@@ -21855,6 +21855,14 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
F: drivers/media/i2c/st-mipid02.c
+ST STC3117 FUEL GAUGE DRIVER
+M: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
+M: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/power/supply/st,stc3117.yaml
+F: drivers/power/supply/stc3117_fuel_gauge.c
+
ST STM32 FIREWALL
M: Gatien Chevallier <gatien.chevallier@foss.st.com>
S: Maintained
@@ -908,6 +908,13 @@ config FUEL_GAUGE_SC27XX
Say Y here to enable support for fuel gauge with SC27XX
PMIC chips.
+config FUEL_GAUGE_STC3117
+ tristate "STMicroelectronics STC3117 fuel gauge driver"
+ depends on I2C
+ help
+ Say Y here to enable support for fuel gauge with STC3117
+ chip.
+
config CHARGER_UCS1002
tristate "Microchip UCS1002 USB Port Power Controller"
depends on I2C
@@ -107,6 +107,7 @@ obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
obj-$(CONFIG_CHARGER_CROS_PCHG) += cros_peripheral_charger.o
obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
+obj-$(CONFIG_FUEL_GAUGE_STC3117) += stc3117_fuel_gauge.o
obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
obj-$(CONFIG_CHARGER_BD99954) += bd99954-charger.o
obj-$(CONFIG_CHARGER_WILCO) += wilco-charger.o
new file mode 100644