diff mbox

[v2,04/16] ARM: dtsi: axp209: add node for ADC

Message ID d4de180d7f9555c3851f29a8c34d1f706cafd83e.1515486346.git-series.quentin.schulz@free-electrons.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Quentin Schulz Jan. 9, 2018, 9:33 a.m. UTC
This adds a DT node for the ADC of the PMIC so that there can be
consumers of its IIO channels declaring their consumptions via DT.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
 arch/arm/boot/dts/axp209.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Maxime Ripard Jan. 9, 2018, 9:48 a.m. UTC | #1
On Tue, Jan 09, 2018 at 10:33:35AM +0100, Quentin Schulz wrote:
> This adds a DT node for the ADC of the PMIC so that there can be
> consumers of its IIO channels declaring their consumptions via DT.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> ---
>  arch/arm/boot/dts/axp209.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
> index 897103e..a2e0052 100644
> --- a/arch/arm/boot/dts/axp209.dtsi
> +++ b/arch/arm/boot/dts/axp209.dtsi
> @@ -58,6 +58,11 @@
>  		status = "disabled";
>  	};
>  
> +	axp_adc: axp-adc {

The node nade should be adc.

> +		compatible = "x-powers,axp20x-adc";

And your compatible shouldn't have a wildcard but the first design
that introduced that IP.

Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 897103e..a2e0052 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -58,6 +58,11 @@ 
 		status = "disabled";
 	};
 
+	axp_adc: axp-adc {
+		compatible = "x-powers,axp20x-adc";
+		#io-channel-cells = <1>;
+	};
+
 	axp_gpio: gpio {
 		compatible = "x-powers,axp209-gpio";
 		gpio-controller;