From patchwork Wed Jun 17 12:28:51 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Marciniszyn, Mike" X-Patchwork-Id: 6624781 Return-Path: X-Original-To: patchwork-linux-rdma@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 1BCCA9F1C1 for ; Wed, 17 Jun 2015 12:29:10 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 883BE208C0 for ; Wed, 17 Jun 2015 12:29:04 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 5D7182089E for ; Wed, 17 Jun 2015 12:28:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751790AbbFQM26 (ORCPT ); Wed, 17 Jun 2015 08:28:58 -0400 Received: from mga02.intel.com ([134.134.136.20]:49799 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751093AbbFQM24 (ORCPT ); Wed, 17 Jun 2015 08:28:56 -0400 Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by orsmga101.jf.intel.com with ESMTP; 17 Jun 2015 05:28:54 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.13,632,1427785200"; d="scan'208";a="729176076" Received: from sedona.ch.intel.com ([143.182.228.65]) by fmsmga001.fm.intel.com with ESMTP; 17 Jun 2015 05:28:54 -0700 Received: from phlsvsles11.ph.intel.com (phlsvsles11.ph.intel.com [10.228.195.43]) by sedona.ch.intel.com (8.13.6/8.14.3/Standard MailSET/Hub) with ESMTP id t5HCSqZp016943; Wed, 17 Jun 2015 05:28:52 -0700 Received: from phlsvslse11.ph.intel.com (localhost [127.0.0.1]) by phlsvsles11.ph.intel.com with ESMTP id t5HCSpXN009198; Wed, 17 Jun 2015 08:28:52 -0400 Subject: [PATCH v3 03/49] IB/hfi1: add chip specific support part2 To: dledford@redhat.com From: Mike Marciniszyn Cc: linux-rdma@vger.kernel.org Date: Wed, 17 Jun 2015 08:28:51 -0400 Message-ID: <20150617122851.8744.80472.stgit@phlsvslse11.ph.intel.com> In-Reply-To: <20150617122755.8744.44665.stgit@phlsvslse11.ph.intel.com> References: <20150617122755.8744.44665.stgit@phlsvslse11.ph.intel.com> User-Agent: StGit/0.16 MIME-Version: 1.0 Sender: linux-rdma-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-rdma@vger.kernel.org X-Spam-Status: No, score=-7.5 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Signed-off-by: Andrew Friedley Signed-off-by: Arthur Kepner Signed-off-by: Brendan Cunningham Signed-off-by: Brian Welty Signed-off-by: Caz Yokoyama Signed-off-by: Dean Luick Signed-off-by: Dennis Dalessandro Signed-off-by: Easwar Hariharan Signed-off-by: Harish Chegondi Signed-off-by: Ira Weiny Signed-off-by: Jim Snow Signed-off-by: John Gregor Signed-off-by: Jubin John Signed-off-by: Kaike Wan Signed-off-by: Kevin Pine Signed-off-by: Kyle Liddell Signed-off-by: Mike Marciniszyn Signed-off-by: Mitko Haralanov Signed-off-by: Ravi Krishnaswamy Signed-off-by: Sadanand Warrier Signed-off-by: Sanath Kumar Signed-off-by: Sudeep Dutt Signed-off-by: Vlad Danushevsky --- drivers/infiniband/hw/hfi1/chip.c | 2890 +++++++++++++++++++++++++++++++++++++ 1 file changed, 2890 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 2bb026d..ed03311 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -2140,3 +2140,2893 @@ static void handle_cce_err(struct hfi1_devdata *dd, u32 unused, u64 reg) } } +/* + * Check counters for receive errors that do not have an interrupt + * associated with them. + */ +#define RCVERR_CHECK_TIME 10 +static void update_rcverr_timer(unsigned long opaque) +{ + struct hfi1_devdata *dd = (struct hfi1_devdata *)opaque; + struct hfi1_pportdata *ppd = dd->pport; + u32 cur_ovfl_cnt = read_dev_cntr(dd, C_RCV_OVF, CNTR_INVALID_VL); + + if (dd->rcv_ovfl_cnt < cur_ovfl_cnt && + ppd->port_error_action & OPA_PI_MASK_EX_BUFFER_OVERRUN) { + dd_dev_info(dd, "%s: PortErrorAction bounce\n", __func__); + set_link_down_reason(ppd, + OPA_LINKDOWN_REASON_EXCESSIVE_BUFFER_OVERRUN, 0, + OPA_LINKDOWN_REASON_EXCESSIVE_BUFFER_OVERRUN); + start_link(ppd); + } + dd->rcv_ovfl_cnt = (u32) cur_ovfl_cnt; + + mod_timer(&dd->rcverr_timer, jiffies + HZ * RCVERR_CHECK_TIME); +} + +static int init_rcverr(struct hfi1_devdata *dd) +{ + init_timer(&dd->rcverr_timer); + dd->rcverr_timer.function = update_rcverr_timer; + dd->rcverr_timer.data = (unsigned long) dd; + /* Assume the hardware counter has been reset */ + dd->rcv_ovfl_cnt = 0; + return mod_timer(&dd->rcverr_timer, jiffies + HZ * RCVERR_CHECK_TIME); +} + +static void free_rcverr(struct hfi1_devdata *dd) +{ + if (dd->rcverr_timer.data) + del_timer_sync(&dd->rcverr_timer); + dd->rcverr_timer.data = 0; +} + +static void handle_rxe_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "Receive Error: %s\n", + rxe_err_status_string(buf, sizeof(buf), reg)); + + if (reg & ALL_RXE_FREEZE_ERR) { + int flags = 0; + + /* + * Freeze mode recovery is disabled for the errors + * in RXE_FREEZE_ABORT_MASK + */ + if (is_a0(dd) && (reg & RXE_FREEZE_ABORT_MASK)) + flags = FREEZE_ABORT; + + start_freeze_handling(dd->pport, flags); + } +} + +static void handle_misc_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "Misc Error: %s", + misc_err_status_string(buf, sizeof(buf), reg)); +} + +static void handle_pio_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "PIO Error: %s\n", + pio_err_status_string(buf, sizeof(buf), reg)); + + if (reg & ALL_PIO_FREEZE_ERR) + start_freeze_handling(dd->pport, 0); +} + +static void handle_sdma_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "SDMA Error: %s\n", + sdma_err_status_string(buf, sizeof(buf), reg)); + + if (reg & ALL_SDMA_FREEZE_ERR) + start_freeze_handling(dd->pport, 0); +} + +static void count_port_inactive(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd = dd->pport; + + if (ppd->port_xmit_discards < ~(u64)0) + ppd->port_xmit_discards++; +} + +/* + * We have had a "disallowed packet" error during egress. Determine the + * integrity check which failed, and update relevant error counter, etc. + * + * Note that the SEND_EGRESS_ERR_INFO register has only a single + * bit of state per integrity check, and so we can miss the reason for an + * egress error if more than one packet fails the same integrity check + * since we cleared the corresponding bit in SEND_EGRESS_ERR_INFO. + */ +static void handle_send_egress_err_info(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd = dd->pport; + u64 src = read_csr(dd, SEND_EGRESS_ERR_SOURCE); /* read first */ + u64 info = read_csr(dd, SEND_EGRESS_ERR_INFO); + char buf[96]; + + /* clear down all observed info as quickly as possible after read */ + write_csr(dd, SEND_EGRESS_ERR_INFO, info); + + dd_dev_info(dd, + "Egress Error Info: 0x%llx, %s Egress Error Src 0x%llx\n", + info, egress_err_info_string(buf, sizeof(buf), info), src); + + /* Eventually add other counters for each bit */ + + if (info & SEND_EGRESS_ERR_INFO_TOO_LONG_IB_PACKET_ERR_SMASK) { + if (ppd->port_xmit_discards < ~(u64)0) + ppd->port_xmit_discards++; + } +} + +/* + * Input value is a bit position within the SEND_EGRESS_ERR_STATUS + * register. Does it represent a 'port inactive' error? + */ +static inline int port_inactive_err(u64 posn) +{ + return (posn >= SEES(TX_LINKDOWN) && + posn <= SEES(TX_INCORRECT_LINK_STATE)); +} + +/* + * Input value is a bit position within the SEND_EGRESS_ERR_STATUS + * register. Does it represent a 'disallowed packet' error? + */ +static inline int disallowed_pkt_err(u64 posn) +{ + return (posn >= SEES(TX_SDMA0_DISALLOWED_PACKET) && + posn <= SEES(TX_SDMA15_DISALLOWED_PACKET)); +} + +static void handle_egress_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + u64 reg_copy = reg, handled = 0; + char buf[96]; + + if (reg & ALL_TXE_EGRESS_FREEZE_ERR) + start_freeze_handling(dd->pport, 0); + if (is_a0(dd) && (reg & + SEND_EGRESS_ERR_STATUS_TX_CREDIT_RETURN_VL_ERR_SMASK) + && (dd->icode != ICODE_FUNCTIONAL_SIMULATOR)) + start_freeze_handling(dd->pport, 0); + + while (reg_copy) { + int posn = fls64(reg_copy); + /* + * fls64() returns a 1-based offset, but we generally + * want 0-based offsets. + */ + int shift = posn - 1; + + if (port_inactive_err(shift)) { + count_port_inactive(dd); + handled |= (1ULL << shift); + } else if (disallowed_pkt_err(shift)) { + handle_send_egress_err_info(dd); + handled |= (1ULL << shift); + } + clear_bit(shift, (unsigned long *)®_copy); + } + + reg &= ~handled; + + if (reg) + dd_dev_info(dd, "Egress Error: %s\n", + egress_err_status_string(buf, sizeof(buf), reg)); +} + +static void handle_txe_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "Send Error: %s\n", + send_err_status_string(buf, sizeof(buf), reg)); + +} + +/* + * The maximum number of times the error clear down will loop before + * blocking a repeating error. This value is arbitrary. + */ +#define MAX_CLEAR_COUNT 20 + +/* + * Clear and handle an error register. All error interrupts are funneled + * through here to have a central location to correctly handle single- + * or multi-shot errors. + * + * For non per-context registers, call this routine with a context value + * of 0 so the per-context offset is zero. + * + * If the handler loops too many times, assume that something is wrong + * and can't be fixed, so mask the error bits. + */ +static void interrupt_clear_down(struct hfi1_devdata *dd, + u32 context, + const struct err_reg_info *eri) +{ + u64 reg; + u32 count; + + /* read in a loop until no more errors are seen */ + count = 0; + while (1) { + reg = read_kctxt_csr(dd, context, eri->status); + if (reg == 0) + break; + write_kctxt_csr(dd, context, eri->clear, reg); + if (likely(eri->handler)) + eri->handler(dd, context, reg); + count++; + if (count > MAX_CLEAR_COUNT) { + u64 mask; + + dd_dev_err(dd, "Repeating %s bits 0x%llx - masking\n", + eri->desc, reg); + /* + * Read-modify-write so any other masked bits + * remain masked. + */ + mask = read_kctxt_csr(dd, context, eri->mask); + mask &= ~reg; + write_kctxt_csr(dd, context, eri->mask, mask); + break; + } + } +} + +/* + * CCE block "misc" interrupt. Source is < 16. + */ +static void is_misc_err_int(struct hfi1_devdata *dd, unsigned int source) +{ + const struct err_reg_info *eri = &misc_errs[source]; + + if (eri->handler) { + interrupt_clear_down(dd, 0, eri); + } else { + dd_dev_err(dd, "Unexpected misc interrupt (%u) - reserved\n", + source); + } +} + +static char *send_context_err_status_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, + sc_err_status_flags, ARRAY_SIZE(sc_err_status_flags)); +} + +/* + * Send context error interrupt. Source (hw_context) is < 160. + * + * All send context errors cause the send context to halt. The normal + * clear-down mechanism cannot be used because we cannot clear the + * error bits until several other long-running items are done first. + * This is OK because with the context halted, nothing else is going + * to happen on it anyway. + */ +static void is_sendctxt_err_int(struct hfi1_devdata *dd, + unsigned int hw_context) +{ + struct send_context_info *sci; + struct send_context *sc; + char flags[96]; + u64 status; + u32 sw_index; + + sw_index = dd->hw_to_sw[hw_context]; + if (sw_index >= dd->num_send_contexts) { + dd_dev_err(dd, + "out of range sw index %u for send context %u\n", + sw_index, hw_context); + return; + } + sci = &dd->send_contexts[sw_index]; + sc = sci->sc; + if (!sc) { + dd_dev_err(dd, "%s: context %u(%u): no sc?\n", __func__, + sw_index, hw_context); + return; + } + + /* tell the software that a halt has begun */ + sc_stop(sc, SCF_HALTED); + + status = read_kctxt_csr(dd, hw_context, SEND_CTXT_ERR_STATUS); + + dd_dev_info(dd, "Send Context %u(%u) Error: %s\n", sw_index, hw_context, + send_context_err_status_string(flags, sizeof(flags), status)); + + if (status & SEND_CTXT_ERR_STATUS_PIO_DISALLOWED_PACKET_ERR_SMASK) + handle_send_egress_err_info(dd); + + /* + * Automatically restart halted kernel contexts out of interrupt + * context. User contexts must ask the driver to restart the context. + */ + if (sc->type != SC_USER) + queue_work(dd->pport->hfi1_wq, &sc->halt_work); +} + +static void handle_sdma_eng_err(struct hfi1_devdata *dd, + unsigned int source, u64 status) +{ + struct sdma_engine *sde; + + sde = &dd->per_sdma[source]; + /* BUG_ON(source != 0); */ +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(sde->dd, "CONFIG SDMA(%u) %s:%d %s()\n", sde->this_idx, + slashstrip(__FILE__), __LINE__, __func__); + dd_dev_err(sde->dd, "CONFIG SDMA(%u) source: %u status 0x%llx\n", + sde->this_idx, source, (unsigned long long)status); +#endif + sdma_engine_error(sde, status); +} + +/* + * CCE block SDMA error interrupt. Source is < 16. + */ +static void is_sdma_eng_err_int(struct hfi1_devdata *dd, unsigned int source) +{ +#ifdef CONFIG_SDMA_VERBOSITY + struct sdma_engine *sde = &dd->per_sdma[source]; + + dd_dev_err(dd, "CONFIG SDMA(%u) %s:%d %s()\n", sde->this_idx, + slashstrip(__FILE__), __LINE__, __func__); + dd_dev_err(dd, "CONFIG SDMA(%u) source: %u\n", sde->this_idx, + source); + sdma_dumpstate(sde); +#endif + interrupt_clear_down(dd, source, &sdma_eng_err); +} + +/* + * CCE block "various" interrupt. Source is < 8. + */ +static void is_various_int(struct hfi1_devdata *dd, unsigned int source) +{ + const struct err_reg_info *eri = &various_err[source]; + + /* + * TCritInt cannot go through interrupt_clear_down() + * because it is not a second tier interrupt. The handler + * should be called directly. + */ + if (source == TCRIT_INT_SOURCE) + handle_temp_err(dd); + else if (eri->handler) + interrupt_clear_down(dd, 0, eri); + else + dd_dev_info(dd, + "%s: Unimplemented/reserved interrupt %d\n", + __func__, source); +} + +static void handle_qsfp_int(struct hfi1_devdata *dd, u32 src_ctx, u64 reg) +{ + /* source is always zero */ + struct hfi1_pportdata *ppd = dd->pport; + unsigned long flags; + u64 qsfp_int_mgmt = (u64)(QSFP_HFI0_INT_N | QSFP_HFI0_MODPRST_N); + + if (reg & QSFP_HFI0_MODPRST_N) { + + dd_dev_info(dd, "%s: ModPresent triggered QSFP interrupt\n", + __func__); + + if (!qsfp_mod_present(ppd)) { + ppd->driver_link_ready = 0; + /* + * Cable removed, reset all our information about the + * cache and cable capabilities + */ + + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + /* + * We don't set cache_refresh_required here as we expect + * an interrupt when a cable is inserted + */ + ppd->qsfp_info.cache_valid = 0; + ppd->qsfp_info.qsfp_interrupt_functional = 0; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, + flags); + write_csr(dd, + dd->hfi1_id ? + ASIC_QSFP2_INVERT : + ASIC_QSFP1_INVERT, + qsfp_int_mgmt); + if (ppd->host_link_state == HLS_DN_POLL) { + /* + * The link is still in POLL. This means + * that the normal link down processing + * will not happen. We have to do it here + * before turning the DC off. + */ + queue_work(ppd->hfi1_wq, &ppd->link_down_work); + } + } else { + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + ppd->qsfp_info.cache_valid = 0; + ppd->qsfp_info.cache_refresh_required = 1; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, + flags); + + qsfp_int_mgmt &= ~(u64)QSFP_HFI0_MODPRST_N; + write_csr(dd, + dd->hfi1_id ? + ASIC_QSFP2_INVERT : + ASIC_QSFP1_INVERT, + qsfp_int_mgmt); + } + } + + if (reg & QSFP_HFI0_INT_N) { + + dd_dev_info(dd, "%s: IntN triggered QSFP interrupt\n", + __func__); + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + ppd->qsfp_info.check_interrupt_flags = 1; + ppd->qsfp_info.qsfp_interrupt_functional = 1; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, flags); + } + + /* Schedule the QSFP work only if there is a cable attached. */ + if (qsfp_mod_present(ppd)) + queue_work(ppd->hfi1_wq, &ppd->qsfp_info.qsfp_work); +} + +static int request_host_lcb_access(struct hfi1_devdata *dd) +{ + int ret; + + ret = do_8051_command(dd, HCMD_MISC, + (u64)HCMD_MISC_REQUEST_LCB_ACCESS << LOAD_DATA_FIELD_ID_SHIFT, + NULL); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, "%s: command failed with error %d\n", + __func__, ret); + } + return ret == HCMD_SUCCESS ? 0 : -EBUSY; +} + +static int request_8051_lcb_access(struct hfi1_devdata *dd) +{ + int ret; + + ret = do_8051_command(dd, HCMD_MISC, + (u64)HCMD_MISC_GRANT_LCB_ACCESS << LOAD_DATA_FIELD_ID_SHIFT, + NULL); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, "%s: command failed with error %d\n", + __func__, ret); + } + return ret == HCMD_SUCCESS ? 0 : -EBUSY; +} + +/* + * Set the LCB selector - allow host access. The DCC selector always + * points to the host. + */ +static inline void set_host_lcb_access(struct hfi1_devdata *dd) +{ + write_csr(dd, DC_DC8051_CFG_CSR_ACCESS_SEL, + DC_DC8051_CFG_CSR_ACCESS_SEL_DCC_SMASK + | DC_DC8051_CFG_CSR_ACCESS_SEL_LCB_SMASK); +} + +/* + * Clear the LCB selector - allow 8051 access. The DCC selector always + * points to the host. + */ +static inline void set_8051_lcb_access(struct hfi1_devdata *dd) +{ + write_csr(dd, DC_DC8051_CFG_CSR_ACCESS_SEL, + DC_DC8051_CFG_CSR_ACCESS_SEL_DCC_SMASK); +} + +/* + * Acquire LCB access from the 8051. If the host already has access, + * just increment a counter. Otherwise, inform the 8051 that the + * host is taking access. + * + * Returns: + * 0 on success + * -EBUSY if the 8051 has control and cannot be disturbed + * -errno if unable to acquire access from the 8051 + */ +int acquire_lcb_access(struct hfi1_devdata *dd, int sleep_ok) +{ + struct hfi1_pportdata *ppd = dd->pport; + int ret = 0; + + /* + * Use the host link state lock so the operation of this routine + * { link state check, selector change, count increment } can occur + * as a unit against a link state change. Otherwise there is a + * race between the state change and the count increment. + */ + if (sleep_ok) { + mutex_lock(&ppd->hls_lock); + } else { + while (mutex_trylock(&ppd->hls_lock) == EBUSY) + udelay(1); + } + + /* this access is valid only when the link is up */ + if ((ppd->host_link_state & HLS_UP) == 0) { + dd_dev_info(dd, "%s: link state %s not up\n", + __func__, link_state_name(ppd->host_link_state)); + ret = -EBUSY; + goto done; + } + + if (dd->lcb_access_count == 0) { + ret = request_host_lcb_access(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire LCB access, err %d\n", + __func__, ret); + goto done; + } + set_host_lcb_access(dd); + } + dd->lcb_access_count++; +done: + mutex_unlock(&ppd->hls_lock); + return ret; +} + +/* + * Release LCB access by decrementing the use count. If the count is moving + * from 1 to 0, inform 8051 that it has control back. + * + * Returns: + * 0 on success + * -errno if unable to release access to the 8051 + */ +int release_lcb_access(struct hfi1_devdata *dd, int sleep_ok) +{ + int ret = 0; + + /* + * Use the host link state lock because the acquire needed it. + * Here, we only need to keep { selector change, count decrement } + * as a unit. + */ + if (sleep_ok) { + mutex_lock(&dd->pport->hls_lock); + } else { + while (mutex_trylock(&dd->pport->hls_lock) == EBUSY) + udelay(1); + } + + if (dd->lcb_access_count == 0) { + dd_dev_err(dd, "%s: LCB access count is zero. Skipping.\n", + __func__); + goto done; + } + + if (dd->lcb_access_count == 1) { + set_8051_lcb_access(dd); + ret = request_8051_lcb_access(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to release LCB access, err %d\n", + __func__, ret); + /* restore host access if the grant didn't work */ + set_host_lcb_access(dd); + goto done; + } + } + dd->lcb_access_count--; +done: + mutex_unlock(&dd->pport->hls_lock); + return ret; +} + +/* + * Initialize LCB access variables and state. Called during driver load, + * after most of the initialization is finished. + * + * The DC default is LCB access on for the host. The driver defaults to + * leaving access to the 8051. Assign access now - this constrains the call + * to this routine to be after all LCB set-up is done. In particular, after + * hf1_init_dd() -> set_up_interrupts() -> clear_all_interrupts() + */ +static void init_lcb_access(struct hfi1_devdata *dd) +{ + dd->lcb_access_count = 0; +} + +/* + * Write a response back to a 8051 request. + */ +static void hreq_response(struct hfi1_devdata *dd, u8 return_code, u16 rsp_data) +{ + write_csr(dd, DC_DC8051_CFG_EXT_DEV_0, + DC_DC8051_CFG_EXT_DEV_0_COMPLETED_SMASK + | (u64)return_code << DC_DC8051_CFG_EXT_DEV_0_RETURN_CODE_SHIFT + | (u64)rsp_data << DC_DC8051_CFG_EXT_DEV_0_RSP_DATA_SHIFT); +} + +/* + * Handle requests from the 8051. + */ +static void handle_8051_request(struct hfi1_devdata *dd) +{ + u64 reg; + u16 data; + u8 type; + + reg = read_csr(dd, DC_DC8051_CFG_EXT_DEV_1); + if ((reg & DC_DC8051_CFG_EXT_DEV_1_REQ_NEW_SMASK) == 0) + return; /* no request */ + + /* zero out COMPLETED so the response is seen */ + write_csr(dd, DC_DC8051_CFG_EXT_DEV_0, 0); + + /* extract request details */ + type = (reg >> DC_DC8051_CFG_EXT_DEV_1_REQ_TYPE_SHIFT) + & DC_DC8051_CFG_EXT_DEV_1_REQ_TYPE_MASK; + data = (reg >> DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_SHIFT) + & DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_MASK; + + switch (type) { + case HREQ_LOAD_CONFIG: + case HREQ_SAVE_CONFIG: + case HREQ_READ_CONFIG: + case HREQ_SET_TX_EQ_ABS: + case HREQ_SET_TX_EQ_REL: + case HREQ_ENABLE: + dd_dev_info(dd, "8051 request: request 0x%x not supported\n", + type); + hreq_response(dd, HREQ_NOT_SUPPORTED, 0); + break; + + case HREQ_CONFIG_DONE: + hreq_response(dd, HREQ_SUCCESS, 0); + break; + + case HREQ_INTERFACE_TEST: + hreq_response(dd, HREQ_SUCCESS, data); + break; + + default: + dd_dev_err(dd, "8051 request: unknown request 0x%x\n", type); + hreq_response(dd, HREQ_NOT_SUPPORTED, 0); + break; + } +} + +static void write_global_credit(struct hfi1_devdata *dd, + u8 vau, u16 total, u16 shared) +{ + write_csr(dd, SEND_CM_GLOBAL_CREDIT, + ((u64)total + << SEND_CM_GLOBAL_CREDIT_TOTAL_CREDIT_LIMIT_SHIFT) + | ((u64)shared + << SEND_CM_GLOBAL_CREDIT_SHARED_LIMIT_SHIFT) + | ((u64)vau << SEND_CM_GLOBAL_CREDIT_AU_SHIFT)); +} + +/* + * Set up initial VL15 credits of the remote. Assumes the rest of + * the CM credit registers are zero from a previous global or credit reset . + */ +void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf) +{ + /* leave shared count at zero for both global and VL15 */ + write_global_credit(dd, vau, vl15buf, 0); + write_csr(dd, SEND_CM_CREDIT_VL15, (u64)vl15buf + << SEND_CM_CREDIT_VL15_DEDICATED_LIMIT_VL_SHIFT); +} + +/* + * Zero all credit details from the previous connection and + * reset the CM manager's internal counters. + */ +void reset_link_credits(struct hfi1_devdata *dd) +{ + int i; + + /* remove all previous VL credit limits */ + for (i = 0; i < TXE_NUM_DATA_VL; i++) + write_csr(dd, SEND_CM_CREDIT_VL + (8*i), 0); + write_csr(dd, SEND_CM_CREDIT_VL15, 0); + write_global_credit(dd, 0, 0, 0); + /* reset the CM block */ + pio_send_control(dd, PSC_CM_RESET); +} + +/* convert a vCU to a CU */ +static u32 vcu_to_cu(u8 vcu) +{ + return 1 << vcu; +} + +/* convert a CU to a vCU */ +static u8 cu_to_vcu(u32 cu) +{ + return ilog2(cu); +} + +/* convert a vAU to an AU */ +static u32 vau_to_au(u8 vau) +{ + return 8 * (1 << vau); +} + +static void set_linkup_defaults(struct hfi1_pportdata *ppd) +{ + ppd->sm_trap_qp = 0x0; + ppd->sa_qp = 0x1; +} + +/* + * Graceful LCB shutdown. This leaves the LCB FIFOs in reset. + */ +static void lcb_shutdown(struct hfi1_devdata *dd, int abort) +{ + u64 reg; + + /* clear lcb run: LCB_CFG_RUN.EN = 0 */ + write_csr(dd, DC_LCB_CFG_RUN, 0); + /* set tx fifo reset: LCB_CFG_TX_FIFOS_RESET.VAL = 1 */ + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, + 1ull << DC_LCB_CFG_TX_FIFOS_RESET_VAL_SHIFT); + /* set dcc reset csr: DCC_CFG_RESET.{reset_lcb,reset_rx_fpe} = 1 */ + dd->lcb_err_en = read_csr(dd, DC_LCB_ERR_EN); + reg = read_csr(dd, DCC_CFG_RESET); + write_csr(dd, DCC_CFG_RESET, + reg + | (1ull << DCC_CFG_RESET_RESET_LCB_SHIFT) + | (1ull << DCC_CFG_RESET_RESET_RX_FPE_SHIFT)); + (void) read_csr(dd, DCC_CFG_RESET); /* make sure the write completed */ + if (!abort) { + udelay(1); /* must hold for the longer of 16cclks or 20ns */ + write_csr(dd, DCC_CFG_RESET, reg); + write_csr(dd, DC_LCB_ERR_EN, dd->lcb_err_en); + } +} + +/* + * This routine should be called after the link has been transitioned to + * OFFLINE (OFFLINE state has the side effect of putting the SerDes into + * reset). + * + * The expectation is that the caller of this routine would have taken + * care of properly transitioning the link into the correct state. + */ +static void dc_shutdown(struct hfi1_devdata *dd) +{ + unsigned long flags; + + spin_lock_irqsave(&dd->dc8051_lock, flags); + if (dd->dc_shutdown) { + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + return; + } + dd->dc_shutdown = 1; + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + /* Shutdown the LCB */ + lcb_shutdown(dd, 1); + /* Going to OFFLINE would have causes the 8051 to put the + * SerDes into reset already. Just need to shut down the 8051, + * itself. */ + write_csr(dd, DC_DC8051_CFG_RST, 0x1); +} + +/* Calling this after the DC has been brought out of reset should not + * do any damage. */ +static void dc_start(struct hfi1_devdata *dd) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&dd->dc8051_lock, flags); + if (!dd->dc_shutdown) + goto done; + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + /* Take the 8051 out of reset */ + write_csr(dd, DC_DC8051_CFG_RST, 0ull); + /* Wait until 8051 is ready */ + ret = wait_fm_ready(dd, TIMEOUT_8051_START); + if (ret) { + dd_dev_err(dd, "%s: timeout starting 8051 firmware\n", + __func__); + } + /* Take away reset for LCB and RX FPE (set in lcb_shutdown). */ + write_csr(dd, DCC_CFG_RESET, 0x10); + /* lcb_shutdown() with abort=1 does not restore these */ + write_csr(dd, DC_LCB_ERR_EN, dd->lcb_err_en); + spin_lock_irqsave(&dd->dc8051_lock, flags); + dd->dc_shutdown = 0; +done: + spin_unlock_irqrestore(&dd->dc8051_lock, flags); +} + +/* + * These LCB adjustments are for the Aurora SerDes core in the FPGA. + */ +static void adjust_lcb_for_fpga_serdes(struct hfi1_devdata *dd) +{ + u64 rx_radr, tx_radr; + u32 version; + + if (dd->icode != ICODE_FPGA_EMULATION) + return; + + /* + * These LCB defaults on emulator _s are good, nothing to do here: + * LCB_CFG_TX_FIFOS_RADR + * LCB_CFG_RX_FIFOS_RADR + * LCB_CFG_LN_DCLK + * LCB_CFG_IGNORE_LOST_RCLK + */ + if (is_emulator_s(dd)) + return; + /* else this is _p */ + + version = emulator_rev(dd); + if (!is_a0(dd)) + version = 0x2d; /* all B0 use 0x2d or higher settings */ + + if (version <= 0x12) { + /* release 0x12 and below */ + + /* + * LCB_CFG_RX_FIFOS_RADR.RST_VAL = 0x9 + * LCB_CFG_RX_FIFOS_RADR.OK_TO_JUMP_VAL = 0x9 + * LCB_CFG_RX_FIFOS_RADR.DO_NOT_JUMP_VAL = 0xa + */ + rx_radr = + 0xaull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + /* + * LCB_CFG_TX_FIFOS_RADR.ON_REINIT = 0 (default) + * LCB_CFG_TX_FIFOS_RADR.RST_VAL = 6 + */ + tx_radr = 6ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + } else if (version <= 0x18) { + /* release 0x13 up to 0x18 */ + /* LCB_CFG_RX_FIFOS_RADR = 0x988 */ + rx_radr = + 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + tx_radr = 7ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + } else if (version == 0x19) { + /* release 0x19 */ + /* LCB_CFG_RX_FIFOS_RADR = 0xa99 */ + rx_radr = + 0xAull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + tx_radr = 3ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + } else if (version == 0x1a) { + /* release 0x1a */ + /* LCB_CFG_RX_FIFOS_RADR = 0x988 */ + rx_radr = + 0x9ull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + tx_radr = 7ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + write_csr(dd, DC_LCB_CFG_LN_DCLK, 1ull); + } else { + /* release 0x1b and higher */ + /* LCB_CFG_RX_FIFOS_RADR = 0x877 */ + rx_radr = + 0x8ull << DC_LCB_CFG_RX_FIFOS_RADR_DO_NOT_JUMP_VAL_SHIFT + | 0x7ull << DC_LCB_CFG_RX_FIFOS_RADR_OK_TO_JUMP_VAL_SHIFT + | 0x7ull << DC_LCB_CFG_RX_FIFOS_RADR_RST_VAL_SHIFT; + tx_radr = 3ull << DC_LCB_CFG_TX_FIFOS_RADR_RST_VAL_SHIFT; + } + + write_csr(dd, DC_LCB_CFG_RX_FIFOS_RADR, rx_radr); + /* LCB_CFG_IGNORE_LOST_RCLK.EN = 1 */ + write_csr(dd, DC_LCB_CFG_IGNORE_LOST_RCLK, + DC_LCB_CFG_IGNORE_LOST_RCLK_EN_SMASK); + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RADR, tx_radr); +} + +/* + * Handle a SMA idle message + * + * This is a work-queue function outside of the interrupt. + */ +void handle_sma_message(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + sma_message_work); + struct hfi1_devdata *dd = ppd->dd; + u64 msg; + int ret; + + /* msg is bytes 1-4 of the 40-bit idle message - the command code + is stripped off */ + ret = read_idle_sma(dd, &msg); + if (ret) + return; + dd_dev_info(dd, "%s: SMA message 0x%llx\n", __func__, msg); + /* + * React to the SMA message. Byte[1] (0 for us) is the command. + */ + switch (msg & 0xff) { + case SMA_IDLE_ARM: + /* + * See OPAv1 table 9-14 - HFI and External Switch Ports Key + * State Transitions + * + * Only expected in INIT or ARMED, discard otherwise. + */ + if (ppd->host_link_state & (HLS_UP_INIT | HLS_UP_ARMED)) + ppd->neighbor_normal = 1; + break; + case SMA_IDLE_ACTIVE: + /* + * See OPAv1 table 9-14 - HFI and External Switch Ports Key + * State Transitions + * + * Can activate the node. Discard otherwise. + */ + if (ppd->host_link_state == HLS_UP_ARMED + && ppd->is_active_optimize_enabled) { + ppd->neighbor_normal = 1; + ret = set_link_state(ppd, HLS_UP_ACTIVE); + if (ret) + dd_dev_err( + dd, + "%s: received Active SMA idle message, couldn't set link to Active\n", + __func__); + } + break; + default: + dd_dev_err(dd, + "%s: received unexpected SMA idle message 0x%llx\n", + __func__, msg); + break; + } +} + +static void adjust_rcvctrl(struct hfi1_devdata *dd, u64 add, u64 clear) +{ + u64 rcvctrl; + unsigned long flags; + + spin_lock_irqsave(&dd->rcvctrl_lock, flags); + rcvctrl = read_csr(dd, RCV_CTRL); + rcvctrl |= add; + rcvctrl &= ~clear; + write_csr(dd, RCV_CTRL, rcvctrl); + spin_unlock_irqrestore(&dd->rcvctrl_lock, flags); +} + +static inline void add_rcvctrl(struct hfi1_devdata *dd, u64 add) +{ + adjust_rcvctrl(dd, add, 0); +} + +static inline void clear_rcvctrl(struct hfi1_devdata *dd, u64 clear) +{ + adjust_rcvctrl(dd, 0, clear); +} + +/* + * Called from all interrupt handlers to start handling an SPC freeze. + */ +void start_freeze_handling(struct hfi1_pportdata *ppd, int flags) +{ + struct hfi1_devdata *dd = ppd->dd; + struct send_context *sc; + int i; + + if (flags & FREEZE_SELF) + write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_FREEZE_SMASK); + + /* enter frozen mode */ + dd->flags |= HFI1_FROZEN; + + /* notify all SDMA engines that they are going into a freeze */ + sdma_freeze_notify(dd, !!(flags & FREEZE_LINK_DOWN)); + + /* do halt pre-handling on all enabled send contexts */ + for (i = 0; i < dd->num_send_contexts; i++) { + sc = dd->send_contexts[i].sc; + if (sc && (sc->flags & SCF_ENABLED)) + sc_stop(sc, SCF_FROZEN | SCF_HALTED); + } + + /* Send context are frozen. Notify user space */ + hfi1_set_uevent_bits(ppd, _HFI1_EVENT_FROZEN_BIT); + + if (flags & FREEZE_ABORT) { + dd_dev_err(dd, + "Aborted freeze recovery. Please REBOOT system\n"); + return; + } + /* queue non-interrupt handler */ + queue_work(ppd->hfi1_wq, &ppd->freeze_work); +} + +/* + * Wait until all 4 sub-blocks indicate that they have frozen or unfrozen, + * depending on the "freeze" parameter. + * + * No need to return an error if it times out, our only option + * is to proceed anyway. + */ +static void wait_for_freeze_status(struct hfi1_devdata *dd, int freeze) +{ + unsigned long timeout; + u64 reg; + + timeout = jiffies + msecs_to_jiffies(FREEZE_STATUS_TIMEOUT); + while (1) { + reg = read_csr(dd, CCE_STATUS); + if (freeze) { + /* waiting until all indicators are set */ + if ((reg & ALL_FROZE) == ALL_FROZE) + return; /* all done */ + } else { + /* waiting until all indicators are clear */ + if ((reg & ALL_FROZE) == 0) + return; /* all done */ + } + + if (time_after(jiffies, timeout)) { + dd_dev_err(dd, + "Time out waiting for SPC %sfreeze, bits 0x%llx, expecting 0x%llx, continuing", + freeze ? "" : "un", + reg & ALL_FROZE, + freeze ? ALL_FROZE : 0ull); + return; + } + usleep_range(80, 120); + } +} + +/* + * Do all freeze handling for the RXE block. + */ +static void rxe_freeze(struct hfi1_devdata *dd) +{ + int i; + + /* disable port */ + clear_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); + + /* disable all receive contexts */ + for (i = 0; i < dd->num_rcv_contexts; i++) + hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_DIS, i); +} + +/* + * Unfreeze handling for the RXE block - kernel contexts only. + * This will also enable the port. User contexts will do unfreeze + * handling on a per-context basis as they call into the driver. + * + */ +static void rxe_kernel_unfreeze(struct hfi1_devdata *dd) +{ + int i; + + /* enable all kernel contexts */ + for (i = 0; i < dd->n_krcv_queues; i++) + hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_ENB, i); + + /* enable port */ + add_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); +} + +/* + * Non-interrupt SPC freeze handling. + * + * This is a work-queue function outside of the triggering interrupt. + */ +void handle_freeze(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + freeze_work); + struct hfi1_devdata *dd = ppd->dd; + + /* wait for freeze indicators on all affected blocks */ + dd_dev_info(dd, "Entering SPC freeze\n"); + wait_for_freeze_status(dd, 1); + + /* SPC is now frozen */ + + /* do send PIO freeze steps */ + pio_freeze(dd); + + /* do send DMA freeze steps */ + sdma_freeze(dd); + + /* do send egress freeze steps - nothing to do */ + + /* do receive freeze steps */ + rxe_freeze(dd); + + /* + * Unfreeze the hardware - clear the freeze, wait for each + * block's frozen bit to clear, then clear the frozen flag. + */ + write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_UNFREEZE_SMASK); + wait_for_freeze_status(dd, 0); + + if (is_a0(dd)) { + write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_FREEZE_SMASK); + wait_for_freeze_status(dd, 1); + write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_UNFREEZE_SMASK); + wait_for_freeze_status(dd, 0); + } + + /* do send PIO unfreeze steps for kernel contexts */ + pio_kernel_unfreeze(dd); + + /* do send DMA unfreeze steps */ + sdma_unfreeze(dd); + + /* do send egress unfreeze steps - nothing to do */ + + /* do receive unfreeze steps for kernel contexts */ + rxe_kernel_unfreeze(dd); + + /* + * The unfreeze procedure touches global device registers when + * it disables and re-enables RXE. Mark the device unfrozen + * after all that is done so other parts of the driver waiting + * for the device to unfreeze don't do things out of order. + * + * The above implies that the meaning of HFI1_FROZEN flag is + * "Device has gone into freeze mode and freeze mode handling + * is still in progress." + * + * The flag will be removed when freeze mode processing has + * completed. + */ + dd->flags &= ~HFI1_FROZEN; + wake_up(&dd->event_queue); + + /* no longer frozen */ + dd_dev_err(dd, "Exiting SPC freeze\n"); +} + +/* + * Handle a link up interrupt from the 8051. + * + * This is a work-queue function outside of the interrupt. + */ +void handle_link_up(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_up_work); + set_link_state(ppd, HLS_UP_INIT); + + /* cache the read of DC_LCB_STS_ROUND_TRIP_LTP_CNT */ + read_ltp_rtt(ppd->dd); + /* + * OPA specifies that certain counters are cleared on a transition + * to link up, so do that. + */ + clear_linkup_counters(ppd->dd); + /* + * And (re)set link up default values. + */ + set_linkup_defaults(ppd); + + /* enforce link speed enabled */ + if ((ppd->link_speed_active & ppd->link_speed_enabled) == 0) { + /* oops - current speed is not enabled, bounce */ + dd_dev_err(ppd->dd, + "Link speed active 0x%x is outside enabled 0x%x, downing link\n", + ppd->link_speed_active, ppd->link_speed_enabled); + set_link_down_reason(ppd, OPA_LINKDOWN_REASON_SPEED_POLICY, 0, + OPA_LINKDOWN_REASON_SPEED_POLICY); + set_link_state(ppd, HLS_DN_OFFLINE); + start_link(ppd); + } +} + +/* + * Handle a link down interrupt from the 8051. + * + * This is a work-queue function outside of the interrupt. + */ +void handle_link_down(struct work_struct *work) +{ + u8 lcl_reason, neigh_reason = 0; + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_down_work); + lcl_reason = 0; + + read_planned_down_reason_code(ppd->dd, &neigh_reason); + + /* + * If no reason, assume peer-initiated but missed + * LinkGoingDown idle flits. + */ + if (neigh_reason == 0) + lcl_reason = OPA_LINKDOWN_REASON_NEIGHBOR_UNKNOWN; + + set_link_down_reason(ppd, lcl_reason, neigh_reason, 0); + set_link_state(ppd, HLS_DN_OFFLINE); + + /* disable the port */ + clear_rcvctrl(ppd->dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); + + /* If there is no cable attached, turn the DC off. Otherwise, + * start the link bring up. */ + if (!qsfp_mod_present(ppd)) + dc_shutdown(ppd->dd); + else + start_link(ppd); +} + +/* + * Mask conversion: Capability exchange to Port LTP. The capability + * exchange has an implicit 16b CRC that is mandatory. + */ +static int cap_to_port_ltp(int cap) +{ + int port_ltp = PORT_LTP_CRC_MODE_16; /* this mode is mandatory */ + + if (cap & CAP_CRC_14B) + port_ltp |= PORT_LTP_CRC_MODE_14; + if (cap & CAP_CRC_48B) + port_ltp |= PORT_LTP_CRC_MODE_48; + if (cap & CAP_CRC_12B_16B_PER_LANE) + port_ltp |= PORT_LTP_CRC_MODE_PER_LANE; + + return port_ltp; +} + +/* + * Convert an OPA Port LTP mask to capability mask + */ +int port_ltp_to_cap(int port_ltp) +{ + int cap_mask = 0; + + if (port_ltp & PORT_LTP_CRC_MODE_14) + cap_mask |= CAP_CRC_14B; + if (port_ltp & PORT_LTP_CRC_MODE_48) + cap_mask |= CAP_CRC_48B; + if (port_ltp & PORT_LTP_CRC_MODE_PER_LANE) + cap_mask |= CAP_CRC_12B_16B_PER_LANE; + + return cap_mask; +} + +/* + * Convert a single DC LCB CRC mode to an OPA Port LTP mask. + */ +static int lcb_to_port_ltp(int lcb_crc) +{ + int port_ltp = 0; + + if (lcb_crc == LCB_CRC_12B_16B_PER_LANE) + port_ltp = PORT_LTP_CRC_MODE_PER_LANE; + else if (lcb_crc == LCB_CRC_48B) + port_ltp = PORT_LTP_CRC_MODE_48; + else if (lcb_crc == LCB_CRC_14B) + port_ltp = PORT_LTP_CRC_MODE_14; + else + port_ltp = PORT_LTP_CRC_MODE_16; + + return port_ltp; +} + +static int neigh_is_hfi(struct hfi1_pportdata *ppd) +{ + return (ppd->neighbor_type & OPA_PI_MASK_NEIGH_NODE_TYPE) == 0; +} + +/* + * Our neighbor has indicated that we are allowed to act as a fabric + * manager, so place the full management partition key in the second + * (0-based) pkey array position (see OPAv1, section 20.2.2.6.8). Note + * that we should already have the limited management partition key in + * array element 1, and also that the port is not yet up when + * add_full_mgmt_pkey() is invoked. + */ +static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + + /* Sanity check - ppd->pkeys[2] should be 0 */ + if (ppd->pkeys[2] != 0) + dd_dev_err(dd, "%s pkey[2] already set to 0x%x, resetting it to 0x%x\n", + __func__, ppd->pkeys[2], FULL_MGMT_P_KEY); + ppd->pkeys[2] = FULL_MGMT_P_KEY; + (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0); +} + +/* + * Convert the given link width to the OPA link width bitmask. + */ +static u16 link_width_to_bits(struct hfi1_devdata *dd, u16 width) +{ + switch (width) { + case 1: return OPA_LINK_WIDTH_1X; + case 2: return OPA_LINK_WIDTH_2X; + case 3: return OPA_LINK_WIDTH_3X; + default: + /* NOTE: 0 in simulation */ + dd_dev_info(dd, "%s: invalid width %d, using 4\n", + __func__, width); + /* fall through */ + case 4: return OPA_LINK_WIDTH_4X; + } +} + +/* + * Do a population count on the bottom nibble. + */ +static const u8 bit_counts[16] = { + 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4 +}; +static inline u8 nibble_to_count(u8 nibble) +{ + return bit_counts[nibble & 0xf]; +} + +/* + * Read the active lane information from the 8051 registers and return + * their widths. + * + * Active lane information is found in these 8051 registers: + * enable_lane_tx + * enable_lane_rx + */ +static void get_link_widths(struct hfi1_devdata *dd, u16 *tx_width, + u16 *rx_width) +{ + u16 tx, rx; + u8 enable_lane_rx; + u8 enable_lane_tx; + u8 tx_polarity_inversion; + u8 rx_polarity_inversion; + u8 max_rate; + + /* read the active lanes */ + read_tx_settings(dd, &enable_lane_tx, &tx_polarity_inversion, + &rx_polarity_inversion, &max_rate); + read_local_lni(dd, &enable_lane_rx); + + /* convert to counts */ + tx = nibble_to_count(enable_lane_tx); + rx = nibble_to_count(enable_lane_rx); + + /* + * Remove the setting of link_speed_active in this routine + * when the 8051 firmware is using the "real" LNI and not the + * "engineering" LNI. + * + * Set link_speed_active here, overriding what was set in + * handle_verify_cap(). This is because the 8051 firmware using + * the "engineering" LNI does not correctly set the max_speed field. + * For now, to find the speed, look at max_rate after link up. This + * routine is called in handle_verify_cap(),after linkup, and during + * a downgrade. max_rate should not change after linkup so + * re-setting link_speed_active here should not matter. + */ + if (dd->icode == ICODE_RTL_SILICON) { + /* max_rate: 0 = 12.5G, 1 = 25G */ + switch (max_rate) { + case 0: + dd->pport[0].link_speed_active = OPA_LINK_SPEED_12_5G; + break; + default: + dd_dev_err(dd, + "%s: unexpected max rate %d, using 25Gb\n", + __func__, (int)max_rate); + /* fall through */ + case 1: + dd->pport[0].link_speed_active = OPA_LINK_SPEED_25G; + break; + } + } + + dd_dev_info(dd, + "Fabric active lanes (width): tx 0x%x (%d), rx 0x%x (%d)\n", + enable_lane_tx, tx, enable_lane_rx, rx); + *tx_width = link_width_to_bits(dd, tx); + *rx_width = link_width_to_bits(dd, rx); +} + +/* + * Read verify_cap_local_fm_link_width[1] to obtain the link widths. + * Valid after the end of VerifyCap and during LinkUp. Does not change + * after link up. I.e. look elsewhere for downgrade information. + * + * Bits are: + * + bits [7:4] contain the number of active transmitters + * + bits [3:0] contain the number of active receivers + * These are numbers 1 through 4 and can be different values if the + * link is asymmetric. + * + * verify_cap_local_fm_link_width[0] retains its original value. + */ +static void get_linkup_widths(struct hfi1_devdata *dd, u16 *tx_width, + u16 *rx_width) +{ + u16 widths, tx, rx; + u8 misc_bits, local_flags; + u16 active_tx, active_rx; + + read_vc_local_link_width(dd, &misc_bits, &local_flags, &widths); + tx = widths >> 12; + rx = (widths >> 8) & 0xf; + dd_dev_info(dd, "%s: active tx %d, active rx %d\n", __func__, tx, rx); + + *tx_width = link_width_to_bits(dd, tx); + *rx_width = link_width_to_bits(dd, rx); + + /* print the active widths */ + get_link_widths(dd, &active_tx, &active_rx); +} + +/* + * Set ppd->link_width_active and ppd->link_width_downgrade_active using + * hardware information when the link first comes up. + * + * The link width is not available until after VerifyCap.AllFramesReceived + * (the trigger for handle_verify_cap), so this is outside that routine + * and should be called when the 8051 signals linkup. + */ +void get_linkup_link_widths(struct hfi1_pportdata *ppd) +{ + u16 tx_width, rx_width; + + /* get end-of-LNI link widths */ + get_linkup_widths(ppd->dd, &tx_width, &rx_width); + + /* use tx_width as the link is supposed to be symmetric on link up */ + ppd->link_width_active = tx_width; + /* link width downgrade active (LWD.A) starts out matching LW.A */ + ppd->link_width_downgrade_tx_active = ppd->link_width_active; + ppd->link_width_downgrade_rx_active = ppd->link_width_active; + /* per OPA spec, on link up LWD.E resets to LWD.S */ + ppd->link_width_downgrade_enabled = ppd->link_width_downgrade_supported; + /* cache the active egress rate (units {10^6 bits/sec]) */ + ppd->current_egress_rate = active_egress_rate(ppd); +} + +/* + * Handle a verify capabilities interrupt from the 8051. + * + * This is a work-queue function outside of the interrupt. + */ +void handle_verify_cap(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_vc_work); + struct hfi1_devdata *dd = ppd->dd; + u64 reg; + u8 power_management; + u8 continious; + u8 vcu; + u8 vau; + u8 z; + u16 vl15buf; + u16 link_widths; + u16 crc_mask; + u16 crc_val; + u16 device_id; + u16 active_tx, active_rx; + u8 partner_supported_crc; + u8 remote_tx_rate; + u8 device_rev; + + set_link_state(ppd, HLS_VERIFY_CAP); + + lcb_shutdown(dd, 0); + adjust_lcb_for_fpga_serdes(dd); + + /* + * These are now valid: + * remote VerifyCap fields in the general LNI config + * CSR DC8051_STS_REMOTE_GUID + * CSR DC8051_STS_REMOTE_NODE_TYPE + * CSR DC8051_STS_REMOTE_FM_SECURITY + */ + read_vc_remote_phy(dd, &power_management, &continious); + read_vc_remote_fabric( + dd, + &vau, + &z, + &vcu, + &vl15buf, + &partner_supported_crc); + read_vc_remote_link_width(dd, &remote_tx_rate, &link_widths); + read_remote_device_id(dd, &device_id, &device_rev); + /* + * And the 'MgmtAllowed' information, which is exchanged during + * LNI, is also be available at this point. + */ + read_mgmt_allowed(dd, &ppd->mgmt_allowed); + /* print the active widths */ + get_link_widths(dd, &active_tx, &active_rx); + dd_dev_info(dd, + "Peer PHY: power management 0x%x, continuous updates 0x%x\n", + (int)power_management, (int)continious); + dd_dev_info(dd, + "Peer Fabric: vAU %d, Z %d, vCU %d, vl15 credits 0x%x, CRC sizes 0x%x\n", + (int)vau, + (int)z, + (int)vcu, + (int)vl15buf, + (int)partner_supported_crc); + dd_dev_info(dd, "Peer Link Width: tx rate 0x%x, widths 0x%x\n", + (u32)remote_tx_rate, (u32)link_widths); + dd_dev_info(dd, "Peer Device ID: 0x%04x, Revision 0x%02x\n", + (u32)device_id, (u32)device_rev); + /* + * The peer vAU value just read is the peer receiver value. HFI does + * not support a transmit vAU of 0 (AU == 8). We advertised that + * with Z=1 in the fabric capabilities sent to the peer. The peer + * will see our Z=1, and, if it advertised a vAU of 0, will move its + * receive to vAU of 1 (AU == 16). Do the same here. We do not care + * about the peer Z value - our sent vAU is 3 (hardwired) and is not + * subject to the Z value exception. + */ + if (vau == 0) + vau = 1; + set_up_vl15(dd, vau, vl15buf); + + /* set up the LCB CRC mode */ + crc_mask = ppd->port_crc_mode_enabled & partner_supported_crc; + + /* order is important: use the lowest bit in common */ + if (crc_mask & CAP_CRC_14B) + crc_val = LCB_CRC_14B; + else if (crc_mask & CAP_CRC_48B) + crc_val = LCB_CRC_48B; + else if (crc_mask & CAP_CRC_12B_16B_PER_LANE) + crc_val = LCB_CRC_12B_16B_PER_LANE; + else + crc_val = LCB_CRC_16B; + + dd_dev_info(dd, "Final LCB CRC mode: %d\n", (int)crc_val); + write_csr(dd, DC_LCB_CFG_CRC_MODE, + (u64)crc_val << DC_LCB_CFG_CRC_MODE_TX_VAL_SHIFT); + + /* set (14b only) or clear sideband credit */ + reg = read_csr(dd, SEND_CM_CTRL); + if (crc_val == LCB_CRC_14B && crc_14b_sideband) { + write_csr(dd, SEND_CM_CTRL, + reg | SEND_CM_CTRL_FORCE_CREDIT_MODE_SMASK); + } else { + write_csr(dd, SEND_CM_CTRL, + reg & ~SEND_CM_CTRL_FORCE_CREDIT_MODE_SMASK); + } + + /* remote_tx_rate: 0 = 12.5G, 1 = 25G */ + switch (remote_tx_rate) { + case 0: + ppd->link_speed_active = OPA_LINK_SPEED_12_5G; + break; + default: + dd_dev_err(dd, "%s: unexpected remote tx rate %d, using 25Gb\n", + __func__, (int)remote_tx_rate); + /* fall through */ + case 1: + ppd->link_speed_active = OPA_LINK_SPEED_25G; + break; + } + + /* + * Cache the values of the supported, enabled, and active + * LTP CRC modes to return in 'portinfo' queries. But the bit + * flags that are returned in the portinfo query differ from + * what's in the link_crc_mask, crc_sizes, and crc_val + * variables. Convert these here. + */ + ppd->port_ltp_crc_mode = cap_to_port_ltp(link_crc_mask) << 8; + /* supported crc modes */ + ppd->port_ltp_crc_mode |= + cap_to_port_ltp(ppd->port_crc_mode_enabled) << 4; + /* enabled crc modes */ + ppd->port_ltp_crc_mode |= lcb_to_port_ltp(crc_val); + /* active crc mode */ + + /* set up the remote credit return table */ + assign_remote_cm_au_table(dd, vcu); + + /* + * The LCB is reset on entry to handle_verify_cap(), so this must + * be applied on every link up. + * + * Adjust LCB error kill enable to kill the link if + * these RBUF errors are seen: + * REPLAY_BUF_MBE_SMASK + * FLIT_INPUT_BUF_MBE_SMASK + */ + if (is_a0(dd)) { /* fixed in B0 */ + reg = read_csr(dd, DC_LCB_CFG_LINK_KILL_EN); + reg |= DC_LCB_CFG_LINK_KILL_EN_REPLAY_BUF_MBE_SMASK + | DC_LCB_CFG_LINK_KILL_EN_FLIT_INPUT_BUF_MBE_SMASK; + write_csr(dd, DC_LCB_CFG_LINK_KILL_EN, reg); + } + + /* pull LCB fifos out of reset - all fifo clocks must be stable */ + write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0); + + /* give 8051 access to the LCB CSRs */ + write_csr(dd, DC_LCB_ERR_EN, 0); /* mask LCB errors */ + set_8051_lcb_access(dd); + + ppd->neighbor_guid = + cpu_to_be64(read_csr(dd, DC_DC8051_STS_REMOTE_GUID)); + ppd->neighbor_type = + read_csr(dd, DC_DC8051_STS_REMOTE_NODE_TYPE) & + DC_DC8051_STS_REMOTE_NODE_TYPE_VAL_MASK; + ppd->neighbor_fm_security = + read_csr(dd, DC_DC8051_STS_REMOTE_FM_SECURITY) & + DC_DC8051_STS_LOCAL_FM_SECURITY_DISABLED_MASK; + dd_dev_info(dd, "Neighbor Guid: %llx Neighbor type %d MgmtAllowed %d FM security bypass %d\n", + be64_to_cpu(ppd->neighbor_guid), ppd->neighbor_type, + ppd->mgmt_allowed, ppd->neighbor_fm_security); + if (neigh_is_hfi(ppd)) + ppd->part_enforce = + HFI1_PART_ENFORCE_IN | HFI1_PART_ENFORCE_OUT; + if (ppd->mgmt_allowed) + add_full_mgmt_pkey(ppd); + + /* tell the 8051 to go to LinkUp */ + set_link_state(ppd, HLS_GOING_UP); +} + +/* + * Apply the link width downgrade enabled policy against the current active + * link widths. + * + * Called when the enabled policy changes or the active link widths change. + */ +void apply_link_downgrade_policy(struct hfi1_pportdata *ppd, int refresh_widths) +{ + int skip = 1; + int do_bounce = 0; + u16 lwde = ppd->link_width_downgrade_enabled; + u16 tx, rx; + + mutex_lock(&ppd->hls_lock); + /* only apply if the link is up */ + if (ppd->host_link_state & HLS_UP) + skip = 0; + mutex_unlock(&ppd->hls_lock); + if (skip) + return; + + if (refresh_widths) { + get_link_widths(ppd->dd, &tx, &rx); + ppd->link_width_downgrade_tx_active = tx; + ppd->link_width_downgrade_rx_active = rx; + } + + if (lwde == 0) { + /* downgrade is disabled */ + + /* bounce if not at starting active width */ + if ((ppd->link_width_active != + ppd->link_width_downgrade_tx_active) + || (ppd->link_width_active != + ppd->link_width_downgrade_rx_active)) { + dd_dev_err(ppd->dd, + "Link downgrade is disabled and link has downgraded, downing link\n"); + dd_dev_err(ppd->dd, + " original 0x%x, tx active 0x%x, rx active 0x%x\n", + ppd->link_width_active, + ppd->link_width_downgrade_tx_active, + ppd->link_width_downgrade_rx_active); + do_bounce = 1; + } + } else if ((lwde & ppd->link_width_downgrade_tx_active) == 0 + || (lwde & ppd->link_width_downgrade_rx_active) == 0) { + /* Tx or Rx is outside the enabled policy */ + dd_dev_err(ppd->dd, + "Link is outside of downgrade allowed, downing link\n"); + dd_dev_err(ppd->dd, + " enabled 0x%x, tx active 0x%x, rx active 0x%x\n", + lwde, + ppd->link_width_downgrade_tx_active, + ppd->link_width_downgrade_rx_active); + do_bounce = 1; + } + + if (do_bounce) { + set_link_down_reason(ppd, OPA_LINKDOWN_REASON_WIDTH_POLICY, 0, + OPA_LINKDOWN_REASON_WIDTH_POLICY); + set_link_state(ppd, HLS_DN_OFFLINE); + start_link(ppd); + } +} + +/* + * Handle a link downgrade interrupt from the 8051. + * + * This is a work-queue function outside of the interrupt. + */ +void handle_link_downgrade(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + link_downgrade_work); + + dd_dev_info(ppd->dd, "8051: Link width downgrade\n"); + apply_link_downgrade_policy(ppd, 1); +} + +static char *dcc_err_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, dcc_err_flags, + ARRAY_SIZE(dcc_err_flags)); +} + +static char *lcb_err_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, lcb_err_flags, + ARRAY_SIZE(lcb_err_flags)); +} + +static char *dc8051_err_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, dc8051_err_flags, + ARRAY_SIZE(dc8051_err_flags)); +} + +static char *dc8051_info_err_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, dc8051_info_err_flags, + ARRAY_SIZE(dc8051_info_err_flags)); +} + +static char *dc8051_info_host_msg_string(char *buf, int buf_len, u64 flags) +{ + return flag_string(buf, buf_len, flags, dc8051_info_host_msg_flags, + ARRAY_SIZE(dc8051_info_host_msg_flags)); +} + +static void handle_8051_interrupt(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + struct hfi1_pportdata *ppd = dd->pport; + u64 info, err, host_msg; + int queue_link_down = 0; + char buf[96]; + + /* look at the flags */ + if (reg & DC_DC8051_ERR_FLG_SET_BY_8051_SMASK) { + /* 8051 information set by firmware */ + /* read DC8051_DBG_ERR_INFO_SET_BY_8051 for details */ + info = read_csr(dd, DC_DC8051_DBG_ERR_INFO_SET_BY_8051); + err = (info >> DC_DC8051_DBG_ERR_INFO_SET_BY_8051_ERROR_SHIFT) + & DC_DC8051_DBG_ERR_INFO_SET_BY_8051_ERROR_MASK; + host_msg = (info >> + DC_DC8051_DBG_ERR_INFO_SET_BY_8051_HOST_MSG_SHIFT) + & DC_DC8051_DBG_ERR_INFO_SET_BY_8051_HOST_MSG_MASK; + + /* + * Handle error flags. + */ + if (err & FAILED_LNI) { + /* + * LNI error indications are cleared by the 8051 + * only when starting polling. Only pay attention + * to them when in the states that occur during + * LNI. + */ + if (ppd->host_link_state + & (HLS_DN_POLL | HLS_VERIFY_CAP | HLS_GOING_UP)) { + queue_link_down = 1; + dd_dev_info(dd, "Link error: %s\n", + dc8051_info_err_string(buf, + sizeof(buf), + err & FAILED_LNI)); + } + err &= ~(u64)FAILED_LNI; + } + if (err) { + /* report remaining errors, but do not do anything */ + dd_dev_err(dd, "8051 info error: %s\n", + dc8051_info_err_string(buf, sizeof(buf), err)); + } + + /* + * Handle host message flags. + */ + if (host_msg & HOST_REQ_DONE) { + /* + * Presently, the driver does a busy wait for + * host requests to complete. This is only an + * informational message. + * NOTE: The 8051 clears the host message + * information *on the next 8051 command*. + * Therefore, when linkup is achieved, + * this flag will still be set. + */ + host_msg &= ~(u64)HOST_REQ_DONE; + } + if (host_msg & BC_SMA_MSG) { + queue_work(ppd->hfi1_wq, &ppd->sma_message_work); + host_msg &= ~(u64)BC_SMA_MSG; + } + if (host_msg & LINKUP_ACHIEVED) { + dd_dev_info(dd, "8051: Link up\n"); + queue_work(ppd->hfi1_wq, &ppd->link_up_work); + host_msg &= ~(u64)LINKUP_ACHIEVED; + } + if (host_msg & EXT_DEVICE_CFG_REQ) { + handle_8051_request(dd); + host_msg &= ~(u64)EXT_DEVICE_CFG_REQ; + } + if (host_msg & VERIFY_CAP_FRAME) { + queue_work(ppd->hfi1_wq, &ppd->link_vc_work); + host_msg &= ~(u64)VERIFY_CAP_FRAME; + } + if (host_msg & LINK_GOING_DOWN) { + const char *extra = ""; + /* no downgrade action needed if going down */ + if (host_msg & LINK_WIDTH_DOWNGRADED) { + host_msg &= ~(u64)LINK_WIDTH_DOWNGRADED; + extra = " (ignoring downgrade)"; + } + dd_dev_info(dd, "8051: Link down%s\n", extra); + queue_link_down = 1; + host_msg &= ~(u64)LINK_GOING_DOWN; + } + if (host_msg & LINK_WIDTH_DOWNGRADED) { + queue_work(ppd->hfi1_wq, &ppd->link_downgrade_work); + host_msg &= ~(u64)LINK_WIDTH_DOWNGRADED; + } + if (host_msg) { + /* report remaining messages, but do not do anything */ + dd_dev_info(dd, "8051 info host message: %s\n", + dc8051_info_host_msg_string(buf, sizeof(buf), + host_msg)); + } + + reg &= ~DC_DC8051_ERR_FLG_SET_BY_8051_SMASK; + } + if (reg & DC_DC8051_ERR_FLG_LOST_8051_HEART_BEAT_SMASK) { + /* + * Lost the 8051 heartbeat. If this happens, we + * receive constant interrupts about it. Disable + * the interrupt after the first. + */ + dd_dev_err(dd, "Lost 8051 heartbeat\n"); + write_csr(dd, DC_DC8051_ERR_EN, + read_csr(dd, DC_DC8051_ERR_EN) + & ~DC_DC8051_ERR_EN_LOST_8051_HEART_BEAT_SMASK); + + reg &= ~DC_DC8051_ERR_FLG_LOST_8051_HEART_BEAT_SMASK; + } + if (reg) { + /* report the error, but do not do anything */ + dd_dev_err(dd, "8051 error: %s\n", + dc8051_err_string(buf, sizeof(buf), reg)); + } + + if (queue_link_down) { + /* if the link is already going down or disabled, do not + * queue another */ + if ((ppd->host_link_state + & (HLS_GOING_OFFLINE|HLS_LINK_COOLDOWN)) + || ppd->link_enabled == 0) { + dd_dev_info(dd, "%s: not queuing link down\n", + __func__); + } else { + queue_work(ppd->hfi1_wq, &ppd->link_down_work); + } + } +} + +static const char * const fm_config_txt[] = { +[0] = + "BadHeadDist: Distance violation between two head flits", +[1] = + "BadTailDist: Distance violation between two tail flits", +[2] = + "BadCtrlDist: Distance violation between two credit control flits", +[3] = + "BadCrdAck: Credits return for unsupported VL", +[4] = + "UnsupportedVLMarker: Received VL Marker", +[5] = + "BadPreempt: Exceeded the preemption nesting level", +[6] = + "BadControlFlit: Received unsupported control flit", +/* no 7 */ +[8] = + "UnsupportedVLMarker: Received VL Marker for unconfigured or disabled VL", +}; + +static const char * const port_rcv_txt[] = { +[1] = + "BadPktLen: Illegal PktLen", +[2] = + "PktLenTooLong: Packet longer than PktLen", +[3] = + "PktLenTooShort: Packet shorter than PktLen", +[4] = + "BadSLID: Illegal SLID (0, using multicast as SLID, does not include security validation of SLID)", +[5] = + "BadDLID: Illegal DLID (0, doesn't match HFI)", +[6] = + "BadL2: Illegal L2 opcode", +[7] = + "BadSC: Unsupported SC", +[9] = + "BadRC: Illegal RC", +[11] = + "PreemptError: Preempting with same VL", +[12] = + "PreemptVL15: Preempting a VL15 packet", +[13] = + "BadVLMarker: VL Marker for an unpreempted VL", +}; + +#define OPA_LDR_FMCONFIG_OFFSET 16 +#define OPA_LDR_PORTRCV_OFFSET 0 +static void handle_dcc_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + u64 info, hdr0, hdr1; + const char *extra; + char buf[96]; + struct hfi1_pportdata *ppd = dd->pport; + u8 lcl_reason = 0; + int do_bounce = 0; + + if (reg & DCC_ERR_FLG_UNCORRECTABLE_ERR_SMASK) { + if (!(dd->err_info_uncorrectable & OPA_EI_STATUS_SMASK)) { + info = read_csr(dd, DCC_ERR_INFO_UNCORRECTABLE); + dd->err_info_uncorrectable = info & OPA_EI_CODE_SMASK; + /* set status bit */ + dd->err_info_uncorrectable |= OPA_EI_STATUS_SMASK; + } + reg &= ~DCC_ERR_FLG_UNCORRECTABLE_ERR_SMASK; + } + + if (reg & DCC_ERR_FLG_LINK_ERR_SMASK) { + struct hfi1_pportdata *ppd = dd->pport; + /* this counter saturates at (2^32) - 1 */ + if (ppd->link_downed < (u32)UINT_MAX) + ppd->link_downed++; + reg &= ~DCC_ERR_FLG_LINK_ERR_SMASK; + } + + if (reg & DCC_ERR_FLG_FMCONFIG_ERR_SMASK) { + u8 reason_valid = 1; + + info = read_csr(dd, DCC_ERR_INFO_FMCONFIG); + if (!(dd->err_info_fmconfig & OPA_EI_STATUS_SMASK)) { + dd->err_info_fmconfig = info & OPA_EI_CODE_SMASK; + /* set status bit */ + dd->err_info_fmconfig |= OPA_EI_STATUS_SMASK; + } + switch (info) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + extra = fm_config_txt[info]; + break; + case 8: + extra = fm_config_txt[info]; + if (!do_bounce && ppd->port_error_action & + OPA_PI_MASK_FM_CFG_UNSUPPORTED_VL_MARKER) { + do_bounce = 1; + /* + * lcl_reason cannot be derived from info + * for this error + */ + lcl_reason = + OPA_LINKDOWN_REASON_UNSUPPORTED_VL_MARKER; + } + break; + default: + reason_valid = 0; + snprintf(buf, sizeof(buf), "reserved%lld", info); + extra = buf; + break; + } + + if (reason_valid && !do_bounce) { + do_bounce = ppd->port_error_action & + (1 << (OPA_LDR_FMCONFIG_OFFSET + info)); + lcl_reason = (lcl_reason ? lcl_reason : + info + OPA_LINKDOWN_REASON_BAD_HEAD_DIST); + } + + /* just report this */ + dd_dev_info(dd, "DCC Error: fmconfig error: %s\n", extra); + reg &= ~DCC_ERR_FLG_FMCONFIG_ERR_SMASK; + } + + if (reg & DCC_ERR_FLG_RCVPORT_ERR_SMASK) { + u8 reason_valid = 1; + + info = read_csr(dd, DCC_ERR_INFO_PORTRCV); + hdr0 = read_csr(dd, DCC_ERR_INFO_PORTRCV_HDR0); + hdr1 = read_csr(dd, DCC_ERR_INFO_PORTRCV_HDR1); + if (!(dd->err_info_rcvport.status_and_code & + OPA_EI_STATUS_SMASK)) { + dd->err_info_rcvport.status_and_code = + info & OPA_EI_CODE_SMASK; + /* set status bit */ + dd->err_info_rcvport.status_and_code |= + OPA_EI_STATUS_SMASK; + /* save first 2 flits in the packet that caused + * the error */ + dd->err_info_rcvport.packet_flit1 = hdr0; + dd->err_info_rcvport.packet_flit2 = hdr1; + } + switch (info & 0xf) { + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + case 7: + case 9: + case 11: + case 12: + case 13: + extra = port_rcv_txt[info & 0xf]; + break; + default: + reason_valid = 0; + snprintf(buf, sizeof(buf), "reserved%lld", info); + extra = buf; + break; + } + + if (reason_valid && !do_bounce) { + do_bounce = ppd->port_error_action & + (1 << ((info & 0xf) + OPA_LDR_PORTRCV_OFFSET)); + lcl_reason = + (info & 0xf) + OPA_LINKDOWN_REASON_RCV_ERROR_0; + } + + /* just report this */ + dd_dev_info(dd, "DCC Error: PortRcv error: %s\n", extra); + dd_dev_info(dd, " hdr0 0x%llx, hdr1 0x%llx\n", + hdr0, hdr1); + + reg &= ~DCC_ERR_FLG_RCVPORT_ERR_SMASK; + } + + if (reg & DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_UC_SMASK) { + /* informative only */ + dd_dev_info(dd, "8051 access to LCB blocked\n"); + reg &= ~DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_UC_SMASK; + } + if (reg & DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_HOST_SMASK) { + /* informative only */ + dd_dev_info(dd, "host access to LCB blocked\n"); + reg &= ~DCC_ERR_FLG_EN_CSR_ACCESS_BLOCKED_HOST_SMASK; + } + + /* report any remaining errors */ + if (reg) + dd_dev_info(dd, "DCC Error: %s\n", + dcc_err_string(buf, sizeof(buf), reg)); + + if (lcl_reason == 0) + lcl_reason = OPA_LINKDOWN_REASON_UNKNOWN; + + if (do_bounce) { + dd_dev_info(dd, "%s: PortErrorAction bounce\n", __func__); + set_link_down_reason(ppd, lcl_reason, 0, lcl_reason); + start_link(ppd); + } +} + +static void handle_lcb_err(struct hfi1_devdata *dd, u32 unused, u64 reg) +{ + char buf[96]; + + dd_dev_info(dd, "LCB Error: %s\n", + lcb_err_string(buf, sizeof(buf), reg)); +} + +/* + * CCE block DC interrupt. Source is < 8. + */ +static void is_dc_int(struct hfi1_devdata *dd, unsigned int source) +{ + const struct err_reg_info *eri = &dc_errs[source]; + + if (eri->handler) { + interrupt_clear_down(dd, 0, eri); + } else if (source == 3 /* dc_lbm_int */) { + /* + * This indicates that a parity error has occurred on the + * address/control lines presented to the LBM. The error + * is a single pulse, there is no associated error flag, + * and it is non-maskable. This is because if a parity + * error occurs on the request the request is dropped. + * This should never occur, but it is nice to know if it + * ever does. + */ + dd_dev_err(dd, "Parity error in DC LBM block\n"); + } else { + dd_dev_err(dd, "Invalid DC interrupt %u\n", source); + } +} + +/* + * TX block send credit interrupt. Source is < 160. + */ +static void is_send_credit_int(struct hfi1_devdata *dd, unsigned int source) +{ + sc_group_release_update(dd, source); +} + +/* + * TX block SDMA interrupt. Source is < 48. + * + * SDMA interrupts are grouped by type: + * + * 0 - N-1 = SDma + * N - 2N-1 = SDmaProgress + * 2N - 3N-1 = SDmaIdle + */ +static void is_sdma_eng_int(struct hfi1_devdata *dd, unsigned int source) +{ + /* what interrupt */ + unsigned int what = source / TXE_NUM_SDMA_ENGINES; + /* which engine */ + unsigned int which = source % TXE_NUM_SDMA_ENGINES; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(dd, "CONFIG SDMA(%u) %s:%d %s()\n", which, + slashstrip(__FILE__), __LINE__, __func__); + sdma_dumpstate(&dd->per_sdma[which]); +#endif + + if (likely(what < 3 && which < dd->num_sdma)) { + sdma_engine_interrupt(&dd->per_sdma[which], 1ull << source); + } else { + /* should not happen */ + dd_dev_err(dd, "Invalid SDMA interrupt 0x%x\n", source); + } +} + +/* + * RX block receive available interrupt. Source is < 160. + */ +static void is_rcv_avail_int(struct hfi1_devdata *dd, unsigned int source) +{ + struct hfi1_ctxtdata *rcd; + char *err_detail; + + if (likely(source < dd->num_rcv_contexts)) { + rcd = dd->rcd[source]; + if (rcd) { + if (source < dd->first_user_ctxt) + rcd->do_interrupt(rcd); + else + handle_user_interrupt(rcd); + return; /* OK */ + } + /* received an interrupt, but no rcd */ + err_detail = "dataless"; + } else { + /* received an interrupt, but are not using that context */ + err_detail = "out of range"; + } + dd_dev_err(dd, "unexpected %s receive available context interrupt %u\n", + err_detail, source); +} + +/* + * RX block receive urgent interrupt. Source is < 160. + */ +static void is_rcv_urgent_int(struct hfi1_devdata *dd, unsigned int source) +{ + struct hfi1_ctxtdata *rcd; + char *err_detail; + + if (likely(source < dd->num_rcv_contexts)) { + rcd = dd->rcd[source]; + if (rcd) { + /* only pay attention to user urgent interrupts */ + if (source >= dd->first_user_ctxt) + handle_user_interrupt(rcd); + return; /* OK */ + } + /* received an interrupt, but no rcd */ + err_detail = "dataless"; + } else { + /* received an interrupt, but are not using that context */ + err_detail = "out of range"; + } + dd_dev_err(dd, "unexpected %s receive urgent context interrupt %u\n", + err_detail, source); +} + +/* + * Reserved range interrupt. Should not be called in normal operation. + */ +static void is_reserved_int(struct hfi1_devdata *dd, unsigned int source) +{ + char name[64]; + + dd_dev_err(dd, "unexpected %s interrupt\n", + is_reserved_name(name, sizeof(name), source)); +} + +static const struct is_table is_table[] = { +/* start end + name func interrupt func */ +{ IS_GENERAL_ERR_START, IS_GENERAL_ERR_END, + is_misc_err_name, is_misc_err_int }, +{ IS_SDMAENG_ERR_START, IS_SDMAENG_ERR_END, + is_sdma_eng_err_name, is_sdma_eng_err_int }, +{ IS_SENDCTXT_ERR_START, IS_SENDCTXT_ERR_END, + is_sendctxt_err_name, is_sendctxt_err_int }, +{ IS_SDMA_START, IS_SDMA_END, + is_sdma_eng_name, is_sdma_eng_int }, +{ IS_VARIOUS_START, IS_VARIOUS_END, + is_various_name, is_various_int }, +{ IS_DC_START, IS_DC_END, + is_dc_name, is_dc_int }, +{ IS_RCVAVAIL_START, IS_RCVAVAIL_END, + is_rcv_avail_name, is_rcv_avail_int }, +{ IS_RCVURGENT_START, IS_RCVURGENT_END, + is_rcv_urgent_name, is_rcv_urgent_int }, +{ IS_SENDCREDIT_START, IS_SENDCREDIT_END, + is_send_credit_name, is_send_credit_int}, +{ IS_RESERVED_START, IS_RESERVED_END, + is_reserved_name, is_reserved_int}, +}; + +/* + * Interrupt source interrupt - called when the given source has an interrupt. + * Source is a bit index into an array of 64-bit integers. + */ +static void is_interrupt(struct hfi1_devdata *dd, unsigned int source) +{ + const struct is_table *entry; + + /* avoids a double compare by walking the table in-order */ + for (entry = &is_table[0]; entry->is_name; entry++) { + if (source < entry->end) { + trace_hfi1_interrupt(dd, entry, source); + entry->is_int(dd, source - entry->start); + return; + } + } + /* fell off the end */ + dd_dev_err(dd, "invalid interrupt source %u\n", source); +} + +/* + * General interrupt handler. This is able to correctly handle + * all interrupts in case INTx is used. + */ +static irqreturn_t general_interrupt(int irq, void *data) +{ + struct hfi1_devdata *dd = data; + u64 regs[CCE_NUM_INT_CSRS]; + u32 bit; + int i; + + this_cpu_inc(*dd->int_counter); + + /* phase 1: scan and clear all handled interrupts */ + for (i = 0; i < CCE_NUM_INT_CSRS; i++) { + if (dd->gi_mask[i] == 0) { + regs[i] = 0; /* used later */ + continue; + } + regs[i] = read_csr(dd, CCE_INT_STATUS + (8 * i)) & + dd->gi_mask[i]; + /* only clear if anything is set */ + if (regs[i]) + write_csr(dd, CCE_INT_CLEAR + (8 * i), regs[i]); + } + + /* phase 2: call the appropriate handler */ + for_each_set_bit(bit, (unsigned long *)®s[0], + CCE_NUM_INT_CSRS*64) { + is_interrupt(dd, bit); + } + + return IRQ_HANDLED; +} + +static irqreturn_t sdma_interrupt(int irq, void *data) +{ + struct sdma_engine *sde = data; + struct hfi1_devdata *dd = sde->dd; + u64 status; + +#ifdef CONFIG_SDMA_VERBOSITY + dd_dev_err(dd, "CONFIG SDMA(%u) %s:%d %s()\n", sde->this_idx, + slashstrip(__FILE__), __LINE__, __func__); + sdma_dumpstate(sde); +#endif + + this_cpu_inc(*dd->int_counter); + + /* This read_csr is really bad in the hot path */ + status = read_csr(dd, + CCE_INT_STATUS + (8*(IS_SDMA_START/64))) + & sde->imask; + if (likely(status)) { + /* clear the interrupt(s) */ + write_csr(dd, + CCE_INT_CLEAR + (8*(IS_SDMA_START/64)), + status); + + /* handle the interrupt(s) */ + sdma_engine_interrupt(sde, status); + } else + dd_dev_err(dd, "SDMA engine %u interrupt, but no status bits set\n", + sde->this_idx); + + return IRQ_HANDLED; +} + +/* + * NOTE: this routine expects to be on its own MSI-X interrupt. If + * multiple receive contexts share the same MSI-X interrupt, then this + * routine must check for who received it. + */ +static irqreturn_t receive_context_interrupt(int irq, void *data) +{ + struct hfi1_ctxtdata *rcd = data; + struct hfi1_devdata *dd = rcd->dd; + + trace_hfi1_receive_interrupt(dd, rcd->ctxt); + this_cpu_inc(*dd->int_counter); + + /* clear the interrupt */ + write_csr(rcd->dd, CCE_INT_CLEAR + (8*rcd->ireg), rcd->imask); + + /* handle the interrupt */ + rcd->do_interrupt(rcd); + + return IRQ_HANDLED; +} + +/* ========================================================================= */ + +static u32 read_physical_state(struct hfi1_devdata *dd) +{ + u64 reg; + + reg = read_csr(dd, DC_DC8051_STS_CUR_STATE); + return (reg >> DC_DC8051_STS_CUR_STATE_PORT_SHIFT) + & DC_DC8051_STS_CUR_STATE_PORT_MASK; +} + +static u32 read_logical_state(struct hfi1_devdata *dd) +{ + u64 reg; + + reg = read_csr(dd, DCC_CFG_PORT_CONFIG); + return (reg >> DCC_CFG_PORT_CONFIG_LINK_STATE_SHIFT) + & DCC_CFG_PORT_CONFIG_LINK_STATE_MASK; +} + +static void set_logical_state(struct hfi1_devdata *dd, u32 chip_lstate) +{ + u64 reg; + + reg = read_csr(dd, DCC_CFG_PORT_CONFIG); + /* clear current state, set new state */ + reg &= ~DCC_CFG_PORT_CONFIG_LINK_STATE_SMASK; + reg |= (u64)chip_lstate << DCC_CFG_PORT_CONFIG_LINK_STATE_SHIFT; + write_csr(dd, DCC_CFG_PORT_CONFIG, reg); +} + +/* + * Use the 8051 to read a LCB CSR. + */ +static int read_lcb_via_8051(struct hfi1_devdata *dd, u32 addr, u64 *data) +{ + u32 regno; + int ret; + + if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { + if (acquire_lcb_access(dd, 0) == 0) { + *data = read_csr(dd, addr); + release_lcb_access(dd, 0); + return 0; + } + return -EBUSY; + } + + /* register is an index of LCB registers: (offset - base) / 8 */ + regno = (addr - DC_LCB_CFG_RUN) >> 3; + ret = do_8051_command(dd, HCMD_READ_LCB_CSR, regno, data); + if (ret != HCMD_SUCCESS) + return -EBUSY; + return 0; +} + +/* + * Read an LCB CSR. Access may not be in host control, so check. + * Return 0 on success, -EBUSY on failure. + */ +int read_lcb_csr(struct hfi1_devdata *dd, u32 addr, u64 *data) +{ + struct hfi1_pportdata *ppd = dd->pport; + + /* if up, go through the 8051 for the value */ + if (ppd->host_link_state & HLS_UP) + return read_lcb_via_8051(dd, addr, data); + /* if going up or down, no access */ + if (ppd->host_link_state & (HLS_GOING_UP | HLS_GOING_OFFLINE)) + return -EBUSY; + /* otherwise, host has access */ + *data = read_csr(dd, addr); + return 0; +} + +/* + * Use the 8051 to write a LCB CSR. + */ +static int write_lcb_via_8051(struct hfi1_devdata *dd, u32 addr, u64 data) +{ + + if (acquire_lcb_access(dd, 0) == 0) { + write_csr(dd, addr, data); + release_lcb_access(dd, 0); + return 0; + } + return -EBUSY; +} + +/* + * Write an LCB CSR. Access may not be in host control, so check. + * Return 0 on success, -EBUSY on failure. + */ +int write_lcb_csr(struct hfi1_devdata *dd, u32 addr, u64 data) +{ + struct hfi1_pportdata *ppd = dd->pport; + + /* if up, go through the 8051 for the value */ + if (ppd->host_link_state & HLS_UP) + return write_lcb_via_8051(dd, addr, data); + /* if going up or down, no access */ + if (ppd->host_link_state & (HLS_GOING_UP | HLS_GOING_OFFLINE)) + return -EBUSY; + /* otherwise, host has access */ + write_csr(dd, addr, data); + return 0; +} + +/* + * Returns: + * < 0 = Linux error, not able to get access + * > 0 = 8051 command RETURN_CODE + */ +static int do_8051_command( + struct hfi1_devdata *dd, + u32 type, + u64 in_data, + u64 *out_data) +{ + u64 reg, completed; + int return_code; + unsigned long flags; + unsigned long timeout; + + hfi1_cdbg(DC8051, "type %d, data 0x%012llx", type, in_data); + + /* + * Alternative to holding the lock for a long time: + * - keep busy wait - have other users bounce off + */ + spin_lock_irqsave(&dd->dc8051_lock, flags); + + + /* We can't send any commands to the 8051 if it's in reset */ + if (dd->dc_shutdown) { + return_code = -ENODEV; + goto fail; + } + + /* + * If an 8051 host command timed out previously, then the 8051 is + * stuck. + * + * On first timeout, attempt to reset and restart the entire DC + * block (including 8051). (Is this too big of a hammer?) + * + * If the 8051 times out a second time, the reset did not bring it + * back to healthy life. In that case, fail any subsequent commands. + */ + if (dd->dc8051_timed_out) { + if (dd->dc8051_timed_out > 1) { + dd_dev_err(dd, + "Previous 8051 host command timed out, skipping command %u\n", + type); + return_code = -ENXIO; + goto fail; + } + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + dc_shutdown(dd); + dc_start(dd); + spin_lock_irqsave(&dd->dc8051_lock, flags); + } + + /* + * If there is no timeout, then the 8051 command interface is + * waiting for a command. + */ + + /* + * Do two writes: the first to stabilize the type and req_data, the + * second to activate. + */ + reg = ((u64)type & DC_DC8051_CFG_HOST_CMD_0_REQ_TYPE_MASK) + << DC_DC8051_CFG_HOST_CMD_0_REQ_TYPE_SHIFT + | (in_data & DC_DC8051_CFG_HOST_CMD_0_REQ_DATA_MASK) + << DC_DC8051_CFG_HOST_CMD_0_REQ_DATA_SHIFT; + write_csr(dd, DC_DC8051_CFG_HOST_CMD_0, reg); + reg |= DC_DC8051_CFG_HOST_CMD_0_REQ_NEW_SMASK; + write_csr(dd, DC_DC8051_CFG_HOST_CMD_0, reg); + + /* wait for completion, alternate: interrupt */ + timeout = jiffies + msecs_to_jiffies( + quick_linkup ? 20000 : DC8051_COMMAND_TIMEOUT); + while (1) { + reg = read_csr(dd, DC_DC8051_CFG_HOST_CMD_1); + completed = reg & DC_DC8051_CFG_HOST_CMD_1_COMPLETED_SMASK; + if (completed) + break; + if (time_after(jiffies, timeout)) { + dd->dc8051_timed_out++; + dd_dev_err(dd, "8051 host command %u timeout\n", type); + if (out_data) + *out_data = 0; + return_code = -ETIMEDOUT; + goto fail; + } + udelay(2); + } + + if (out_data) { + *out_data = (reg >> DC_DC8051_CFG_HOST_CMD_1_RSP_DATA_SHIFT) + & DC_DC8051_CFG_HOST_CMD_1_RSP_DATA_MASK; + if (type == HCMD_READ_LCB_CSR) { + /* top 16 bits are in a different register */ + *out_data |= (read_csr(dd, DC_DC8051_CFG_EXT_DEV_1) + & DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_SMASK) + << (48 + - DC_DC8051_CFG_EXT_DEV_1_REQ_DATA_SHIFT); + } + } + return_code = (reg >> DC_DC8051_CFG_HOST_CMD_1_RETURN_CODE_SHIFT) + & DC_DC8051_CFG_HOST_CMD_1_RETURN_CODE_MASK; + dd->dc8051_timed_out = 0; + /* + * Clear command for next user. + */ + write_csr(dd, DC_DC8051_CFG_HOST_CMD_0, 0); + +fail: + spin_unlock_irqrestore(&dd->dc8051_lock, flags); + + return return_code; +} + +static int set_physical_link_state(struct hfi1_devdata *dd, u64 state) +{ + return do_8051_command(dd, HCMD_CHANGE_PHY_STATE, state, NULL); +} + +static int load_8051_config(struct hfi1_devdata *dd, u8 field_id, + u8 lane_id, u32 config_data) +{ + u64 data; + int ret; + + data = (u64)field_id << LOAD_DATA_FIELD_ID_SHIFT + | (u64)lane_id << LOAD_DATA_LANE_ID_SHIFT + | (u64)config_data << LOAD_DATA_DATA_SHIFT; + ret = do_8051_command(dd, HCMD_LOAD_CONFIG_DATA, data, NULL); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, + "load 8051 config: field id %d, lane %d, err %d\n", + (int)field_id, (int)lane_id, ret); + } + return ret; +} + +static int read_8051_config(struct hfi1_devdata *dd, u8 field_id, + u8 lane_id, u32 *config_data) +{ + u64 in_data; + u64 out_data; + int ret; + + in_data = (u64)field_id << READ_DATA_FIELD_ID_SHIFT + | (u64)lane_id << READ_DATA_LANE_ID_SHIFT; + ret = do_8051_command(dd, HCMD_READ_CONFIG_DATA, in_data, + &out_data); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, + "read 8051 config: field id %d, lane %d, err %d failed\n", + (int)field_id, (int)lane_id, ret); + out_data = 0; + } + *config_data = (out_data >> READ_DATA_DATA_SHIFT) & READ_DATA_DATA_MASK; + return ret; +} + +static int write_vc_local_phy(struct hfi1_devdata *dd, u8 power_management, + u8 continuous) +{ + u32 frame; + + frame = continuous << CONTINIOUS_REMOTE_UPDATE_SUPPORT_SHIFT + | power_management << POWER_MANAGEMENT_SHIFT; + return load_8051_config(dd, VERIFY_CAP_LOCAL_PHY, + GENERAL_CONFIG, frame); +} + +static int write_vc_local_fabric(struct hfi1_devdata *dd, u8 vau, u8 z, u8 vcu, + u16 vl15buf, u8 crc_sizes) +{ + u32 frame; + + frame = (u32)vau << VAU_SHIFT + | (u32)z << Z_SHIFT + | (u32)vcu << VCU_SHIFT + | (u32)vl15buf << VL15BUF_SHIFT + | (u32)crc_sizes << CRC_SIZES_SHIFT; + return load_8051_config(dd, VERIFY_CAP_LOCAL_FABRIC, + GENERAL_CONFIG, frame); +} + +static void read_vc_local_link_width(struct hfi1_devdata *dd, u8 *misc_bits, + u8 *flag_bits, u16 *link_widths) +{ + u32 frame; + + read_8051_config(dd, VERIFY_CAP_LOCAL_LINK_WIDTH, GENERAL_CONFIG, + &frame); + *misc_bits = (frame >> MISC_CONFIG_BITS_SHIFT) & MISC_CONFIG_BITS_MASK; + *flag_bits = (frame >> LOCAL_FLAG_BITS_SHIFT) & LOCAL_FLAG_BITS_MASK; + *link_widths = (frame >> LINK_WIDTH_SHIFT) & LINK_WIDTH_MASK; +} + +static int write_vc_local_link_width(struct hfi1_devdata *dd, + u8 misc_bits, + u8 flag_bits, + u16 link_widths) +{ + u32 frame; + + frame = (u32)misc_bits << MISC_CONFIG_BITS_SHIFT + | (u32)flag_bits << LOCAL_FLAG_BITS_SHIFT + | (u32)link_widths << LINK_WIDTH_SHIFT; + return load_8051_config(dd, VERIFY_CAP_LOCAL_LINK_WIDTH, GENERAL_CONFIG, + frame); +} + +static int write_local_device_id(struct hfi1_devdata *dd, u16 device_id, + u8 device_rev) +{ + u32 frame; + + frame = ((u32)device_id << LOCAL_DEVICE_ID_SHIFT) + | ((u32)device_rev << LOCAL_DEVICE_REV_SHIFT); + return load_8051_config(dd, LOCAL_DEVICE_ID, GENERAL_CONFIG, frame); +} + +static void read_remote_device_id(struct hfi1_devdata *dd, u16 *device_id, + u8 *device_rev) +{ + u32 frame; + + read_8051_config(dd, REMOTE_DEVICE_ID, GENERAL_CONFIG, &frame); + *device_id = (frame >> REMOTE_DEVICE_ID_SHIFT) & REMOTE_DEVICE_ID_MASK; + *device_rev = (frame >> REMOTE_DEVICE_REV_SHIFT) + & REMOTE_DEVICE_REV_MASK; +} + +void read_misc_status(struct hfi1_devdata *dd, u8 *ver_a, u8 *ver_b) +{ + u32 frame; + + read_8051_config(dd, MISC_STATUS, GENERAL_CONFIG, &frame); + *ver_a = (frame >> STS_FM_VERSION_A_SHIFT) & STS_FM_VERSION_A_MASK; + *ver_b = (frame >> STS_FM_VERSION_B_SHIFT) & STS_FM_VERSION_B_MASK; +} + +static void read_vc_remote_phy(struct hfi1_devdata *dd, u8 *power_management, + u8 *continuous) +{ + u32 frame; + + read_8051_config(dd, VERIFY_CAP_REMOTE_PHY, GENERAL_CONFIG, &frame); + *power_management = (frame >> POWER_MANAGEMENT_SHIFT) + & POWER_MANAGEMENT_MASK; + *continuous = (frame >> CONTINIOUS_REMOTE_UPDATE_SUPPORT_SHIFT) + & CONTINIOUS_REMOTE_UPDATE_SUPPORT_MASK; +} + +static void read_vc_remote_fabric(struct hfi1_devdata *dd, u8 *vau, u8 *z, + u8 *vcu, u16 *vl15buf, u8 *crc_sizes) +{ + u32 frame; + + read_8051_config(dd, VERIFY_CAP_REMOTE_FABRIC, GENERAL_CONFIG, &frame); + *vau = (frame >> VAU_SHIFT) & VAU_MASK; + *z = (frame >> Z_SHIFT) & Z_MASK; + *vcu = (frame >> VCU_SHIFT) & VCU_MASK; + *vl15buf = (frame >> VL15BUF_SHIFT) & VL15BUF_MASK; + *crc_sizes = (frame >> CRC_SIZES_SHIFT) & CRC_SIZES_MASK; +} + +static void read_vc_remote_link_width(struct hfi1_devdata *dd, + u8 *remote_tx_rate, + u16 *link_widths) +{ + u32 frame; + + read_8051_config(dd, VERIFY_CAP_REMOTE_LINK_WIDTH, GENERAL_CONFIG, + &frame); + *remote_tx_rate = (frame >> REMOTE_TX_RATE_SHIFT) + & REMOTE_TX_RATE_MASK; + *link_widths = (frame >> LINK_WIDTH_SHIFT) & LINK_WIDTH_MASK; +} + +static void read_local_lni(struct hfi1_devdata *dd, u8 *enable_lane_rx) +{ + u32 frame; + + read_8051_config(dd, LOCAL_LNI_INFO, GENERAL_CONFIG, &frame); + *enable_lane_rx = (frame >> ENABLE_LANE_RX_SHIFT) & ENABLE_LANE_RX_MASK; +} + +static void read_mgmt_allowed(struct hfi1_devdata *dd, u8 *mgmt_allowed) +{ + u32 frame; + + read_8051_config(dd, REMOTE_LNI_INFO, GENERAL_CONFIG, &frame); + *mgmt_allowed = (frame >> MGMT_ALLOWED_SHIFT) & MGMT_ALLOWED_MASK; +} + +static void read_last_local_state(struct hfi1_devdata *dd, u32 *lls) +{ + read_8051_config(dd, LAST_LOCAL_STATE_COMPLETE, GENERAL_CONFIG, lls); +} + +static void read_last_remote_state(struct hfi1_devdata *dd, u32 *lrs) +{ + read_8051_config(dd, LAST_REMOTE_STATE_COMPLETE, GENERAL_CONFIG, lrs); +} + +void hfi1_read_link_quality(struct hfi1_devdata *dd, u8 *link_quality) +{ + u32 frame; + + read_8051_config(dd, LINK_QUALITY_INFO, GENERAL_CONFIG, &frame); + *link_quality = (frame >> LINK_QUALITY_SHIFT) & LINK_QUALITY_MASK; +} + +static void read_planned_down_reason_code(struct hfi1_devdata *dd, u8 *pdrrc) +{ + u32 frame; + + read_8051_config(dd, LINK_QUALITY_INFO, GENERAL_CONFIG, &frame); + *pdrrc = (frame >> DOWN_REMOTE_REASON_SHIFT) & DOWN_REMOTE_REASON_MASK; +} + +static int read_tx_settings(struct hfi1_devdata *dd, + u8 *enable_lane_tx, + u8 *tx_polarity_inversion, + u8 *rx_polarity_inversion, + u8 *max_rate) +{ + u32 frame; + int ret; + + ret = read_8051_config(dd, TX_SETTINGS, GENERAL_CONFIG, &frame); + *enable_lane_tx = (frame >> ENABLE_LANE_TX_SHIFT) + & ENABLE_LANE_TX_MASK; + *tx_polarity_inversion = (frame >> TX_POLARITY_INVERSION_SHIFT) + & TX_POLARITY_INVERSION_MASK; + *rx_polarity_inversion = (frame >> RX_POLARITY_INVERSION_SHIFT) + & RX_POLARITY_INVERSION_MASK; + *max_rate = (frame >> MAX_RATE_SHIFT) & MAX_RATE_MASK; + return ret; +} + +static int write_tx_settings(struct hfi1_devdata *dd, + u8 enable_lane_tx, + u8 tx_polarity_inversion, + u8 rx_polarity_inversion, + u8 max_rate) +{ + u32 frame; + + /* no need to mask, all variable sizes match field widths */ + frame = enable_lane_tx << ENABLE_LANE_TX_SHIFT + | tx_polarity_inversion << TX_POLARITY_INVERSION_SHIFT + | rx_polarity_inversion << RX_POLARITY_INVERSION_SHIFT + | max_rate << MAX_RATE_SHIFT; + return load_8051_config(dd, TX_SETTINGS, GENERAL_CONFIG, frame); +} + +static void check_fabric_firmware_versions(struct hfi1_devdata *dd) +{ + u32 frame, version, prod_id; + int ret, lane; + + /* 4 lanes */ + for (lane = 0; lane < 4; lane++) { + ret = read_8051_config(dd, SPICO_FW_VERSION, lane, &frame); + if (ret != HCMD_SUCCESS) { + dd_dev_err( + dd, + "Unable to read lane %d firmware details\n", + lane); + continue; + } + version = (frame >> SPICO_ROM_VERSION_SHIFT) + & SPICO_ROM_VERSION_MASK; + prod_id = (frame >> SPICO_ROM_PROD_ID_SHIFT) + & SPICO_ROM_PROD_ID_MASK; + dd_dev_info(dd, + "Lane %d firmware: version 0x%04x, prod_id 0x%04x\n", + lane, version, prod_id); + } +} + +/* + * Read an idle LCB message. + * + * Returns 0 on success, -EINVAL on error + */ +static int read_idle_message(struct hfi1_devdata *dd, u64 type, u64 *data_out) +{ + int ret; + + ret = do_8051_command(dd, HCMD_READ_LCB_IDLE_MSG, + type, data_out); + if (ret != HCMD_SUCCESS) { + dd_dev_err(dd, "read idle message: type %d, err %d\n", + (u32)type, ret); + return -EINVAL; + } + dd_dev_info(dd, "%s: read idle message 0x%llx\n", __func__, *data_out); + /* return only the payload as we already know the type */ + *data_out >>= IDLE_PAYLOAD_SHIFT; + return 0; +} + +/* + * Read an idle SMA message. To be done in response to a notification from + * the 8051. + * + * Returns 0 on success, -EINVAL on error + */ +static int read_idle_sma(struct hfi1_devdata *dd, u64 *data) +{ + return read_idle_message(dd,