From patchwork Sun Feb 5 15:48:54 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Maciej W. Rozycki" X-Patchwork-Id: 13129091 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 22C62C6379F for ; Sun, 5 Feb 2023 15:49:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229780AbjBEPtD (ORCPT ); Sun, 5 Feb 2023 10:49:03 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43814 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229768AbjBEPtC (ORCPT ); Sun, 5 Feb 2023 10:49:02 -0500 Received: from angie.orcam.me.uk (angie.orcam.me.uk [IPv6:2001:4190:8020::34]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 556DE9038; Sun, 5 Feb 2023 07:49:01 -0800 (PST) Received: by angie.orcam.me.uk (Postfix, from userid 500) id 106B792009C; Sun, 5 Feb 2023 16:48:55 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by angie.orcam.me.uk (Postfix) with ESMTP id 0478292009B; Sun, 5 Feb 2023 15:48:54 +0000 (GMT) Date: Sun, 5 Feb 2023 15:48:54 +0000 (GMT) From: "Maciej W. Rozycki" To: Bjorn Helgaas , Mahesh J Salgaonkar , Oliver O'Halloran , Michael Ellerman , Nicholas Piggin , Christophe Leroy , Saeed Mahameed , Leon Romanovsky , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni cc: Alex Williamson , Lukas Wunner , Mika Westerberg , Stefan Roese , Jim Wilson , David Abdurachmanov , =?utf-8?q?Pali_Roh?= =?utf-8?q?=C3=A1r?= , linux-pci@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, linux-rdma@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v6 0/7] pci: Work around ASMedia ASM2824 PCIe link training failures Message-ID: User-Agent: Alpine 2.21 (DEB 202 2017-01-01) MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-rdma@vger.kernel.org Hi, This is v6 of the change to work around a PCIe link training phenomenon where a pair of devices both capable of operating at a link speed above 2.5GT/s seems unable to negotiate the link speed and continues training indefinitely with the Link Training bit switching on and off repeatedly and the data link layer never reaching the active state. Following Bjorn's suggestion from the previous iteration: I have moved the workaround into the PCI core. I have kept the part specific to ASMedia (to lift the speed restriction after a successful retrain) within, although I find it a good candidate for a standalone quirk. It seems to me we'd have to add additional classes of fixups however to move this part to drivers/pci/quirks.c, which I think would be an overkill. So I've only made it explicitly guarded by CONFIG_PCI_QUIRKS; I can see there's prior art with this approach. In the course of the update I have realised that commit 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset") makes no sense and was about to figure out what to do here about it, but then found Lukas's recent patch series addressing this issue (thanks, Lukas, you made my life easier!), so I have rebased my patch set on top of Lukas's: . This has resulted in mild ugliness in that `pcie_downstream_link_retrain' may be called from `pci_bridge_wait_for_secondary_bus' twice, first time via `pcie_wait_for_link_delay' and second time via `pci_dev_wait'. This second call to `pcie_downstream_link_retrain' will do nothing, because for `link_active_reporting' devices `pcie_wait_for_link_delay' will have ensured the link has gone up or the second call won't have been reached. I have also decided to move the initialisation of `link_active_reporting' earlier on, so as to have a single way to check for the feature. This has brought an extra patch and its 3 clean-up dependencies into the series. This was originally observed in a configuration featuring a downstream port of the ASMedia ASM2824 Gen 3 switch wired to the upstream port of the Pericom PI7C9X2G304 Gen 2 switch. However in the course of review I have come to the conclusion that similarly to the earlier similar change to U-Boot it is indeed expected to be safe to apply this workaround to any downstream port that has failed link negotiation provided that: 1. the port is capable of reporting the data link layer link active status (because unlike U-Boot we cannot busy-loop continuously polling the link training bit), and: 2. we don't attempt to lift the 2.5GT/s speed restriction, imposed as the basis of the workaround, for devices not explicitly known to continue working in that case. It is expected to be safe because the workaround is applied to a failed link, that is one that does not (at the time this code is executed) work anyway, so trying to bring it up cannot make the situation worse. This has been verified with a SiFive HiFive unmatched board, with and without CONFIG_PCI_QUIRKS enabled, booting with or without the workaround activated in U-Boot, which covered both the link retraining part of the quirk and the lifting of speed restriction already imposed by U-Boot. I have also issued resets via sysfs to see how this change behaves. For the problematic link this required a hack to remove a `dev->subordinate' check from `pci_parent_bus_reset', which in turn triggered the workaround as expected and brought the link up (but otherwise clobbered downstream devices as one would inevitably expect). I have no way to verify these patches with power management or hot-plug events, but owing to Lukas's effort they get into the same infrastructure, so I expect the workaround to do its job as expected. I note that there is an extra call to `pcie_wait_for_link' from `pciehp_check_link_status', but I expect it to work too. For `link_active_reporting' devices it will call `pcie_downstream_link_retrain' and for`!link_active_reporting' ones we have no means to do anything anyway. The 3 extra clean-ups were only compile-tested (with PowerPC and x86-64 configurations, as appropriate), because I have no suitable hardware available. Please see individual change descriptions for further details. Let me know if this is going in the right direction. Maciej