@@ -1272,6 +1272,10 @@ void play_dead_common(void)
local_irq_disable();
}
+/*
+ * We need to flush the caches before going to sleep, lest we have
+ * dirty data in our caches when we come back up.
+ */
void __noreturn mwait_play_dead(unsigned int eax_hint)
{
struct mwait_cpu_dead *md = this_cpu_ptr(&mwait_cpu_dead);
@@ -1317,52 +1321,6 @@ void __noreturn mwait_play_dead(unsigned int eax_hint)
}
}
-/*
- * We need to flush the caches before going to sleep, lest we have
- * dirty data in our caches when we come back up.
- */
-static inline void mwait_play_dead_cpuid_hint(void)
-{
- unsigned int eax, ebx, ecx, edx;
- unsigned int highest_cstate = 0;
- unsigned int highest_subcstate = 0;
- int i;
-
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
- boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)
- return;
- if (!this_cpu_has(X86_FEATURE_MWAIT))
- return;
- if (!this_cpu_has(X86_FEATURE_CLFLUSH))
- return;
- if (__this_cpu_read(cpu_info.cpuid_level) < CPUID_MWAIT_LEAF)
- return;
-
- eax = CPUID_MWAIT_LEAF;
- ecx = 0;
- native_cpuid(&eax, &ebx, &ecx, &edx);
-
- /*
- * eax will be 0 if EDX enumeration is not valid.
- * Initialized below to cstate, sub_cstate value when EDX is valid.
- */
- if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED)) {
- eax = 0;
- } else {
- edx >>= MWAIT_SUBSTATE_SIZE;
- for (i = 0; i < 7 && edx; i++, edx >>= MWAIT_SUBSTATE_SIZE) {
- if (edx & MWAIT_SUBSTATE_MASK) {
- highest_cstate = i;
- highest_subcstate = edx & MWAIT_SUBSTATE_MASK;
- }
- }
- eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
- (highest_subcstate - 1);
- }
-
- mwait_play_dead(eax);
-}
-
/*
* Kick all "offline" CPUs out of mwait on kexec(). See comment in
* mwait_play_dead().
@@ -1413,9 +1371,9 @@ void native_play_dead(void)
play_dead_common();
tboot_shutdown(TB_SHUTDOWN_WFS);
- mwait_play_dead_cpuid_hint();
- if (cpuidle_play_dead())
- hlt_play_dead();
+ /* Below returns only on error. */
+ cpuidle_play_dead();
+ hlt_play_dead();
}
#else /* ... !CONFIG_HOTPLUG_CPU */
The current algorithm* for looking up the mwait hint for the deepest cstate, in mwait_play_dead_cpuid_hint() code works by inspecting CPUID leaf 0x5 and calculates the mwait hint based on the number of reported substates. This approach depends on the hints associated with them to be continuous in the range [0, NUM_SUBSTATES-1]. This continuity is not documented and is not met on the recent Intel platforms. * The current algorithm is implemented in the for loop inspecting edx in mwait_play_dead_cpuid_hint(). For example, Intel's Sierra Forest report two cstates with two substates each in cpuid leaf 0x5: Name* target cstate target subcstate (mwait hint) =========================================================== C1 0x00 0x00 C1E 0x00 0x01 -- 0x10 ---- C6S 0x20 0x22 C6P 0x20 0x23 -- 0x30 ---- /* No more (sub)states all the way down to the end. */ =========================================================== * Names of the cstates are not included in the CPUID leaf 0x5, they are taken from the product specific documentation. Notice that hints 0x20 and 0x21 are skipped entirely for the target cstate 0x20 (C6), being a cause of the problem for the current cpuid leaf 0x5 algorithm. Remove the old implementation of play_dead MWAIT hint calculation based on the CPUID leaf 0x5 in mwait_play_dead_cpuid_hint() and delegate calling of the mwait_play_dead() to the idle driver. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> --- arch/x86/kernel/smpboot.c | 56 +++++---------------------------------- 1 file changed, 7 insertions(+), 49 deletions(-)