diff mbox series

[RESEND,v10,03/11] power: supply: bd70528: rename linear_range to avoid collision

Message ID b523223f3ba5e570bb9d2ef197db24c5ea88319d.1586925868.git.matti.vaittinen@fi.rohmeurope.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Support ROHM BD99954 charger IC | expand

Commit Message

Vaittinen, Matti April 29, 2020, 6:56 a.m. UTC 
Follow-up patches in this series will add a generic struct
linear_range. Rename bd70528 internal struct to avoid collision.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---

No changes since v9

 drivers/power/supply/bd70528-charger.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c
index b8e1ec106627..3b820110ecfa 100644
--- a/drivers/power/supply/bd70528-charger.c
+++ b/drivers/power/supply/bd70528-charger.c
@@ -335,14 +335,14 @@  static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
 	return 0;
 }
 
-struct linear_range {
+struct bd70528_linear_range {
 	int min;
 	int step;
 	int vals;
 	int low_sel;
 };
 
-static const struct linear_range current_limit_ranges[] = {
+static const struct bd70528_linear_range current_limit_ranges[] = {
 	{
 		.min = 5,
 		.step = 1,
@@ -374,7 +374,7 @@  static const struct linear_range current_limit_ranges[] = {
  * voltage for low temperatures. The driver currently only reads
  * the charge current at room temperature. We do set both though.
  */
-static const struct linear_range warm_charge_curr[] = {
+static const struct bd70528_linear_range warm_charge_curr[] = {
 	{
 		.min = 10,
 		.step = 10,
@@ -398,7 +398,7 @@  static const struct linear_range warm_charge_curr[] = {
 #define MAX_WARM_CHG_CURR_SEL 0x1f
 #define MIN_CHG_CURR_SEL 0x0
 
-static int find_value_for_selector_low(const struct linear_range *r,
+static int find_value_for_selector_low(const struct bd70528_linear_range *r,
 				       int selectors, unsigned int sel,
 				       unsigned int *val)
 {
@@ -420,7 +420,7 @@  static int find_value_for_selector_low(const struct linear_range *r,
  * I guess it is enough if we use voltage/current which is closest (below)
  * the requested?
  */
-static int find_selector_for_value_low(const struct linear_range *r,
+static int find_selector_for_value_low(const struct bd70528_linear_range *r,
 				       int selectors, unsigned int val,
 				       unsigned int *sel, bool *found)
 {