@@ -606,6 +606,12 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
pci_set_drvdata(pdev, tb);
+ pm_runtime_allow(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 10000);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
}
@@ -613,6 +619,9 @@ static void nhi_remove(struct pci_dev *pdev)
{
struct tb *tb = pci_get_drvdata(pdev);
struct tb_nhi *nhi = tb->nhi;
+
+ pm_runtime_get(&pdev->dev);
+ pm_runtime_forbid(&pdev->dev);
thunderbolt_shutdown_and_free(tb);
nhi_shutdown(nhi);
}
@@ -630,6 +639,8 @@ static const struct dev_pm_ops nhi_pm_ops = {
* pci-tunnels stay alive.
*/
.restore_noirq = nhi_resume_noirq,
+ .runtime_suspend = nhi_suspend_noirq,
+ .runtime_resume = nhi_resume_noirq,
};
struct pci_device_id nhi_ids[] = {
@@ -5,6 +5,7 @@
*/
#include <linux/delay.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include "tb.h"
@@ -326,6 +327,11 @@ void tb_switch_free(struct tb_switch *sw)
if (!sw->is_unplugged)
tb_plug_events_active(sw, false);
+ if (sw != sw->tb->root_switch) {
+ pm_runtime_mark_last_busy(&sw->tb->nhi->pdev->dev);
+ pm_runtime_put_autosuspend(&sw->tb->nhi->pdev->dev);
+ }
+
kfree(sw->ports);
kfree(sw->drom);
kfree(sw);
@@ -418,6 +424,9 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, u64 route)
if (tb_plug_events_active(sw, true))
goto err;
+ if (tb->root_switch)
+ pm_runtime_get(&tb->nhi->pdev->dev);
+
return sw;
err:
kfree(sw->ports);
@@ -7,6 +7,7 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/pm_runtime.h>
#include "tb.h"
#include "tb_regs.h"
@@ -217,8 +218,11 @@ static void tb_handle_hotplug(struct work_struct *work)
{
struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work);
struct tb *tb = ev->tb;
+ struct device *dev = &tb->nhi->pdev->dev;
struct tb_switch *sw;
struct tb_port *port;
+
+ pm_runtime_get(dev);
mutex_lock(&tb->lock);
if (!tb->hotplug_active)
goto out; /* during init, suspend or shutdown */
@@ -274,6 +278,8 @@ static void tb_handle_hotplug(struct work_struct *work)
out:
mutex_unlock(&tb->lock);
kfree(ev);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
/**
@@ -433,4 +439,11 @@ void thunderbolt_resume(struct tb *tb)
tb->hotplug_active = true;
mutex_unlock(&tb->lock);
tb_info(tb, "resume finished\n");
+
+ /*
+ * If runtime resuming due to a hotplug event (rather than resuming
+ * from system sleep), wait for it to arrive. May take about 700 ms.
+ */
+ if (tb->nhi->pdev->dev.power.runtime_status == RPM_RESUMING)
+ msleep(1000);
}
Runtime suspend the NHI when no Thunderbolt devices have been plugged in for 10 sec (user-configurable via autosuspend_delay_ms in sysfs). The NHI is not able to detect plug events while suspended, it relies on the upstream bridge to resume it on hotplug. After the NHI resumes, it takes about 700 ms until a hotplug event appears on the RX ring. In case autosuspend_delay_ms has been reduced to 0 by the user, we need to wait in tb_resume() to avoid going back to sleep before we had a chance to detect the hotplugged device. A runtime pm ref is held for the duration of tb_handle_hotplug() to keep the NHI awake while the hotplug event is processed. Apart from that we acquire a runtime pm ref for each newly allocated switch (except for the root switch) and drop one when a switch is freed, thereby ensuring the NHI stays active as long as devices are plugged in. This behaviour is identical to the OS X driver. Cc: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> --- drivers/thunderbolt/nhi.c | 11 +++++++++++ drivers/thunderbolt/switch.c | 9 +++++++++ drivers/thunderbolt/tb.c | 13 +++++++++++++ 3 files changed, 33 insertions(+)