From patchwork Tue Mar 12 11:46:31 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vipul Pandya X-Patchwork-Id: 2256091 Return-Path: X-Original-To: patchwork-linux-rdma@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork1.kernel.org (Postfix) with ESMTP id CABEC4006E for ; Tue, 12 Mar 2013 11:54:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933022Ab3CLLyA (ORCPT ); Tue, 12 Mar 2013 07:54:00 -0400 Received: from stargate.chelsio.com ([67.207.112.58]:13271 "EHLO stargate.chelsio.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932994Ab3CLLxy (ORCPT ); Tue, 12 Mar 2013 07:53:54 -0400 Received: from maui.asicdesigners.com (maui.asicdesigners.com [10.192.180.15]) by stargate.chelsio.com (8.13.1/8.13.1) with SMTP id r2CBrnvl022828; Tue, 12 Mar 2013 04:53:49 -0700 Received: from strawberry.asicdesigners.com ([10.193.185.96]) by maui.asicdesigners.com with Microsoft SMTPSVC(6.0.3790.4675); Tue, 12 Mar 2013 04:53:49 -0700 From: Vipul Pandya To: netdev@vger.kernel.org, linux-rdma@vger.kernel.org, linux-scsi@vger.kernel.org Cc: davem@davemloft.net, roland@purestorage.com, JBottomley@parallels.com, dm@chelsio.com, swise@opengridcomputing.com, leedom@chelsio.com, naresh@chelsio.com, divy@chelsio.com, santosh@chelsio.com, arvindb@chelsio.com, abhishek@chelsio.com Subject: [PATCH net-next 19/22] csiostor: Segregate T4 adapter operations. Date: Tue, 12 Mar 2013 17:16:31 +0530 Message-Id: <1363088794-31453-20-git-send-email-vipul@chelsio.com> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1363088794-31453-1-git-send-email-vipul@chelsio.com> References: <1363088794-31453-1-git-send-email-vipul@chelsio.com> X-OriginalArrivalTime: 12 Mar 2013 11:53:49.0604 (UTC) FILETIME=[42856E40:01CE1F18] Sender: linux-rdma-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-rdma@vger.kernel.org From: Arvind Bhushan This patch separates T4 adapter operations into a new file. Signed-off-by: Arvind Bhushan Signed-off-by: Naresh Kumar Inna --- drivers/scsi/csiostor/csio_hw_t4.c | 403 ++++++++++++++++++++++++++++++++++++ 1 files changed, 403 insertions(+), 0 deletions(-) create mode 100644 drivers/scsi/csiostor/csio_hw_t4.c diff --git a/drivers/scsi/csiostor/csio_hw_t4.c b/drivers/scsi/csiostor/csio_hw_t4.c new file mode 100644 index 0000000..89ecbac --- /dev/null +++ b/drivers/scsi/csiostor/csio_hw_t4.c @@ -0,0 +1,403 @@ +/* + * This file is part of the Chelsio FCoE driver for Linux. + * + * Copyright (c) 2008-2013 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "csio_hw.h" +#include "csio_init.h" + +/* + * Return the specified PCI-E Configuration Space register from our Physical + * Function. We try first via a Firmware LDST Command since we prefer to let + * the firmware own all of these registers, but if that fails we go for it + * directly ourselves. + */ +static uint32_t +csio_t4_read_pcie_cfg4(struct csio_hw *hw, int reg) +{ + u32 val = 0; + struct csio_mb *mbp; + int rv; + struct fw_ldst_cmd *ldst_cmd; + + mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC); + if (!mbp) { + CSIO_INC_STATS(hw, n_err_nomem); + pci_read_config_dword(hw->pdev, reg, &val); + return val; + } + + csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg); + rv = csio_mb_issue(hw, mbp); + + /* + * If the LDST Command suucceeded, exctract the returned register + * value. Otherwise read it directly ourself. + */ + if (rv == 0) { + ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb); + val = ntohl(ldst_cmd->u.pcie.data[0]); + } else + pci_read_config_dword(hw->pdev, reg, &val); + + mempool_free(mbp, hw->mb_mempool); + + return val; +} + +static int +csio_t4_set_mem_win(struct csio_hw *hw, uint32_t win) +{ + u32 bar0; + u32 mem_win_base; + + /* + * Truncation intentional: we only read the bottom 32-bits of the + * 64-bit BAR0/BAR1 ... We use the hardware backdoor mechanism to + * read BAR0 instead of using pci_resource_start() because we could be + * operating from within a Virtual Machine which is trapping our + * accesses to our Configuration Space and we need to set up the PCI-E + * Memory Window decoders with the actual addresses which will be + * coming across the PCI-E link. + */ + bar0 = csio_t4_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0); + bar0 &= PCI_BASE_ADDRESS_MEM_MASK; + + mem_win_base = bar0 + MEMWIN_BASE; + + /* + * Set up memory window for accessing adapter memory ranges. (Read + * back MA register to ensure that changes propagate before we attempt + * to use the new values.) + */ + csio_wr_reg32(hw, mem_win_base | BIR(0) | + WINDOW(ilog2(MEMWIN_APERTURE) - 10), + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win)); + csio_rd_reg32(hw, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win)); + return 0; +} + +/* + * Interrupt handler for the PCIE module. + */ +static void +csio_t4_pcie_intr_handler(struct csio_hw *hw) +{ + static struct intr_info sysbus_intr_info[] = { + { RNPP, "RXNP array parity error", -1, 1 }, + { RPCP, "RXPC array parity error", -1, 1 }, + { RCIP, "RXCIF array parity error", -1, 1 }, + { RCCP, "Rx completions control array parity error", -1, 1 }, + { RFTP, "RXFT array parity error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + static struct intr_info pcie_port_intr_info[] = { + { TPCP, "TXPC array parity error", -1, 1 }, + { TNPP, "TXNP array parity error", -1, 1 }, + { TFTP, "TXFT array parity error", -1, 1 }, + { TCAP, "TXCA array parity error", -1, 1 }, + { TCIP, "TXCIF array parity error", -1, 1 }, + { RCAP, "RXCA array parity error", -1, 1 }, + { OTDD, "outbound request TLP discarded", -1, 1 }, + { RDPE, "Rx data parity error", -1, 1 }, + { TDUE, "Tx uncorrectable data error", -1, 1 }, + { 0, NULL, 0, 0 } + }; + + static struct intr_info pcie_intr_info[] = { + { MSIADDRLPERR, "MSI AddrL parity error", -1, 1 }, + { MSIADDRHPERR, "MSI AddrH parity error", -1, 1 }, + { MSIDATAPERR, "MSI data parity error", -1, 1 }, + { MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 }, + { MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 }, + { MSIXDATAPERR, "MSI-X data parity error", -1, 1 }, + { MSIXDIPERR, "MSI-X DI parity error", -1, 1 }, + { PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 }, + { PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 }, + { TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 }, + { CCNTPERR, "PCI CMD channel count parity error", -1, 1 }, + { CREQPERR, "PCI CMD channel request parity error", -1, 1 }, + { CRSPPERR, "PCI CMD channel response parity error", -1, 1 }, + { DCNTPERR, "PCI DMA channel count parity error", -1, 1 }, + { DREQPERR, "PCI DMA channel request parity error", -1, 1 }, + { DRSPPERR, "PCI DMA channel response parity error", -1, 1 }, + { HCNTPERR, "PCI HMA channel count parity error", -1, 1 }, + { HREQPERR, "PCI HMA channel request parity error", -1, 1 }, + { HRSPPERR, "PCI HMA channel response parity error", -1, 1 }, + { CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 }, + { FIDPERR, "PCI FID parity error", -1, 1 }, + { INTXCLRPERR, "PCI INTx clear parity error", -1, 1 }, + { MATAGPERR, "PCI MA tag parity error", -1, 1 }, + { PIOTAGPERR, "PCI PIO tag parity error", -1, 1 }, + { RXCPLPERR, "PCI Rx completion parity error", -1, 1 }, + { RXWRPERR, "PCI Rx write parity error", -1, 1 }, + { RPLPERR, "PCI replay buffer parity error", -1, 1 }, + { PCIESINT, "PCI core secondary fault", -1, 1 }, + { PCIEPINT, "PCI core primary fault", -1, 1 }, + { UNXSPLCPLERR, "PCI unexpected split completion error", -1, + 0 }, + { 0, NULL, 0, 0 } + }; + + int fat; + fat = csio_handle_intr_status(hw, + PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, + sysbus_intr_info) + + csio_handle_intr_status(hw, + PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, + pcie_port_intr_info) + + csio_handle_intr_status(hw, PCIE_INT_CAUSE, pcie_intr_info); + if (fat) + csio_hw_fatal_err(hw); +} + +/* + * csio_t4_flash_cfg_addr - return the address of the flash configuration file + * @hw: the HW module + * + * Return the address within the flash where the Firmware Configuration + * File is stored. + */ +static unsigned int +csio_t4_flash_cfg_addr(struct csio_hw *hw) +{ + return FLASH_CFG_OFFSET; +} + +/* + * csio_t4_mc_read - read from MC through backdoor accesses + * @hw: the hw module + * @idx: not used for T4 adapter + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from MC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +static int +csio_t4_mc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data, + uint64_t *ecc) +{ + int i; + + if (csio_rd_reg32(hw, MC_BIST_CMD) & START_BIST) + return -EBUSY; + csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR); + csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN); + csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN); + csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST | BIST_CMD_GAP(1), + MC_BIST_CMD); + i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD, START_BIST, + 0, 10, 1, NULL); + if (i) + return i; + +#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i) + + for (i = 15; i >= 0; i--) + *data++ = htonl(csio_rd_reg32(hw, MC_DATA(i))); + if (ecc) + *ecc = csio_rd_reg64(hw, MC_DATA(16)); +#undef MC_DATA + return 0; +} + +/* + * csio_t4_edc_read - read from EDC through backdoor accesses + * @hw: the hw module + * @idx: which EDC to access + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from EDC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +static int +csio_t4_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data, + uint64_t *ecc) +{ + int i; + + idx *= EDC_STRIDE; + if (csio_rd_reg32(hw, EDC_BIST_CMD + idx) & START_BIST) + return -EBUSY; + csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR + idx); + csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN + idx); + csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN + idx); + csio_wr_reg32(hw, BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST, + EDC_BIST_CMD + idx); + i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD + idx, START_BIST, + 0, 10, 1, NULL); + if (i) + return i; + +#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx) + + for (i = 15; i >= 0; i--) + *data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i))); + if (ecc) + *ecc = csio_rd_reg64(hw, EDC_DATA(16)); +#undef EDC_DATA + return 0; +} + +/* + * csio_t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window + * @hw: the csio_hw + * @win: PCI-E memory Window to use + * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_MC0 (or MEM_MC) or MEM_MC1 + * @addr: address within indicated memory type + * @len: amount of memory to transfer + * @buf: host memory buffer + * @dir: direction of transfer 1 => read, 0 => write + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address, length and host buffer must be aligned on + * 32-bit boudaries. The memory is transferred as a raw byte sequence + * from/to the firmware's memory. If this memory contains data + * structures which contain multi-byte integers, it's the callers + * responsibility to perform appropriate byte order conversions. + */ +static int +csio_t4_memory_rw(struct csio_hw *hw, u32 win, int mtype, u32 addr, + u32 len, uint32_t *buf, int dir) +{ + u32 pos, start, offset, memoffset, bar0; + u32 edc_size, mc_size, mem_reg, mem_aperture, mem_base; + + /* + * Argument sanity checks ... + */ + if ((addr & 0x3) || (len & 0x3)) + return -EINVAL; + + /* Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 -- T4 + */ + edc_size = EDRAM_SIZE_GET(csio_rd_reg32(hw, MA_EDRAM0_BAR)); + if (mtype != MEM_MC1) + memoffset = (mtype * (edc_size * 1024 * 1024)); + else { + mc_size = EXT_MEM_SIZE_GET(csio_rd_reg32(hw, + MA_EXT_MEMORY_BAR)); + memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024; + } + + /* Determine the PCIE_MEM_ACCESS_OFFSET */ + addr = addr + memoffset; + + /* + * Each PCI-E Memory Window is programmed with a window size -- or + * "aperture" -- which controls the granularity of its mapping onto + * adapter memory. We need to grab that aperture in order to know + * how to use the specified window. The window is also programmed + * with the base address of the Memory Window in BAR0's address + * space. For T4 this is an absolute PCI-E Bus Address. For T5 + * the address is relative to BAR0. + */ + mem_reg = csio_rd_reg32(hw, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win)); + mem_aperture = 1 << (WINDOW(mem_reg) + 10); + mem_base = GET_PCIEOFST(mem_reg) << 10; + + bar0 = csio_t4_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0); + bar0 &= PCI_BASE_ADDRESS_MEM_MASK; + mem_base -= bar0; + + start = addr & ~(mem_aperture-1); + offset = addr - start; + + csio_dbg(hw, "csio_t4_memory_rw: mem_reg: 0x%x, mem_aperture: 0x%x\n", + mem_reg, mem_aperture); + csio_dbg(hw, "csio_t4_memory_rw: mem_base: 0x%x, mem_offset: 0x%x\n", + mem_base, memoffset); + csio_dbg(hw, "csio_t4_memory_rw: bar0: 0x%x, start:0x%x, offset:0x%x\n", + bar0, start, offset); + csio_dbg(hw, "csio_t4_memory_rw: mtype: %d, addr: 0x%x, len: %d\n", + mtype, addr, len); + + for (pos = start; len > 0; pos += mem_aperture, offset = 0) { + /* + * Move PCI-E Memory Window to our current transfer + * position. Read it back to ensure that changes propagate + * before we attempt to use the new value. + */ + csio_wr_reg32(hw, pos, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, win)); + csio_rd_reg32(hw, + PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, win)); + + while (offset < mem_aperture && len > 0) { + if (dir) + *buf++ = csio_rd_reg32(hw, mem_base + offset); + else + csio_wr_reg32(hw, *buf++, mem_base + offset); + + offset += sizeof(__be32); + len -= sizeof(__be32); + } + } + return 0; +} + +/* + * csio_t4_dfs_create_ext_mem - setup debugfs for MC to read the values + * @hw: the csio_hw + * + * This function creates files in the debugfs with external memory region MC. + */ +static void +csio_t4_dfs_create_ext_mem(struct csio_hw *hw) +{ + u32 size; + int i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE); + if (i & EXT_MEM_ENABLE) { + size = csio_rd_reg32(hw, MA_EXT_MEMORY_BAR); + csio_add_debugfs_mem(hw, "mc", MEM_MC, + EXT_MEM_SIZE_GET(size)); + } +} + +/* T4 adapter specific function */ +struct csio_hw_chip_ops t4_ops = { + .chip_set_mem_win = csio_t4_set_mem_win, + .chip_pcie_intr_handler = csio_t4_pcie_intr_handler, + .chip_flash_cfg_addr = csio_t4_flash_cfg_addr, + .chip_mc_read = csio_t4_mc_read, + .chip_edc_read = csio_t4_edc_read, + .chip_memory_rw = csio_t4_memory_rw, + .chip_dfs_create_ext_mem = csio_t4_dfs_create_ext_mem, +};