@@ -66,6 +66,8 @@ import platform
from datetime import datetime
import struct
import ConfigParser
+from threading import Thread
+import subprocess
# ----------------- CLASSES --------------------
@@ -75,7 +77,7 @@ import ConfigParser
# store system values and test parameters
class SystemValues:
ansi = False
- version = '4.2'
+ version = '4.3'
verbose = False
addlogs = False
mindevlen = 0.001
@@ -117,13 +119,16 @@ class SystemValues:
usetracemarkers = True
usekprobes = True
usedevsrc = False
+ useprocmon = False
notestrun = False
+ mixedphaseheight = True
devprops = dict()
- postresumetime = 0
+ predelay = 0
+ postdelay = 0
+ procexecfmt = 'ps - (?P<ps>.*)$'
devpropfmt = '# Device Properties: .*'
tracertypefmt = '# tracer: (?P<t>.*)'
firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$'
- postresumefmt = '# post resume time (?P<t>[0-9]*)$'
stampfmt = '# suspend-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\
'(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\
' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$'
@@ -152,20 +157,22 @@ class SystemValues:
'CPU_OFF': {
'func':'_cpu_down',
'args_x86_64': {'cpu':'%di:s32'},
- 'format': 'CPU_OFF[{cpu}]',
- 'mask': 'CPU_.*_DOWN'
+ 'format': 'CPU_OFF[{cpu}]'
},
'CPU_ON': {
'func':'_cpu_up',
'args_x86_64': {'cpu':'%di:s32'},
- 'format': 'CPU_ON[{cpu}]',
- 'mask': 'CPU_.*_UP'
+ 'format': 'CPU_ON[{cpu}]'
},
}
dev_tracefuncs = {
# general wait/delay/sleep
'msleep': { 'args_x86_64': {'time':'%di:s32'} },
+ 'schedule_timeout_uninterruptible': { 'args_x86_64': {'timeout':'%di:s32'} },
+ 'schedule_timeout': { 'args_x86_64': {'timeout':'%di:s32'} },
'udelay': { 'func':'__const_udelay', 'args_x86_64': {'loops':'%di:s32'} },
+ 'usleep_range': { 'args_x86_64': {'min':'%di:s32', 'max':'%si:s32'} },
+ 'mutex_lock_slowpath': { 'func':'__mutex_lock_slowpath' },
'acpi_os_stall': dict(),
# ACPI
'acpi_resume_power_resources': dict(),
@@ -175,19 +182,27 @@ class SystemValues:
# ATA
'ata_eh_recover': { 'args_x86_64': {'port':'+36(%di):s32'} },
# i915
- 'i915_gem_restore_gtt_mappings': dict(),
+ 'i915_gem_resume': dict(),
+ 'i915_restore_state': dict(),
'intel_opregion_setup': dict(),
+ 'g4x_pre_enable_dp': dict(),
+ 'vlv_pre_enable_dp': dict(),
+ 'chv_pre_enable_dp': dict(),
+ 'g4x_enable_dp': dict(),
+ 'vlv_enable_dp': dict(),
+ 'intel_hpd_init': dict(),
+ 'intel_opregion_register': dict(),
'intel_dp_detect': dict(),
'intel_hdmi_detect': dict(),
'intel_opregion_init': dict(),
+ 'intel_fbdev_set_suspend': dict(),
}
kprobes_postresume = [
{
'name': 'ataportrst',
'func': 'ata_eh_recover',
'args': {'port':'+36(%di):s32'},
- 'format': 'ata{port}_port_reset',
- 'mask': 'ata.*_port_reset'
+ 'format': 'ata{port}_port_reset'
}
]
kprobes = dict()
@@ -214,6 +229,13 @@ class SystemValues:
if num < 0 or num > 6:
return
self.timeformat = '%.{0}f'.format(num)
+ def setOutputFolder(self, value):
+ args = dict()
+ n = datetime.now()
+ args['date'] = n.strftime('%y%m%d')
+ args['time'] = n.strftime('%H%M%S')
+ args['hostname'] = self.hostname
+ self.outdir = value.format(**args)
def setOutputFile(self):
if((self.htmlfile == '') and (self.dmesgfile != '')):
m = re.match('(?P<name>.*)_dmesg\.txt$', self.dmesgfile)
@@ -253,8 +275,12 @@ class SystemValues:
self.testdir+'/'+self.prefix+'_'+self.suspendmode+'.html'
if not os.path.isdir(self.testdir):
os.mkdir(self.testdir)
- def setDeviceFilter(self, devnames):
- self.devicefilter = string.split(devnames)
+ def setDeviceFilter(self, value):
+ self.devicefilter = []
+ if value:
+ value = value.split(',')
+ for i in value:
+ self.devicefilter.append(i.strip())
def rtcWakeAlarmOn(self):
os.system('echo 0 > '+self.rtcpath+'/wakealarm')
outD = open(self.rtcpath+'/date', 'r').read().strip()
@@ -351,17 +377,11 @@ class SystemValues:
fp = open(self.tpath+'set_graph_function', 'w')
fp.write(flist)
fp.close()
- def kprobeMatch(self, name, target):
- if name not in self.kprobes:
- return False
- if re.match(self.kprobes[name]['mask'], target):
- return True
- return False
def basicKprobe(self, name):
- self.kprobes[name] = {'name': name,'func': name,'args': dict(),'format': name,'mask': name}
+ self.kprobes[name] = {'name': name,'func': name,'args': dict(),'format': name}
def defaultKprobe(self, name, kdata):
k = kdata
- for field in ['name', 'format', 'mask', 'func']:
+ for field in ['name', 'format', 'func']:
if field not in k:
k[field] = name
archargs = 'args_'+platform.machine()
@@ -625,8 +645,8 @@ class DevProps:
if self.xtraclass:
return ' '+self.xtraclass
if self.async:
- return ' async'
- return ' sync'
+ return ' async_device'
+ return ' sync_device'
# Class: DeviceNode
# Description:
@@ -671,19 +691,31 @@ class Data:
end = 0.0 # test end
tSuspended = 0.0 # low-level suspend start
tResumed = 0.0 # low-level resume start
+ tKernSus = 0.0 # kernel level suspend start
+ tKernRes = 0.0 # kernel level resume end
tLow = 0.0 # time spent in low-level suspend (standby/freeze)
fwValid = False # is firmware data available
fwSuspend = 0 # time spent in firmware suspend
fwResume = 0 # time spent in firmware resume
dmesgtext = [] # dmesg text file in memory
+ pstl = 0 # process timeline
testnumber = 0
idstr = ''
html_device_id = 0
stamp = 0
outfile = ''
- dev_ubiquitous = ['msleep', 'udelay']
+ devpids = []
+ dev_ubiquitous = [
+ 'msleep',
+ 'schedule_timeout_uninterruptible',
+ 'schedule_timeout',
+ 'udelay',
+ 'usleep_range',
+ 'mutex_lock_slowpath'
+ ]
def __init__(self, num):
idchar = 'abcdefghijklmnopqrstuvwxyz'
+ self.pstl = dict()
self.testnumber = num
self.idstr = idchar[num]
self.dmesgtext = []
@@ -714,16 +746,10 @@ class Data:
self.devicegroups = []
for phase in self.phases:
self.devicegroups.append([phase])
- def getStart(self):
- return self.dmesg[self.phases[0]]['start']
def setStart(self, time):
self.start = time
- self.dmesg[self.phases[0]]['start'] = time
- def getEnd(self):
- return self.dmesg[self.phases[-1]]['end']
def setEnd(self, time):
self.end = time
- self.dmesg[self.phases[-1]]['end'] = time
def isTraceEventOutsideDeviceCalls(self, pid, time):
for phase in self.phases:
list = self.dmesg[phase]['list']
@@ -733,39 +759,70 @@ class Data:
time < d['end']):
return False
return True
- def targetDevice(self, phaselist, start, end, pid=-1):
+ def sourcePhase(self, start, end):
+ for phase in self.phases:
+ pstart = self.dmesg[phase]['start']
+ pend = self.dmesg[phase]['end']
+ if start <= pend:
+ return phase
+ return 'resume_complete'
+ def sourceDevice(self, phaselist, start, end, pid, type):
tgtdev = ''
for phase in phaselist:
list = self.dmesg[phase]['list']
for devname in list:
dev = list[devname]
- if(pid >= 0 and dev['pid'] != pid):
+ # pid must match
+ if dev['pid'] != pid:
continue
devS = dev['start']
devE = dev['end']
- if(start < devS or start >= devE or end <= devS or end > devE):
- continue
+ if type == 'device':
+ # device target event is entirely inside the source boundary
+ if(start < devS or start >= devE or end <= devS or end > devE):
+ continue
+ elif type == 'thread':
+ # thread target event will expand the source boundary
+ if start < devS:
+ dev['start'] = start
+ if end > devE:
+ dev['end'] = end
tgtdev = dev
break
return tgtdev
def addDeviceFunctionCall(self, displayname, kprobename, proc, pid, start, end, cdata, rdata):
- machstart = self.dmesg['suspend_machine']['start']
- machend = self.dmesg['resume_machine']['end']
- tgtdev = self.targetDevice(self.phases, start, end, pid)
- if not tgtdev and start >= machstart and end < machend:
- # device calls in machine phases should be serial
- tgtdev = self.targetDevice(['suspend_machine', 'resume_machine'], start, end)
+ tgtphase = self.sourcePhase(start, end)
+ # try to place the call in a device
+ tgtdev = self.sourceDevice(self.phases, start, end, pid, 'device')
+ # calls with device pids that occur outside dev bounds are dropped
+ if not tgtdev and pid in self.devpids:
+ return False
+ # try to place the call in a thread
+ if not tgtdev:
+ tgtdev = self.sourceDevice([tgtphase], start, end, pid, 'thread')
+ # create new thread blocks, expand as new calls are found
if not tgtdev:
- if 'scsi_eh' in proc:
- self.newActionGlobal(proc, start, end, pid)
- self.addDeviceFunctionCall(displayname, kprobename, proc, pid, start, end, cdata, rdata)
+ if proc == '<...>':
+ threadname = 'kthread-%d' % (pid)
else:
- vprint('IGNORE: %s[%s](%d) [%f - %f] | %s | %s | %s' % (displayname, kprobename,
- pid, start, end, cdata, rdata, proc))
+ threadname = '%s-%d' % (proc, pid)
+ if(start < self.start):
+ self.setStart(start)
+ if(end > self.end):
+ self.setEnd(end)
+ self.newAction(tgtphase, threadname, pid, '', start, end, '', ' kth', '')
+ return self.addDeviceFunctionCall(displayname, kprobename, proc, pid, start, end, cdata, rdata)
+ # this should not happen
+ if not tgtdev:
+ vprint('[%f - %f] %s-%d %s %s %s' % \
+ (start, end, proc, pid, kprobename, cdata, rdata))
return False
- # detail block fits within tgtdev
+ # place the call data inside the src element of the tgtdev
if('src' not in tgtdev):
tgtdev['src'] = []
+ ubiquitous = False
+ if kprobename in self.dev_ubiquitous:
+ ubiquitous = True
title = cdata+' '+rdata
mstr = '\(.*\) *(?P<args>.*) *\((?P<caller>.*)\+.* arg1=(?P<ret>.*)'
m = re.match(mstr, title)
@@ -777,14 +834,56 @@ class Data:
r = ''
else:
r = 'ret=%s ' % r
- l = '%0.3fms' % ((end - start) * 1000)
- if kprobename in self.dev_ubiquitous:
- title = '%s(%s) <- %s, %s(%s)' % (displayname, a, c, r, l)
- else:
- title = '%s(%s) %s(%s)' % (displayname, a, r, l)
- e = TraceEvent(title, kprobename, start, end - start)
+ if ubiquitous and c in self.dev_ubiquitous:
+ return False
+ e = DevFunction(displayname, a, c, r, start, end, ubiquitous, proc, pid)
tgtdev['src'].append(e)
return True
+ def overflowDevices(self):
+ # get a list of devices that extend beyond the end of this test run
+ devlist = []
+ for phase in self.phases:
+ list = self.dmesg[phase]['list']
+ for devname in list:
+ dev = list[devname]
+ if dev['end'] > self.end:
+ devlist.append(dev)
+ return devlist
+ def mergeOverlapDevices(self, devlist):
+ # merge any devices that overlap devlist
+ for dev in devlist:
+ devname = dev['name']
+ for phase in self.phases:
+ list = self.dmesg[phase]['list']
+ if devname not in list:
+ continue
+ tdev = list[devname]
+ o = min(dev['end'], tdev['end']) - max(dev['start'], tdev['start'])
+ if o <= 0:
+ continue
+ dev['end'] = tdev['end']
+ if 'src' not in dev or 'src' not in tdev:
+ continue
+ dev['src'] += tdev['src']
+ del list[devname]
+ def optimizeDevSrc(self):
+ # merge any src call loops to reduce timeline size
+ for phase in self.phases:
+ list = self.dmesg[phase]['list']
+ for dev in list:
+ if 'src' not in list[dev]:
+ continue
+ src = list[dev]['src']
+ p = 0
+ for e in sorted(src, key=lambda event: event.time):
+ if not p or not e.repeat(p):
+ p = e
+ continue
+ # e is another iteration of p, move it into p
+ p.end = e.end
+ p.length = p.end - p.time
+ p.count += 1
+ src.remove(e)
def trimTimeVal(self, t, t0, dT, left):
if left:
if(t > t0):
@@ -832,36 +931,6 @@ class Data:
else:
self.trimTime(self.tSuspended, \
self.tResumed-self.tSuspended, False)
- def newPhaseWithSingleAction(self, phasename, devname, start, end, color):
- for phase in self.phases:
- self.dmesg[phase]['order'] += 1
- self.html_device_id += 1
- devid = '%s%d' % (self.idstr, self.html_device_id)
- list = dict()
- list[devname] = \
- {'start': start, 'end': end, 'pid': 0, 'par': '',
- 'length': (end-start), 'row': 0, 'id': devid, 'drv': '' };
- self.dmesg[phasename] = \
- {'list': list, 'start': start, 'end': end,
- 'row': 0, 'color': color, 'order': 0}
- self.phases = self.sortedPhases()
- def newPhase(self, phasename, start, end, color, order):
- if(order < 0):
- order = len(self.phases)
- for phase in self.phases[order:]:
- self.dmesg[phase]['order'] += 1
- if(order > 0):
- p = self.phases[order-1]
- self.dmesg[p]['end'] = start
- if(order < len(self.phases)):
- p = self.phases[order]
- self.dmesg[p]['start'] = end
- list = dict()
- self.dmesg[phasename] = \
- {'list': list, 'start': start, 'end': end,
- 'row': 0, 'color': color, 'order': order}
- self.phases = self.sortedPhases()
- self.devicegroups.append([phasename])
def setPhase(self, phase, ktime, isbegin):
if(isbegin):
self.dmesg[phase]['start'] = ktime
@@ -893,33 +962,36 @@ class Data:
break
vprint('%s (%s): callback didnt return' % (devname, phase))
def deviceFilter(self, devicefilter):
- # remove all by the relatives of the filter devnames
+ # get a list of all devices related to the filter devices
filter = []
for phase in self.phases:
list = self.dmesg[phase]['list']
for name in devicefilter:
dev = name
+ # loop up to the top level parent of this dev
while(dev in list):
if(dev not in filter):
filter.append(dev)
dev = list[dev]['par']
+ # now get the full tree of related devices
children = self.deviceDescendants(name, phase)
for dev in children:
if(dev not in filter):
filter.append(dev)
+ # remove all devices not in the filter list
for phase in self.phases:
list = self.dmesg[phase]['list']
rmlist = []
for name in list:
pid = list[name]['pid']
- if(name not in filter and pid >= 0):
+ if(name not in filter):
rmlist.append(name)
for name in rmlist:
del list[name]
def fixupInitcallsThatDidntReturn(self):
# if any calls never returned, clip them at system resume end
for phase in self.phases:
- self.fixupInitcalls(phase, self.getEnd())
+ self.fixupInitcalls(phase, self.end)
def isInsideTimeline(self, start, end):
if(self.start <= start and self.end > start):
return True
@@ -946,24 +1018,36 @@ class Data:
# if event ends after timeline end, expand the timeline
if(end > self.end):
self.setEnd(end)
- # which phase is this device callback or action "in"
- targetphase = "none"
+ # which phase is this device callback or action in
+ targetphase = 'none'
htmlclass = ''
overlap = 0.0
phases = []
for phase in self.phases:
pstart = self.dmesg[phase]['start']
pend = self.dmesg[phase]['end']
+ # see if the action overlaps this phase
o = max(0, min(end, pend) - max(start, pstart))
if o > 0:
phases.append(phase)
+ # set the target phase to the one that overlaps most
if o > overlap:
if overlap > 0 and phase == 'post_resume':
continue
targetphase = phase
overlap = o
+ # if no target phase was found, check for pre/post resume
+ if targetphase == 'none':
+ o = max(0, min(end, self.tKernSus) - max(start, self.start))
+ if o > 0:
+ targetphase = self.phases[0]
+ o = max(0, min(end, self.end) - max(start, self.tKernRes))
+ if o > 0:
+ targetphase = self.phases[-1]
if pid == -2:
htmlclass = ' bg'
+ elif pid == -3:
+ htmlclass = ' ps'
if len(phases) > 1:
htmlclass = ' bg'
self.phaseOverlap(phases)
@@ -985,8 +1069,8 @@ class Data:
while(name in list):
name = '%s[%d]' % (origname, i)
i += 1
- list[name] = {'start': start, 'end': end, 'pid': pid, 'par': parent,
- 'length': length, 'row': 0, 'id': devid, 'drv': drv }
+ list[name] = {'name': name, 'start': start, 'end': end, 'pid': pid,
+ 'par': parent, 'length': length, 'row': 0, 'id': devid, 'drv': drv }
if htmlclass:
list[name]['htmlclass'] = htmlclass
if color:
@@ -1025,11 +1109,14 @@ class Data:
devlist = self.deviceChildren(devname, phase)
return self.deviceIDs(devlist, phase)
def printDetails(self):
+ vprint('Timeline Details:')
vprint(' test start: %f' % self.start)
+ vprint('kernel suspend start: %f' % self.tKernSus)
for phase in self.phases:
dc = len(self.dmesg[phase]['list'])
vprint(' %16s: %f - %f (%d devices)' % (phase, \
self.dmesg[phase]['start'], self.dmesg[phase]['end'], dc))
+ vprint(' kernel resume end: %f' % self.tKernRes)
vprint(' test end: %f' % self.end)
def deviceChildrenAllPhases(self, devname):
devlist = []
@@ -1108,21 +1195,121 @@ class Data:
if width != '0.000000' and length >= mindevlen:
devlist.append(dev)
self.tdevlist[phase] = devlist
-
-# Class: TraceEvent
+ def addProcessUsageEvent(self, name, times):
+ # get the start and end times for this process
+ maxC = 0
+ tlast = 0
+ start = -1
+ end = -1
+ for t in sorted(times):
+ if tlast == 0:
+ tlast = t
+ continue
+ if name in self.pstl[t]:
+ if start == -1 or tlast < start:
+ start = tlast
+ if end == -1 or t > end:
+ end = t
+ tlast = t
+ if start == -1 or end == -1:
+ return 0
+ # add a new action for this process and get the object
+ out = self.newActionGlobal(name, start, end, -3)
+ if not out:
+ return 0
+ phase, devname = out
+ dev = self.dmesg[phase]['list'][devname]
+ # get the cpu exec data
+ tlast = 0
+ clast = 0
+ cpuexec = dict()
+ for t in sorted(times):
+ if tlast == 0 or t <= start or t > end:
+ tlast = t
+ continue
+ list = self.pstl[t]
+ c = 0
+ if name in list:
+ c = list[name]
+ if c > maxC:
+ maxC = c
+ if c != clast:
+ key = (tlast, t)
+ cpuexec[key] = c
+ tlast = t
+ clast = c
+ dev['cpuexec'] = cpuexec
+ return maxC
+ def createProcessUsageEvents(self):
+ # get an array of process names
+ proclist = []
+ for t in self.pstl:
+ pslist = self.pstl[t]
+ for ps in pslist:
+ if ps not in proclist:
+ proclist.append(ps)
+ # get a list of data points for suspend and resume
+ tsus = []
+ tres = []
+ for t in sorted(self.pstl):
+ if t < self.tSuspended:
+ tsus.append(t)
+ else:
+ tres.append(t)
+ # process the events for suspend and resume
+ if len(proclist) > 0:
+ vprint('Process Execution:')
+ for ps in proclist:
+ c = self.addProcessUsageEvent(ps, tsus)
+ if c > 0:
+ vprint('%25s (sus): %d' % (ps, c))
+ c = self.addProcessUsageEvent(ps, tres)
+ if c > 0:
+ vprint('%25s (res): %d' % (ps, c))
+
+# Class: DevFunction
# Description:
-# A container for trace event data found in the ftrace file
-class TraceEvent:
- text = ''
- time = 0.0
- length = 0.0
- title = ''
+# A container for kprobe function data we want in the dev timeline
+class DevFunction:
row = 0
- def __init__(self, a, n, t, l):
- self.title = a
- self.text = n
- self.time = t
- self.length = l
+ count = 1
+ def __init__(self, name, args, caller, ret, start, end, u, proc, pid):
+ self.name = name
+ self.args = args
+ self.caller = caller
+ self.ret = ret
+ self.time = start
+ self.length = end - start
+ self.end = end
+ self.ubiquitous = u
+ self.proc = proc
+ self.pid = pid
+ def title(self):
+ cnt = ''
+ if self.count > 1:
+ cnt = '(x%d)' % self.count
+ l = '%0.3fms' % (self.length * 1000)
+ if self.ubiquitous:
+ title = '%s(%s) <- %s, %s%s(%s)' % \
+ (self.name, self.args, self.caller, self.ret, cnt, l)
+ else:
+ title = '%s(%s) %s%s(%s)' % (self.name, self.args, self.ret, cnt, l)
+ return title
+ def text(self):
+ if self.count > 1:
+ text = '%s(x%d)' % (self.name, self.count)
+ else:
+ text = self.name
+ return text
+ def repeat(self, tgt):
+ dt = self.time - tgt.end
+ if tgt.caller == self.caller and \
+ tgt.name == self.name and tgt.args == self.args and \
+ tgt.proc == self.proc and tgt.pid == self.pid and \
+ tgt.ret == self.ret and dt >= 0 and dt <= 0.000100 and \
+ self.length < 0.001:
+ return True
+ return False
# Class: FTraceLine
# Description:
@@ -1506,6 +1693,12 @@ class FTraceCallGraph:
l.depth, l.name, l.length*1000000))
print(' ')
+class DevItem:
+ def __init__(self, test, phase, dev):
+ self.test = test
+ self.phase = phase
+ self.dev = dev
+
# Class: Timeline
# Description:
# A container for a device timeline which calculates
@@ -1517,9 +1710,7 @@ class Timeline:
rowH = 30 # device row height
bodyH = 0 # body height
rows = 0 # total timeline rows
- phases = []
- rowmaxlines = dict()
- rowcount = dict()
+ rowlines = dict()
rowheight = dict()
def __init__(self, rowheight):
self.rowH = rowheight
@@ -1537,21 +1728,19 @@ class Timeline:
# The total number of rows needed to display this phase of the timeline
def getDeviceRows(self, rawlist):
# clear all rows and set them to undefined
- lendict = dict()
+ sortdict = dict()
for item in rawlist:
item.row = -1
- lendict[item] = item.length
- list = []
- for i in sorted(lendict, key=lendict.get, reverse=True):
- list.append(i)
- remaining = len(list)
+ sortdict[item] = item.length
+ sortlist = sorted(sortdict, key=sortdict.get, reverse=True)
+ remaining = len(sortlist)
rowdata = dict()
row = 1
# try to pack each row with as many ranges as possible
while(remaining > 0):
if(row not in rowdata):
rowdata[row] = []
- for i in list:
+ for i in sortlist:
if(i.row >= 0):
continue
s = i.time
@@ -1575,81 +1764,81 @@ class Timeline:
# Organize the timeline entries into the smallest
# number of rows possible, with no entry overlapping
# Arguments:
- # list: the list of devices/actions for a single phase
- # devlist: string list of device names to use
+ # devlist: the list of devices/actions in a group of contiguous phases
# Output:
# The total number of rows needed to display this phase of the timeline
- def getPhaseRows(self, dmesg, devlist):
+ def getPhaseRows(self, devlist):
# clear all rows and set them to undefined
remaining = len(devlist)
rowdata = dict()
row = 0
- lendict = dict()
+ sortdict = dict()
myphases = []
+ # initialize all device rows to -1 and calculate devrows
for item in devlist:
- if item[0] not in self.phases:
- self.phases.append(item[0])
- if item[0] not in myphases:
- myphases.append(item[0])
- self.rowmaxlines[item[0]] = dict()
- self.rowheight[item[0]] = dict()
- dev = dmesg[item[0]]['list'][item[1]]
+ dev = item.dev
+ tp = (item.test, item.phase)
+ if tp not in myphases:
+ myphases.append(tp)
dev['row'] = -1
- lendict[item] = float(dev['end']) - float(dev['start'])
+ # sort by length 1st, then name 2nd
+ sortdict[item] = (float(dev['end']) - float(dev['start']), item.dev['name'])
if 'src' in dev:
dev['devrows'] = self.getDeviceRows(dev['src'])
- lenlist = []
- for i in sorted(lendict, key=lendict.get, reverse=True):
- lenlist.append(i)
+ # sort the devlist by length so that large items graph on top
+ sortlist = sorted(sortdict, key=sortdict.get, reverse=True)
orderedlist = []
- for item in lenlist:
- dev = dmesg[item[0]]['list'][item[1]]
- if dev['pid'] == -2:
+ for item in sortlist:
+ if item.dev['pid'] == -2:
orderedlist.append(item)
- for item in lenlist:
+ for item in sortlist:
if item not in orderedlist:
orderedlist.append(item)
- # try to pack each row with as many ranges as possible
+ # try to pack each row with as many devices as possible
while(remaining > 0):
rowheight = 1
if(row not in rowdata):
rowdata[row] = []
for item in orderedlist:
- dev = dmesg[item[0]]['list'][item[1]]
+ dev = item.dev
if(dev['row'] < 0):
s = dev['start']
e = dev['end']
valid = True
for ritem in rowdata[row]:
- rs = ritem['start']
- re = ritem['end']
+ rs = ritem.dev['start']
+ re = ritem.dev['end']
if(not (((s <= rs) and (e <= rs)) or
((s >= re) and (e >= re)))):
valid = False
break
if(valid):
- rowdata[row].append(dev)
+ rowdata[row].append(item)
dev['row'] = row
remaining -= 1
if 'devrows' in dev and dev['devrows'] > rowheight:
rowheight = dev['devrows']
- for phase in myphases:
- self.rowmaxlines[phase][row] = rowheight
- self.rowheight[phase][row] = rowheight * self.rowH
+ for t, p in myphases:
+ if t not in self.rowlines or t not in self.rowheight:
+ self.rowlines[t] = dict()
+ self.rowheight[t] = dict()
+ if p not in self.rowlines[t] or p not in self.rowheight[t]:
+ self.rowlines[t][p] = dict()
+ self.rowheight[t][p] = dict()
+ self.rowlines[t][p][row] = rowheight
+ self.rowheight[t][p][row] = rowheight * self.rowH
row += 1
if(row > self.rows):
self.rows = int(row)
- for phase in myphases:
- self.rowcount[phase] = row
return row
- def phaseRowHeight(self, phase, row):
- return self.rowheight[phase][row]
- def phaseRowTop(self, phase, row):
+ def phaseRowHeight(self, test, phase, row):
+ return self.rowheight[test][phase][row]
+ def phaseRowTop(self, test, phase, row):
top = 0
- for i in sorted(self.rowheight[phase]):
+ for i in sorted(self.rowheight[test][phase]):
if i >= row:
break
- top += self.rowheight[phase][i]
+ top += self.rowheight[test][phase][i]
return top
# Function: calcTotalRows
# Description:
@@ -1657,19 +1846,21 @@ class Timeline:
def calcTotalRows(self):
maxrows = 0
standardphases = []
- for phase in self.phases:
- total = 0
- for i in sorted(self.rowmaxlines[phase]):
- total += self.rowmaxlines[phase][i]
- if total > maxrows:
- maxrows = total
- if total == self.rowcount[phase]:
- standardphases.append(phase)
+ for t in self.rowlines:
+ for p in self.rowlines[t]:
+ total = 0
+ for i in sorted(self.rowlines[t][p]):
+ total += self.rowlines[t][p][i]
+ if total > maxrows:
+ maxrows = total
+ if total == len(self.rowlines[t][p]):
+ standardphases.append((t, p))
self.height = self.scaleH + (maxrows*self.rowH)
self.bodyH = self.height - self.scaleH
- for phase in standardphases:
- for i in sorted(self.rowheight[phase]):
- self.rowheight[phase][i] = self.bodyH/self.rowcount[phase]
+ # if there is 1 line per row, draw them the standard way
+ for t, p in standardphases:
+ for i in sorted(self.rowheight[t][p]):
+ self.rowheight[t][p][i] = self.bodyH/len(self.rowlines[t][p])
# Function: createTimeScale
# Description:
# Create the timescale for a timeline block
@@ -1756,6 +1947,52 @@ class TestRun:
self.ftemp = dict()
self.ttemp = dict()
+class ProcessMonitor:
+ proclist = dict()
+ running = False
+ def procstat(self):
+ c = ['cat /proc/[1-9]*/stat 2>/dev/null']
+ process = subprocess.Popen(c, shell=True, stdout=subprocess.PIPE)
+ running = dict()
+ for line in process.stdout:
+ data = line.split()
+ pid = data[0]
+ name = re.sub('[()]', '', data[1])
+ user = int(data[13])
+ kern = int(data[14])
+ kjiff = ujiff = 0
+ if pid not in self.proclist:
+ self.proclist[pid] = {'name' : name, 'user' : user, 'kern' : kern}
+ else:
+ val = self.proclist[pid]
+ ujiff = user - val['user']
+ kjiff = kern - val['kern']
+ val['user'] = user
+ val['kern'] = kern
+ if ujiff > 0 or kjiff > 0:
+ running[pid] = ujiff + kjiff
+ result = process.wait()
+ out = ''
+ for pid in running:
+ jiffies = running[pid]
+ val = self.proclist[pid]
+ if out:
+ out += ','
+ out += '%s-%s %d' % (val['name'], pid, jiffies)
+ return 'ps - '+out
+ def processMonitor(self, tid):
+ global sysvals
+ while self.running:
+ out = self.procstat()
+ if out:
+ sysvals.fsetVal(out, 'trace_marker')
+ def start(self):
+ self.thread = Thread(target=self.processMonitor, args=(0,))
+ self.running = True
+ self.thread.start()
+ def stop(self):
+ self.running = False
+
# ----------------- FUNCTIONS --------------------
# Function: vprint
@@ -1788,6 +2025,13 @@ def parseStamp(line, data):
data.stamp['kernel'] = m.group('kernel')
sysvals.hostname = data.stamp['host']
sysvals.suspendmode = data.stamp['mode']
+ if sysvals.suspendmode == 'command' and sysvals.ftracefile != '':
+ modes = ['on', 'freeze', 'standby', 'mem']
+ out = os.popen('grep suspend_enter '+sysvals.ftracefile).read()
+ m = re.match('.* suspend_enter\[(?P<mode>.*)\]', out)
+ if m and m.group('mode') in ['1', '2', '3']:
+ sysvals.suspendmode = modes[int(m.group('mode'))]
+ data.stamp['mode'] = sysvals.suspendmode
if not sysvals.stamp:
sysvals.stamp = data.stamp
@@ -2071,7 +2315,7 @@ def parseTraceLog():
doError('%s does not exist' % sysvals.ftracefile, False)
sysvals.setupAllKprobes()
- tracewatch = ['suspend_enter']
+ tracewatch = []
if sysvals.usekprobes:
tracewatch += ['sync_filesystems', 'freeze_processes', 'syscore_suspend',
'syscore_resume', 'resume_console', 'thaw_processes', 'CPU_ON', 'CPU_OFF']
@@ -2102,17 +2346,13 @@ def parseTraceLog():
if(m):
tp.setTracerType(m.group('t'))
continue
- # post resume time line: did this test run include post-resume data
- m = re.match(sysvals.postresumefmt, line)
- if(m):
- t = int(m.group('t'))
- if(t > 0):
- sysvals.postresumetime = t
- continue
# device properties line
if(re.match(sysvals.devpropfmt, line)):
devProps(line)
continue
+ # ignore all other commented lines
+ if line[0] == '#':
+ continue
# ftrace line: parse only valid lines
m = re.match(tp.ftrace_line_fmt, line)
if(not m):
@@ -2142,20 +2382,35 @@ def parseTraceLog():
testrun = TestRun(data)
testruns.append(testrun)
parseStamp(tp.stamp, data)
- if len(tp.fwdata) > data.testnumber:
+ if sysvals.suspendmode == 'mem' and len(tp.fwdata) > data.testnumber:
data.fwSuspend, data.fwResume = tp.fwdata[data.testnumber]
if(data.fwSuspend > 0 or data.fwResume > 0):
data.fwValid = True
data.setStart(t.time)
+ data.tKernSus = t.time
continue
if(not data):
continue
+ # process cpu exec line
+ if t.type == 'tracing_mark_write':
+ m = re.match(sysvals.procexecfmt, t.name)
+ if(m):
+ proclist = dict()
+ for ps in m.group('ps').split(','):
+ val = ps.split()
+ if not val:
+ continue
+ name = val[0].replace('--', '-')
+ proclist[name] = int(val[1])
+ data.pstl[t.time] = proclist
+ continue
# find the end of resume
if(t.endMarker()):
- if(sysvals.usetracemarkers and sysvals.postresumetime > 0):
- phase = 'post_resume'
- data.newPhase(phase, t.time, t.time, '#F0F0F0', -1)
data.setEnd(t.time)
+ if data.tKernRes == 0.0:
+ data.tKernRes = t.time
+ if data.dmesg['resume_complete']['end'] < 0:
+ data.dmesg['resume_complete']['end'] = t.time
if(not sysvals.usetracemarkers):
# no trace markers? then quit and be sure to finish recording
# the event we used to trigger resume end
@@ -2190,8 +2445,14 @@ def parseTraceLog():
if(name.split('[')[0] in tracewatch):
continue
# -- phase changes --
+ # start of kernel suspend
+ if(re.match('suspend_enter\[.*', t.name)):
+ if(isbegin):
+ data.dmesg[phase]['start'] = t.time
+ data.tKernSus = t.time
+ continue
# suspend_prepare start
- if(re.match('dpm_prepare\[.*', t.name)):
+ elif(re.match('dpm_prepare\[.*', t.name)):
phase = 'suspend_prepare'
if(not isbegin):
data.dmesg[phase]['end'] = t.time
@@ -2291,6 +2552,8 @@ def parseTraceLog():
p = m.group('p')
if(n and p):
data.newAction(phase, n, pid, p, t.time, -1, drv)
+ if pid not in data.devpids:
+ data.devpids.append(pid)
# device callback finish
elif(t.type == 'device_pm_callback_end'):
m = re.match('(?P<drv>.*) (?P<d>.*), err.*', t.name);
@@ -2332,6 +2595,12 @@ def parseTraceLog():
else:
e['end'] = t.time
e['rdata'] = kprobedata
+ # end of kernel resume
+ if(kprobename == 'pm_notifier_call_chain' or \
+ kprobename == 'pm_restore_console'):
+ data.dmesg[phase]['end'] = t.time
+ data.tKernRes = t.time
+
# callgraph processing
elif sysvals.usecallgraph:
# create a callgraph object for the data
@@ -2359,7 +2628,14 @@ def parseTraceLog():
test.data.tLow = 0
test.data.fwValid = False
+ # dev source and procmon events can be unreadable with mixed phase height
+ if sysvals.usedevsrc or sysvals.useprocmon:
+ sysvals.mixedphaseheight = False
+
for test in testruns:
+ # add the process usage data to the timeline
+ if sysvals.useprocmon:
+ test.data.createProcessUsageEvents()
# add the traceevent data to the device hierarchy
if(sysvals.usetraceevents):
# add actual trace funcs
@@ -2387,11 +2663,11 @@ def parseTraceLog():
continue
color = sysvals.kprobeColor(e['name'])
if name not in sysvals.dev_tracefuncs:
- # config base kprobe
+ # custom user kprobe from the config
test.data.newActionGlobal(e['name'], kb, ke, -2, color)
elif sysvals.usedevsrc:
# dev kprobe
- data.addDeviceFunctionCall(e['name'], name, e['proc'], pid, kb,
+ test.data.addDeviceFunctionCall(e['name'], name, e['proc'], pid, kb,
ke, e['cdata'], e['rdata'])
if sysvals.usecallgraph:
# add the callgraph data to the device hierarchy
@@ -2443,9 +2719,19 @@ def parseTraceLog():
if(len(sysvals.devicefilter) > 0):
data.deviceFilter(sysvals.devicefilter)
data.fixupInitcallsThatDidntReturn()
- if(sysvals.verbose):
+ if sysvals.usedevsrc:
+ data.optimizeDevSrc()
+ if sysvals.verbose:
data.printDetails()
+ # merge any overlapping devices between test runs
+ if sysvals.usedevsrc and len(testdata) > 1:
+ tc = len(testdata)
+ for i in range(tc - 1):
+ devlist = testdata[i].overflowDevices()
+ for j in range(i + 1, tc):
+ testdata[j].mergeOverlapDevices(devlist)
+
return testdata
# Function: loadRawKernelLog
@@ -3009,14 +3295,15 @@ def createHTML(testruns):
headline_version = '<div class="version"><a href="https://01.org/suspendresume">AnalyzeSuspend v%s</a></div>' % sysvals.version
headline_stamp = '<div class="stamp">{0} {1} {2} {3}</div>\n'
html_devlist1 = '<button id="devlist1" class="devlist" style="float:left;">Device Detail%s</button>' % x2changes[0]
- html_zoombox = '<center><button id="zoomin">ZOOM IN</button><button id="zoomout">ZOOM OUT</button><button id="zoomdef">ZOOM 1:1</button></center>\n'
+ html_zoombox = '<center><button id="zoomin">ZOOM IN +</button><button id="zoomout">ZOOM OUT -</button><button id="zoomdef">ZOOM 1:1</button></center>\n'
html_devlist2 = '<button id="devlist2" class="devlist" style="float:right;">Device Detail2</button>\n'
html_timeline = '<div id="dmesgzoombox" class="zoombox">\n<div id="{0}" class="timeline" style="height:{1}px">\n'
- html_tblock = '<div id="block{0}" class="tblock" style="left:{1}%;width:{2}%;">\n'
+ html_tblock = '<div id="block{0}" class="tblock" style="left:{1}%;width:{2}%;"><div class="tback" style="height:{3}px"></div>\n'
html_device = '<div id="{0}" title="{1}" class="thread{7}" style="left:{2}%;top:{3}px;height:{4}px;width:{5}%;{8}">{6}</div>\n'
- html_traceevent = '<div title="{0}" class="traceevent" style="left:{1}%;top:{2}px;height:{3}px;width:{4}%;line-height:{3}px;">{5}</div>\n'
+ html_traceevent = '<div title="{0}" class="traceevent{6}" style="left:{1}%;top:{2}px;height:{3}px;width:{4}%;line-height:{3}px;">{5}</div>\n'
+ html_cpuexec = '<div class="jiffie" style="left:{0}%;top:{1}px;height:{2}px;width:{3}%;background:{4};"></div>\n'
html_phase = '<div class="phase" style="left:{0}%;width:{1}%;top:{2}px;height:{3}px;background-color:{4}">{5}</div>\n'
- html_phaselet = '<div id="{0}" class="phaselet" style="left:{1}%;width:{2}%;background-color:{3}"></div>\n'
+ html_phaselet = '<div id="{0}" class="phaselet" style="left:{1}%;width:{2}%;background:{3}"></div>\n'
html_legend = '<div id="p{3}" class="square" style="left:{0}%;background-color:{1}"> {2}</div>\n'
html_timetotal = '<table class="time1">\n<tr>'\
'<td class="green">{2} Suspend Time: <b>{0} ms</b></td>'\
@@ -3039,23 +3326,18 @@ def createHTML(testruns):
'</tr>\n</table>\n'
# html format variables
- rowheight = 30
- devtextS = '14px'
- devtextH = '30px'
- hoverZ = 'z-index:10;'
-
+ hoverZ = 'z-index:8;'
if sysvals.usedevsrc:
hoverZ = ''
# device timeline
vprint('Creating Device Timeline...')
- devtl = Timeline(rowheight)
+ devtl = Timeline(30)
# Generate the header for this timeline
for data in testruns:
tTotal = data.end - data.start
- tEnd = data.dmesg['resume_complete']['end']
if(tTotal == 0):
print('ERROR: No timeline data')
sys.exit()
@@ -3074,7 +3356,7 @@ def createHTML(testruns):
elif data.fwValid:
suspend_time = '%.0f'%((data.tSuspended-data.start)*1000 + \
(data.fwSuspend/1000000.0))
- resume_time = '%.0f'%((tEnd-data.tSuspended)*1000 + \
+ resume_time = '%.0f'%((data.end-data.tSuspended)*1000 + \
(data.fwResume/1000000.0))
testdesc1 = 'Total'
testdesc2 = ''
@@ -3089,7 +3371,7 @@ def createHTML(testruns):
resume_time, testdesc1)
devtl.html['header'] += thtml
sktime = '%.3f'%((data.dmesg['suspend_machine']['end'] - \
- data.getStart())*1000)
+ data.tKernSus)*1000)
sftime = '%.3f'%(data.fwSuspend / 1000000.0)
rftime = '%.3f'%(data.fwResume / 1000000.0)
rktime = '%.3f'%((data.dmesg['resume_complete']['end'] - \
@@ -3098,7 +3380,7 @@ def createHTML(testruns):
sftime, rftime, rktime, testdesc2)
else:
suspend_time = '%.0f'%((data.tSuspended-data.start)*1000)
- resume_time = '%.0f'%((tEnd-data.tSuspended)*1000)
+ resume_time = '%.0f'%((data.end-data.tSuspended)*1000)
testdesc = 'Kernel'
if(len(testruns) > 1):
testdesc = ordinal(data.testnumber+1)+' '+testdesc
@@ -3117,14 +3399,20 @@ def createHTML(testruns):
tTotal = tMax - t0
# determine the maximum number of rows we need to draw
+ fulllist = []
for data in testruns:
data.selectTimelineDevices('%f', tTotal, sysvals.mindevlen)
for group in data.devicegroups:
devlist = []
for phase in group:
for devname in data.tdevlist[phase]:
- devlist.append((phase,devname))
- devtl.getPhaseRows(data.dmesg, devlist)
+ d = DevItem(data.testnumber, phase, data.dmesg[phase]['list'][devname])
+ devlist.append(d)
+ fulllist.append(d)
+ if sysvals.mixedphaseheight:
+ devtl.getPhaseRows(devlist)
+ if not sysvals.mixedphaseheight:
+ devtl.getPhaseRows(fulllist)
devtl.calcTotalRows()
# create bounding box, add buttons
@@ -3145,18 +3433,6 @@ def createHTML(testruns):
# draw each test run chronologically
for data in testruns:
- # if nore than one test, draw a block to represent user mode
- if(data.testnumber > 0):
- m0 = testruns[data.testnumber-1].end
- mMax = testruns[data.testnumber].start
- mTotal = mMax - m0
- name = 'usermode%d' % data.testnumber
- top = '%d' % devtl.scaleH
- left = '%f' % (((m0-t0)*100.0)/tTotal)
- width = '%f' % ((mTotal*100.0)/tTotal)
- title = 'user mode (%0.3f ms) ' % (mTotal*1000)
- devtl.html['timeline'] += html_device.format(name, \
- title, left, top, '%d'%devtl.bodyH, width, '', '', '')
# now draw the actual timeline blocks
for dir in phases:
# draw suspend and resume blocks separately
@@ -3169,13 +3445,16 @@ def createHTML(testruns):
else:
m0 = testruns[data.testnumber].tSuspended
mMax = testruns[data.testnumber].end
+ # in an x2 run, remove any gap between blocks
+ if len(testruns) > 1 and data.testnumber == 0:
+ mMax = testruns[1].start
mTotal = mMax - m0
left = '%f' % ((((m0-t0)*100.0)+sysvals.srgap/2)/tTotal)
# if a timeline block is 0 length, skip altogether
if mTotal == 0:
continue
width = '%f' % (((mTotal*100.0)-sysvals.srgap/2)/tTotal)
- devtl.html['timeline'] += html_tblock.format(bname, left, width)
+ devtl.html['timeline'] += html_tblock.format(bname, left, width, devtl.scaleH)
for b in sorted(phases[dir]):
# draw the phase color background
phase = data.dmesg[b]
@@ -3185,6 +3464,7 @@ def createHTML(testruns):
devtl.html['timeline'] += html_phase.format(left, width, \
'%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \
data.dmesg[b]['color'], '')
+ for b in sorted(phases[dir]):
# draw the devices for this phase
phaselist = data.dmesg[b]['list']
for d in data.tdevlist[b]:
@@ -3196,46 +3476,62 @@ def createHTML(testruns):
xtrastyle = ''
if 'htmlclass' in dev:
xtraclass = dev['htmlclass']
- xtrainfo = dev['htmlclass']
if 'color' in dev:
xtrastyle = 'background-color:%s;' % dev['color']
if(d in sysvals.devprops):
name = sysvals.devprops[d].altName(d)
xtraclass = sysvals.devprops[d].xtraClass()
xtrainfo = sysvals.devprops[d].xtraInfo()
+ elif xtraclass == ' kth':
+ xtrainfo = ' kernel_thread'
if('drv' in dev and dev['drv']):
drv = ' {%s}' % dev['drv']
- rowheight = devtl.phaseRowHeight(b, dev['row'])
- rowtop = devtl.phaseRowTop(b, dev['row'])
+ rowheight = devtl.phaseRowHeight(data.testnumber, b, dev['row'])
+ rowtop = devtl.phaseRowTop(data.testnumber, b, dev['row'])
top = '%.3f' % (rowtop + devtl.scaleH)
left = '%f' % (((dev['start']-m0)*100)/mTotal)
width = '%f' % (((dev['end']-dev['start'])*100)/mTotal)
length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000)
+ title = name+drv+xtrainfo+length
if sysvals.suspendmode == 'command':
- title = name+drv+xtrainfo+length+'cmdexec'
+ title += 'cmdexec'
+ elif xtraclass == ' ps':
+ if 'suspend' in b:
+ title += 'pre_suspend_process'
+ else:
+ title += 'post_resume_process'
else:
- title = name+drv+xtrainfo+length+b
+ title += b
devtl.html['timeline'] += html_device.format(dev['id'], \
title, left, top, '%.3f'%rowheight, width, \
d+drv, xtraclass, xtrastyle)
+ if('cpuexec' in dev):
+ for t in sorted(dev['cpuexec']):
+ start, end = t
+ j = float(dev['cpuexec'][t]) / 5
+ if j > 1.0:
+ j = 1.0
+ height = '%.3f' % (rowheight/3)
+ top = '%.3f' % (rowtop + devtl.scaleH + 2*rowheight/3)
+ left = '%f' % (((start-m0)*100)/mTotal)
+ width = '%f' % ((end-start)*100/mTotal)
+ color = 'rgba(255, 0, 0, %f)' % j
+ devtl.html['timeline'] += \
+ html_cpuexec.format(left, top, height, width, color)
if('src' not in dev):
continue
# draw any trace events for this device
- vprint('Debug trace events found for device %s' % d)
- vprint('%20s %20s %10s %8s' % ('title', \
- 'name', 'time(ms)', 'length(ms)'))
for e in dev['src']:
- vprint('%20s %20s %10.3f %8.3f' % (e.title, \
- e.text, e.time*1000, e.length*1000))
- height = devtl.rowH
+ height = '%.3f' % devtl.rowH
top = '%.3f' % (rowtop + devtl.scaleH + (e.row*devtl.rowH))
left = '%f' % (((e.time-m0)*100)/mTotal)
width = '%f' % (e.length*100/mTotal)
- color = 'rgba(204,204,204,0.5)'
+ sleepclass = ''
+ if e.ubiquitous:
+ sleepclass = ' sleep'
devtl.html['timeline'] += \
- html_traceevent.format(e.title, \
- left, top, '%.3f'%height, \
- width, e.text)
+ html_traceevent.format(e.title(), \
+ left, top, height, width, e.text(), sleepclass)
# draw the time scale, try to make the number of labels readable
devtl.html['timeline'] += devtl.createTimeScale(m0, mMax, tTotal, dir)
devtl.html['timeline'] += '</div>\n'
@@ -3302,20 +3598,23 @@ def createHTML(testruns):
.pf:'+cgchk+' + label {background:url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/><rect x="8" y="4" width="2" height="10" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
.pf:'+cgnchk+' ~ label {background:url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
.pf:'+cgchk+' ~ *:not(:nth-child(2)) {display:none;}\n\
- .zoombox {position:relative;width:100%;overflow-x:scroll;}\n\
+ .zoombox {position:relative;width:100%;overflow-x:scroll;-webkit-user-select:none;-moz-user-select:none;user-select:none;}\n\
.timeline {position:relative;font-size:14px;cursor:pointer;width:100%; overflow:hidden;background:linear-gradient(#cccccc, white);}\n\
- .thread {position:absolute;height:0%;overflow:hidden;line-height:'+devtextH+';font-size:'+devtextS+';border:1px solid;text-align:center;white-space:nowrap;background-color:rgba(204,204,204,0.5);}\n\
+ .thread {position:absolute;height:0%;overflow:hidden;z-index:7;line-height:30px;font-size:14px;border:1px solid;text-align:center;white-space:nowrap;}\n\
.thread.sync {background-color:'+sysvals.synccolor+';}\n\
.thread.bg {background-color:'+sysvals.kprobecolor+';}\n\
+ .thread.ps {border-radius:3px;background:linear-gradient(to top, #ccc, #eee);}\n\
.thread:hover {background-color:white;border:1px solid red;'+hoverZ+'}\n\
.hover {background-color:white;border:1px solid red;'+hoverZ+'}\n\
.hover.sync {background-color:white;}\n\
- .hover.bg {background-color:white;}\n\
- .traceevent {position:absolute;font-size:10px;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,rgba(204,204,204,1),rgba(150,150,150,1));}\n\
+ .hover.bg,.hover.kth,.hover.sync,.hover.ps {background-color:white;}\n\
+ .jiffie {position:absolute;pointer-events: none;z-index:8;}\n\
+ .traceevent {position:absolute;font-size:10px;z-index:7;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,rgb(204,204,204),rgb(150,150,150));}\n\
+ .traceevent.sleep {font-style:normal;}\n\
.traceevent:hover {background:white;}\n\
.phase {position:absolute;overflow:hidden;border:0px;text-align:center;}\n\
.phaselet {position:absolute;overflow:hidden;border:0px;text-align:center;height:100px;font-size:24px;}\n\
- .t {z-index:2;position:absolute;pointer-events:none;top:0%;height:100%;border-right:1px solid black;}\n\
+ .t {position:absolute;pointer-events:none;top:0%;height:100%;border-right:1px solid black;z-index:6;}\n\
.legend {position:relative; width:100%; height:40px; text-align:center;margin-bottom:20px}\n\
.legend .square {position:absolute;cursor:pointer;top:10px; width:0px;height:20px;border:1px solid;padding-left:20px;}\n\
button {height:40px;width:200px;margin-bottom:20px;margin-top:20px;font-size:24px;}\n\
@@ -3327,7 +3626,8 @@ def createHTML(testruns):
a:active {color:white;}\n\
.version {position:relative;float:left;color:white;font-size:10px;line-height:30px;margin-left:10px;}\n\
#devicedetail {height:100px;box-shadow:5px 5px 20px black;}\n\
- .tblock {position:absolute;height:100%;}\n\
+ .tblock {position:absolute;height:100%;background-color:#ddd;}\n\
+ .tback {position:absolute;width:100%;background:linear-gradient(#ccc, #ddd);}\n\
.bg {z-index:1;}\n\
</style>\n</head>\n<body>\n'
@@ -3359,6 +3659,9 @@ def createHTML(testruns):
# draw the colored boxes for the device detail section
for data in testruns:
hf.write('<div id="devicedetail%d">\n' % data.testnumber)
+ pscolor = 'linear-gradient(to top left, #ccc, #eee)'
+ hf.write(html_phaselet.format('pre_suspend_process', \
+ '0', '0', pscolor))
for b in data.phases:
phase = data.dmesg[b]
length = phase['end']-phase['start']
@@ -3366,9 +3669,10 @@ def createHTML(testruns):
width = '%.3f' % ((length*100.0)/tTotal)
hf.write(html_phaselet.format(b, left, width, \
data.dmesg[b]['color']))
+ hf.write(html_phaselet.format('post_resume_process', \
+ '0', '0', pscolor))
if sysvals.suspendmode == 'command':
- hf.write(html_phaselet.format('cmdexec', '0', '0', \
- data.dmesg['resume_complete']['color']))
+ hf.write(html_phaselet.format('cmdexec', '0', '0', pscolor))
hf.write('</div>\n')
hf.write('</div>\n')
@@ -3475,6 +3779,7 @@ def addScriptCode(hf, testruns):
script_code = \
'<script type="text/javascript">\n'+detail+\
' var resolution = -1;\n'\
+ ' var dragval = [0, 0];\n'\
' function redrawTimescale(t0, tMax, tS) {\n'\
' var rline = \'<div class="t" style="left:0;border-left:1px solid black;border-right:0;"><cR><-R</cR></div>\';\n'\
' var tTotal = tMax - t0;\n'\
@@ -3542,8 +3847,12 @@ def addScriptCode(hf, testruns):
' resolution = tS[i];\n'\
' redrawTimescale(t0, tMax, tS[i]);\n'\
' }\n'\
+ ' function deviceName(title) {\n'\
+ ' var name = title.slice(0, title.indexOf(" ("));\n'\
+ ' return name;\n'\
+ ' }\n'\
' function deviceHover() {\n'\
- ' var name = this.title.slice(0, this.title.indexOf(" ("));\n'\
+ ' var name = deviceName(this.title);\n'\
' var dmesg = document.getElementById("dmesg");\n'\
' var dev = dmesg.getElementsByClassName("thread");\n'\
' var cpu = -1;\n'\
@@ -3552,7 +3861,7 @@ def addScriptCode(hf, testruns):
' else if(name.match("CPU_OFF\[[0-9]*\]"))\n'\
' cpu = parseInt(name.slice(8));\n'\
' for (var i = 0; i < dev.length; i++) {\n'\
- ' dname = dev[i].title.slice(0, dev[i].title.indexOf(" ("));\n'\
+ ' dname = deviceName(dev[i].title);\n'\
' var cname = dev[i].className.slice(dev[i].className.indexOf("thread"));\n'\
' if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\
' (name == dname))\n'\
@@ -3578,7 +3887,7 @@ def addScriptCode(hf, testruns):
' total[2] = (total[2]+total[4])/2;\n'\
' }\n'\
' var devtitle = document.getElementById("devicedetailtitle");\n'\
- ' var name = title.slice(0, title.indexOf(" ("));\n'\
+ ' var name = deviceName(title);\n'\
' if(cpu >= 0) name = "CPU"+cpu;\n'\
' var driver = "";\n'\
' var tS = "<t2>(</t2>";\n'\
@@ -3600,7 +3909,7 @@ def addScriptCode(hf, testruns):
' function deviceDetail() {\n'\
' var devinfo = document.getElementById("devicedetail");\n'\
' devinfo.style.display = "block";\n'\
- ' var name = this.title.slice(0, this.title.indexOf(" ("));\n'\
+ ' var name = deviceName(this.title);\n'\
' var cpu = -1;\n'\
' if(name.match("CPU_ON\[[0-9]*\]"))\n'\
' cpu = parseInt(name.slice(7));\n'\
@@ -3615,7 +3924,7 @@ def addScriptCode(hf, testruns):
' var pd = pdata[0];\n'\
' var total = [0.0, 0.0, 0.0];\n'\
' for (var i = 0; i < dev.length; i++) {\n'\
- ' dname = dev[i].title.slice(0, dev[i].title.indexOf(" ("));\n'\
+ ' dname = deviceName(dev[i].title);\n'\
' if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\
' (name == dname))\n'\
' {\n'\
@@ -3656,7 +3965,7 @@ def addScriptCode(hf, testruns):
' phases[i].title = phases[i].id+" "+pd[phases[i].id]+" ms";\n'\
' left += w;\n'\
' var time = "<t4 style=\\"font-size:"+fs+"px\\">"+pd[phases[i].id]+" ms<br></t4>";\n'\
- ' var pname = "<t3 style=\\"font-size:"+fs2+"px\\">"+phases[i].id.replace("_", " ")+"</t3>";\n'\
+ ' var pname = "<t3 style=\\"font-size:"+fs2+"px\\">"+phases[i].id.replace(new RegExp("_", "g"), " ")+"</t3>";\n'\
' phases[i].innerHTML = time+pname;\n'\
' } else {\n'\
' phases[i].style.width = "0%";\n'\
@@ -3702,10 +4011,37 @@ def addScriptCode(hf, testruns):
' }\n'\
' function onClickPhase(e) {\n'\
' }\n'\
+ ' function onMouseDown(e) {\n'\
+ ' dragval[0] = e.clientX;\n'\
+ ' dragval[1] = document.getElementById("dmesgzoombox").scrollLeft;\n'\
+ ' document.onmousemove = onMouseMove;\n'\
+ ' }\n'\
+ ' function onMouseMove(e) {\n'\
+ ' var zoombox = document.getElementById("dmesgzoombox");\n'\
+ ' zoombox.scrollLeft = dragval[1] + dragval[0] - e.clientX;\n'\
+ ' }\n'\
+ ' function onMouseUp(e) {\n'\
+ ' document.onmousemove = null;\n'\
+ ' }\n'\
+ ' function onKeyPress(e) {\n'\
+ ' var c = e.charCode;\n'\
+ ' if(c != 42 && c != 43 && c != 45) return;\n'\
+ ' var click = document.createEvent("Events");\n'\
+ ' click.initEvent("click", true, false);\n'\
+ ' if(c == 43) \n'\
+ ' document.getElementById("zoomin").dispatchEvent(click);\n'\
+ ' else if(c == 45)\n'\
+ ' document.getElementById("zoomout").dispatchEvent(click);\n'\
+ ' else if(c == 42)\n'\
+ ' document.getElementById("zoomdef").dispatchEvent(click);\n'\
+ ' }\n'\
' window.addEventListener("resize", function () {zoomTimeline();});\n'\
' window.addEventListener("load", function () {\n'\
' var dmesg = document.getElementById("dmesg");\n'\
' dmesg.style.width = "100%"\n'\
+ ' document.onmousedown = onMouseDown;\n'\
+ ' document.onmouseup = onMouseUp;\n'\
+ ' document.onkeypress = onKeyPress;\n'\
' document.getElementById("zoomin").onclick = zoomTimeline;\n'\
' document.getElementById("zoomout").onclick = zoomTimeline;\n'\
' document.getElementById("zoomdef").onclick = zoomTimeline;\n'\
@@ -3736,7 +4072,7 @@ def addScriptCode(hf, testruns):
def executeSuspend():
global sysvals
- t0 = time.time()*1000
+ pm = ProcessMonitor()
tp = sysvals.tpath
fwdata = []
# mark the start point in the kernel ring buffer just as we start
@@ -3745,30 +4081,35 @@ def executeSuspend():
if(sysvals.usecallgraph or sysvals.usetraceevents):
print('START TRACING')
sysvals.fsetVal('1', 'tracing_on')
+ if sysvals.useprocmon:
+ pm.start()
# execute however many s/r runs requested
for count in range(1,sysvals.execcount+1):
- # if this is test2 and there's a delay, start here
+ # x2delay in between test runs
if(count > 1 and sysvals.x2delay > 0):
- tN = time.time()*1000
- while (tN - t0) < sysvals.x2delay:
- tN = time.time()*1000
- time.sleep(0.001)
- # initiate suspend
- if(sysvals.usecallgraph or sysvals.usetraceevents):
- sysvals.fsetVal('SUSPEND START', 'trace_marker')
- if sysvals.suspendmode == 'command':
+ time.sleep(sysvals.x2delay/1000.0)
+ # start message
+ if sysvals.testcommand != '':
print('COMMAND START')
- if(sysvals.rtcwake):
- print('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime)
- sysvals.rtcWakeAlarmOn()
- os.system(sysvals.testcommand)
else:
if(sysvals.rtcwake):
print('SUSPEND START')
- print('will autoresume in %d seconds' % sysvals.rtcwaketime)
- sysvals.rtcWakeAlarmOn()
else:
print('SUSPEND START (press a key to resume)')
+ # set rtcwake
+ if(sysvals.rtcwake):
+ print('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime)
+ sysvals.rtcWakeAlarmOn()
+ # start of suspend trace marker
+ if(sysvals.usecallgraph or sysvals.usetraceevents):
+ sysvals.fsetVal('SUSPEND START', 'trace_marker')
+ # predelay delay
+ if(count == 1 and sysvals.predelay > 0):
+ time.sleep(sysvals.predelay/1000.0)
+ # initiate suspend or command
+ if sysvals.testcommand != '':
+ os.system(sysvals.testcommand+' 2>&1');
+ else:
pf = open(sysvals.powerfile, 'w')
pf.write(sysvals.suspendmode)
# execution will pause here
@@ -3776,22 +4117,21 @@ def executeSuspend():
pf.close()
except:
pass
- t0 = time.time()*1000
if(sysvals.rtcwake):
sysvals.rtcWakeAlarmOff()
+ # postdelay delay
+ if(count == sysvals.execcount and sysvals.postdelay > 0):
+ time.sleep(sysvals.postdelay/1000.0)
# return from suspend
print('RESUME COMPLETE')
if(sysvals.usecallgraph or sysvals.usetraceevents):
sysvals.fsetVal('RESUME COMPLETE', 'trace_marker')
- if(sysvals.suspendmode == 'mem'):
+ if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'):
fwdata.append(getFPDT(False))
- # look for post resume events after the last test run
- t = sysvals.postresumetime
- if(t > 0):
- print('Waiting %d seconds for POST-RESUME trace events...' % t)
- time.sleep(t)
# stop ftrace
if(sysvals.usecallgraph or sysvals.usetraceevents):
+ if sysvals.useprocmon:
+ pm.stop()
sysvals.fsetVal('0', 'tracing_on')
print('CAPTURING TRACE')
writeDatafileHeader(sysvals.ftracefile, fwdata)
@@ -3806,15 +4146,12 @@ def executeSuspend():
def writeDatafileHeader(filename, fwdata):
global sysvals
- prt = sysvals.postresumetime
fp = open(filename, 'a')
fp.write(sysvals.teststamp+'\n')
- if(sysvals.suspendmode == 'mem'):
+ if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'):
for fw in fwdata:
if(fw):
fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
- if(prt > 0):
- fp.write('# post resume time %u\n' % prt)
fp.close()
# Function: setUSBDevicesAuto
@@ -4402,6 +4739,8 @@ def rerunTest():
'requires a dmesg file', False)
sysvals.setOutputFile()
vprint('Output file: %s' % sysvals.htmlfile)
+ if(os.path.exists(sysvals.htmlfile) and not os.access(sysvals.htmlfile, os.W_OK)):
+ doError('missing permission to write to %s' % sysvals.htmlfile, False)
print('PROCESSING DATA')
if(sysvals.usetraceeventsonly):
testruns = parseTraceLog()
@@ -4524,6 +4863,8 @@ def configFromFile(file):
sysvals.addlogs = checkArgBool(value)
elif(opt.lower() == 'dev'):
sysvals.usedevsrc = checkArgBool(value)
+ elif(opt.lower() == 'proc'):
+ sysvals.useprocmon = checkArgBool(value)
elif(opt.lower() == 'ignorekprobes'):
ignorekprobes = checkArgBool(value)
elif(opt.lower() == 'x2'):
@@ -4537,6 +4878,8 @@ def configFromFile(file):
value = value.split(',')
for i in value:
sysvals.debugfuncs.append(i.strip())
+ elif(opt.lower() == 'devicefilter'):
+ sysvals.setDeviceFilter(value)
elif(opt.lower() == 'expandcg'):
sysvals.cgexp = checkArgBool(value)
elif(opt.lower() == 'srgap'):
@@ -4548,8 +4891,10 @@ def configFromFile(file):
sysvals.testcommand = value
elif(opt.lower() == 'x2delay'):
sysvals.x2delay = getArgInt('-x2delay', value, 0, 60000, False)
- elif(opt.lower() == 'postres'):
- sysvals.postresumetime = getArgInt('-postres', value, 0, 3600, False)
+ elif(opt.lower() == 'predelay'):
+ sysvals.predelay = getArgInt('-predelay', value, 0, 60000, False)
+ elif(opt.lower() == 'postdelay'):
+ sysvals.postdelay = getArgInt('-postdelay', value, 0, 60000, False)
elif(opt.lower() == 'rtcwake'):
sysvals.rtcwake = True
sysvals.rtcwaketime = getArgInt('-rtcwake', value, 0, 3600, False)
@@ -4572,19 +4917,18 @@ def configFromFile(file):
except:
sysvals.synccolor = value
elif(opt.lower() == 'output-dir'):
- args = dict()
- n = datetime.now()
- args['date'] = n.strftime('%y%m%d')
- args['time'] = n.strftime('%H%M%S')
- args['hostname'] = sysvals.hostname
- sysvals.outdir = value.format(**args)
+ sysvals.setOutputFolder(value)
if sysvals.suspendmode == 'command' and not sysvals.testcommand:
doError('No command supplied for mode "command"', False)
+
+ # compatibility errors
if sysvals.usedevsrc and sysvals.usecallgraph:
- doError('dev and callgraph cannot both be true', False)
+ doError('-dev is not compatible with -f', False)
if sysvals.usecallgraph and sysvals.execcount > 1:
doError('-x2 is not compatible with -f', False)
+ if sysvals.usecallgraph and sysvals.useprocmon:
+ doError('-proc is not compatible with -f', False)
if ignorekprobes:
return
@@ -4637,8 +4981,7 @@ def configFromFile(file):
'name': name,
'func': function,
'format': format,
- 'args': args,
- 'mask': re.sub('{(?P<n>[a-z,A-Z,0-9]*)}', '.*', format)
+ 'args': args
}
if color:
sysvals.kprobes[name]['color'] = color
@@ -4670,44 +5013,45 @@ def printHelp():
print('')
print('Options:')
print(' [general]')
- print(' -h Print this help text')
- print(' -v Print the current tool version')
- print(' -config file Pull arguments and config options from a file')
- print(' -verbose Print extra information during execution and analysis')
- print(' -status Test to see if the system is enabled to run this tool')
- print(' -modes List available suspend modes')
- print(' -m mode Mode to initiate for suspend %s (default: %s)') % (modes, sysvals.suspendmode)
- print(' -o subdir Override the output subdirectory')
+ print(' -h Print this help text')
+ print(' -v Print the current tool version')
+ print(' -config fn Pull arguments and config options from file fn')
+ print(' -verbose Print extra information during execution and analysis')
+ print(' -status Test to see if the system is enabled to run this tool')
+ print(' -modes List available suspend modes')
+ print(' -m mode Mode to initiate for suspend %s (default: %s)') % (modes, sysvals.suspendmode)
+ print(' -o subdir Override the output subdirectory')
+ print(' -rtcwake t Use rtcwake to autoresume after <t> seconds (default: disabled)')
+ print(' -addlogs Add the dmesg and ftrace logs to the html output')
+ print(' -srgap Add a visible gap in the timeline between sus/res (default: disabled)')
print(' [advanced]')
- print(' -rtcwake t Use rtcwake to autoresume after <t> seconds (default: disabled)')
- print(' -addlogs Add the dmesg and ftrace logs to the html output')
- print(' -multi n d Execute <n> consecutive tests at <d> seconds intervals. The outputs will')
+ print(' -cmd {s} Run the timeline over a custom command, e.g. "sync -d"')
+ print(' -proc Add usermode process info into the timeline (default: disabled)')
+ print(' -dev Add kernel function calls and threads to the timeline (default: disabled)')
+ print(' -x2 Run two suspend/resumes back to back (default: disabled)')
+ print(' -x2delay t Include t ms delay between multiple test runs (default: 0 ms)')
+ print(' -predelay t Include t ms delay before 1st suspend (default: 0 ms)')
+ print(' -postdelay t Include t ms delay after last resume (default: 0 ms)')
+ print(' -mindev ms Discard all device blocks shorter than ms milliseconds (e.g. 0.001 for us)')
+ print(' -multi n d Execute <n> consecutive tests at <d> seconds intervals. The outputs will')
print(' be created in a new subdirectory with a summary page.')
- print(' -srgap Add a visible gap in the timeline between sus/res (default: disabled)')
- print(' -cmd {s} Instead of suspend/resume, run a command, e.g. "sync -d"')
- print(' -mindev ms Discard all device blocks shorter than ms milliseconds (e.g. 0.001 for us)')
- print(' -mincg ms Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)')
- print(' -timeprec N Number of significant digits in timestamps (0:S, [3:ms], 6:us)')
print(' [debug]')
- print(' -f Use ftrace to create device callgraphs (default: disabled)')
- print(' -expandcg pre-expand the callgraph data in the html output (default: disabled)')
- print(' -flist Print the list of functions currently being captured in ftrace')
- print(' -flistall Print all functions capable of being captured in ftrace')
- print(' -fadd file Add functions to be graphed in the timeline from a list in a text file')
- print(' -filter "d1 d2 ..." Filter out all but this list of device names')
- print(' -dev Display common low level functions in the timeline')
- print(' [post-resume task analysis]')
- print(' -x2 Run two suspend/resumes back to back (default: disabled)')
- print(' -x2delay t Minimum millisecond delay <t> between the two test runs (default: 0 ms)')
- print(' -postres t Time after resume completion to wait for post-resume events (default: 0 S)')
+ print(' -f Use ftrace to create device callgraphs (default: disabled)')
+ print(' -expandcg pre-expand the callgraph data in the html output (default: disabled)')
+ print(' -flist Print the list of functions currently being captured in ftrace')
+ print(' -flistall Print all functions capable of being captured in ftrace')
+ print(' -fadd file Add functions to be graphed in the timeline from a list in a text file')
+ print(' -filter "d1,d2,..." Filter out all but this comma-delimited list of device names')
+ print(' -mincg ms Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)')
+ print(' -timeprec N Number of significant digits in timestamps (0:S, [3:ms], 6:us)')
print(' [utilities]')
- print(' -fpdt Print out the contents of the ACPI Firmware Performance Data Table')
- print(' -usbtopo Print out the current USB topology with power info')
- print(' -usbauto Enable autosuspend for all connected USB devices')
+ print(' -fpdt Print out the contents of the ACPI Firmware Performance Data Table')
+ print(' -usbtopo Print out the current USB topology with power info')
+ print(' -usbauto Enable autosuspend for all connected USB devices')
print(' [re-analyze data from previous runs]')
- print(' -ftrace ftracefile Create HTML output using ftrace input')
- print(' -dmesg dmesgfile Create HTML output using dmesg (not needed for kernel >= 3.15)')
- print(' -summary directory Create a summary of all test in this dir')
+ print(' -ftrace ftracefile Create HTML output using ftrace input')
+ print(' -dmesg dmesgfile Create HTML output using dmesg (not needed for kernel >= 3.15)')
+ print(' -summary directory Create a summary of all test in this dir')
print('')
return True
@@ -4739,26 +5083,22 @@ if __name__ == '__main__':
sys.exit()
elif(arg == '-x2'):
sysvals.execcount = 2
- if(sysvals.usecallgraph):
- doError('-x2 is not compatible with -f', False)
elif(arg == '-x2delay'):
sysvals.x2delay = getArgInt('-x2delay', args, 0, 60000)
- elif(arg == '-postres'):
- sysvals.postresumetime = getArgInt('-postres', args, 0, 3600)
+ elif(arg == '-predelay'):
+ sysvals.predelay = getArgInt('-predelay', args, 0, 60000)
+ elif(arg == '-postdelay'):
+ sysvals.postdelay = getArgInt('-postdelay', args, 0, 60000)
elif(arg == '-f'):
sysvals.usecallgraph = True
- if(sysvals.execcount > 1):
- doError('-x2 is not compatible with -f', False)
- if(sysvals.usedevsrc):
- doError('-dev is not compatible with -f', False)
elif(arg == '-addlogs'):
sysvals.addlogs = True
elif(arg == '-verbose'):
sysvals.verbose = True
+ elif(arg == '-proc'):
+ sysvals.useprocmon = True
elif(arg == '-dev'):
sysvals.usedevsrc = True
- if(sysvals.usecallgraph):
- doError('-dev is not compatible with -f', False)
elif(arg == '-rtcwake'):
sysvals.rtcwake = True
sysvals.rtcwaketime = getArgInt('-rtcwake', args, 0, 3600)
@@ -4788,7 +5128,7 @@ if __name__ == '__main__':
val = args.next()
except:
doError('No subdirectory name supplied', True)
- sysvals.outdir = val
+ sysvals.setOutputFolder(val)
elif(arg == '-config'):
try:
val = args.next()
@@ -4842,6 +5182,14 @@ if __name__ == '__main__':
else:
doError('Invalid argument: '+arg, True)
+ # compatibility errors
+ if(sysvals.usecallgraph and sysvals.execcount > 1):
+ doError('-x2 is not compatible with -f', False)
+ if(sysvals.usecallgraph and sysvals.usedevsrc):
+ doError('-dev is not compatible with -f', False)
+ if(sysvals.usecallgraph and sysvals.useprocmon):
+ doError('-proc is not compatible with -f', False)
+
# callgraph size cannot exceed device size
if sysvals.mincglen < sysvals.mindevlen:
sysvals.mincglen = sysvals.mindevlen
- config file support added - dev mode for monitoring kernel source calls and async kernel threads - custom command support for executing a user cmd instead of suspend - proc mode support for monitoring user processes with cpu exec data - kprobe support for custom function tracing - advanced callgraph support for function debug - many bug fixes and formatting upgrades Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> --- scripts/analyze_suspend.py | 972 ++++++++++++++++++++++++++++++--------------- 1 file changed, 660 insertions(+), 312 deletions(-)