define BQ25703_ADCVBAT_MASK GENMASK(7, 0) +#define BQ25703_ADCVSYSVBAT_OFFSET_UV 2880000 +#define BQ25703_ADCVSYSVBAT_STEP 64000 + +#define BQ25703_ADC_CH_MASK GENMASK(7, 0) +#define BQ25703_ADC_CONV_EN BIT(15) +#define BQ25703_ADC_START BIT(14) +#define BQ25703_ADC_FULL_SCALE BIT(13) +#define BQ25703_ADC_CMPIN_EN BIT(7) +#define BQ25703_ADC_VBUS_EN BIT(6) +#define BQ25703_ADC_PSYS_EN BIT(5) +#define BQ25703_ADC_IIN_EN BIT(4) +#define BQ25703_ADC_IDCHG_EN BIT(3) +#define BQ25703_ADC_ICHG_EN BIT(2) +#define BQ25703_ADC_VSYS_EN BIT(1) +#define BQ25703_ADC_VBAT_EN BIT(0) + +#define BQ25703_EN_OTG_MASK BIT(12) + +enum bq257xx_id { + BQ25703A, +}; + +/** + * struct bq257xx_device - + * @client: i2c client structure + * @regmap: register map structure + * @dev: device structure + * @regmap_cfg: device specific regmap cfg + */ +struct bq257xx_device { + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + const struct regmap_config *regmap_cfg; + long variant; +};