@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/regmap.h>
#include <linux/bitops.h>
+#include <linux/devm-helpers.h>
#define SBS_CHARGER_REG_SPEC_INFO 0x11
#define SBS_CHARGER_REG_STATUS 0x13
@@ -209,7 +210,12 @@ static int sbs_probe(struct i2c_client *client,
if (ret)
return dev_err_probe(&client->dev, ret, "Failed to request irq\n");
} else {
- INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+ ret = devm_delayed_work_autocancel(&client->dev, &chip->work,
+ sbs_delayed_work);
+ if (ret)
+ return dev_err_probe(&client->dev, ret,
+ "Failed to init work for polling\n");
+
schedule_delayed_work(&chip->work,
msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
}
@@ -220,15 +226,6 @@ static int sbs_probe(struct i2c_client *client,
return 0;
}
-static int sbs_remove(struct i2c_client *client)
-{
- struct sbs_info *chip = i2c_get_clientdata(client);
-
- cancel_delayed_work_sync(&chip->work);
-
- return 0;
-}
-
#ifdef CONFIG_OF
static const struct of_device_id sbs_dt_ids[] = {
{ .compatible = "sbs,sbs-charger" },
@@ -245,7 +242,6 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
static struct i2c_driver sbs_driver = {
.probe = sbs_probe,
- .remove = sbs_remove,
.id_table = sbs_id,
.driver = {
.name = "sbs-charger",
This driver can use an interrupt or polling in order get the charger's status. When using polling, a delayed work is used. However, the remove() function unconditionally call cancel_delayed_work_sync(), even if the delayed work is not used and is not initialized. In order to fix it, use devm_delayed_work_autocancel() and remove the now useless remove() function. Fixes: feb583e37f8a ("power: supply: add sbs-charger driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> --- 2 more comments: - i2c_set_clientdata() looks now useless and could be removed as well. I've left it because removing such assigned already played me some unexpected trick. - Should this be backported, devm_delayed_work_autocancel() is not really old and may not be available in older kernel. In this case a "if (!client->irq)" in the remove function would also fix the issue --- drivers/power/supply/sbs-charger.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)