From patchwork Tue Mar 26 12:21:10 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mariusz Tkaczyk X-Patchwork-Id: 13604045 Received: from mgamail.intel.com (mgamail.intel.com [192.198.163.10]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2D60C71B42 for ; Tue, 26 Mar 2024 12:21:38 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=192.198.163.10 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711455702; cv=none; b=FM7YsBpEwrSQipx89KMMD84SlcHTJlSeL6eXrMnUuN/jouO39M+BF1C9Eem9NVK/9AlUXqhYVidSzLQLFOm7/eo69Od9I4b4ZQCAtrYKoXvnmwiXAi6gJ5uUv0nAG+E1lJhbY6eB/qmhDJvCjBpNQIeBZfYK5UXS/qvyr4g6+yU= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711455702; c=relaxed/simple; bh=QWteiz489qsqpzWsF5uiAlo9ksS84lfWqFUe2FQqdOg=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=bxGv2pazBRUk73arnOEdAPWWn706l9aixwcM48MV3i+gYsTH2TpXKx7E7wH4ABPruN0uba0ZY5vsSrNIQSXtNZewd1EIpmkhKVaGHpX+nPG9CMtyuEHgALKqjEfCBrDeCMZkyDTTrjmuBI4LOV59+Pfk78j9L8K5WizInZh9ZyY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.intel.com; spf=none smtp.mailfrom=linux.intel.com; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b=MuBvp6sj; arc=none smtp.client-ip=192.198.163.10 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.intel.com Authentication-Results: smtp.subspace.kernel.org; spf=none smtp.mailfrom=linux.intel.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="MuBvp6sj" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1711455698; x=1742991698; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=QWteiz489qsqpzWsF5uiAlo9ksS84lfWqFUe2FQqdOg=; b=MuBvp6sjqF6QL0QbBgF6sUKH0vQaMi+8EHu9oS0jxTs7CLpg2C8M83q4 PvwVdBP27s+rgGuxPFUhvP+swx/l24BuU+jHmitqCrYnF8jmiy8KRIm9z qQQxG+PDslJYu8Tp8tepzwKtjtFsbgJMwuv7tt78kB93g83Evagk0Mg7H rVZvieMliXdlzKq7sJP4XFvZGfJ1TNU47OOlkVeSzV4ooG1Bv01djyA1h HnFD4kmy6Q35KercjmGacExibfo2Uf7LxU8NSbeFYlee0nU646cByDEns MUBeuUFrpJ3yZPgYdsLrNUFA5cp9UvzVzVI8IC50RScn/5P6eEL6MLZSO g==; X-CSE-ConnectionGUID: zive0DNCQQOz1L8xcZZhiA== X-CSE-MsgGUID: JElwjyrbQ/mJAk60gFYByw== X-IronPort-AV: E=McAfee;i="6600,9927,11024"; a="17891008" X-IronPort-AV: E=Sophos;i="6.07,156,1708416000"; d="scan'208";a="17891008" Received: from fmviesa005.fm.intel.com ([10.60.135.145]) by fmvoesa104.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 26 Mar 2024 05:21:38 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="6.07,156,1708416000"; d="scan'208";a="20425513" Received: from unknown (HELO mtkaczyk-devel.igk.intel.com) ([10.102.108.91]) by fmviesa005-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 26 Mar 2024 05:21:36 -0700 From: Mariusz Tkaczyk To: linux-raid@vger.kernel.org Cc: Mariusz Tkaczyk , Jes Sorensen , Nix Subject: [PATCH 1/3] mdadm: add CHANGELOG.md Date: Tue, 26 Mar 2024 13:21:10 +0100 Message-Id: <20240326122112.25552-2-mariusz.tkaczyk@linux.intel.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20240326122112.25552-1-mariusz.tkaczyk@linux.intel.com> References: <20240326122112.25552-1-mariusz.tkaczyk@linux.intel.com> Precedence: bulk X-Mailing-List: linux-raid@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Bring changelog back to life. Remove ANNOUCEs. It will use markdown format, to have one style. All releases are migrated to new changelog. It was a exercise I have taken, to familiarize with the mdadm history. Signed-off-by: Mariusz Tkaczyk --- ANNOUNCE-3.0 | 98 ------------- ANNOUNCE-3.0.1 | 22 --- ANNOUNCE-3.0.2 | 21 --- ANNOUNCE-3.0.3 | 29 ---- ANNOUNCE-3.1 | 33 ----- ANNOUNCE-3.1.1 | 39 ------ ANNOUNCE-3.1.2 | 46 ------- ANNOUNCE-3.1.3 | 46 ------- ANNOUNCE-3.1.4 | 37 ----- ANNOUNCE-3.1.5 | 42 ------ ANNOUNCE-3.2 | 77 ----------- ANNOUNCE-3.2.1 | 75 ---------- ANNOUNCE-3.2.2 | 36 ----- ANNOUNCE-3.2.3 | 24 ---- ANNOUNCE-3.2.4 | 144 ------------------- ANNOUNCE-3.2.5 | 31 ----- ANNOUNCE-3.2.6 | 57 -------- ANNOUNCE-3.3 | 63 --------- ANNOUNCE-3.3.1 | 23 ---- ANNOUNCE-3.3.2 | 16 --- ANNOUNCE-3.3.3 | 18 --- ANNOUNCE-3.3.4 | 37 ----- ANNOUNCE-3.4 | 24 ---- ANNOUNCE-4.0 | 22 --- ANNOUNCE-4.1 | 16 --- ANNOUNCE-4.2 | 19 --- CHANGELOG.md | 368 +++++++++++++++++++++++++++++++++++++++++++++++++ ChangeLog | 306 ---------------------------------------- 28 files changed, 368 insertions(+), 1401 deletions(-) delete mode 100644 ANNOUNCE-3.0 delete mode 100644 ANNOUNCE-3.0.1 delete mode 100644 ANNOUNCE-3.0.2 delete mode 100644 ANNOUNCE-3.0.3 delete mode 100644 ANNOUNCE-3.1 delete mode 100644 ANNOUNCE-3.1.1 delete mode 100644 ANNOUNCE-3.1.2 delete mode 100644 ANNOUNCE-3.1.3 delete mode 100644 ANNOUNCE-3.1.4 delete mode 100644 ANNOUNCE-3.1.5 delete mode 100644 ANNOUNCE-3.2 delete mode 100644 ANNOUNCE-3.2.1 delete mode 100644 ANNOUNCE-3.2.2 delete mode 100644 ANNOUNCE-3.2.3 delete mode 100644 ANNOUNCE-3.2.4 delete mode 100644 ANNOUNCE-3.2.5 delete mode 100644 ANNOUNCE-3.2.6 delete mode 100644 ANNOUNCE-3.3 delete mode 100644 ANNOUNCE-3.3.1 delete mode 100644 ANNOUNCE-3.3.2 delete mode 100644 ANNOUNCE-3.3.3 delete mode 100644 ANNOUNCE-3.3.4 delete mode 100644 ANNOUNCE-3.4 delete mode 100644 ANNOUNCE-4.0 delete mode 100644 ANNOUNCE-4.1 delete mode 100644 ANNOUNCE-4.2 create mode 100644 CHANGELOG.md delete mode 100644 ChangeLog diff --git a/ANNOUNCE-3.0 b/ANNOUNCE-3.0 deleted file mode 100644 index f2d4f8475506..000000000000 --- a/ANNOUNCE-3.0 +++ /dev/null @@ -1,98 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.0 - A tool for managing Soft RAID under Linux - -I am pleased to (finally) announce the availability of - mdadm version 3.0 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - - -This is a major new version and as such should be treated with some -caution. However it has seen substantial testing and is considerred -to be ready for wide use. - - -The significant change which justifies the new major version number is -that mdadm can now handle metadata updates entirely in userspace. -This allows mdadm to support metadata formats that the kernel knows -nothing about. - -Currently two such metadata formats are supported: - - DDF - The SNIA standard format - - Intel Matrix - The metadata used by recent Intel ICH controlers. - -Also the approach to device names has changed significantly. - -If udev is installed on the system, mdadm will not create any devices -in /dev. Rather it allows udev to manage those devices. For this to work -as expected, the included udev rules file should be installed. - -If udev is not installed, mdadm will still create devices and symlinks -as required, and will also remove them when the array is stopped. - -mdadm now requires all devices which do not have a standard name (mdX -or md_dX) to live in the directory /dev/md/. Names in this directory -will always be created as symlinks back to the standard name in /dev. - -The man pages contain some information about the new externally managed -metadata. However see below for a more condensed overview. - -Externally managed metadata introduces the concept of a 'container'. -A container is a collection of (normally) physical devices which have -a common set of metadata. A container is assembled as an md array, but -is left 'inactive'. - -A container can contain one or more data arrays. These are composed from -slices (partitions?) of various devices in the container. - -For example, a 5 devices DDF set can container a RAID1 using the first -half of two devices, a RAID0 using the first half of the remain 3 devices, -and a RAID5 over thte second half of all 5 devices. - -A container can be created with - - mdadm --create /dev/md0 -e ddf -n5 /dev/sd[abcde] - -or "-e imsm" to use the Intel Matrix Storage Manager. - -An array can be created within a container either by giving the -container name and the only member: - - mdadm -C /dev/md1 --level raid1 -n 2 /dev/md0 - -or by listing the component devices - - mdadm -C /dev/md2 --level raid0 -n 3 /dev/sd[cde] - -To assemble a container, it is easiest just to pass each device in turn to -mdadm -I - - for i in /dev/sd[abcde] - do mdadm -I $i - done - -This will assemble the container and the components. - -Alternately the container can be assembled explicitly - - mdadm -A /dev/md0 /dev/sd[abcde] - -Then the components can all be assembled with - - mdadm -I /dev/md0 - -For each container, mdadm will start a program called "mdmon" which will -monitor the array and effect any metadata updates needed. The array is -initially assembled readonly. It is up to "mdmon" to mark the metadata -as 'dirty' and which the array to 'read-write'. - -The version 0.90 and 1.x metadata formats supported by previous -versions for mdadm are still supported and the kernel still performs -the same updates it use to. The new 'mdmon' approach is only used for -newly introduced metadata types. - -NeilBrown 2nd June 2009 diff --git a/ANNOUNCE-3.0.1 b/ANNOUNCE-3.0.1 deleted file mode 100644 index 91b44284b32e..000000000000 --- a/ANNOUNCE-3.0.1 +++ /dev/null @@ -1,22 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.0.1 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.0.1 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - - -This contains only minor bug fixes over 3.0. If you are using -3.0, you could consider upgrading. - -The brief change log is: - - Fix various segfaults - - Fixed for --examine with containers - - Lots of other little fixes. - -NeilBrown 25th September 2009 diff --git a/ANNOUNCE-3.0.2 b/ANNOUNCE-3.0.2 deleted file mode 100644 index 93643d178e21..000000000000 --- a/ANNOUNCE-3.0.2 +++ /dev/null @@ -1,21 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.0.2 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.0.2 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - - -This just contains one bugfix over 3.0.1 - I was obviously a bit hasty -in releasing that one. - -The brief change log is: - - Fix crash when hosthost is not set, as often happens in - early boot. - -NeilBrown 25th September 2009 diff --git a/ANNOUNCE-3.0.3 b/ANNOUNCE-3.0.3 deleted file mode 100644 index d6117a1ddc29..000000000000 --- a/ANNOUNCE-3.0.3 +++ /dev/null @@ -1,29 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.0.3 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.0.3 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - - -This contains a collection of bug fixes and minor enhancements over -3.0.1. - -The brief change log is: - - Improvements for creating arrays giving just a name, like 'foo', - rather than the full '/dev/md/foo'. - - Improvements for assembling member arrays of containers. - - Improvements to test suite - - Add option to change increment for RebuildNN messages reported - by "mdadm --monitor" - - Improvements to mdmon 'hand-over' from initrd to final root. - - Handle merging of devices that have left an IMSM array and are - being re-incorporated. - - Add missing space in "--detail --brief" output. - -NeilBrown 22nd October 2009 diff --git a/ANNOUNCE-3.1 b/ANNOUNCE-3.1 deleted file mode 100644 index 343b85da6274..000000000000 --- a/ANNOUNCE-3.1 +++ /dev/null @@ -1,33 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.1 - A tool for managing Soft RAID under Linux - -Hot on the heals of 3.0.3 I am pleased to announce the availability of - mdadm version 3.1 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - - -It contains significant feature enhancements over 3.0.x - -The brief change log is: - - Support --grow to change the layout of RAID4/5/6 - - Support --grow to change the chunksize of raid 4/5/6 - - Support --grow to change level from RAID1 -> RAID5 -> RAID6 and - back. - - Support --grow to reduce the number of devices in RAID4/5/6. - - Support restart of these grow options which assembling an array - which is partially grown. - - Assorted tests of this code, and of different RAID6 layouts. - -Note that a 2.6.31 or later is needed to have access to these. -Reducing devices in a RAID4/5/6 requires 2.6.32. -Changing RAID5 to RAID1 requires 2.6.33. - -You should only upgrade if you need to use, or which to test, these -features. - -NeilBrown 22nd October 2009 diff --git a/ANNOUNCE-3.1.1 b/ANNOUNCE-3.1.1 deleted file mode 100644 index 9e480dc0e315..000000000000 --- a/ANNOUNCE-3.1.1 +++ /dev/null @@ -1,39 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.1.1 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.1.1 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - -This is a bugfix release over 3.1, which was withdrawn due to serious -bugs. So it might be best to ignore 3.1 and say that this is a significant -feature release over 3.0.x - -Significant changes are: - - RAID level conversion between RAID1, RAID5, and RAID6 are - possible were the kernel supports it (2.6.32 at least) - - online chunksize and layout changing for RAID5 and RAID6 - where the kernel supports it. - - reduce the number of devices in a RAID4/5/6 array. - - - The default metadata is not v1.1. This metadata is stored at the - start of the device so is safer in many ways but could interfere with - boot loaded. The old default (0.90) is still available and fully - supported. - - - The default chunksize is now 512K rather than 64K. This seems more - appropriate for modern devices. - - - The default bitmap chunksize for internal bitmaps is now at least - 64Meg as fine grained bitmaps tend to impact performance more for - little extra gain. - -This release is believed to be stable and you should feel free to -upgrade to 3.1.1. - -NeilBrown 19th November 2009 diff --git a/ANNOUNCE-3.1.2 b/ANNOUNCE-3.1.2 deleted file mode 100644 index 321b8bef4fae..000000000000 --- a/ANNOUNCE-3.1.2 +++ /dev/null @@ -1,46 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.1.2 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.1.2 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - -This is a bugfix/stability release over 3.1.1. - -Significant changes are: - - The default metadata has change again (sorry about that). - It is now v1.2 and will hopefully stay that way. It turned - out there with boot-block issues with v1.1 which make it - unsuitable for a default, though in many cases it is still - suitable to use. - - Stopping a container is not permitted when members are still - active - - Add 'homehost' to the valid words for the "AUTO" config file - line. When followed by "-all", this causes mdadm to - auto-assemble any array belonging to this host, but not - auto-assemble anything else. - - Fix some bugs with "--grow --chunksize=" for changing chunksize. - - VAR_RUN can be easily changed at compile time just like ALT_RUN. - This gives distros more flexability in how to manage the - pid and sock files that mdmon needs. - - Various mdmon fixes - - Alway make bitmap 4K-aligned if at all possible. - - If mdadm.conf lists arrays which have inter-dependencies, - the previously had to be listed in the "right" order. Now - any order should work. - - Fix --force assembly of v1.x arrays which are in the process - of recovering. - - Add section on 'scrubbing' to 'md' man page. - - Various command-line-option parsing improvements. - - ... and lots of other bug fixes. - - -This release is believed to be stable and you should feel free to -upgrade to 3.1.2 - -NeilBrown 10th March 2010 diff --git a/ANNOUNCE-3.1.3 b/ANNOUNCE-3.1.3 deleted file mode 100644 index 95b2b6c1cf6d..000000000000 --- a/ANNOUNCE-3.1.3 +++ /dev/null @@ -1,46 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.1.3 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.1.3 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - -This is a bugfix/stability release over 3.1.2 - -Significant changes are: - - mapfile now lives in a fixed location which default to - /dev/.mdadm/map but can be changed at compile time. This - location is choses and most distros provide it during early - boot and preserve it through. As long a /dev exists and is - writable, /dev/.mdadm will be created. - Other files file communication with mdmon live here too. - This fixes a bug reported by Debian and Gentoo users where - udev would spin in early-boot. - - IMSM and DDF metadata will not be recognised on partitions - as they should only be used on whole-disks. - - Various overflows causes by 2G drives have been addressed. - - A subarray of an IMSM contain can now be killed with - --kill-subarray. Also subarrays can be renamed with - --update-subarray - - -If (or --incremental --fail) can be used from udev to - fail and remove from all arrays a device which has been - unplugged from the system. i.e. hot-unplug-support. - - "mdadm /dev/mdX --re-add missing" will look for any device - that looks like it should be a member of /dev/mdX but isn't - and will automatically --re-add it - - Now compile with -Wextra to get extra warnings. - - Lots of minor bug fixes, documentation improvements, etcc - -This release is believed to be stable and you should feel free to -upgrade to 3.1.3 - -It is expected that the next release will be 3.2 with a number of new -features. 3.1.4 will only happen if important bugs show up before 3.2 -is stable. - -NeilBrown 6th August 2010 diff --git a/ANNOUNCE-3.1.4 b/ANNOUNCE-3.1.4 deleted file mode 100644 index c157a36aa636..000000000000 --- a/ANNOUNCE-3.1.4 +++ /dev/null @@ -1,37 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.1.4 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.1.4 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - -This is a bugfix/stability release over 3.1.3. -3.1.3 had a couple of embarrasing regressions and a couple of other -issues surfaces which had easy fixes so I decided to make a 3.1.4 -release after all. - -Two fixes related to configs that aren't using udev: - - Don't remove md devices which 'standard' names on --stop - - Allow dev_open to work on read-only /dev -And fixed regressions: - - Allow --incremental to add spares to an array - - Accept --no-degraded as a deprecated option rather than - throwing an error - - Return correct success status when --incrmental assembling - a container which does not yet have enough devices. - - Don't link mdadm with pthreads, only mdmon needs it. - - Fix compiler warning due to bad use of snprintf - - Fix spare migration - -This release is believed to be stable and you should feel free to -upgrade to 3.1.4 - -It is expected that the next release will be 3.2 with a number of new -features. - -NeilBrown 31st August 2010 diff --git a/ANNOUNCE-3.1.5 b/ANNOUNCE-3.1.5 deleted file mode 100644 index baa1f9218b43..000000000000 --- a/ANNOUNCE-3.1.5 +++ /dev/null @@ -1,42 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.1.5 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.1.5 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git?p=mdadm - -This is a bugfix/stability release over 3.1.4. It contains all the -important bugfixes found while working on 3.2 and 3.2.1. It will be -the last 3.1.x release - 3.2.1 is expected to be released in a few days. - -Changes include: - - Fixes for v1.x metadata on big-endian machines. - - man page improvements - - Improve '--detail --export' when run on partitions of an md array. - - Fix regression with removing 'failed' or 'detached' devices. - - Fixes for "--assemble --force" in various unusual cases. - - Allow '-Y' to mean --export. This was documented but not implemented. - - Various fixed for handling 'ddf' metadata. This is now more reliable - but could benefit from more interoperability testing. - - Correctly list subarrays of a container in "--detail" output. - - Improve checks on whether the requested number of devices is supported - by the metadata - both for --create and --grow. - - Don't remove partitions from a device that is being included in an - array until we are fully committed to including it. - - Allow "--assemble --update=no-bitmap" so an array with a corrupt - bitmap can still be assembled. - - Don't allow --add to succeed if it looks like a "--re-add" is probably - wanted, but cannot succeed. This avoids inadvertently turning - devices into spares when an array is failed. - -This release is believed to be stable and you should feel free to -upgrade to 3.1.5 - - -NeilBrown 23rd March 2011 - diff --git a/ANNOUNCE-3.2 b/ANNOUNCE-3.2 deleted file mode 100644 index 9e282bc68e51..000000000000 --- a/ANNOUNCE-3.2 +++ /dev/null @@ -1,77 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.2 - A tool for managing Soft RAID under Linux (DEVEL ONLY) - -I am pleased to announce the availability of - mdadm version 3.2 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm devel-3.2 - http://neil.brown.name/git?p=mdadm - -This is a "Developers only" release. Please don't consider using it -or making it available to others without reading the following. - - -By far the most significant change in this release related to the -management of reshaping arrays. This code has been substantially -re-written so that it can work with 'externally managed metadata' - -Intel's IMSM in particular. We now support level migration and -OnLine Capacity Expansion on these arrays. - -However, while the code largely works it has not been tested -exhaustively so there are likely to be problems. As the reshape code -for native metadata arrays was changed as part of this rewrite these -problems could also result in regressions for reshape of native -metadata. - -It is partly to encourage greater testing that this release is being -made. Any reports of problem - particular reproducible recipes for -triggering the problems - will be gratefully received. - -It is hopped that a "3.2.1" release will be available in early March -which will be a bugfix release over this and can be considered -suitable for general use. - -Other changes of note: - - - Policy framework. - Various policy statements can be made in the mdadm.conf to guide - the behaviour of mdadm, particular with regards to how new devices - are treated by "mdadm -I". - Depending on the 'action' associated with a device (identified by - its 'path') such need devices can be automatically re-added to and - existing array that they previously fell out off, or automatically - added as a spare if they appear to contain no data. - - - mdadm now has a limited understanding of partition tables. This - allows the policy framework to make decisions about partitioned - devices as well. - - - --incremental --remove can be told what --path the device was on, - and this info will be recorded so that another device appearing at - the same physical location can be preferentially added to the same - array (provides the spare-same-slot action policy applied to the - path). - - - A new flags "--invalid-backup" flag is available in --assemble - mode. This can be used to re-assemble an array which was stopping - in the middle of a reshape, and for which the 'backup file' is no - longer available or is corrupted. The array may have some - corruption in it at the point where reshape was up to, but at least - the rest of the array will become available. - - - - Various internal restructuring - more is needed. - - -Any feed back and bug reports are always welcomed at: - linux-raid@vger.kernel.org - -And please: don't use this in production - particularly not the ---grow functionality. - -NeilBrown 1st February 2011 - - diff --git a/ANNOUNCE-3.2.1 b/ANNOUNCE-3.2.1 deleted file mode 100644 index 0e7826ca25f5..000000000000 --- a/ANNOUNCE-3.2.1 +++ /dev/null @@ -1,75 +0,0 @@ - - -I am pleased to announce the availability of - mdadm version 3.2.1 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git/mdadm - -Many of the changes in this release are of internal interest only, -restructuring and refactoring code and so forth. - -Most of the bugs found and fixed during development for 3.2.1 have been -back-ported for the recently-release 3.1.5 so this release primarily -provides a few new features over 3.1.5. - -They include: - - policy framework - Policy can be expressed for moving spare devices between arrays, and - for how to handle hot-plugged devices. This policy can be different - for devices plugged in to different controllers etc. - This, for example, allows a configuration where when a device is plugged - in it is immediately included in an md array as a hot spare and - possibly starts recovery immediately if an array is degraded. - - - some understanding of mbr and gpt paritition tables - This is primarly to support the new hot-plug support. If a - device is plugged in and policy suggests it should have a partition table, - the partition table will be copied from a suitably similar device, and - then the partitions will hot-plug and can then be added to md arrays. - - - "--incremental --remove" can remember where a device was removed from - so if a device gets plugged back in the same place, special policy applies - to it, allowing it to be included in an array even if a general hotplug - will not be included. - - - enhanced reshape options, including growing a RAID0 by converting to RAID4, - restriping, and converting back. Also convertions between RAID0 and - RAID10 and between RAID1 and RAID10 are possible (with a suitably recent - kernel). - - - spare migration for IMSM arrays. - Spare migration can now work across 'containers' using non-native metadata - and specifically Intel's IMSM arrays support spare migrations. - - - OLCE and level migration for Intel IMSM arrays. - OnLine Capacity Expansion and level migration (e.g. RAID0 -> RAID5) is - supported for Intel Matrix Storage Manager arrays. - This support is currently 'experimental' for technical reasons. It can - be enabled with "export MDADM_EXPERIMENTAL=1" - - - avoid including wayward devices - If you split a RAID1, mount the two halves as two separate degraded RAID1s, - and then later bring the two back together, it is possible that the md - metadata won't properly show that one must over-ride the other. - mdadm now does extra checking to detect this possibilty and avoid - potentially corrupting data. - - - remove any possible confusion between similar options. - e.g. --brief and --bitmap were mapped to 'b' and mdadm wouldn't - notice if one was used where the other was expected. - - - allow K,M,G suffixes on chunk sizes - - -While mdadm-3.2.1 is considered to be reasonably stable, you should -only use it if you want to try out the new features, or if you -generally like to be on the bleeding edge. If the new features are not -important to you, then 3.1.5 is probably the appropriate version to be using -until 3.2.2 comes out. - -NeilBrown 28th March 2011 diff --git a/ANNOUNCE-3.2.2 b/ANNOUNCE-3.2.2 deleted file mode 100644 index b70d18b95bff..000000000000 --- a/ANNOUNCE-3.2.2 +++ /dev/null @@ -1,36 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.2.2 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.2.2 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git/mdadm - -This release is largely a stablising release for the 3.2 series. -Many of the changes just fix bugs introduces in 3.2 or 3.2.1. - -There are some new features. They are: - - reshaping IMSM (Intel metadata) arrays is no longer 'experimental', - it should work properly and be largely compatible with IMSM drivers in - other platforms. - - --assume-clean can be used with --grow --size to avoid resyncing the - new part of the array. This is only support with very new kernels. - - RAID0 arrays can have chunksize which is not a power of 2. This has been - supported in the kernel for a while but is only now supprted by - mdadm. - - - A new tool 'raid6check' is available which can check a RAID6 array, - or part of it, and report which device is most inconsistent with the - others if any stripe is inconsistent. This is still under development - and does not have a man page yet. If anyone tries it out and has any - questions or experience to report, they would be most welcome on - linux-raid@vger.kernel.org. - -Future releases in the 3.2 series will only be made if bugfixes are needed. -The next release to add features is expected to be 3.3. - -NeilBrown 17th June 2011 diff --git a/ANNOUNCE-3.2.3 b/ANNOUNCE-3.2.3 deleted file mode 100644 index 8a8dba4661cd..000000000000 --- a/ANNOUNCE-3.2.3 +++ /dev/null @@ -1,24 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.2.3 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.2.3 - -It is available at the usual places: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://neil.brown.name/mdadm - http://neil.brown.name/git/mdadm - -This release is largely a bugfix release for the 3.2 series with many -minor fixes with little or no impact. - -The largest single area of change is support for reshape of Intel -IMSM arrays (OnLine Capacity Explansion and Level Migtration). -Among other fixes, this now has a better chance of surviving if a -device fails during reshape. - -Upgrading is recommended - particularly if you use mdadm for IMSM -arrays - but not essential. - -NeilBrown 23rd December 2011 diff --git a/ANNOUNCE-3.2.4 b/ANNOUNCE-3.2.4 deleted file mode 100644 index e321678604c0..000000000000 --- a/ANNOUNCE-3.2.4 +++ /dev/null @@ -1,144 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.2.4 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.2.4 - -It is available at the usual places, now including github: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://neil.brown.name/git/mdadm - -This release is largely a bugfix release for the 3.2 series with many -minor fixes with little or no impact. - -"--oneline" log of changes is below. Some notable ones are: - - - --offroot argument to improve interactions between mdmon and initrd - - --prefer argument to select which /dev names to display in some - circumstances. - - relax restructions on when "--add" will be allowed - - Fix bug with adding write-intent-bitmap to active array - - Now defaults to "/run/mdadm" for storing run-time files. - -Upgrading is encouraged. - -The next mdadm release is expected to be 3.3 with a number of new -features. - -NeilBrown 9th May 2012 - -77b3ac8 monitor: make return from read_and_act more symbolic. -68226a8 monitor: ensure we retry soon when 'remove' fails. -8453f8d fix: Monitor sometimes crashes -90fa1a2 Work around gcc-4.7's strict aliasing checks -0c4304c fix: container creation with --incremental used. -5d1c7cd FIX: External metadata sometimes is not updated -3c20f98 FIX: mdmon check in reshape_container() can cause a problem -59ab9f5 FIX: Typo error in fprint command -9587c37 imsm: load_super_imsm_all function refactoring -ec50f7b imsm: load_imsm_super_all supports loading metadata from the device list -ca9de18 imsm: validate the number of imsm volumes per controller -30602f5 imsm: display fd in error trace when when store_imsm_mpb failes -eb155f6 mdmon: Use getopt_long() to parse command line options -08ca2ad Add --offroot argument to mdadm -da82751 Add --offroot argument to mdmon -a0963a8 Spawn mdmon with --offroot if mdadm was launched with --offroot -f878b24 imsm: fix, the second array need to have the whole available space on devices -d597705 getinfo_super1: Use MaxSector in place of sb->size -6ef8905 super1: make aread/awrite always use an aligned buffer. -de5a472 Remove avail_disks arg from 'enough'. -da8fe5a Assemble: fix --force assemble during reshape. -b10c663 config: fix handing of 'homehost' in AUTO line. -92d49ec FIX: NULL pointer to strdup() can be passed -d2bde6d imsm: FIX: No new missing disks are allowed during general migration -111e9fd FIX: Array is not run when expansion disks are added -bf5cf7c imsm: FIX: imsm_get_allowed_degradation() doesn't count degradation for raid1 -50927b1 Fix: Sometimes mdmon throws core dump during reshape -78340e2 Flush mdmon before next reshape step during container operation -e174219 imsm: FIX: Chunk size migration problem -f93346e FIX: use md position to reshape restart -6a75c8c imsm: FIX: use md position to reshape restart -51d83f5 imsm: FIX: Clear migration record when migration switches to next volume. -e1dd332 FIX: restart reshape when reshape process is stopped just between 2 reshapes -1ca90aa FIX: Do not try to (continue) reshape using inactive array -9f1b0f0 config: conf_match should ignore devname when not set. -d669228 Use posix_memalign() for memory used to write bitmaps -178950e FIX: Changes in '0' case for reshape position verification -9200d41 avoid double-free upon "old buggy kernel" sysfs_read failure -4011421 Print error message if failing to write super for 1.x metadata -0011874 Use MDMON_DIR for pid files created in Monitor.c -56d1885 Assemble: don't use O_EXCL until we have checked device content. -b720636 Assemble: support assembling of a RAID0 being reshaped. -c69ffac Manage: allow --re-add to failed array. -52f07f5 Reset bad flag on map update -911cead super1: support superblocks up to 4K. -ad6db3c Create: reduce the verbosity of 'default_layout'. -b2bfdfa super1.c don't keep recalculating bitmap pointer -4122675 Define and use SUPER1_SIZE for allocations -1afa930 init_super1() memset full buffer allocated for superblock -2de0b8a match_metadata_desc1(): Use calloc instead of malloc+memset -3c0bcd4 Use 4K buffer alignment for superblock allocations -308340a Use struct align_fd to cache fd's block size for aligned reads/writes -65ed615 match_metadata_desc0(): Use calloc instead of malloc+memset -de89706 Generalize ROUND_UP() macro and introduce matching ROUND_UP_PTR() -0a2f189 super1.c: use ROUND_UP/ROUND_UP_PTR -654a381 super-intel.c: Use ROUND_UP() instead of manually coding it -42d5dfd __write_init_super_ddf(): Use posix_memalign() instead of static aligned buffer -d4633e0 Examine: fix array size calculation for RAID10. -e62b778 Assemble: improve verbose logging when including old devices. -0073a6e Remove possible crash during RAID6 -> RAID5 reshape. -69fe207 Incremental: fix adding devices with --incremental -bcbb311 Manage: replace 'return 1' with 'goto abort'. -9f58469 Manage: freeze recovery while adding multiple devices. -ae6c05a Create: round off size for RAID1 arrays. -5ca3a90 Grow: print useful error when converting RAID1->RAID5 will fail. -c07d640 Fix tests/05r1-re-add-nosupper -2d762ad Fix the new ROUND_UP macro. -fd324b0 sysfs: fixed sysfs_freeze_array array to work properly with Manage_subdevs. -5551b11 imsm: avoid overflows for disks over 1TB -97f81ee clear hi bits if not used after loading metadata from disk -e03640b simplify calculating array_blocks -29cd082 show 2TB volumes/disks support in --detail-platform -2cc699a check volume size in validate_geometry_imsm_orom -9126b9a check that no disk over 2TB is used to create container when no support -027c374 imsm: set 2tb disk attribute for spare -3556c2f Fix typo: wan -> want -15632a9 parse_size: distinguish between 0 and error. -fbdef49 Bitmap_offset is a signed number -508a7f1 super1: leave more space in front of data by default. -40110b9 Fix two typos in fprintf messages -342460c mdadm man page: fix typo -0e7f69a imsm: display maximum volumes per controller and array -36fd8cc imsm: FIX: Update function imsm_num_data_members() for Raid1/10 -7abc987 imsm: FIX: Add volume size expand support to imsm_analyze_change() -f3871fd imsm: Add new metadata update for volume size expansion -54397ed imsm: Execute size change for external metatdata -016e00f FIX: Support metadata changes rollback -fbf3d20 imsm: FIX: Support metadata changes rollback -44f6f18 FIX: Extend size of raid0 array -7e7e9a4 FIX: Respect metadata size limitations -65a9798 FIX: Detect error and rollback metadata -13bcac9 imsm: Add function imsm_get_free_size() -b130333 imsm: Support setting max size for size change operation -c41e00b imsm: FIX: Component size alignment check -58d26a2 FIX: Size change is possible as standalone change only -4aecb54 FIX: Assembled second array is in read only state during reshape -ae2416e FIX: resolve make everything compilation error -480f356 Raid limit of 1024 when scanning for devices. -c2ecf5f Add --prefer option for --detail and --monitor -0a99975 Relax restrictions on when --add is permitted. -7ce0570 imsm: fix: rebuild does not continue after reboot -b51702b fix: correct extending size of raid0 array -34a1395 Fix sign extension of bitmap_offset in super1.c -012a864 Introduce sysfs_set_num_signed() and use it to set bitmap/offset -5d7b407 imsm: fix: thunderdome may drop 2tb attribute -5ffdc2d Update test for "is udev active". -96fd06e Adjust to new standard of /run -974e039 test: don't worry too much about array size. -b0a658f Grow: failing the set the per-device size is not an error. -36614e9 super-intel.c: Don't try to close negative fd -562aa10 super-intel.c: Fix resource leak from opendir() - diff --git a/ANNOUNCE-3.2.5 b/ANNOUNCE-3.2.5 deleted file mode 100644 index 396da12a6f61..000000000000 --- a/ANNOUNCE-3.2.5 +++ /dev/null @@ -1,31 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.2.5 - A tool for managing Soft RAID under Linux - -I am somewhat disappointed to have to announce the availability of - mdadm version 3.2.5 - -It is available at the usual places, now including github: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://neil.brown.name/git/mdadm - -This release primarily fixes a serious regression in 3.2.4. -This regression does *not* cause any risk to data. It simply -means that adding a device with "--add" would sometime fail -when it should not. - -The fix also includes a couple of minor fixes such as making -the "--layout=preserve" option to "--grow" work again. - -A reminder that the default location for runtime files is now -"/run/mdadm". If you compile this for a distro that does not -have "/run", you will need to compile with an alternate setting for -MAP_DIR. e.g. - make MAP_DIR=/var/run/mdadm -or - make MAP_DIR=/dev/.mdadm - -NeilBrown 18th May 2012 - diff --git a/ANNOUNCE-3.2.6 b/ANNOUNCE-3.2.6 deleted file mode 100644 index f5cfd4920576..000000000000 --- a/ANNOUNCE-3.2.6 +++ /dev/null @@ -1,57 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.2.6 - A tool for managing Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.2.6 - -It is available at the usual places, now including github: - countrycode=xx. - http://www.${countrycode}kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://neil.brown.name/git/mdadm - -This is a stablity release which adds a number of bugfixs to 3.2.5. -There are no real stand-out fixes, just lots of little bits and pieces. - -Below is the "git log --oneline --reverse" list of changes since -3.2.5. - -NeilBrown 25th October 2012 - -b7e05d2 udev-rules: prevent systemd from mount devices before they are ready. -0d478e2 mdadm: Fix Segmentation fault. -42f0ca1 imsm: fix: correct checking volume's degradation -fcf2195 Monitor: fix inconsistencies in values for ->percent -5f862fb Monitor: Report NewArray when an array the disappeared, reappears. -6f51b1c Monitor: fix reporting for Fail vs FailSpare etc. -68ad53b mdmon: fix arg parsing. -517f135 Assemble: don't leak memory with fdlist. -090900c udev-rules: prevent systemd from mount devices before they are ready. -446e000 sha1.h: remove ansidecl.h header inclusion -ec894f5 Manage: zero metadata before adding to 'external' array. -3a84db5 ddf: allow a non-spare to be used to recovery a missing device. -c5d61ca ddf: hack to fix container recognition. -23084aa mdmon: fix arg processing for -a -c4e96a3 mdmon: allow --takeover when original was started with --offroot -80841df find_free_devnum: avoid auto-using names in /etc/mdadm.conf -c5c56d6 mapfile: fix mapfile rebuild for containers -aec89f6 fix segfaults in Detail() -2117ad1 Fix 'enough' function for RAID10. -0bc300d Use --offroot flag when assembling md arrays via --incrmental -ac78f24 Grow: make warning about old metadata more explicit. -14026ab Replace sha1.h with slightly older version. -6f6809f Add zlib license to crc32.c -5267ba0 Handles spaces in array names better. -c51f288 imsm: allow --assume-clean to work. -acf7076 Grow: allow --grow --continue to work for native metadata. -335d2a6 Grow: fix a couple of typos with --assume-clean usage -9ff1427 Fix open_container -3713633 mdadm: super0: do not override uuid with homehost -31bff58 Trivial bugfix and spelling fixes. -e1e539f Detail: don't report a faulty device as 'spare' or 'rebuilding'. -22a6461 super0: allow creation of array on 2TB+ devices. -a5d47a2 Create new md devices consistently -eb48676 Monitor: don't complain about non-monitorable arrays in mdadm.conf -ecdf2d7 Query: don't be confused by partition tables. -f7b75c1 Query: allow member of non-0.90 arrays to be better reported. diff --git a/ANNOUNCE-3.3 b/ANNOUNCE-3.3 deleted file mode 100644 index f770aa13137f..000000000000 --- a/ANNOUNCE-3.3 +++ /dev/null @@ -1,63 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.3 - A tools for managing md Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.3 - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://git.neil.brown.name/git/mdadm - -This is a major new release so don't be too surprised if there are a -few issues. If I hear about them they will be fixed in 3.3.1. -git log reports nearly 500 changes since 3.2.6 so I won't list them -all. - -Some highlights are: - -- Some array reshapes can proceed without needing backup file. - This is done by changing the 'data_offset' so we never need to write - any data back over where it was before. If there is no "head space" - or "tail space" to allow data_offset to change, the old mechanism - with a backup file can still be used. -- RAID10 arrays can be reshaped to change the number of devices, - change the chunk size, or change the layout between 'near' - and 'offset'. - This will always change data_offset, and will fail if there is no - room for data_offset to be moved. -- "--assemble --update=metadata" can convert a 0.90 array to a 1.0 array. -- bad-block-logs are supported (but not heavily tested yet) -- "--assemble --update=revert-reshape" can be used to undo a reshape - that has just been started but isn't really wanted. This is very - new and while it passes basic tests it cannot be guaranteed. -- improved locking between --incremental and --assemble -- uses systemd to run "mdmon" if systemd is configured to do that. -- kernel names of md devices can be non-numeric. e.g. "md_home" rather than - "md0". This will probably confuse lots of other tools, so you need to - echo CREATE names=yes >> /etc/mdadm.conf - or the feature will not be used. (you also need a reasonably new kernel). -- "--stop" can be given a kernel name instead of a device name. i.e - mdadm --stop md4 - will work even if /dev/md4 doesn't exist. -- "--detail --export" has some information about the devices in the array -- --dump and --restore can be used to backup and restore the metadata on an - array. -- Hot-replace is supported with - mdadm /dev/mdX --replace /dev/foo - and - mdadm /dev/mdX --replace /dev/foo --with /dev/bar -- Config file can be a directory in which case all "*.conf" files are - read in lexical order. - Default is to read /etc/mdadm.conf and then /etc/mdadm.conf.d - Thus - echo CREATE name=yes > /etc/mdadm.conf.d/names.conf - will also enable the use of named md devices. - -- Lots of improvements to DDF support including adding support for - RAID10 (thanks Martin Wilck). - -and lots of bugfixes and other little changes. - -NeilBrown 3rd September 2013 diff --git a/ANNOUNCE-3.3.1 b/ANNOUNCE-3.3.1 deleted file mode 100644 index 7d5e666ed1b5..000000000000 --- a/ANNOUNCE-3.3.1 +++ /dev/null @@ -1,23 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.3.1 - A tool for managing md Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.3.1 - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://git.neil.brown.name/git/mdadm.git - -The main changes are: - - lots of work on "DDF" support. Hopefully it will be more stable - now. Bug reports are always welcome. - - improved interactions with 'systemd'. Where possible, background - tasks are run from systemd (if it is present) rather then forking - disassociationg from the session. This is important because udev - doesn't really let you disassociate. - -though there are a number of other little bug fixes too. - -NeilBrown 5th June 2014 diff --git a/ANNOUNCE-3.3.2 b/ANNOUNCE-3.3.2 deleted file mode 100644 index 6b549611ef13..000000000000 --- a/ANNOUNCE-3.3.2 +++ /dev/null @@ -1,16 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.3.2 - A tool for managing md Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.3.2 - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://git.neil.brown.name/git/mdadm.git - -Changes since 3.3.1 are mostly little bugfixes and some man-page -updates. - -NeilBrown 21st August 2014 diff --git a/ANNOUNCE-3.3.3 b/ANNOUNCE-3.3.3 deleted file mode 100644 index ac1b2173b5c0..000000000000 --- a/ANNOUNCE-3.3.3 +++ /dev/null @@ -1,18 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.3.3 - A tool for managing md Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.3.3 - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://git.neil.brown.name/git/mdadm.git - -The 100 changes since 3.3.3 are mostly little bugfixes and some improvements -to the selftests. -raid6check now handle all RAID6 layouts including DDF correctly. -See git log for the rest. - -NeilBrown 24th July 2015 diff --git a/ANNOUNCE-3.3.4 b/ANNOUNCE-3.3.4 deleted file mode 100644 index 52b94562af51..000000000000 --- a/ANNOUNCE-3.3.4 +++ /dev/null @@ -1,37 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.3.4 - A tool for managing md Soft RAID under Linux - -I am somewhat disappointed to have to announce the availability of - mdadm version 3.3.4 - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://git.neil.brown.name/git/mdadm.git - -In mdadm-3.3 a change was made to how IMSM (Intel Matrix Storage -Manager) metadata was handled. Previously an IMSM array would only -be assembled if it was attached to an IMSM controller. - -In 3.3 this was relaxed as there are circumstances where the -controller is not properly detected. Unfortunately this has negative -consequences which have only just come to light. - -If you have an IMSM RAID1 configured and then disable RAID in the -BIOS, the metadata will remain on the devices. If you then install -some other OS on one device and then install Linux on the other, Linux -might eventually start noticing the IMSM metadata (depending a bit on whether -mdadm is included in the initramfs) and might start up the RAID1. This could -copy one device over the other, thus trashing one of the installations. - -Not good. - -So with this release IMSM arrays will only be assembled if attached to -an IMSM controller, or if "--force" is given to --assemble, or if the -environment variable IMSM_NO_PLATFORM is set (used primarily for -testing). - -I strongly recommend upgrading to 3.3.4 if you are using 3.3 or later. - -NeilBrown 3rd August 2015. diff --git a/ANNOUNCE-3.4 b/ANNOUNCE-3.4 deleted file mode 100644 index 2689732de524..000000000000 --- a/ANNOUNCE-3.4 +++ /dev/null @@ -1,24 +0,0 @@ -Subject: ANNOUNCE: mdadm 3.4 - A tool for managing md Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 3.4 - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://github.com/neilbrown/mdadm - git://neil.brown.name/mdadm - http://git.neil.brown.name/git/mdadm - -The new second-level version number reflects significant new -functionality, particular support for journalled RAID5/6 and clustered -RAID1. This new support is probably still buggy. Please report bugs. - -There are also a number of fixes for Intel's IMSM metadata support, -and an assortment of minor bug fixes. - -I plan for this to be the last release of mdadm that I provide as I am -retiring from MD and mdadm maintenance. Jes Sorensen has volunteered -to oversee mdadm for the next while. Thanks Jes! - -NeilBrown 28th January 2016 diff --git a/ANNOUNCE-4.0 b/ANNOUNCE-4.0 deleted file mode 100644 index f79c5408c923..000000000000 --- a/ANNOUNCE-4.0 +++ /dev/null @@ -1,22 +0,0 @@ -Subject: ANNOUNCE: mdadm 4.0 - A tool for managing md Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 4.0 - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://git.kernel.org/pub/scm/utils/mdadm/mdadm.git - http://git.kernel.org/cgit/utils/mdadm/ - -The update in major version number primarily indicates this is a -release by it's new maintainer. In addition it contains a large number -of fixes in particular for IMSM RAID and clustered RAID support. In -addition this release includes support for IMSM 4k sector drives, -failfast and better documentation for journaled RAID. - -This is my first release of mdadm. Please thank Neil Brown for his -previous work as maintainer and blame me for all the bugs I caused -since taking over. - -Jes Sorensen, 2017-01-09 diff --git a/ANNOUNCE-4.1 b/ANNOUNCE-4.1 deleted file mode 100644 index a273b9a008ec..000000000000 --- a/ANNOUNCE-4.1 +++ /dev/null @@ -1,16 +0,0 @@ -Subject: ANNOUNCE: mdadm 4.1 - A tool for managing md Soft RAID under Linux - -I am pleased to announce the availability of - mdadm version 4.1 - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://git.kernel.org/pub/scm/utils/mdadm/mdadm.git - http://git.kernel.org/cgit/utils/mdadm/ - -The update constitutes more than one year of enhancements and bug fixes -including for IMSM RAID, Partial Parity Log, clustered RAID support, -improved testing, and gcc-8 support. - -Jes Sorensen, 2018-10-01 diff --git a/ANNOUNCE-4.2 b/ANNOUNCE-4.2 deleted file mode 100644 index 8b22d09ffef2..000000000000 --- a/ANNOUNCE-4.2 +++ /dev/null @@ -1,19 +0,0 @@ -Subject: ANNOUNCE: mdadm 4.2 - A tool for managing md Soft RAID under Linux - -I am pleased to finally announce the availability of mdadm-4.2. -get 4.2 out the door soon. - -It is available at the usual places: - http://www.kernel.org/pub/linux/utils/raid/mdadm/ -and via git at - git://git.kernel.org/pub/scm/utils/mdadm/mdadm.git - http://git.kernel.org/cgit/utils/mdadm/ - -The release includes more than two years of development and bugfixes, -so it is difficult to remember everything. Highlights include -enhancements and bug fixes including for IMSM RAID, Partial Parity -Log, clustered RAID support, improved testing, and gcc-9 support. - -Thank you everyone who contributed to this release! - -Jes Sorensen, 2021-12-30 diff --git a/CHANGELOG.md b/CHANGELOG.md new file mode 100644 index 000000000000..c1997ba759b8 --- /dev/null +++ b/CHANGELOG.md @@ -0,0 +1,368 @@ +# Release [mdadm-4.3](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-4.3) + +Features: +- **IMSM_NO_PLATFORM** boot parameter support from Neil Brown. +- **--write-zeros** option support by Logan Gunthorpe. +- **IMSM** monetization by VMD register from Mateusz Grzonka. +- RST SATA under VMD support from Kevin Friedberg. +- Strong name rules from Mariusz Tkaczyk. + +Fixes: +- Unify failed raid behavior from Coly Li. +- Rework of **--update** options from Mateusz Kusiak. +- **mdmon-initrd** service from Neil Brown. +- **IMSM** expand functionality rework from Mariusz Tkaczyk. +- Mdmonitor improvements from Mateusz Grzonka. +- Failed state verification from Mateusz Kusiak and Kinga Tanska. + +# Release [mdadm-4.2](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-4.2) + +The release includes more than two years of development and bugfixes, so it is difficult to +remember everything. Highlights include enhancements and bug fixes including for **IMSM** RAID, +Partial Parity Log, clustered RAID support, improved testing, and gcc-9 support. + +# Release [mdadm-4.1](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-4.1) + +The update constitutes more than one year of enhancements and bug fixes including for **IMSM** +RAID, Partial Parity Log, clustered RAID support, improved testing, and gcc-8 support. + +# Release [mdadm-4.0](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-4.0) + +The update in major version number primarily indicates this is a release by it's new maintainer. +In addition it contains a large number of fixes in particular for IMSM RAID and clustered RAID +support. In addition, this release includes support for IMSM 4k sector drives, failfast and better +documentation for journaled RAID. + +This is my first release of mdadm. Please thank Neil Brown for his previous work as maintainer and +blame me for all the bugs I caused since taking over. + +# Release [mdadm-3.4](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.4) + +- Support for journalled RAID5/6 and clustered RAID1. This new support is probably still buggy. + Please report bugs. + +- There are also a number of fixes for **IMSM** support and an assortment of minor bug fixes. + +- I plan for this to be the last release of mdadm that I provide as I am retiring from MD and mdadm + maintenance. Jes Sorensen has volunteered to oversee mdadm for the next while. Thanks Jes! + +# Release [mdadm-3.3.4](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.3.4) + +**I strongly recommend upgrading to 3.3.4 if you are using 3.3 or later with IMSM.** + +- **IMSM** metadata assemble fixes. + + In mdadm-3.3 a change was made to how **IMSM** metadata was handled. Previously an **IMSM** array + would only be assembled if it was attached to an **IMSM** controller. In 3.3 this was relaxed as + there are circumstances where the controller is not properly detected. Unfortunately, this has + negative consequences which have only just come to light. + + If you have an IMSM RAID1 configured and then disable RAID in the BIOS, the metadata will remain + on the devices. If you then install some other OS on one device and then install Linux on the + other, Linux might eventually start noticing the IMSM metadata (depending a bit on whether + mdadm is included in the initramfs) and might start up the RAID1. This could copy one device over + the other, thus trashing one of the installations. + + So, with this release IMSM arrays will only be assembled if attached to an **IMSM** controller, + or if **--force** is given to **--assemble**, or if the environment variable + **IMSM_NO_PLATFORM=1** is set (used primarily for testing). + +# Release [mdadm-3.3.3](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.3.3) + +- The 100 changes since 3.3.3 are mostly little bugfixes and some improvements to the self-tests. +- raid6check now handle all RAID6 layouts including **DDF** correctly. See git log for the rest. + +# Release [mdadm-3.3.2](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.3.2) + +- Little bugfixes and some man-page updates. + +# Release [mdadm-3.3.1](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.3.1) + +- lots of work on **DDF** support. +- Improved interactions with **systemd**. Where possible, background tasks are run from systemd + rather than forking. +- Number of other little bug fixes too. + +# Release [mdadm-3.3](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.3) + +- Some array reshapes can proceed without needing backup file. This is done by changing the + data_offset* so we never need to write any data back over where it was before. If there is no + 'head space' or 'tail space' to allow *data_offset* to change, the old mechanism with a backup + file can still be used. + +- RAID10 arrays can be reshaped to change the number of devices, change the chunk size, or change + the layout between *near* and *offset*. + This will always change *data_offset*, and will fail if there is no room for *data_offset* to be + moved. + +- **--assemble --update=metadata** can convert a **0.90** array to a **1.0** array. + +- **bad-block-logs** are supported (but not heavily tested yet). + +- **--assemble --update=revert-reshape** can be used to undo a reshape that has just been started + but isn't really wanted. This is very new and while it passes basic tests it cannot be + guaranteed. + +- improved locking between **--incremental** and **--assemble**. + +- uses systemd to run **mdmon** if systemd is configured to do that. +- kernel names of md devices can be non-numeric. e.g. "md_home" rather than + "md0". This will probably confuse lots of other tools, so you need to + **echo CREATE names=yes >> /etc/mdadm.conf** or the feature will not be used (you also need a + reasonably new kernel). + +- **--stop** can be given a kernel name instead of a device name. i.e. **mdadm --stop md4** will + work even if /dev/md4 doesn't exist. + +- **--detail --export** has some information about the devices in the array. +- **--dump** and **--restore** can be used to backup and restore the metadata on an array. +- Hot-replace is supported with **mdadm /dev/mdX --replace /dev/foo** and + **mdadm /dev/mdX --replace /dev/foo --with /dev/bar**. + +- Config file can be a directory in which case all "*.conf" files are read in lexical order. + Default is to read **/etc/mdadm.conf** and then **/etc/mdadm.conf.d**. Thus + **echo CREATE name=yes > /etc/mdadm.conf.d/names.conf** will also enable the use of named md + devices. + +- Lots of improvements to **DDF** support including adding support for RAID10 (thanks Martin Wilck). + +# Release [mdadm-3.2.6](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.2.6) + +- There are no real stand-out fixes, just lots of little bits and pieces. + +# Release [mdadm-3.2.5](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.2.5) + +- This release primarily fixes a serious regression in 3.2.4. This regression does *not* cause + any risk to data. It simply means that adding a device with **--add** would sometime fail + when it should not. +- The fix also includes a couple of minor fixes such as making the **--layout=preserve** option to + **--grow** work again. + +# Release [mdadm-3.2.4](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.2.4) + + - **--offroot** argument to improve interactions between mdmon and initrd. + - **--prefer** argument to select which */dev* names to display in some circumstances. + - relax restrictions on when **--add** will be allowed. + - Fix bug with adding write-intent-bitmap to active array. + - Now defaults to */run/mdadm* for storing run-time files. + +# Release [mdadm-3.2.3](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.2.3) + +- The largest single area of change is support for reshape of Intel IMSM arrays (OnLine Capacity + Expansion and Level Migration). +- Among other fixes, this now has a better chance of surviving if a device fails during reshape. + +# Release [mdadm-3.2.2](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.2.2) + +- reshaping IMSM (Intel metadata) arrays is no longer 'experimental', it should work properly and be + largely compatible with IMSM drivers in other platforms. +- **--assume-clean** can be used with **--grow --size** to avoid resyncing the new part of the + array. This is only support with very new kernels. +- RAID0 arrays can have chunksize which is not a power of 2. This has been supported in the kernel + for a while but is only now supported by mdadm. + +- A new tool **raid6check** is available, which can check a RAID6 array, or part of it and report + which device is most inconsistent with the others if any stripe is inconsistent. This is still + under development and does not have a man page yet. If anyone tries it out and has any questions + or experience to report, they would be most welcome on linux-raid@vger.kernel.org. + +# Release [mdadm-3.2.1](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.2.1) + +- Policy framework + + Policy can be expressed for moving spare devices between arrays, and for how to handle hot-plugged + devices. This policy can be different for devices plugged in to different controllers etc. This, + for example, allows a configuration where when a device is plugged in it is immediately included + in an md array as a hot spare and possibly starts recovery immediately if an array is degraded. + +- Some understanding of mbr and gpt paritition tables. This is primarily to support the new + hot-plug support. If a device is plugged in and policy suggests it should have a partition table, + the partition table will be copied from a suitably similar device, and then the partitions will + hot-plug and can then be added to md arrays. + +- **--incremental --remove** can remember where a device was removed from so if a device gets + plugged back in the same place, special policy applies to it, allowing it to be included in an + array even if a general hotplug will not be included. + +- Enhanced reshape options, including growing a RAID0 by converting to RAID4, restriping, and + converting back. Also convertions between RAID0 and RAID10 and between RAID1 and RAID10 are + possible (with a suitably recent kernel). + +- Spare migration for IMSM arrays. Spare migration can now work across 'containers' using + non-native metadata and specifically Intel's IMSM arrays support spare migrations. + +- OLCE and level migration for Intel IMSM arrays. OnLine Capacity Expansion and level migration + (e.g. RAID0 -> RAID5) is supported for Intel Matrix Storage Manager arrays. This support is + currently *experimental* for technical reasons. It can be enabled with + **export MDADM_EXPERIMENTAL=1**. + +- avoid including wayward devices. + + If you split a RAID1, mount the two halves as two separate degraded RAID1s, and then later bring + the two back together, it is possible that the md metadata won't properly show that one must + over-ride the other. Mdadm now does extra checking to detect this possibility and avoid + potentially corrupting data. + +- Remove any possible confusion between similar options. e.g. **--brief** and **--bitmap** were + mapped to 'b' and mdadm wouldn't notice if one was used where the other was expected. + +- Allow K,M,G suffixes on chunk sizes. + +# Release [mdadm-3.2](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.2) + +- By far the most significant change in this release related to the management of reshaping arrays. + This code has been substantially re-written so that it can work with **externally managed + metadata** -Intel's IMSM in particular. We now support level migration and OnLine Capacity + Expansion on these arrays. + +- Various policy statements can be made in the *mdadm.conf* to guide the behavior of mdadm, + particular with regards to how new devices are treated by **--incremental**. Depending on the + *action* associated with a device (identified by its *path*) such need devices can be + automatically re-added to and existing array that they previously fell out off, or automatically + added as a spare if they appear to contain no data. + +- mdadm now has a limited understanding of partition tables. This allows the policy framework to + make decisions about partitioned devices as well. + +- **--incremental --remove** can be told what **--path** the device was on, and this info will be + recorded so that another device appearing at the same physical location can be preferentially + added to the same array (provides the spare-same-slot action policy applied to the path). + +- A new flags **--invalid-backup** flag is available in **--assemble** mode. This can be used to + re-assemble an array which was stopping in the middle of a reshape, and for which the + *backup file* is no longer available or is corrupted. The array may have some corruption in it + at the point where reshape was up to, but at least the rest of the array will become available. + +- Policy framework. +- Various internal restructuring - more is needed. + +# Release [mdadm-3.1.5](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.1.5) + +- Fixes for **v1.x** metadata on big-endian machines. +- man page improvements. +- Improve **--detail --export** when run on partitions of an md array. +- Fix regression with removing *failed* or *detached* devices. +- Fixes for **--assemble --force** in various unusual cases. +- Allow **-Y** to mean **--export**. This was documented but not implemented. +- Various fixes for handling **ddf** metadata. This is now more reliable but could benefit from + more interoperability testing. +- Correctly list subarrays of a container in **--detail** output. +- Improve checks on whether the requested number of devices is supported by the metadata, both for + **--create** and **--grow**. +- Don't remove partitions from a device that is being included in an array until we are fully + committed to including it. +- Allow **--assemble --update=no-bitmap** so an array with a corrupt bitmap can still be assembled. +- Don't allow **--add** to succeed if it looks like a **--re-add** is probably wanted, but cannot + succeed. This avoids inadvertently turning devices into spares when an array is failed. + +# Release [mdadm-3.1.4](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.1.4) + +Two fixes related to configs that aren't using udev: +- Don't remove md devices which 'standard' names on **--stop**. +- Allow dev_open to work on read-only */dev*. + +And fixed regressions: +- Allow **--incremental** to add spares to an array. +- Accept **--no-degraded** as a deprecated option rather than throwing an error. +- Return correct success status when **--incremental** assembling a container which does not yet + have enough devices. +- Don't link mdadm with pthreads, only mdmon needs it. +- Fix compiler warning due to bad use of snprintf. + +# Release [mdadm-3.1.3](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.1.3) + +- mapfile now lives in a fixed location which default to */dev/.mdadm/map*, but can be changed at + compile time. This location is chosen and most distros provide it during early boot and preserve + it through. As long a */dev* exists and is writable, */dev/.mdadm* will be created. Other files + communication with mdmon live here too. This fixes a bug reported by Debian and Gentoo users where + udev would spin in early-boot. + +- IMSM and DDF metadata will not be recognized on partitions as they should only be used on + whole-disks. + +- Various overflows causes by 2G drives have been addressed. + +- A subarray of an IMSM contain can now be killed with **--kill-subarray**. Also, subarrays can be + renamed with **--update-subarray --update=name**. + +- **-If** (or **--incremental --fail**) can be used from udev to fail and remove from all arrays + a device which has been unplugged from the system i.e. hot-unplug-support. + +- **/dev/mdX --re-add missing** will look for any device that looks like it should be a member of + */dev/mdX* but isn't and will automatically **--re-add** it. + +- Now compile with *-Wextra* to get extra warnings. +- Lots of minor bug fixes, documentation improvements, etc. + +# Release [mdadm-3.1.2](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.1.2) + +- The default metadata has change again (sorry about that). It is now **v1.2** and will hopefully + stay that way. It turned out there with boot-block issues with **v1.1** which make it unsuitable + for a default, though in many cases it is still suitable to use. + +- Add *homehost* to the valid words for the **AUTO** config file line. When followed by *-all*, + this causes mdadm to auto-assemble any array belonging to this host, but not auto-assemble + anything else. + +- VAR_RUN can be easily changed at compile time just like ALT_RUN. This gives distros more + flexibility in how to manage the pid and sock files that mdmon needs. + +- If mdadm.conf lists arrays which have inter-dependencies, the previously had to be listed in the + "right" order. Now, any order should work. + +- Fix some bugs with **--grow --chunksize=**. +- Stopping a container is not permitted when members are still active. +- Various mdmon fixes. +- Alway make bitmap 4K-aligned if at all possible. +- Fix **--force** assembly of **v1.x** arrays which are in the process of recovering. +- Add section on 'scrubbing' to 'md' man page. +- Various command-line-option parsing improvements. +- ... and lots of other bug fixes. + +# Release [mdadm-3.1.1](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.1.1) + +- Multiple fixes for new **--grow** levels including fixes for serious data corruption + problems. +- Change default metadata to **v1.1**. +- Change default chunk size to 512K. +- Change default bitmap chunk size to 64MB. +- When **--re-add** is used, don't fall back to **--add** as this can destroy data. + +# Release [mdadm-3.1](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.1) + +- Support **--grow** to change the layout of RAID 4/5/6. +- Support **--grow** to change the chunk size of RAID 4/5/6. +- Support **--grow** to change level from RAID1 -> RAID5 -> RAID6 and back. +- Support **--grow** to reduce the number of devices in RAID 4/5/6. +- Support restart of these grow options which assembling an array which is partially grown. +- Assorted tests of this code, and of different RAID6 layouts. + +# Release [mdadm-3.0.3](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.0.3) + +- Improvements for creating arrays giving just a name, like *foo*, rather than the full + */dev/md/foo*. +- Improvements for assembling member arrays of containers. +- Improvements to test suite. +- Add option to change increment for *RebuildNN* messages reported by **--monitor**. +- Improvements to **mdmon** hand-over from initrd to final root. +- Handle merging of devices that have left an IMSM array and are being re-incorporated. +- Add missing space in **--detail --brief** output. + +# Release [mdadm-3.0.2](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.0.2) + +- Fix crash when **homehost** is not set, as often happens in early boot. + +# Release [mdadm-3.0.1](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.0.1) + +- Fix various segfaults. +- Fixed for **--examine** with containers. +- Lots of other little fixes. + +# Release [mdadm-3.0](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/log/?h=mdadm-3.0) + +- Support for **externally managed metadata**, specifically DDF and IMSM. +- Depend on udev to create entries in */dev*, rather than creating them ourselves. +- Remove **--auto-update-home-hosts**. +- New config file line **auto**. +- New *ignore* and *any* options for **homehost**. +- Numerous bug fixes and minor enhancements. diff --git a/ChangeLog b/ChangeLog deleted file mode 100644 index a3bf7007d839..000000000000 --- a/ChangeLog +++ /dev/null @@ -1,306 +0,0 @@ -Please see git logs for detailed change log. -This file just contains highlight. - -Changes Prior to release 3.3 -- Some array reshapes can proceed without needing backup file. - This is done by changing the 'data_offset' so we never need to write - any data back over where it was before. If there is no "head space" - or "tail space" to allow data_offset to change, the old mechanism - with a backup file can still be used. -- RAID10 arrays can be reshaped to change the number of devices, - change the chunk size, or change the layout between 'near' - and 'offset'. - This will always change data_offset, and will fail if there is no - room for data_offset to be moved. -- "--assemble --update=metadata" can convert a 0.90 array to a 1.0 array. -- bad-block-logs are supported (but not heavily tested yet) -- "--assemble --update=revert-reshape" can be used to undo a reshape - that has just been started but isn't really wanted. This is very - new and while it passes basic tests it cannot be guaranteed. -- improved locking between --incremental and --assemble -- uses systemd to run "mdmon" if systemd is configured to do that. -- kernel names of md devices can be non-numeric. e.g. "md_home" rather than - "md0". This will probably confuse lots of other tools, so you need to - echo CREATE names=yes >> /etc/mdadm.conf - or the feature will not be used. (you also need a reasonably new kernel). -- "--stop" can be given a kernel name instead of a device name. i.e - mdadm --stop md4 - will work even if /dev/md4 doesn't exist. -- "--detail --export" has some information about the devices in the array -- --dump and --restore can be used to backup and restore the metadata on an - array. -- Hot-replace is supported with - mdadm /dev/mdX --replace /dev/foo - and - mdadm /dev/mdX --replace /dev/foo --with /dev/bar -- Config file can be a directory in which case all "*.conf" files are - read in lexical order. - Default is to read /etc/mdadm.conf and then /etc/mdadm.conf.d - Thus - echo CREATE name=yes > /etc/mdadm.conf.d/names.conf - will also enable the use of named md devices. - -- Lots of improvements to DDF support including adding support for - RAID10 (thanks Martin Wilck). - -Changes Prior to release 3.2.6 - - There are no real stand-out fixes, just lots of little bits and pieces. - -Changes Prior to release 3.2.5 - - This release primarily fixes a serious regression in 3.2.4. - This regression does *not* cause any risk to data. It simply - means that adding a device with "--add" would sometime fail - when it should not. - - - The fix also includes a couple of minor fixes such as making - the "--layout=preserve" option to "--grow" work again. - - -Changes Prior to release 3.2.4 -"--oneline" log of changes is below. Some notable ones are: - - - --offroot argument to improve interactions between mdmon and initrd - - --prefer argument to select which /dev names to display in some - circumstances. - - relax restructions on when "--add" will be allowed - - Fix bug with adding write-intent-bitmap to active array - - Now defaults to "/run/mdadm" for storing run-time files. - -Changes Prior to release 3.2.3 - - The largest single area of change is support for reshape of Intel - IMSM arrays (OnLine Capacity Explansion and Level Migration). - - Among other fixes, this now has a better chance of surviving if a - device fails during reshape. - -Changes Prior to release 3.2.2 - - reshaping IMSM (Intel metadata) arrays is no longer 'experimental', - it should work properly and be largely compatible with IMSM drivers in - other platforms. - - --assume-clean can be used with --grow --size to avoid resyncing the - new part of the array. This is only support with very new kernels. - - RAID0 arrays can have chunksize which is not a power of 2. This has been - supported in the kernel for a while but is only now supprted by - mdadm. - - - A new tool 'raid6check' is available which can check a RAID6 array, - or part of it, and report which device is most inconsistent with the - others if any stripe is inconsistent. This is still under development - and does not have a man page yet. If anyone tries it out and has any - questions or experience to report, they would be most welcome on - linux-raid@vger.kernel.org. - -Changes Prior to release 3.2.1 - - policy framework - Policy can be expressed for moving spare devices between arrays, and - for how to handle hot-plugged devices. This policy can be different - for devices plugged in to different controllers etc. - This, for example, allows a configuration where when a device is plugged - in it is immediately included in an md array as a hot spare and - possibly starts recovery immediately if an array is degraded. - - - some understanding of mbr and gpt paritition tables - This is primarly to support the new hot-plug support. If a - device is plugged in and policy suggests it should have a partition table, - the partition table will be copied from a suitably similar device, and - then the partitions will hot-plug and can then be added to md arrays. - - - "--incremental --remove" can remember where a device was removed from - so if a device gets plugged back in the same place, special policy applies - to it, allowing it to be included in an array even if a general hotplug - will not be included. - - - enhanced reshape options, including growing a RAID0 by converting to RAID4, - restriping, and converting back. Also convertions between RAID0 and - RAID10 and between RAID1 and RAID10 are possible (with a suitably recent - kernel). - - - spare migration for IMSM arrays. - Spare migration can now work across 'containers' using non-native metadata - and specifically Intel's IMSM arrays support spare migrations. - - - OLCE and level migration for Intel IMSM arrays. - OnLine Capacity Expansion and level migration (e.g. RAID0 -> RAID5) is - supported for Intel Matrix Storage Manager arrays. - This support is currently 'experimental' for technical reasons. It can - be enabled with "export MDADM_EXPERIMENTAL=1" - - - avoid including wayward devices - If you split a RAID1, mount the two halves as two separate degraded RAID1s, - and then later bring the two back together, it is possible that the md - metadata won't properly show that one must over-ride the other. - mdadm now does extra checking to detect this possibilty and avoid - potentially corrupting data. - - - remove any possible confusion between similar options. - e.g. --brief and --bitmap were mapped to 'b' and mdadm wouldn't - notice if one was used where the other was expected. - - - allow K,M,G suffixes on chunk sizes - -Changes Prior to release 3.2 - - By far the most significant change in this release related to the - management of reshaping arrays. This code has been substantially - re-written so that it can work with 'externally managed metadata' - - Intel's IMSM in particular. We now support level migration and - OnLine Capacity Expansion on these arrays. - - Policy framework. - Various policy statements can be made in the mdadm.conf to guide - the behaviour of mdadm, particular with regards to how new devices - are treated by "mdadm -I". - Depending on the 'action' associated with a device (identified by - its 'path') such need devices can be automatically re-added to and - existing array that they previously fell out off, or automatically - added as a spare if they appear to contain no data. - - - mdadm now has a limited understanding of partition tables. This - allows the policy framework to make decisions about partitioned - devices as well. - - - --incremental --remove can be told what --path the device was on, - and this info will be recorded so that another device appearing at - the same physical location can be preferentially added to the same - array (provides the spare-same-slot action policy applied to the - path). - - - A new flags "--invalid-backup" flag is available in --assemble - mode. This can be used to re-assemble an array which was stopping - in the middle of a reshape, and for which the 'backup file' is no - longer available or is corrupted. The array may have some - corruption in it at the point where reshape was up to, but at least - the rest of the array will become available. - - - - Various internal restructuring - more is needed. - -Changes Prior to release 3.1.5 - - Fixes for v1.x metadata on big-endian machines. - - man page improvements - - Improve '--detail --export' when run on partitions of an md array. - - Fix regression with removing 'failed' or 'detached' devices. - - Fixes for "--assemble --force" in various unusual cases. - - Allow '-Y' to mean --export. This was documented but not implemented. - - Various fixed for handling 'ddf' metadata. This is now more reliable - but could benefit from more interoperability testing. - - Correctly list subarrays of a container in "--detail" output. - - Improve checks on whether the requested number of devices is supported - by the metadata - both for --create and --grow. - - Don't remove partitions from a device that is being included in an - array until we are fully committed to including it. - - Allow "--assemble --update=no-bitmap" so an array with a corrupt - bitmap can still be assembled. - - Don't allow --add to succeed if it looks like a "--re-add" is probably - wanted, but cannot succeed. This avoids inadvertently turning - devices into spares when an array is failed. - -Changes Prior to release 3.1.4 - Two fixes related to configs that aren't using udev: - - Don't remove md devices which 'standard' names on --stop - - Allow dev_open to work on read-only /dev - And fixed regressions: - - Allow --incremental to add spares to an array - - Accept --no-degraded as a deprecated option rather than - throwing an error - - Return correct success status when --incrmental assembling - a container which does not yet have enough devices. - - Don't link mdadm with pthreads, only mdmon needs it. - - Fix compiler warning due to bad use of snprintf - -Changes Prior to release 3.1.3 - - mapfile now lives in a fixed location which default to - /dev/.mdadm/map but can be changed at compile time. This - location is choses and most distros provide it during early - boot and preserve it through. As long a /dev exists and is - writable, /dev/.mdadm will be created. - Other files file communication with mdmon live here too. - This fixes a bug reported by Debian and Gentoo users where - udev would spin in early-boot. - - IMSM and DDF metadata will not be recognised on partitions - as they should only be used on whole-disks. - - Various overflows causes by 2G drives have been addressed. - - A subarray of an IMSM contain can now be killed with - --kill-subarray. Also subarrays can be renamed with - --update-subarray - - -If (or --incremental --fail) can be used from udev to - fail and remove from all arrays a device which has been - unplugged from the system. i.e. hot-unplug-support. - - "mdadm /dev/mdX --re-add missing" will look for any device - that looks like it should be a member of /dev/mdX but isn't - and will automatically --re-add it - - Now compile with -Wextra to get extra warnings. - - Lots of minor bug fixes, documentation improvements, etcc - -Changes Prior to release 3.1.2 - - The default metadata has change again (sorry about that). - It is now v1.2 and will hopefully stay that way. It turned - out there with boot-block issues with v1.1 which make it - unsuitable for a default, though in many cases it is still - suitable to use. - - Stopping a container is not permitted when members are still - active - - Add 'homehost' to the valid words for the "AUTO" config file - line. When followed by "-all", this causes mdadm to - auto-assemble any array belonging to this host, but not - auto-assemble anything else. - - Fix some bugs with "--grow --chunksize=" for changing chunksize. - - VAR_RUN can be easily changed at compile time just like ALT_RUN. - This gives distros more flexability in how to manage the - pid and sock files that mdmon needs. - - Various mdmon fixes - - Alway make bitmap 4K-aligned if at all possible. - - If mdadm.conf lists arrays which have inter-dependencies, - the previously had to be listed in the "right" order. Now - any order should work. - - Fix --force assembly of v1.x arrays which are in the process - of recovering. - - Add section on 'scrubbing' to 'md' man page. - - Various command-line-option parsing improvements. - - ... and lots of other bug fixes. - -Changes Prior to release 3.1.1 - - Multiple fixes for new --grow levels including fixes for - serious data corruption problems. - - Change default metadata to v1.1 - - Change default chunk size to 512K - - Change default bitmap chunk size to 64Meg - - When --re-add is used, don't fall back to - --add if --re-add fails as this can destroy data. - -Changes Prior to release 3.1 - - Support --grow to change the layout of RAID4/5/6 - - Support --grow to change the chunksize of raid 4/5/6 - - Support --grow to change level from RAID1 -> RAID5 -> RAID6 and - back. - - Support --grow to reduce the number of devices in RAID4/5/6. - - Support restart of these grow options which assembling an array - which is partially grown. - - Assorted tests of this code, and of different RAID6 layouts. - -Changes Prior to release 3.0.3 - - Improvements for creating arrays giving just a name, like 'foo', - rather than the full '/dev/md/foo'. - - Improvements for assembling member arrays of containers. - - Improvements to test suite - - Add option to change increment for RebuildNN messages reported - by "mdadm --monitor" - - Improvements to mdmon 'hand-over' from initrd to final root. - - Handle merging of devices that have left an IMSM array and are - being re-incorporated. - - Add missing space in "--detail --brief" output. - -Changes Prior to release 3.0.2 - - Fix crash when hosthost is not set, as often happens in - early boot. - -Changes Prior to release 3.0.1 - - Fix various segfaults - - Fixed for --examine with containers - - Lots of other little fixes. - -Changes Prior to release 3.0 - - Support for externally managed metadata, specifically DDF and IMSM. - - Depend on udev to create entries in /dev, rather than creating them - ourselves. - - remove --auto-update-home-hosts - - new config file line "auto" - - new "" and "any" options for "homehost" - - numerous bug fixes and minor enhancements.