diff mbox series

[v2,14/21] dt-bindings: cpufreq: qcom-hw: document support for SA8255p

Message ID 20240903220240.2594102-15-quic_nkela@quicinc.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series [v2,01/21] dt-bindings: arm: qcom: add the SoC ID for SA8255P | expand

Commit Message

Nikunj Kela Sept. 3, 2024, 10:02 p.m. UTC
Add compatible for the cpufreq engine representing support on SA8255p.

Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
---
 .../bindings/cpufreq/cpufreq-qcom-hw.yaml        | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Krzysztof Kozlowski Sept. 4, 2024, 6:26 a.m. UTC | #1
On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote:
> Add compatible for the cpufreq engine representing support on SA8255p.
> 
> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
> ---
>  .../bindings/cpufreq/cpufreq-qcom-hw.yaml        | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
> index 1e9797f96410..84865e553c8b 100644
> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
> @@ -34,6 +34,7 @@ properties:
>          items:
>            - enum:
>                - qcom,qdu1000-cpufreq-epss
> +              - qcom,sa8255p-cpufreq-epss
>                - qcom,sa8775p-cpufreq-epss
>                - qcom,sc7280-cpufreq-epss
>                - qcom,sc8280xp-cpufreq-epss
> @@ -206,6 +207,21 @@ allOf:
>          interrupt-names:
>            minItems: 2
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sa8255p-cpufreq-epss
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2
> +          maxItems: 2
> +
> +        reg-names:
> +          minItems: 2
> +          maxItems: 2

What about interrupts? You need to constrain each of such lists.

Best regards,
Krzysztof
Nikunj Kela Sept. 4, 2024, 12:27 p.m. UTC | #2
On 9/3/2024 11:26 PM, Krzysztof Kozlowski wrote:
> On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote:
>> Add compatible for the cpufreq engine representing support on SA8255p.
>>
>> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
>> ---
>>  .../bindings/cpufreq/cpufreq-qcom-hw.yaml        | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>> index 1e9797f96410..84865e553c8b 100644
>> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>> @@ -34,6 +34,7 @@ properties:
>>          items:
>>            - enum:
>>                - qcom,qdu1000-cpufreq-epss
>> +              - qcom,sa8255p-cpufreq-epss
>>                - qcom,sa8775p-cpufreq-epss
>>                - qcom,sc7280-cpufreq-epss
>>                - qcom,sc8280xp-cpufreq-epss
>> @@ -206,6 +207,21 @@ allOf:
>>          interrupt-names:
>>            minItems: 2
>>  
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - qcom,sa8255p-cpufreq-epss
>> +    then:
>> +      properties:
>> +        reg:
>> +          minItems: 2
>> +          maxItems: 2
>> +
>> +        reg-names:
>> +          minItems: 2
>> +          maxItems: 2
> What about interrupts? You need to constrain each of such lists.
>
> Best regards,
> Krzysztof

Interrupts are not required, I still need to put constraints for
interrupts? BTW, there is no if block for SA8775p binding in this file.

Thanks,

-Nikunj
Krzysztof Kozlowski Sept. 4, 2024, 1:17 p.m. UTC | #3
On 04/09/2024 14:27, Nikunj Kela wrote:
> 
> On 9/3/2024 11:26 PM, Krzysztof Kozlowski wrote:
>> On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote:
>>> Add compatible for the cpufreq engine representing support on SA8255p.
>>>
>>> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
>>> ---
>>>  .../bindings/cpufreq/cpufreq-qcom-hw.yaml        | 16 ++++++++++++++++
>>>  1 file changed, 16 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>> index 1e9797f96410..84865e553c8b 100644
>>> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>> @@ -34,6 +34,7 @@ properties:
>>>          items:
>>>            - enum:
>>>                - qcom,qdu1000-cpufreq-epss
>>> +              - qcom,sa8255p-cpufreq-epss
>>>                - qcom,sa8775p-cpufreq-epss
>>>                - qcom,sc7280-cpufreq-epss
>>>                - qcom,sc8280xp-cpufreq-epss
>>> @@ -206,6 +207,21 @@ allOf:
>>>          interrupt-names:
>>>            minItems: 2
>>>  
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            enum:
>>> +              - qcom,sa8255p-cpufreq-epss
>>> +    then:
>>> +      properties:
>>> +        reg:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +
>>> +        reg-names:
>>> +          minItems: 2
>>> +          maxItems: 2
>> What about interrupts? You need to constrain each of such lists.
>>
>> Best regards,
>> Krzysztof
> 
> Interrupts are not required, I still need to put constraints for

It's irrelevant whether they are required or not. Each property should
be narrowed.

> interrupts? BTW, there is no if block for SA8775p binding in this file.



Best regards,
Krzysztof
Nikunj Kela Sept. 4, 2024, 2:19 p.m. UTC | #4
On 9/4/2024 6:17 AM, Krzysztof Kozlowski wrote:
> On 04/09/2024 14:27, Nikunj Kela wrote:
>> On 9/3/2024 11:26 PM, Krzysztof Kozlowski wrote:
>>> On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote:
>>>> Add compatible for the cpufreq engine representing support on SA8255p.
>>>>
>>>> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
>>>> ---
>>>>  .../bindings/cpufreq/cpufreq-qcom-hw.yaml        | 16 ++++++++++++++++
>>>>  1 file changed, 16 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>>> index 1e9797f96410..84865e553c8b 100644
>>>> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>>> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>>> @@ -34,6 +34,7 @@ properties:
>>>>          items:
>>>>            - enum:
>>>>                - qcom,qdu1000-cpufreq-epss
>>>> +              - qcom,sa8255p-cpufreq-epss
>>>>                - qcom,sa8775p-cpufreq-epss
>>>>                - qcom,sc7280-cpufreq-epss
>>>>                - qcom,sc8280xp-cpufreq-epss
>>>> @@ -206,6 +207,21 @@ allOf:
>>>>          interrupt-names:
>>>>            minItems: 2
>>>>  
>>>> +  - if:
>>>> +      properties:
>>>> +        compatible:
>>>> +          contains:
>>>> +            enum:
>>>> +              - qcom,sa8255p-cpufreq-epss
>>>> +    then:
>>>> +      properties:
>>>> +        reg:
>>>> +          minItems: 2
>>>> +          maxItems: 2
>>>> +
>>>> +        reg-names:
>>>> +          minItems: 2
>>>> +          maxItems: 2
>>> What about interrupts? You need to constrain each of such lists.
>>>
>>> Best regards,
>>> Krzysztof
>> Interrupts are not required, I still need to put constraints for
> It's irrelevant whether they are required or not. Each property should
> be narrowed.

So evenif we don't use interrupts property in our DT(patch#21), we need
to mention interrupts here? You suggest we put interrupts with maxItems: 0?

I wonder why SA8775p compatible is not in constraint list..

>> interrupts? BTW, there is no if block for SA8775p binding in this file.
>
>
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Sept. 4, 2024, 2:29 p.m. UTC | #5
On 04/09/2024 16:19, Nikunj Kela wrote:
> 
> On 9/4/2024 6:17 AM, Krzysztof Kozlowski wrote:
>> On 04/09/2024 14:27, Nikunj Kela wrote:
>>> On 9/3/2024 11:26 PM, Krzysztof Kozlowski wrote:
>>>> On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote:
>>>>> Add compatible for the cpufreq engine representing support on SA8255p.
>>>>>
>>>>> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
>>>>> ---
>>>>>  .../bindings/cpufreq/cpufreq-qcom-hw.yaml        | 16 ++++++++++++++++
>>>>>  1 file changed, 16 insertions(+)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>>>> index 1e9797f96410..84865e553c8b 100644
>>>>> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>>>> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
>>>>> @@ -34,6 +34,7 @@ properties:
>>>>>          items:
>>>>>            - enum:
>>>>>                - qcom,qdu1000-cpufreq-epss
>>>>> +              - qcom,sa8255p-cpufreq-epss
>>>>>                - qcom,sa8775p-cpufreq-epss
>>>>>                - qcom,sc7280-cpufreq-epss
>>>>>                - qcom,sc8280xp-cpufreq-epss
>>>>> @@ -206,6 +207,21 @@ allOf:
>>>>>          interrupt-names:
>>>>>            minItems: 2
>>>>>  
>>>>> +  - if:
>>>>> +      properties:
>>>>> +        compatible:
>>>>> +          contains:
>>>>> +            enum:
>>>>> +              - qcom,sa8255p-cpufreq-epss
>>>>> +    then:
>>>>> +      properties:
>>>>> +        reg:
>>>>> +          minItems: 2
>>>>> +          maxItems: 2
>>>>> +
>>>>> +        reg-names:
>>>>> +          minItems: 2
>>>>> +          maxItems: 2
>>>> What about interrupts? You need to constrain each of such lists.
>>>>
>>>> Best regards,
>>>> Krzysztof
>>> Interrupts are not required, I still need to put constraints for
>> It's irrelevant whether they are required or not. Each property should
>> be narrowed.
> 
> So evenif we don't use interrupts property in our DT(patch#21), we need
> to mention interrupts here? You suggest we put interrupts with maxItems: 0?

I don't understand. You use three quite separate statements. "Not
required", "don't use" and here "maxItems: 0" which means not allowed.

All of these mean something else and I keep guessing and responding
according to what you write. Probably half of my advises are just trash,
because it turns out it is something entirely else than what I read.

Make a decision how the hardware looks like.

> 
> I wonder why SA8775p compatible is not in constraint list..
> 
>>> interrupts? BTW, there is no if block for SA8775p binding in this file.
>>
>>
>> Best regards,
>> Krzysztof
>>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
index 1e9797f96410..84865e553c8b 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -34,6 +34,7 @@  properties:
         items:
           - enum:
               - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8255p-cpufreq-epss
               - qcom,sa8775p-cpufreq-epss
               - qcom,sc7280-cpufreq-epss
               - qcom,sc8280xp-cpufreq-epss
@@ -206,6 +207,21 @@  allOf:
         interrupt-names:
           minItems: 2
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8255p-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        reg-names:
+          minItems: 2
+          maxItems: 2
 
 examples:
   - |