diff mbox series

[3/3] power: supply: bq24190: Add BQ24297 support

Message ID 20241116203648.169100-3-hdegoede@redhat.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series [1/3] dt-bindings: power: supply: bq24190: Add BQ24297 compatible | expand

Commit Message

Hans de Goede Nov. 16, 2024, 8:36 p.m. UTC 
The BQ24297 is identical to the BQ24296 except that it uses USB D+ / D-
data-lines for charger-type (max. input-current) detection instead of
a PSEL input pin.

This is the same difference as between the already supported BQ24190
(D+ / D-) and the BQ24192 (PSEL).

Note just like with the BQ24190 vs BQ24192 there is no difference how
the charger-IC works at the register-level. The only difference is in
the external hardware interface.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/power/supply/bq24190_charger.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 4881cbd0e672..a6a9f3ede34a 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -152,6 +152,7 @@ 
 #define BQ24296_REG_VPRS_PN_MASK		(BIT(7) | BIT(6) | BIT(5))
 #define BQ24296_REG_VPRS_PN_SHIFT		5
 #define BQ24296_REG_VPRS_PN_24296		0x1
+#define BQ24296_REG_VPRS_PN_24297		0x3
 #define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
 #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
 #define BQ24190_REG_VPRS_DEV_REG_MASK		(BIT(1) | BIT(0))
@@ -208,6 +209,7 @@  enum bq24190_chip {
 	BQ24192i,
 	BQ24196,
 	BQ24296,
+	BQ24297,
 };
 
 /*
@@ -1904,6 +1906,7 @@  static int bq24296_check_chip(struct bq24190_dev_info *bdi)
 
 	switch (v) {
 	case BQ24296_REG_VPRS_PN_24296:
+	case BQ24296_REG_VPRS_PN_24297:
 		break;
 	default:
 		dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
@@ -2033,6 +2036,17 @@  static const struct bq24190_chip_info bq24190_chip_info_tbl[] = {
 		.ichg_array_size = BQ24296_CCC_ICHG_VALUES_LEN,
 #ifdef CONFIG_REGULATOR
 		.vbus_desc = &bq24296_vbus_desc,
+#endif
+		.check_chip = bq24296_check_chip,
+		.set_chg_config = bq24296_battery_set_chg_config,
+		.ntc_fault_mask = BQ24296_REG_F_NTC_FAULT_MASK,
+		.get_ntc_status = bq24296_charger_get_ntc_status,
+		.set_otg_vbus = bq24296_set_otg_vbus,
+	},
+	[BQ24297] = {
+		.ichg_array_size = BQ24296_CCC_ICHG_VALUES_LEN,
+#ifdef CONFIG_REGULATOR
+		.vbus_desc = &bq24296_vbus_desc,
 #endif
 		.check_chip = bq24296_check_chip,
 		.set_chg_config = bq24296_battery_set_chg_config,
@@ -2296,6 +2310,7 @@  static const struct i2c_device_id bq24190_i2c_ids[] = {
 	{ "bq24192i", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24192i] },
 	{ "bq24196", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24196] },
 	{ "bq24296", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24296] },
+	{ "bq24297", (kernel_ulong_t)&bq24190_chip_info_tbl[BQ24297] },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
@@ -2306,6 +2321,7 @@  static const struct of_device_id bq24190_of_match[] = {
 	{ .compatible = "ti,bq24192i", .data = &bq24190_chip_info_tbl[BQ24192i] },
 	{ .compatible = "ti,bq24196", .data = &bq24190_chip_info_tbl[BQ24196] },
 	{ .compatible = "ti,bq24296", .data = &bq24190_chip_info_tbl[BQ24296] },
+	{ .compatible = "ti,bq24297", .data = &bq24190_chip_info_tbl[BQ24297] },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bq24190_of_match);