diff mbox series

[5/6] regulator: Add driver for MediaTek MT6328 PMIC regulators

Message ID 20241018081050.23592-6-y.oudjana@protonmail.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series MediaTek MT6735+MT6328 SoC/PMIC pair base support | expand

Commit Message

Yassine Oudjana Oct. 18, 2024, 8:10 a.m. UTC
From: Yassine Oudjana <y.oudjana@protonmail.com>

Add a driver for the regulators on the MT6328 PMIC.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
---
 drivers/regulator/Kconfig                  |   9 +
 drivers/regulator/Makefile                 |   1 +
 drivers/regulator/mt6328-regulator.c       | 479 +++++++++++++++++++++
 include/linux/regulator/mt6328-regulator.h |  49 +++
 4 files changed, 538 insertions(+)
 create mode 100644 drivers/regulator/mt6328-regulator.c
 create mode 100644 include/linux/regulator/mt6328-regulator.h

Comments

AngeloGioacchino Del Regno Oct. 21, 2024, 1:24 p.m. UTC | #1
Il 18/10/24 10:10, Yassine Oudjana ha scritto:
> From: Yassine Oudjana <y.oudjana@protonmail.com>
> 
> Add a driver for the regulators on the MT6328 PMIC.
> 
> Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
> ---
>   drivers/regulator/Kconfig                  |   9 +
>   drivers/regulator/Makefile                 |   1 +
>   drivers/regulator/mt6328-regulator.c       | 479 +++++++++++++++++++++
>   include/linux/regulator/mt6328-regulator.h |  49 +++
>   4 files changed, 538 insertions(+)
>   create mode 100644 drivers/regulator/mt6328-regulator.c
>   create mode 100644 include/linux/regulator/mt6328-regulator.h
> 
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 249933d6388dd..e9b9faff67f3a 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -862,6 +862,15 @@ config REGULATOR_MT6323
>   	  This driver supports the control of different power rails of device
>   	  through regulator interface.
>   
> +config REGULATOR_MT6328
> +	tristate "MediaTek MT6328 PMIC"
> +	depends on MFD_MT6397
> +	help
> +	  Say y here to select this option to enable the power regulator of
> +	  MediaTek MT6328 PMIC.
> +	  This driver supports the control of different power rails of device
> +	  through regulator interface.
> +
>   config REGULATOR_MT6331
>   	tristate "MediaTek MT6331 PMIC"
>   	depends on MFD_MT6397
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 9b69546fb3f65..c1a5a44413198 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -103,6 +103,7 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
>   obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
>   obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
>   obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
> +obj-$(CONFIG_REGULATOR_MT6328)	+= mt6328-regulator.o
>   obj-$(CONFIG_REGULATOR_MT6331)	+= mt6331-regulator.o
>   obj-$(CONFIG_REGULATOR_MT6332)	+= mt6332-regulator.o
>   obj-$(CONFIG_REGULATOR_MT6357)	+= mt6357-regulator.o
> diff --git a/drivers/regulator/mt6328-regulator.c b/drivers/regulator/mt6328-regulator.c
> new file mode 100644
> index 0000000000000..e15a64404f494
> --- /dev/null
> +++ b/drivers/regulator/mt6328-regulator.c
> @@ -0,0 +1,479 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MediaTek MT6328 regulator driver
> + * Based on MT6323 driver.
> + *
> + * Copyright (c) 2016 MediaTek Inc.
> + * Copyright (c) 2022 Yassine Oudjana <y.oudjana@protonmail.com>
> + */
> +

..snip..

> +/* The array is indexed by id(MT6328_ID_XXX) */
> +static struct mt6328_regulator_info mt6328_regulators[] = {
> +	MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
> +		buck_volt_range1, MT6328_VPA_CON9, MT6328_VPA_CON11, 0x3f,
> +		MT6328_VPA_CON12, MT6328_VPA_CON7),

Can you please fix the indentation?

Also, all of those entries do fit in two lines, I checked a couple of those
and always ended up with less than 90 columns anyway.

After which,

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Yassine Oudjana Oct. 21, 2024, 2:55 p.m. UTC | #2
On Mon, Oct 21 2024 at 15:24:51 +02:00:00, AngeloGioacchino Del Regno 
<angelogioacchino.delregno@collabora.com> wrote:
> Il 18/10/24 10:10, Yassine Oudjana ha scritto:
>> From: Yassine Oudjana <y.oudjana@protonmail.com>
>> 
>> Add a driver for the regulators on the MT6328 PMIC.
>> 
>> Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
>> ---
>>   drivers/regulator/Kconfig                  |   9 +
>>   drivers/regulator/Makefile                 |   1 +
>>   drivers/regulator/mt6328-regulator.c       | 479 
>> +++++++++++++++++++++
>>   include/linux/regulator/mt6328-regulator.h |  49 +++
>>   4 files changed, 538 insertions(+)
>>   create mode 100644 drivers/regulator/mt6328-regulator.c
>>   create mode 100644 include/linux/regulator/mt6328-regulator.h
>> 
>> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
>> index 249933d6388dd..e9b9faff67f3a 100644
>> --- a/drivers/regulator/Kconfig
>> +++ b/drivers/regulator/Kconfig
>> @@ -862,6 +862,15 @@ config REGULATOR_MT6323
>>   	  This driver supports the control of different power rails of 
>> device
>>   	  through regulator interface.
>>   +config REGULATOR_MT6328
>> +	tristate "MediaTek MT6328 PMIC"
>> +	depends on MFD_MT6397
>> +	help
>> +	  Say y here to select this option to enable the power regulator of
>> +	  MediaTek MT6328 PMIC.
>> +	  This driver supports the control of different power rails of 
>> device
>> +	  through regulator interface.
>> +
>>   config REGULATOR_MT6331
>>   	tristate "MediaTek MT6331 PMIC"
>>   	depends on MFD_MT6397
>> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
>> index 9b69546fb3f65..c1a5a44413198 100644
>> --- a/drivers/regulator/Makefile
>> +++ b/drivers/regulator/Makefile
>> @@ -103,6 +103,7 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
>>   obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
>> +obj-$(CONFIG_REGULATOR_MT6328)	+= mt6328-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6331)	+= mt6331-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6332)	+= mt6332-regulator.o
>>   obj-$(CONFIG_REGULATOR_MT6357)	+= mt6357-regulator.o
>> diff --git a/drivers/regulator/mt6328-regulator.c 
>> b/drivers/regulator/mt6328-regulator.c
>> new file mode 100644
>> index 0000000000000..e15a64404f494
>> --- /dev/null
>> +++ b/drivers/regulator/mt6328-regulator.c
>> @@ -0,0 +1,479 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * MediaTek MT6328 regulator driver
>> + * Based on MT6323 driver.
>> + *
>> + * Copyright (c) 2016 MediaTek Inc.
>> + * Copyright (c) 2022 Yassine Oudjana <y.oudjana@protonmail.com>
>> + */
>> +
> 
> ..snip..
> 
>> +/* The array is indexed by id(MT6328_ID_XXX) */
>> +static struct mt6328_regulator_info mt6328_regulators[] = {
>> +	MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
>> +		buck_volt_range1, MT6328_VPA_CON9, MT6328_VPA_CON11, 0x3f,
>> +		MT6328_VPA_CON12, MT6328_VPA_CON7),
> 
> Can you please fix the indentation?
> 
> Also, all of those entries do fit in two lines, I checked a couple of 
> those
> and always ended up with less than 90 columns anyway.

I can't seem to fit even the first one in 2 lines in under 90 columns :/
That is unless I don't indent the second line:

	MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, buck_volt_range1,
	MT6328_VPA_CON9, MT6328_VPA_CON11, 0x3f, MT6328_VPA_CON12, 
MT6328_VPA_CON7),

Which I don't think is what you meant by fixing the indentation. Can 
you show me an example? With 100 columns on the other hand it seems 
like they should fit.
>
AngeloGioacchino Del Regno Oct. 22, 2024, 9:49 a.m. UTC | #3
Il 21/10/24 16:55, Yassine Oudjana ha scritto:
> 
> On Mon, Oct 21 2024 at 15:24:51 +02:00:00, AngeloGioacchino Del Regno 
> <angelogioacchino.delregno@collabora.com> wrote:
>> Il 18/10/24 10:10, Yassine Oudjana ha scritto:
>>> From: Yassine Oudjana <y.oudjana@protonmail.com>
>>>
>>> Add a driver for the regulators on the MT6328 PMIC.
>>>
>>> Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
>>> ---
>>>   drivers/regulator/Kconfig                  |   9 +
>>>   drivers/regulator/Makefile                 |   1 +
>>>   drivers/regulator/mt6328-regulator.c       | 479 +++++++++++++++++++++
>>>   include/linux/regulator/mt6328-regulator.h |  49 +++
>>>   4 files changed, 538 insertions(+)
>>>   create mode 100644 drivers/regulator/mt6328-regulator.c
>>>   create mode 100644 include/linux/regulator/mt6328-regulator.h
>>>
>>> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
>>> index 249933d6388dd..e9b9faff67f3a 100644
>>> --- a/drivers/regulator/Kconfig
>>> +++ b/drivers/regulator/Kconfig
>>> @@ -862,6 +862,15 @@ config REGULATOR_MT6323
>>>         This driver supports the control of different power rails of device
>>>         through regulator interface.
>>>   +config REGULATOR_MT6328
>>> +    tristate "MediaTek MT6328 PMIC"
>>> +    depends on MFD_MT6397
>>> +    help
>>> +      Say y here to select this option to enable the power regulator of
>>> +      MediaTek MT6328 PMIC.
>>> +      This driver supports the control of different power rails of device
>>> +      through regulator interface.
>>> +
>>>   config REGULATOR_MT6331
>>>       tristate "MediaTek MT6331 PMIC"
>>>       depends on MFD_MT6397
>>> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
>>> index 9b69546fb3f65..c1a5a44413198 100644
>>> --- a/drivers/regulator/Makefile
>>> +++ b/drivers/regulator/Makefile
>>> @@ -103,6 +103,7 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
>>>   obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
>>>   obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
>>>   obj-$(CONFIG_REGULATOR_MT6323)    += mt6323-regulator.o
>>> +obj-$(CONFIG_REGULATOR_MT6328)    += mt6328-regulator.o
>>>   obj-$(CONFIG_REGULATOR_MT6331)    += mt6331-regulator.o
>>>   obj-$(CONFIG_REGULATOR_MT6332)    += mt6332-regulator.o
>>>   obj-$(CONFIG_REGULATOR_MT6357)    += mt6357-regulator.o
>>> diff --git a/drivers/regulator/mt6328-regulator.c b/drivers/regulator/mt6328- 
>>> regulator.c
>>> new file mode 100644
>>> index 0000000000000..e15a64404f494
>>> --- /dev/null
>>> +++ b/drivers/regulator/mt6328-regulator.c
>>> @@ -0,0 +1,479 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * MediaTek MT6328 regulator driver
>>> + * Based on MT6323 driver.
>>> + *
>>> + * Copyright (c) 2016 MediaTek Inc.
>>> + * Copyright (c) 2022 Yassine Oudjana <y.oudjana@protonmail.com>
>>> + */
>>> +
>>
>> ..snip..
>>
>>> +/* The array is indexed by id(MT6328_ID_XXX) */
>>> +static struct mt6328_regulator_info mt6328_regulators[] = {
>>> +    MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
>>> +        buck_volt_range1, MT6328_VPA_CON9, MT6328_VPA_CON11, 0x3f,
>>> +        MT6328_VPA_CON12, MT6328_VPA_CON7),
>>
>> Can you please fix the indentation?
>>
>> Also, all of those entries do fit in two lines, I checked a couple of those
>> and always ended up with less than 90 columns anyway.
> 
> I can't seem to fit even the first one in 2 lines in under 90 columns :/
> That is unless I don't indent the second line:
> 
>      MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, buck_volt_range1,
>      MT6328_VPA_CON9, MT6328_VPA_CON11, 0x3f, MT6328_VPA_CON12, MT6328_VPA_CON7),
> 
> Which I don't think is what you meant by fixing the indentation. Can you show me an 
> example? With 100 columns on the other hand it seems like they should fit.

I can get that one specifically to 96 columns... it's okay.
Just don't get over 100 columns please: if a few need 3 lines, they just do.

Anyway, here's an example:

MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, buck_volt_range1, MT6328_VPA_CON9,
	    MT6328_VPA_CON11, 0x3f, MT6328_VPA_CON12, MT6328_VPA_CON7),

...since I'm not sure that this will render correctly in the outgoing email, here's
another example:

MT6328_BUCK("buck_something", SOMETHING, params, blahblah, thisandthat,
             something_else),

Cheers,
Angelo

>>
> 
>
Mark Brown Oct. 22, 2024, 4:31 p.m. UTC | #4
On Fri, Oct 18, 2024 at 11:10:47AM +0300, Yassine Oudjana wrote:

> +static int mt6328_ldo_table_set_mode(struct regulator_dev *rdev, unsigned int mode)
> +{
> +	int ret, val = 0;
> +	struct mt6328_regulator_info *info = rdev_get_drvdata(rdev);
> +
> +	if (!info->modeset_mask) {
> +		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
> +			info->desc.name);
> +		return -EINVAL;
> +	}

If the regulator doesn't support setting modes it shouldn't have any
mode operations, then the core will take care of handling things
appropriately.

Otherwise this looks good.
diff mbox series

Patch

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 249933d6388dd..e9b9faff67f3a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -862,6 +862,15 @@  config REGULATOR_MT6323
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6328
+	tristate "MediaTek MT6328 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6328 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6331
 	tristate "MediaTek MT6331 PMIC"
 	depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 9b69546fb3f65..c1a5a44413198 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -103,6 +103,7 @@  obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6328)	+= mt6328-regulator.o
 obj-$(CONFIG_REGULATOR_MT6331)	+= mt6331-regulator.o
 obj-$(CONFIG_REGULATOR_MT6332)	+= mt6332-regulator.o
 obj-$(CONFIG_REGULATOR_MT6357)	+= mt6357-regulator.o
diff --git a/drivers/regulator/mt6328-regulator.c b/drivers/regulator/mt6328-regulator.c
new file mode 100644
index 0000000000000..e15a64404f494
--- /dev/null
+++ b/drivers/regulator/mt6328-regulator.c
@@ -0,0 +1,479 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MediaTek MT6328 regulator driver
+ * Based on MT6323 driver.
+ *
+ * Copyright (c) 2016 MediaTek Inc.
+ * Copyright (c) 2022 Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6328/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6328-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6328_LDO_TABLE_MODE_NORMAL	0
+#define MT6328_LDO_TABLE_MODE_LP	1
+
+/*
+ * MT6328 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ */
+struct mt6328_regulator_info {
+	struct regulator_desc desc;
+	u32 qi;
+	u32 vselon_reg;
+	u32 vselctrl_reg;
+	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+};
+
+#define MT6328_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		    vosel, vosel_mask, voselon, vosel_ctrl)		\
+[MT6328_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6328_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6328_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(13),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+}
+
+#define MT6328_LDO_RANGE(match, vreg, min, max, step, volt_ranges,	\
+			 enreg, enbit, vosel, vosel_mask, _modeset_reg,	\
+			 _modeset_mask)					\
+[MT6328_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6328_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6328_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+#define MT6328_LDO_TABLE(match, vreg, ldo_volt_table, enreg, enbit,	\
+			 vosel, vosel_mask, _modeset_reg, _modeset_mask)\
+[MT6328_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6328_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6328_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+#define MT6328_REG_FIXED(match, vreg, enreg, enbit, volt,		\
+		_modeset_reg, _modeset_mask)				\
+[MT6328_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6328_volt_fixed_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6328_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+static const struct linear_range buck_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000)
+};
+
+static const struct linear_range buck_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 0x7f, 6250)
+};
+
+static const struct linear_range buck_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(1200000, 0, 0x7f, 6250)
+};
+
+static const unsigned int ldo_volt_table1[] = {
+	1500000, 1800000, 2500000, 2800000
+};
+
+static const unsigned int ldo_volt_table2[] = {
+	3300000, 3400000, 3500000, 3600000
+};
+
+static const unsigned int ldo_volt_table3[] = {
+	0, 0, 0, 1800000, 1900000, 2000000, 2100000, 2200000
+};
+
+static const unsigned int ldo_volt_table4[] = {
+	1700000, 1800000, 1860000, 2760000, 3000000, 3100000
+};
+
+static const unsigned int ldo_volt_table5[] = {
+	1800000, 2900000, 3000000, 3300000
+};
+
+static const unsigned int ldo_volt_table6[] = {
+	2900000, 3000000, 3300000
+};
+
+static const unsigned int ldo_volt_table7[] = {
+	2500000, 2900000, 3000000, 3300000
+};
+
+static const unsigned int ldo_volt_table8[] = {
+	1300000, 1800000, 2900000, 3300000
+};
+
+static const unsigned int ldo_volt_table9[] = {
+	1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000
+};
+
+static const unsigned int ldo_volt_table10[] = {
+	1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000
+};
+
+static const unsigned int ldo_volt_table11[] = {
+	900000, 1000000, 1100000, 1200000, 1300000, 1500000
+};
+
+static const unsigned int ldo_volt_table12[] = {
+	1200000, 1300000, 1500000, 1800000, 1825000
+};
+
+static const unsigned int ldo_volt_table13[] = {
+	1200000, 1300000, 1500000, 1800000
+};
+
+static const unsigned int ldo_volt_table14[] = {
+	1240000, 1390000, 1540000
+};
+
+static const struct linear_range ldo_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250)
+};
+
+static int mt6328_get_status(struct regulator_dev *rdev)
+{
+	int ret;
+	u32 regval;
+	struct mt6328_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->desc.enable_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6328_ldo_table_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	int ret, val = 0;
+	struct mt6328_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = MT6328_LDO_TABLE_MODE_LP;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6328_LDO_TABLE_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+
+	return ret;
+}
+
+static unsigned int mt6328_ldo_table_get_mode(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	unsigned int mode;
+	int ret;
+	struct mt6328_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	if (val & 0x1)
+		mode = REGULATOR_MODE_STANDBY;
+	else
+		mode = REGULATOR_MODE_NORMAL;
+
+	return mode;
+}
+
+static const struct regulator_ops mt6328_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6328_get_status,
+};
+
+static const struct regulator_ops mt6328_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6328_get_status,
+	.set_mode = mt6328_ldo_table_set_mode,
+	.get_mode = mt6328_ldo_table_get_mode,
+};
+
+static const struct regulator_ops mt6328_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6328_get_status,
+	.set_mode = mt6328_ldo_table_set_mode,
+	.get_mode = mt6328_ldo_table_get_mode,
+};
+
+/* The array is indexed by id(MT6328_ID_XXX) */
+static struct mt6328_regulator_info mt6328_regulators[] = {
+	MT6328_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		buck_volt_range1, MT6328_VPA_CON9, MT6328_VPA_CON11, 0x3f,
+		MT6328_VPA_CON12, MT6328_VPA_CON7),
+	MT6328_BUCK("buck_vproc", VPROC, 600000, 1393750, 6250,
+		buck_volt_range2, MT6328_VPROC_CON9, MT6328_VPA_CON11, 0x7f,
+		MT6328_VPROC_CON12, MT6328_VPROC_CON7),
+	MT6328_BUCK("buck_vcore1", VCORE1, 600000, 1393750, 6250,
+		buck_volt_range2, MT6328_VCORE1_CON9, MT6328_VCORE1_CON11, 0x7f,
+		MT6328_VCORE1_CON12, MT6328_VCORE1_CON7),
+	MT6328_BUCK("buck_vsys22", VSYS22, 1200000, 1993750, 6250,
+		buck_volt_range3, MT6328_VSYS22_CON9, MT6328_VSYS22_CON11, 0x7f,
+		MT6328_VSYS22_CON12, MT6328_VSYS22_CON7),
+	MT6328_BUCK("buck_vlte", VLTE, 600000, 1393750, 6250,
+		buck_volt_range2, MT6328_VLTE_CON9, MT6328_VLTE_CON11, 0x7f,
+		MT6328_VLTE_CON12, MT6328_VLTE_CON7),
+	MT6328_REG_FIXED("ldo_vaux18", VAUX18, MT6328_VAUX18_CON0, 1, 1800000,
+		MT6328_VAUX18_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vtcxo_0", VTCXO_0, MT6328_VTCXO_0_CON0, 1, 2800000,
+		MT6328_VTCXO_0_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vtcxo_1", VTCXO_1, MT6328_VTCXO_1_CON0, 1, 2800000,
+		MT6328_VTCXO_1_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vaud28", VAUD28, MT6328_VAUD28_CON0, 1, 2800000,
+		MT6328_VAUD28_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vcn28", VCN28, MT6328_VCN28_CON0, 1, 2800000,
+		MT6328_VCN28_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vcama", VCAMA, ldo_volt_table1,
+		MT6328_VCAMA_CON0, 1, MT6328_ADLDO_ANA_CON5, 0x30,
+		0, 0),
+	MT6328_LDO_TABLE("ldo_vcn33_bt", VCN33_BT, ldo_volt_table2,
+		MT6328_VCN33_CON2, 1, MT6328_ADLDO_ANA_CON6, 0x70,
+		MT6328_VCN33_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table2,
+		MT6328_VCN33_CON1, 1, MT6328_ADLDO_ANA_CON6, 0x70,
+		MT6328_VCN33_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vusb33", VUSB33, MT6328_VUSB33_CON0, 1, 3300000,
+		MT6328_VUSB33_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vefuse", VEFUSE, ldo_volt_table3,
+		MT6328_VEFUSE_CON0, 1, MT6328_ADLDO_ANA_CON8, 0x70,
+		MT6328_VEFUSE_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vsim1", VSIM1, ldo_volt_table4,
+		MT6328_VSIM1_CON0, 1, MT6328_ADLDO_ANA_CON9, 0x70,
+		MT6328_VSIM1_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vsim2", VSIM2, ldo_volt_table4,
+		MT6328_VSIM2_CON0, 1, MT6328_ADLDO_ANA_CON10, 0x70,
+		MT6328_VSIM2_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vemc_3v3", VEMC_3V3, ldo_volt_table5,
+		MT6328_VEMC_3V3_CON0, 1, MT6328_ADLDO_ANA_CON11, 0x30,
+		MT6328_VEMC_3V3_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vmch", VMCH, ldo_volt_table6,
+		MT6328_VMCH_CON0, 1, MT6328_ADLDO_ANA_CON12, 0x30,
+		MT6328_VMCH_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vtref", VTREF, MT6328_VTREF_CON0, 1, 1800000,
+		0, 0),
+	MT6328_LDO_TABLE("ldo_vmc", VMC, ldo_volt_table5,
+		MT6328_VMC_CON0, 1, MT6328_DLDO_ANA_CON0, 0x30,
+		MT6328_VMC_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vcamaf", VCAMAF, ldo_volt_table9,
+		MT6328_VCAMAF_CON0, 1, MT6328_DLDO_ANA_CON1, 0x70,
+		MT6328_VCAMAF_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vibr", VIBR, ldo_volt_table9,
+		MT6328_VIBR_CON0, 1, MT6328_DLDO_ANA_CON2, 0x70,
+		MT6328_VIBR_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vio28", VIO28, MT6328_VIO28_CON0, 1, 2800000,
+		MT6328_VIO28_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vgp1", VGP1, ldo_volt_table10,
+		MT6328_VGP1_CON0, 1, MT6328_DLDO_ANA_CON4, 0x70,
+		MT6328_VGP1_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vcamd", VCAMD, ldo_volt_table11,
+		MT6328_VCAM_CON0, 1, MT6328_SLDO_ANA_CON2, 0x70,
+		MT6328_VCAM_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vrf18_0", VRF18_0, MT6328_VRF18_0_CON0, 1, 1825000,
+		MT6328_VRF18_0_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vrf18_1", VRF18_1, ldo_volt_table12,
+		MT6328_VRF18_1_CON0, 1, MT6328_SLDO_ANA_CON4, 0x30,
+		MT6328_VRF18_1_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vio18", VIO18, MT6328_VIO18_CON0, 1, 1800000,
+		MT6328_VIO18_CON0, BIT(0)),
+	MT6328_REG_FIXED("ldo_vcn18", VCN18, MT6328_VCN18_CON0, 1, 1800000,
+		MT6328_VCN18_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vcamio", VCAMIO, ldo_volt_table13,
+		MT6328_VCAMIO_CON0, 1, MT6328_SLDO_ANA_CON7, 0x30,
+		MT6328_VCAMIO_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vcamio", VCAMIO, ldo_volt_table13,
+		MT6328_VCAMIO_CON0, 1, MT6328_SLDO_ANA_CON7, 0x30,
+		MT6328_VCAMIO_CON0, BIT(0)),
+	MT6328_LDO_RANGE("ldo_vsram", VSRAM, 700000, 1493750, 6250,
+		ldo_volt_range1, MT6328_VSRAM_CON9, 1, MT6328_SLDO_ANA_CON9,
+		0x7f, MT6328_LDO_VSRAM_CON0, BIT(0)),
+	MT6328_LDO_TABLE("ldo_vm", VM, ldo_volt_table14,
+		MT6328_VM_CON0, 1, MT6328_SLDO_ANA_CON0, 0x3,
+		MT6328_VM_CON0, BIT(0)),
+};
+
+static int mt6328_set_buck_vosel_reg(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6328 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+	u32 regval;
+
+	for (i = 0; i < MT6328_MAX_REGULATOR; i++) {
+		if (mt6328_regulators[i].vselctrl_reg) {
+			if (regmap_read(mt6328->regmap,
+				mt6328_regulators[i].vselctrl_reg,
+				&regval) < 0) {
+				dev_err(&pdev->dev,
+					"Failed to read buck ctrl\n");
+				return -EIO;
+			}
+
+			if (regval & mt6328_regulators[i].vselctrl_mask) {
+				mt6328_regulators[i].desc.vsel_reg =
+				mt6328_regulators[i].vselon_reg;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mt6328_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6328 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+
+	/* Query buck controller to select activated voltage register part */
+	if (mt6328_set_buck_vosel_reg(pdev))
+		return -EIO;
+
+	for (i = 0; i < MT6328_MAX_REGULATOR; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6328_regulators[i];
+		config.regmap = mt6328->regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+				&mt6328_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6328_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6328_platform_ids[] = {
+	{ "mt6328-regulator" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6328_platform_ids);
+
+static struct platform_driver mt6328_regulator_driver = {
+	.driver = {
+		.name = "mt6328-regulator",
+	},
+	.probe = mt6328_regulator_probe,
+	.id_table = mt6328_platform_ids,
+};
+
+module_platform_driver(mt6328_regulator_driver);
+
+MODULE_AUTHOR("Yassine Oudjana <y.oudjana@protonmail.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6328 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/mt6328-regulator.h b/include/linux/regulator/mt6328-regulator.h
new file mode 100644
index 0000000000000..0f82aa88493b0
--- /dev/null
+++ b/include/linux/regulator/mt6328-regulator.h
@@ -0,0 +1,49 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Copyright (c) 2022 Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+#ifndef __LINUX_REGULATOR_MT6328_H
+#define __LINUX_REGULATOR_MT6328_H
+
+enum {
+	MT6328_ID_VPA = 0,
+	MT6328_ID_VPROC,
+	MT6328_ID_VCORE1,
+	MT6328_ID_VSYS22,
+	MT6328_ID_VLTE,
+	MT6328_ID_VAUX18,
+	MT6328_ID_VTCXO_0,
+	MT6328_ID_VTCXO_1,
+	MT6328_ID_VAUD28,
+	MT6328_ID_VCN28,
+	MT6328_ID_VCAMA,
+	MT6328_ID_VCN33_BT,
+	MT6328_ID_VCN33_WIFI,
+	MT6328_ID_VUSB33,
+	MT6328_ID_VEFUSE,
+	MT6328_ID_VSIM1,
+	MT6328_ID_VSIM2,
+	MT6328_ID_VEMC_3V3,
+	MT6328_ID_VMCH,
+	MT6328_ID_VTREF,
+	MT6328_ID_VMC,
+	MT6328_ID_VCAMAF,
+	MT6328_ID_VIBR,
+	MT6328_ID_VIO28,
+	MT6328_ID_VGP1,
+	MT6328_ID_VCAMD,
+	MT6328_ID_VRF18_0,
+	MT6328_ID_VRF18_1,
+	MT6328_ID_VIO18,
+	MT6328_ID_VCN18,
+	MT6328_ID_VCAMIO,
+	MT6328_ID_VSRAM,
+	MT6328_ID_VM,
+	MT6328_ID_RG_MAX,
+};
+
+#define MT6328_MAX_REGULATOR	MT6328_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6328_H */