@@ -7,12 +7,20 @@ Required properties:
marvell,armada375-thermal
marvell,armada380-thermal
marvell,armadaxp-thermal
+ marvell,armada-ap806-thermal
+ marvell,armada-cp110-thermal
- reg: Device's register space.
Two entries are expected, see the examples below.
The first one is required for the sensor register;
- the second one is required for the control register
+ the second one is required for the control area
to be used for sensor initialization (a.k.a. calibration).
+ The size of the control area must be 4 for
+ marvell,armada370-thermal, marvell,armada380-thermal, and
+ marvell,armadaxp-thermal. The size must be 8 for
+ marvell,armada375-thermal, marvell,armada-ap806-thermal, and
+ marvell,armada-cp110-thermal.
+
Example:
Add compatible strings for AP806 and CP110 that are part of the Armada 8k/7k line of SoCs. Add a note on the difference in the size of the control area in different bindings. This is an existing difference between the Armada 375 binding and the rest. The new AP806 and CP110 bindings are similar to the existing Armada 375 in this regard. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- Documentation/devicetree/bindings/thermal/armada-thermal.txt | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)