diff mbox series

[1/2] cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon

Message ID 20240930-b4-ti-cpufreq-am62-quirk-v1-1-b5e04f0f899b@ti.com (mailing list archive)
State New
Delegated to: viresh kumar
Headers show
Series ti-cpufreq: AM62: Backward compatibility for syscon and update offsets | expand

Commit Message

Dhruva Gole Sept. 30, 2024, 9:32 a.m. UTC
The AM625 syscon for efuse was being taken earlier from the wkup_conf node
where the entire wkup_conf was marked as "syscon". This is wrong and will
be fixed in the devicetree. However, whenever that does happen will end up
breaking this driver for that device because of the change in efuse offset.

Hence, to avoid breaking any sort of backward compatibility of devicetrees
use a quirk to distinguish and accordingly use 0x0 offset for the new
syscon node.

Suggested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
---
 drivers/cpufreq/ti-cpufreq.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index ba621ce1cdda694c98867422dbb7f10c0df2afef..7014cebb41e3490cadd14834e0c3e057419f2abb 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -93,6 +93,8 @@  struct ti_cpufreq_soc_data {
 	bool multi_regulator;
 /* Backward compatibility hack: Might have missing syscon */
 #define TI_QUIRK_SYSCON_MAY_BE_MISSING	0x1
+/* Backward compatibility hack: new syscon size is 1 register wide */
+#define TI_QUIRK_SYSCON_IS_SINGLE_REG	0x2
 	u8 quirks;
 };
 
@@ -318,6 +320,7 @@  static struct ti_cpufreq_soc_data am625_soc_data = {
 	.efuse_shift = 0x6,
 	.rev_offset = 0x0014,
 	.multi_regulator = false,
+	.quirks = TI_QUIRK_SYSCON_IS_SINGLE_REG,
 };
 
 static struct ti_cpufreq_soc_data am62a7_soc_data = {
@@ -354,6 +357,10 @@  static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data,
 
 	ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset,
 			  &efuse);
+
+	if (opp_data->soc_data->quirks & TI_QUIRK_SYSCON_IS_SINGLE_REG && ret == -EIO)
+		ret = regmap_read(opp_data->syscon, 0x0, &efuse);
+
 	if (opp_data->soc_data->quirks & TI_QUIRK_SYSCON_MAY_BE_MISSING && ret == -EIO) {
 		/* not a syscon register! */
 		void __iomem *regs = ioremap(OMAP3_SYSCON_BASE +