diff mbox series

[v3,3/4] arm64: dts: imx8mm: Add cpu speed grading and all OPPs

Message ID 5f2172c5e676d570b51ba66ff1ea9dd42b3e09fd.1557236799.git.leonard.crestez@nxp.com (mailing list archive)
State Superseded, archived
Headers show
Series cpufreq: Add imx-cpufreq-dt driver | expand

Commit Message

Leonard Crestez May 7, 2019, 1:52 p.m. UTC 
Add a nvmem cell on cpu node referencing speed grade and the 1.8 Ghz
cpufreq opp.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 0b2a585c5844..7eea47584f31 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -51,10 +51,12 @@ 
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
 		A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
@@ -98,18 +100,27 @@ 
 		opp-shared;
 
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <850000>;
+			opp-supported-hw = <0xe>, <0x7>;
 			clock-latency-ns = <150000>;
 		};
 
 		opp-1600000000 {
 			opp-hz = /bits/ 64 <1600000000>;
 			opp-microvolt = <900000>;
+			opp-supported-hw = <0xc>, <0x7>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			/* Consumer only but rely on speed grading */
+			opp-supported-hw = <0x8>, <0x7>;
 			clock-latency-ns = <150000>;
-			opp-suspend;
 		};
 	};
 
 	memory@40000000 {
 		device_type = "memory";
@@ -317,10 +328,14 @@ 
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
 				/* For nvmem subnodes */
 				#address-cells = <1>;
 				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
 			};
 
 			anatop: anatop@30360000 {
 				compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
 				reg = <0x30360000 0x10000>;