[v4,2/9] mfd: intel_soc_pmic_bxtwc: remove thermal second level irqs

Commit Message

Kuppuswamy Sathyanarayanan May 31, 2017, 5:19 a.m. UTC

From: Kuppuswamy Sathyanarayanan <[e-mail]>

Since all second level thermal irqs are consumed by the same
device(bxt_wcove_thermal), there is no need to expose them as separate
interrupts. We can just export only the first level irqs for thermal and
let the device(bxt_wcove_thermal) driver handle the second level irqs
based on thermal interrupt status register. Also, just using only the
first level irq will eliminate the bug involved in requesting only the
second level irq and not explicitly enable the first level irq. For
more info on this issue please read the details at,

https://lkml.org/lkml/2017/2/27/148

Signed-off-by: Kuppuswamy Sathyanarayanan <[e-mail]>
Acked-for-MFD-by: Lee Jones <[e-mail]>
---
 drivers/mfd/intel_soc_pmic_bxtwc.c | 32 ++++++++++++--------------------
 1 file changed, 12 insertions(+), 20 deletions(-)

Changes since v1:
 * None

Changes since v2: 
 * Rebased on top of latest release.

Changes since v3:
 * Rebased on top of latest release.

Patch

diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index 7cbaf1e..7c1ed27 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -84,10 +84,7 @@  enum bxtwc_irqs {
 
 enum bxtwc_irqs_level2 {
 	/* Level 2 */
-	BXTWC_THRM0_IRQ = 0,
-	BXTWC_THRM1_IRQ,
-	BXTWC_THRM2_IRQ,
-	BXTWC_BCU_IRQ,
+	BXTWC_BCU_IRQ = 0,
 	BXTWC_ADC_IRQ,
 	BXTWC_USBC_IRQ,
 	BXTWC_CHGR0_IRQ,
@@ -114,17 +111,14 @@  static const struct regmap_irq bxtwc_regmap_irqs[] = {
 };
 
 static const struct regmap_irq bxtwc_regmap_irqs_level2[] = {
-	REGMAP_IRQ_REG(BXTWC_THRM0_IRQ, 0, 0xff),
-	REGMAP_IRQ_REG(BXTWC_THRM1_IRQ, 1, 0xbf),
-	REGMAP_IRQ_REG(BXTWC_THRM2_IRQ, 2, 0xff),
-	REGMAP_IRQ_REG(BXTWC_BCU_IRQ, 3, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 4, 0xff),
-	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 5, BIT(5)),
-	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 5, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 6, 0x1f),
-	REGMAP_IRQ_REG(BXTWC_GPIO0_IRQ, 7, 0xff),
-	REGMAP_IRQ_REG(BXTWC_GPIO1_IRQ, 8, 0x3f),
-	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 9, 0x03),
+	REGMAP_IRQ_REG(BXTWC_BCU_IRQ, 0, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 1, 0xff),
+	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 2, BIT(5)),
+	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 2, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 3, 0x1f),
+	REGMAP_IRQ_REG(BXTWC_GPIO0_IRQ, 4, 0xff),
+	REGMAP_IRQ_REG(BXTWC_GPIO1_IRQ, 5, 0x3f),
+	REGMAP_IRQ_REG(BXTWC_CRIT_IRQ, 6, 0x03),
 };
 
 static const struct regmap_irq bxtwc_regmap_irqs_tmu[] = {
@@ -142,8 +136,8 @@  static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
 
 static struct regmap_irq_chip bxtwc_regmap_irq_chip_level2 = {
 	.name = "bxtwc_irq_chip_level2",
-	.status_base = BXTWC_THRM0IRQ,
-	.mask_base = BXTWC_MTHRM0IRQ,
+	.status_base = BXTWC_BCUIRQ,
+	.mask_base = BXTWC_MBCUIRQ,
 	.irqs = bxtwc_regmap_irqs_level2,
 	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_level2),
 	.num_regs = 10,
@@ -177,9 +171,7 @@  static struct resource charger_resources[] = {
 };
 
 static struct resource thermal_resources[] = {
-	DEFINE_RES_IRQ(BXTWC_THRM0_IRQ),
-	DEFINE_RES_IRQ(BXTWC_THRM1_IRQ),
-	DEFINE_RES_IRQ(BXTWC_THRM2_IRQ),
+	DEFINE_RES_IRQ(BXTWC_THRM_LVL1_IRQ),
 };
 
 static struct resource bcu_resources[] = {