| Message ID | 3a643792408aa4a15cbf89c4ac9e61a63e443981.1475743411.git.stwiss.opensource@diasemi.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thu, Oct 06, 2016 at 09:43:31AM +0100, Steve Twiss wrote: > From: Steve Twiss <stwiss.opensource@diasemi.com> > > Device tree binding information for DA9062 and DA9061 thermal junction > temperature monitor. > > Binding descriptions for the DA9061 and DA9062 thermal TJUNC supervisor > device driver, using a single THERMAL_TRIP_HOT trip-wire and allowing for a > configurable polling period for over-temperature polling. > > Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> > > --- > This patch applies against linux-next and v4.8 > > Hi, > > This patch depends on the acceptance of the main code for the onkey: > [PATCH V1 5/10] thermal: da9061: TJUNC temperature driver > > Regards, > Steve Twiss, Dialog Semiconductor Ltd. > > > .../devicetree/bindings/thermal/da9062-thermal.txt | 30 ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/da9062-thermal.txt Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt new file mode 100644 index 0000000..338de2f --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt @@ -0,0 +1,30 @@ +* Dialog DA9062/61 TJUNC Thermal Module + +This module is part of the DA9061/DA9062. For more details about entire +DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt + +Junction temperature thermal module uses an interrupt signal to identify +high THERMAL_TRIP_HOT temperatures for the PMIC device. + +Required properties: + +- compatible: should be one of: + dlg,da9061-thermal + dlg,da9062-thermal + +Optional properties: + +- dlg,tjunc-temp-polling-period-ms : Specify the polling period, measured + in milliseconds, between thermal zone device update checks. + +Example: + + pmic0: da9062@58 { + + thermal { + compatible = "dlg,da9062-thermal"; + dlg,tjunc-temp-polling-period-ms = <3000>; + }; + + }; +