| Message ID | 9d2132d4713321a83cdeef3cdc8887b7d39340e6.1713147645.git.zhoubinbin@loongson.cn (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | thermal: loongson2: Add Loongson-2K0500 and Loongson-2K2000 thermal support | expand |
On 15/04/2024 04:31, Binbin Zhou wrote: > The temperature output register of the Loongson-2K2000 is defined in the > chip configuration domain, which is different from the Loongson-2K1000, > so it can't be fallbacked. > > We need to use two groups of registers to describe it: the first group > is the high and low temperature threshold setting register; the second > group is the temperature output register. > > It is true that this fix will cause ABI corruption, but it is necessary > otherwise the Loongson-2K2000 temperature sensor will not work properly. > > Fixes: 72684d99a854 ("thermal: dt-bindings: add loongson-2 thermal") > Cc: Yinbo Zhu <zhuyinbo@loongson.cn> > Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> > --- > .../thermal/loongson,ls2k-thermal.yaml | 23 +++++++++++++++++-- > 1 file changed, 21 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml > index 9748a479dcd4..fac6f64d6c67 100644 > --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml > +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml > @@ -18,14 +18,15 @@ properties: > oneOf: > - enum: > - loongson,ls2k1000-thermal > + - loongson,ls2k2000-thermal > - items: > - enum: > - loongson,ls2k0500-thermal > - - loongson,ls2k2000-thermal > - const: loongson,ls2k1000-thermal > > reg: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > > interrupts: > maxItems: 1 > @@ -41,6 +42,24 @@ required: > > unevaluatedProperties: false > > +if: This goes before unevaluatedProperties, just like in example schema. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Mon, Apr 15, 2024 at 2:04 PM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 15/04/2024 04:31, Binbin Zhou wrote: > > The temperature output register of the Loongson-2K2000 is defined in the > > chip configuration domain, which is different from the Loongson-2K1000, > > so it can't be fallbacked. > > > > We need to use two groups of registers to describe it: the first group > > is the high and low temperature threshold setting register; the second > > group is the temperature output register. > > > > It is true that this fix will cause ABI corruption, but it is necessary > > otherwise the Loongson-2K2000 temperature sensor will not work properly. > > > > Fixes: 72684d99a854 ("thermal: dt-bindings: add loongson-2 thermal") > > Cc: Yinbo Zhu <zhuyinbo@loongson.cn> > > Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> > > --- > > .../thermal/loongson,ls2k-thermal.yaml | 23 +++++++++++++++++-- > > 1 file changed, 21 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml > > index 9748a479dcd4..fac6f64d6c67 100644 > > --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml > > +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml > > @@ -18,14 +18,15 @@ properties: > > oneOf: > > - enum: > > - loongson,ls2k1000-thermal > > + - loongson,ls2k2000-thermal > > - items: > > - enum: > > - loongson,ls2k0500-thermal > > - - loongson,ls2k2000-thermal > > - const: loongson,ls2k1000-thermal > > > > reg: > > - maxItems: 1 > > + minItems: 1 > > + maxItems: 2 > > > > interrupts: > > maxItems: 1 > > @@ -41,6 +42,24 @@ required: > > > > unevaluatedProperties: false > > > > +if: > > This goes before unevaluatedProperties, just like in example schema. > Hi Krzysztof: Thanks for your reply. I will adjust the position of this part in the next version. Thanks. Binbin > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Best regards, > Krzysztof >
diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml index 9748a479dcd4..fac6f64d6c67 100644 --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml @@ -18,14 +18,15 @@ properties: oneOf: - enum: - loongson,ls2k1000-thermal + - loongson,ls2k2000-thermal - items: - enum: - loongson,ls2k0500-thermal - - loongson,ls2k2000-thermal - const: loongson,ls2k1000-thermal reg: - maxItems: 1 + minItems: 1 + maxItems: 2 interrupts: maxItems: 1 @@ -41,6 +42,24 @@ required: unevaluatedProperties: false +if: + properties: + compatible: + contains: + enum: + - loongson,ls2k2000-thermal + +then: + properties: + reg: + minItems: 2 + maxItems: 2 + +else: + properties: + reg: + maxItems: 1 + examples: - | #include <dt-bindings/interrupt-controller/irq.h>
The temperature output register of the Loongson-2K2000 is defined in the chip configuration domain, which is different from the Loongson-2K1000, so it can't be fallbacked. We need to use two groups of registers to describe it: the first group is the high and low temperature threshold setting register; the second group is the temperature output register. It is true that this fix will cause ABI corruption, but it is necessary otherwise the Loongson-2K2000 temperature sensor will not work properly. Fixes: 72684d99a854 ("thermal: dt-bindings: add loongson-2 thermal") Cc: Yinbo Zhu <zhuyinbo@loongson.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> --- .../thermal/loongson,ls2k-thermal.yaml | 23 +++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)