@@ -17,13 +17,6 @@ config CPU_FREQ_CBE_PMI
frequencies. Using PMI, the processor will not only be able to run at
lower speed, but also at lower core voltage.
-config CPU_FREQ_MAPLE
- bool "Support for Maple 970FX Evaluation Board"
- depends on PPC_MAPLE
- help
- This adds support for frequency switching on Maple 970FX
- Evaluation Board and compatible boards (IBM JS2x blades).
-
config CPU_FREQ_PMAC
bool "Support for Apple PowerBooks"
depends on ADB_PMU && PPC32
@@ -92,7 +92,6 @@ obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o
ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o
-obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o
obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
deleted file mode 100644
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Dmitry Eremin-Solenikov
- * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
- *
- * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
- * that is iMac G5 and latest single CPU desktop.
- */
-
-#undef DEBUG
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/completion.h>
-#include <linux/mutex.h>
-#include <linux/time.h>
-#include <linux/of.h>
-
-#define DBG(fmt...) pr_debug(fmt)
-
-/* see 970FX user manual */
-
-#define SCOM_PCR 0x0aa001 /* PCR scom addr */
-
-#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
-#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
-#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
-#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
-#define PCR_SPEED_MASK 0x000e0000U /* speed mask */
-#define PCR_SPEED_SHIFT 17
-#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
-#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
-#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
-#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
-#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
-#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
-
-#define SCOM_PSR 0x408001 /* PSR scom addr */
-/* warning: PSR is a 64 bits register */
-#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
-#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
-#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
-#define PSR_CUR_SPEED_SHIFT (56)
-
-/*
- * The G5 only supports two frequencies (Quarter speed is not supported)
- */
-#define CPUFREQ_HIGH 0
-#define CPUFREQ_LOW 1
-
-static struct cpufreq_frequency_table maple_cpu_freqs[] = {
- {0, CPUFREQ_HIGH, 0},
- {0, CPUFREQ_LOW, 0},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-/* Power mode data is an array of the 32 bits PCR values to use for
- * the various frequencies, retrieved from the device-tree
- */
-static int maple_pmode_cur;
-
-static const u32 *maple_pmode_data;
-static int maple_pmode_max;
-
-/*
- * SCOM based frequency switching for 970FX rev3
- */
-static int maple_scom_switch_freq(int speed_mode)
-{
- unsigned long flags;
- int to;
-
- local_irq_save(flags);
-
- /* Clear PCR high */
- scom970_write(SCOM_PCR, 0);
- /* Clear PCR low */
- scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
- /* Set PCR low */
- scom970_write(SCOM_PCR, PCR_HILO_SELECT |
- maple_pmode_data[speed_mode]);
-
- /* Wait for completion */
- for (to = 0; to < 10; to++) {
- unsigned long psr = scom970_read(SCOM_PSR);
-
- if ((psr & PSR_CMD_RECEIVED) == 0 &&
- (((psr >> PSR_CUR_SPEED_SHIFT) ^
- (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
- == 0)
- break;
- if (psr & PSR_CMD_COMPLETED)
- break;
- udelay(100);
- }
-
- local_irq_restore(flags);
-
- maple_pmode_cur = speed_mode;
- ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul;
-
- return 0;
-}
-
-static int maple_scom_query_freq(void)
-{
- unsigned long psr = scom970_read(SCOM_PSR);
- int i;
-
- for (i = 0; i <= maple_pmode_max; i++)
- if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
- (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
- break;
- return i;
-}
-
-/*
- * Common interface to the cpufreq core
- */
-
-static int maple_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int index)
-{
- return maple_scom_switch_freq(index);
-}
-
-static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
-{
- return maple_cpu_freqs[maple_pmode_cur].frequency;
-}
-
-static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
- cpufreq_generic_init(policy, maple_cpu_freqs, 12000);
- return 0;
-}
-
-static struct cpufreq_driver maple_cpufreq_driver = {
- .name = "maple",
- .flags = CPUFREQ_CONST_LOOPS,
- .init = maple_cpufreq_cpu_init,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = maple_cpufreq_target,
- .get = maple_cpufreq_get_speed,
- .attr = cpufreq_generic_attr,
-};
-
-static int __init maple_cpufreq_init(void)
-{
- struct device_node *cpunode;
- unsigned int psize;
- unsigned long max_freq;
- const u32 *valp;
- u32 pvr_hi;
- int rc = -ENODEV;
-
- /*
- * Behave here like powermac driver which checks machine compatibility
- * to ease merging of two drivers in future.
- */
- if (!of_machine_is_compatible("Momentum,Maple") &&
- !of_machine_is_compatible("Momentum,Apache"))
- return 0;
-
- /* Get first CPU node */
- cpunode = of_cpu_device_node_get(0);
- if (cpunode == NULL) {
- pr_err("Can't find any CPU 0 node\n");
- goto bail_noprops;
- }
-
- /* Check 970FX for now */
- /* we actually don't care on which CPU to access PVR */
- pvr_hi = PVR_VER(mfspr(SPRN_PVR));
- if (pvr_hi != 0x3c && pvr_hi != 0x44) {
- pr_err("Unsupported CPU version (%x)\n", pvr_hi);
- goto bail_noprops;
- }
-
- /* Look for the powertune data in the device-tree */
- /*
- * On Maple this property is provided by PIBS in dual-processor config,
- * not provided by PIBS in CPU0 config and also not provided by SLOF,
- * so YMMV
- */
- maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize);
- if (!maple_pmode_data) {
- DBG("No power-mode-data !\n");
- goto bail_noprops;
- }
- maple_pmode_max = psize / sizeof(u32) - 1;
-
- /*
- * From what I see, clock-frequency is always the maximal frequency.
- * The current driver can not slew sysclk yet, so we really only deal
- * with powertune steps for now. We also only implement full freq and
- * half freq in this version. So far, I haven't yet seen a machine
- * supporting anything else.
- */
- valp = of_get_property(cpunode, "clock-frequency", NULL);
- if (!valp)
- goto bail_noprops;
- max_freq = (*valp)/1000;
- maple_cpu_freqs[0].frequency = max_freq;
- maple_cpu_freqs[1].frequency = max_freq/2;
-
- /* Force apply current frequency to make sure everything is in
- * sync (voltage is right for example). Firmware may leave us with
- * a strange setting ...
- */
- msleep(10);
- maple_pmode_cur = -1;
- maple_scom_switch_freq(maple_scom_query_freq());
-
- pr_info("Registering Maple CPU frequency driver\n");
- pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
- maple_cpu_freqs[1].frequency/1000,
- maple_cpu_freqs[0].frequency/1000,
- maple_cpu_freqs[maple_pmode_cur].frequency/1000);
-
- rc = cpufreq_register_driver(&maple_cpufreq_driver);
-
-bail_noprops:
- of_node_put(cpunode);
-
- return rc;
-}
-
-module_init(maple_cpufreq_init);
-
-
-MODULE_DESCRIPTION("cpufreq driver for Maple 970FX/970MP boards");
-MODULE_LICENSE("GPL");
This driver is no longer buildable since the PPC_MAPLE platform was removed, see commit 62f8f307c80e ("powerpc/64: Remove maple platform"). Remove the driver. Note that the comment in the driver says it supports "SMU & 970FX based G5 Macs", but that's not true, that comment was copied from pmac64-cpufreq.c, which still exists and continues to support those machines. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> --- drivers/cpufreq/Kconfig.powerpc | 7 - drivers/cpufreq/Makefile | 1 - drivers/cpufreq/maple-cpufreq.c | 242 -------------------------------- 3 files changed, 250 deletions(-) delete mode 100644 drivers/cpufreq/maple-cpufreq.c The removal commit is in the powerpc/next branch: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/log/?h=next I can take this via the powerpc tree if that's easiest, let me know.