diff mbox series

[1/4] mdadm/tests: bitmap cases enhance

Message ID 20240528135150.26823-2-xni@redhat.com (mailing list archive)
State Accepted
Headers show
Series mdadm/tests: fix and enhance some cases | expand

Commit Message

Xiao Ni May 28, 2024, 1:51 p.m. UTC 
It fails because bitmap dirty number is smaller than 400 sometimes. It's not
good to compare bitmap dirty bits with a number. It depends on the test
machine, it can flush soon before checking the number. So remove related codes.

Signed-off-by: Xiao Ni <xni@redhat.com>
---
 tests/05r1-grow-internal      | 11 ++++-------
 tests/05r1-grow-internal-1    | 12 ++++--------
 tests/05r1-internalbitmap     | 22 ++++++++++------------
 tests/05r1-internalbitmap-v1a | 22 ++++++++++------------
 tests/05r1-internalbitmap-v1b | 23 ++++++++++-------------
 tests/05r1-internalbitmap-v1c | 22 ++++++++++------------
 6 files changed, 48 insertions(+), 64 deletions(-)
diff mbox series

Patch

diff --git a/tests/05r1-grow-internal b/tests/05r1-grow-internal
index 24b3aece2bfd..f7fff989a9ce 100644
--- a/tests/05r1-grow-internal
+++ b/tests/05r1-grow-internal
@@ -8,18 +8,15 @@  testdev $md0 1 $mdsize1a 64
 
 #mdadm -E $dev1
 mdadm --grow $md0 --bitmap=internal --bitmap-chunk=4 --delay=1 || { mdadm -X $dev2 ; exit 1; }
-dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 sleep 4
-dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
 testdev $md0 1 $mdsize1a 64
-dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 sleep 4
-dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-#echo $dirty1 $dirty2 $dirty3 $dirty4
-if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ]
-then
+if [ $dirty1 -ne 0 -o $dirty2 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: dirty1 $dirty1, dirty2 $dirty2"
    echo bad dirty counts
    exit 1
 fi
diff --git a/tests/05r1-grow-internal-1 b/tests/05r1-grow-internal-1
index 2f0d82376164..f0f8349f8ccf 100644
--- a/tests/05r1-grow-internal-1
+++ b/tests/05r1-grow-internal-1
@@ -8,19 +8,15 @@  testdev $md0 1 $mdsize1b 64
 
 #mdadm -E $dev1
 mdadm --grow $md0 --bitmap=internal --bitmap-chunk=4 --delay=1
-dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 sleep 4
-dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
 testdev $md0 1 $mdsize1b 64
-dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 sleep 4
-dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-#echo $dirty1 $dirty2 $dirty3 $dirty4
-if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ]
-then
-   echo bad dirty counts
+if [ $dirty1 -ne 0 -o $dirty2 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: dirty1 $dirty1, dirty2 $dirty2"
    exit 1
 fi
 
diff --git a/tests/05r1-internalbitmap b/tests/05r1-internalbitmap
index dd7232a7ad5a..f1a2843efa10 100644
--- a/tests/05r1-internalbitmap
+++ b/tests/05r1-internalbitmap
@@ -9,21 +9,20 @@  mdadm -S $md0
 
 mdadm --assemble $md0 $dev1 $dev2
 testdev $md0 1 $mdsize0 64
-dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 sleep 4
-dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
-then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
+if [ $dirty1 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
   exit 1
 fi
 mdadm $md0 -f $dev1
 testdev $md0 1 $mdsize0 64
 sleep 4
-dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-if [ $dirty3 -lt 400 ]
-then
-   echo >&2 "ERROR dirty count $dirty3 is too small"
+total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+if [ $dirty2 -ne $total ]
+then  echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
    exit 2
 fi
 
@@ -34,13 +33,12 @@  mdadm --zero-superblock $dev1
 mdadm $md0 --add $dev1
 check recovery
 
-dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 check wait
 sleep 4
-dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
-then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
+if [ $dirty3 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: $dirty3"
   exit 1
 fi
 
diff --git a/tests/05r1-internalbitmap-v1a b/tests/05r1-internalbitmap-v1a
index 3ddc082feafc..cf3f39722d83 100644
--- a/tests/05r1-internalbitmap-v1a
+++ b/tests/05r1-internalbitmap-v1a
@@ -10,21 +10,20 @@  mdadm -S $md0
 
 mdadm --assemble $md0 $dev1 $dev2
 testdev $md0 1 $mdsize1b 64
-dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 sleep 4
-dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
-then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
+if [ $dirty1 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
   exit 1
 fi
 mdadm $md0 -f $dev1
 testdev $md0 1 $mdsize1b 64
 sleep 4
-dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-if [ $dirty3 -lt 400 ]
-then
-   echo >&2 "ERROR dirty count $dirty3 is too small"
+total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+if [ $dirty2 -ne $total ]
+then  echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
    exit 2
 fi
 
@@ -35,13 +34,12 @@  mdadm --assemble -R $md0  $dev2
 mdadm $md0 --add $dev1
 check recovery
 
-dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 check wait
 sleep 4
-dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
-then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
+if [ $dirty3 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: $dirty3"
   exit 1
 fi
 
diff --git a/tests/05r1-internalbitmap-v1b b/tests/05r1-internalbitmap-v1b
index 40f7abea46a3..4952887e8ab9 100644
--- a/tests/05r1-internalbitmap-v1b
+++ b/tests/05r1-internalbitmap-v1b
@@ -11,21 +11,20 @@  mdadm -S $md0
 mdadm --assemble $md0 $dev1 $dev2
 check bitmap
 testdev $md0 1 $mdsize11 64
-dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 sleep 4
-dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
-then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
+if [ $dirty1 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
   exit 1
 fi
 mdadm $md0 -f $dev1
 testdev $md0 1 $mdsize11 64
 sleep 4
-dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-if [ $dirty3 -lt 400 ]
-then
-   echo >&2 "ERROR dirty count $dirty3 is too small"
+total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+if [ $dirty2 -ne $total ]
+then  echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
    exit 2
 fi
 
@@ -35,14 +34,12 @@  mdadm --zero-superblock $dev1
 mdadm --assemble -R $md0  $dev2
 mdadm $md0 --add $dev1
 check recovery
-
-dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 check wait
 sleep 4
-dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
-then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
+if [ $dirty3 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: $dirty3"
   exit 1
 fi
 
diff --git a/tests/05r1-internalbitmap-v1c b/tests/05r1-internalbitmap-v1c
index 2eaea59b79c0..e1e4472f0929 100644
--- a/tests/05r1-internalbitmap-v1c
+++ b/tests/05r1-internalbitmap-v1c
@@ -10,21 +10,20 @@  mdadm -S $md0
 
 mdadm --assemble $md0 $dev1 $dev2
 testdev $md0 1 $mdsize12 64
-dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 sleep 4
-dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
-then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
+if [ $dirty1 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
   exit 1
 fi
 mdadm $md0 -f $dev1
 testdev $md0 1 $mdsize12 64
 sleep 4
-dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-if [ $dirty3 -lt 400 ]
-then
-   echo >&2 "ERROR dirty count $dirty3 is too small"
+total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+if [ $dirty2 -ne $total ]
+then  echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
    exit 2
 fi
 
@@ -35,13 +34,12 @@  mdadm --assemble -R $md0  $dev2
 mdadm $md0 --add $dev1
 check recovery
 
-dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 check wait
 sleep 4
-dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
 
-if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
-then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
+if [ $dirty3 -ne 0 ]
+then  echo >&2 "ERROR bad 'dirty' counts: $dirty3"
   exit 1
 fi