diff mbox series

[V10,6/7] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider

Message ID 20250324183203.30127-7-quic_rlaggysh@quicinc.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series Add EPSS L3 provider support on SA8775P SoC | expand

Commit Message

Raviteja Laggyshetty March 24, 2025, 6:32 p.m. UTC 
Add Epoch Subsystem (EPSS) L3 interconnect provider node on SA8775P
SoCs. L3 instances on this SoC are same as SM8250 and SC7280 SoCs.
These SoCs use EPSS_L3_PERF register instead of REG_L3_VOTE register for
programming the perf level. This is taken care in the data associated
with the target specific compatible. Since, the HW is same in the all
SoCs with EPSS support, using the same generic compatible for all.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Dmitry Baryshkov March 26, 2025, 5:41 p.m. UTC | #1 
On Mon, Mar 24, 2025 at 06:32:02PM +0000, Raviteja Laggyshetty wrote:
> Add Epoch Subsystem (EPSS) L3 interconnect provider node on SA8775P
> SoCs. L3 instances on this SoC are same as SM8250 and SC7280 SoCs.
> These SoCs use EPSS_L3_PERF register instead of REG_L3_VOTE register for
> programming the perf level. This is taken care in the data associated
> with the target specific compatible. Since, the HW is same in the all
> SoCs with EPSS support, using the same generic compatible for all.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index a904960359d7..fac5dfb147fd 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -11,6 +11,7 @@ 
 #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
 #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/firmware/qcom,scm.h>
@@ -4797,6 +4798,15 @@  rpmhpd_opp_turbo_l1: opp-9 {
 			};
 		};
 
+		epss_l3_cl0: interconnect@18590000 {
+			compatible = "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18590000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@18591000 {
 			compatible = "qcom,sa8775p-cpufreq-epss",
 				     "qcom,cpufreq-epss";
@@ -4814,6 +4824,15 @@  cpufreq_hw: cpufreq@18591000 {
 			#freq-domain-cells = <1>;
 		};
 
+		epss_l3_cl1: interconnect@18592000 {
+			compatible = "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18592000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		remoteproc_gpdsp0: remoteproc@20c00000 {
 			compatible = "qcom,sa8775p-gpdsp0-pas";
 			reg = <0x0 0x20c00000 0x0 0x10000>;