diff mbox series

[02/22] docs: thermal: convert cpu-idle-cooling.rst to ReST

Message ID 7640755514809a7b5fe2756f3702613865877dcb.1592203650.git.mchehab+huawei@kernel.org (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series None | expand

Commit Message

Mauro Carvalho Chehab June 15, 2020, 6:50 a.m. UTC
Despite being named with .rst extension, this file doesn't
match the ReST standard. It actually causes a crash at
Sphinx:

	Sphinx parallel build error:
	docutils.utils.SystemMessage: /devel/v4l/docs/Documentation/driver-api/thermal/cpu-idle-cooling.rst:69: (SEVERE/4) Unexpected section title.

Add needed markups for it to be properly parsed.

While here, add it to the thermal index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../driver-api/thermal/cpu-idle-cooling.rst        | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

Comments

Jonathan Corbet June 19, 2020, 8:02 p.m. UTC | #1
On Mon, 15 Jun 2020 08:50:07 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Despite being named with .rst extension, this file doesn't
> match the ReST standard. It actually causes a crash at
> Sphinx:
> 
> 	Sphinx parallel build error:
> 	docutils.utils.SystemMessage: /devel/v4l/docs/Documentation/driver-api/thermal/cpu-idle-cooling.rst:69: (SEVERE/4) Unexpected section title.
> 
> Add needed markups for it to be properly parsed.
> 
> While here, add it to the thermal index.rst.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---

Applied (though I took out the line about adding it to index.rst since
this patch doesn't do that...)

Thanks,

jon
diff mbox series

Patch

diff --git a/Documentation/driver-api/thermal/cpu-idle-cooling.rst b/Documentation/driver-api/thermal/cpu-idle-cooling.rst
index b9f34ceb2a38..c2a7ca676853 100644
--- a/Documentation/driver-api/thermal/cpu-idle-cooling.rst
+++ b/Documentation/driver-api/thermal/cpu-idle-cooling.rst
@@ -1,3 +1,5 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
 ================
 CPU Idle Cooling
 ================
@@ -48,7 +50,7 @@  idle state target residency, we lead to dropping the static and the
 dynamic leakage for this period (modulo the energy needed to enter
 this state). So the sustainable power with idle cycles has a linear
 relation with the OPP’s sustainable power and can be computed with a
-coefficient similar to:
+coefficient similar to::
 
 	    Power(IdleCycle) = Coef x Power(OPP)
 
@@ -139,7 +141,7 @@  Power considerations
 --------------------
 
 When we reach the thermal trip point, we have to sustain a specified
-power for a specific temperature but at this time we consume:
+power for a specific temperature but at this time we consume::
 
  Power = Capacitance x Voltage^2 x Frequency x Utilisation
 
@@ -148,7 +150,7 @@  wrong in the system setup). The ‘Capacitance’ and ‘Utilisation’ are a
 fixed value, ‘Voltage’ and the ‘Frequency’ are fixed artificially
 because we don’t want to change the OPP. We can group the
 ‘Capacitance’ and the ‘Utilisation’ into a single term which is the
-‘Dynamic Power Coefficient (Cdyn)’ Simplifying the above, we have:
+‘Dynamic Power Coefficient (Cdyn)’ Simplifying the above, we have::
 
  Pdyn = Cdyn x Voltage^2 x Frequency
 
@@ -157,7 +159,7 @@  in order to target the sustainable power defined in the device
 tree. So with the idle injection mechanism, we want an average power
 (Ptarget) resulting in an amount of time running at full power on a
 specific OPP and idle another amount of time. That could be put in a
-equation:
+equation::
 
  P(opp)target = ((Trunning x (P(opp)running) + (Tidle x P(opp)idle)) /
 			(Trunning + Tidle)
@@ -168,7 +170,7 @@  equation:
 
 At this point if we know the running period for the CPU, that gives us
 the idle injection we need. Alternatively if we have the idle
-injection duration, we can compute the running duration with:
+injection duration, we can compute the running duration with::
 
  Trunning = Tidle / ((P(opp)running / P(opp)target) - 1)
 
@@ -191,7 +193,7 @@  However, in this demonstration we ignore three aspects:
    target residency, otherwise we end up consuming more energy and
    potentially invert the mitigation effect
 
-So the final equation is:
+So the final equation is::
 
  Trunning = (Tidle - Twakeup ) x
 		(((P(opp)dyn + P(opp)static ) - P(opp)target) / P(opp)target )