From patchwork Thu Jul 30 19:18:54 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Marciniszyn, Mike" X-Patchwork-Id: 6906251 Return-Path: X-Original-To: patchwork-linux-rdma@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id B5B2FC05AC for ; Thu, 30 Jul 2015 19:19:00 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 1C5D0202EB for ; Thu, 30 Jul 2015 19:18:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 3ED6820458 for ; Thu, 30 Jul 2015 19:18:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753903AbbG3TS4 (ORCPT ); Thu, 30 Jul 2015 15:18:56 -0400 Received: from mga09.intel.com ([134.134.136.24]:24782 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753893AbbG3TS4 (ORCPT ); Thu, 30 Jul 2015 15:18:56 -0400 Received: from orsmga003.jf.intel.com ([10.7.209.27]) by orsmga102.jf.intel.com with ESMTP; 30 Jul 2015 12:18:55 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.15,578,1432623600"; d="scan'208";a="616273942" Received: from sedona.ch.intel.com ([143.182.228.65]) by orsmga003.jf.intel.com with ESMTP; 30 Jul 2015 12:18:56 -0700 Received: from phlsvsles11.ph.intel.com (phlsvsles11.ph.intel.com [10.228.195.43]) by sedona.ch.intel.com (8.13.6/8.14.3/Standard MailSET/Hub) with ESMTP id t6UJIsmn009000; Thu, 30 Jul 2015 12:18:54 -0700 Received: from phlsvslse11.ph.intel.com (localhost [127.0.0.1]) by phlsvsles11.ph.intel.com with ESMTP id t6UJIsVh025988; Thu, 30 Jul 2015 15:18:54 -0400 Subject: [PATCH v4 16/50] IB/hfi1: add eeprom hooks To: dledford@redhat.com From: Mike Marciniszyn Cc: linux-rdma@vger.kernel.org Date: Thu, 30 Jul 2015 15:18:54 -0400 Message-ID: <20150730191853.25256.64994.stgit@phlsvslse11.ph.intel.com> In-Reply-To: <20150730191631.25256.95511.stgit@phlsvslse11.ph.intel.com> References: <20150730191631.25256.95511.stgit@phlsvslse11.ph.intel.com> User-Agent: StGit/0.16 MIME-Version: 1.0 Sender: linux-rdma-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-rdma@vger.kernel.org X-Spam-Status: No, score=-8.3 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Signed-off-by: Andrew Friedley Signed-off-by: Arthur Kepner Signed-off-by: Brendan Cunningham Signed-off-by: Brian Welty Signed-off-by: Caz Yokoyama Signed-off-by: Dean Luick Signed-off-by: Dennis Dalessandro Signed-off-by: Easwar Hariharan Signed-off-by: Harish Chegondi Signed-off-by: Ira Weiny Signed-off-by: Jim Snow Signed-off-by: John Gregor Signed-off-by: Jubin John Signed-off-by: Kaike Wan Signed-off-by: Kevin Pine Signed-off-by: Kyle Liddell Signed-off-by: Mike Marciniszyn Signed-off-by: Mitko Haralanov Signed-off-by: Ravi Krishnaswamy Signed-off-by: Sadanand Warrier Signed-off-by: Sanath Kumar Signed-off-by: Sudeep Dutt Signed-off-by: Vlad Danushevsky --- drivers/infiniband/hw/hfi1/eprom.c | 475 ++++++++++++++++++++++++++++++++++++ drivers/infiniband/hw/hfi1/eprom.h | 55 ++++ 2 files changed, 530 insertions(+) create mode 100644 drivers/infiniband/hw/hfi1/eprom.c create mode 100644 drivers/infiniband/hw/hfi1/eprom.h -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/infiniband/hw/hfi1/eprom.c b/drivers/infiniband/hw/hfi1/eprom.c new file mode 100644 index 0000000..b61d3ae --- /dev/null +++ b/drivers/infiniband/hw/hfi1/eprom.c @@ -0,0 +1,475 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include +#include "hfi.h" +#include "common.h" +#include "eprom.h" + +/* + * The EPROM is logically divided into two partitions: + * partition 0: the first 128K, visible from PCI ROM BAR + * partition 1: the rest + */ +#define P0_SIZE (128 * 1024) +#define P1_START P0_SIZE + +/* largest erase size supported by the controller */ +#define SIZE_32KB (32 * 1024) +#define MASK_32KB (SIZE_32KB - 1) + +/* controller page size, in bytes */ +#define EP_PAGE_SIZE 256 +#define EEP_PAGE_MASK (EP_PAGE_SIZE - 1) + +/* controller commands */ +#define CMD_SHIFT 24 +#define CMD_NOP (0) +#define CMD_PAGE_PROGRAM(addr) ((0x02 << CMD_SHIFT) | addr) +#define CMD_READ_DATA(addr) ((0x03 << CMD_SHIFT) | addr) +#define CMD_READ_SR1 ((0x05 << CMD_SHIFT)) +#define CMD_WRITE_ENABLE ((0x06 << CMD_SHIFT)) +#define CMD_SECTOR_ERASE_32KB(addr) ((0x52 << CMD_SHIFT) | addr) +#define CMD_CHIP_ERASE ((0x60 << CMD_SHIFT)) +#define CMD_READ_MANUF_DEV_ID ((0x90 << CMD_SHIFT)) +#define CMD_RELEASE_POWERDOWN_NOID ((0xab << CMD_SHIFT)) + +/* controller interface speeds */ +#define EP_SPEED_FULL 0x2 /* full speed */ + +/* controller status register 1 bits */ +#define SR1_BUSY 0x1ull /* the BUSY bit in SR1 */ + +/* sleep length while waiting for controller */ +#define WAIT_SLEEP_US 100 /* must be larger than 5 (see usage) */ +#define COUNT_DELAY_SEC(n) ((n) * (1000000/WAIT_SLEEP_US)) + +/* GPIO pins */ +#define EPROM_WP_N (1ull << 14) /* EPROM write line */ + +/* + * Use the EP mutex to guard against other callers from within the driver. + * Also covers usage of eprom_available. + */ +static DEFINE_MUTEX(eprom_mutex); +static int eprom_available; /* default: not available */ + +/* + * Turn on external enable line that allows writing on the flash. + */ +static void write_enable(struct hfi1_devdata *dd) +{ + /* raise signal */ + write_csr(dd, ASIC_GPIO_OUT, + read_csr(dd, ASIC_GPIO_OUT) | EPROM_WP_N); + /* raise enable */ + write_csr(dd, ASIC_GPIO_OE, + read_csr(dd, ASIC_GPIO_OE) | EPROM_WP_N); +} + +/* + * Turn off external enable line that allows writing on the flash. + */ +static void write_disable(struct hfi1_devdata *dd) +{ + /* lower signal */ + write_csr(dd, ASIC_GPIO_OUT, + read_csr(dd, ASIC_GPIO_OUT) & ~EPROM_WP_N); + /* lower enable */ + write_csr(dd, ASIC_GPIO_OE, + read_csr(dd, ASIC_GPIO_OE) & ~EPROM_WP_N); +} + +/* + * Wait for the device to become not busy. Must be called after all + * write or erase operations. + */ +static int wait_for_not_busy(struct hfi1_devdata *dd) +{ + unsigned long count = 0; + u64 reg; + int ret = 0; + + /* starts page mode */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_SR1); + while (1) { + udelay(WAIT_SLEEP_US); + usleep_range(WAIT_SLEEP_US - 5, WAIT_SLEEP_US + 5); + count++; + reg = read_csr(dd, ASIC_EEP_DATA); + if ((reg & SR1_BUSY) == 0) + break; + /* 200s is the largest time for a 128Mb device */ + if (count > COUNT_DELAY_SEC(200)) { + dd_dev_err(dd, "waited too long for SPI FLASH busy to clear - failing\n"); + ret = -ETIMEDOUT; + break; /* break, not goto - must stop page mode */ + } + } + + /* stop page mode with a NOP */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); + + return ret; +} + +/* + * Read the device ID from the SPI controller. + */ +static u32 read_device_id(struct hfi1_devdata *dd) +{ + /* read the Manufacture Device ID */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_MANUF_DEV_ID); + return (u32)read_csr(dd, ASIC_EEP_DATA); +} + +/* + * Erase the whole flash. + */ +static int erase_chip(struct hfi1_devdata *dd) +{ + int ret; + + write_enable(dd); + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_CHIP_ERASE); + ret = wait_for_not_busy(dd); + + write_disable(dd); + + return ret; +} + +/* + * Erase a range using the 32KB erase command. + */ +static int erase_32kb_range(struct hfi1_devdata *dd, u32 start, u32 end) +{ + int ret = 0; + + if (end < start) + return -EINVAL; + + if ((start & MASK_32KB) || (end & MASK_32KB)) { + dd_dev_err(dd, + "%s: non-aligned range (0x%x,0x%x) for a 32KB erase\n", + __func__, start, end); + return -EINVAL; + } + + write_enable(dd); + + for (; start < end; start += SIZE_32KB) { + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_ADDR_CMD, + CMD_SECTOR_ERASE_32KB(start)); + ret = wait_for_not_busy(dd); + if (ret) + goto done; + } + +done: + write_disable(dd); + + return ret; +} + +/* + * Read a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset)); + for (i = 0; i < EP_PAGE_SIZE/sizeof(u32); i++) + result[i] = (u32)read_csr(dd, ASIC_EEP_DATA); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */ +} + +/* + * Read length bytes starting at offset. Copy to user address addr. + */ +static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr) +{ + u32 offset; + u32 buffer[EP_PAGE_SIZE/sizeof(u32)]; + int ret = 0; + + /* reject anything not on an EPROM page boundary */ + if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK)) + return -EINVAL; + + for (offset = 0; offset < len; offset += EP_PAGE_SIZE) { + read_page(dd, start + offset, buffer); + if (copy_to_user((void __user *)(addr + offset), + buffer, EP_PAGE_SIZE)) { + ret = -EFAULT; + goto done; + } + } + +done: + return ret; +} + +/* + * Write a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static int write_page(struct hfi1_devdata *dd, u32 offset, u32 *data) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE); + write_csr(dd, ASIC_EEP_DATA, data[0]); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_PAGE_PROGRAM(offset)); + for (i = 1; i < EP_PAGE_SIZE/sizeof(u32); i++) + write_csr(dd, ASIC_EEP_DATA, data[i]); + /* will close the open page */ + return wait_for_not_busy(dd); +} + +/* + * Write length bytes starting at offset. Read from user address addr. + */ +static int write_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr) +{ + u32 offset; + u32 buffer[EP_PAGE_SIZE/sizeof(u32)]; + int ret = 0; + + /* reject anything not on an EPROM page boundary */ + if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK)) + return -EINVAL; + + write_enable(dd); + + for (offset = 0; offset < len; offset += EP_PAGE_SIZE) { + if (copy_from_user(buffer, (void __user *)(addr + offset), + EP_PAGE_SIZE)) { + ret = -EFAULT; + goto done; + } + ret = write_page(dd, start + offset, buffer); + if (ret) + goto done; + } + +done: + write_disable(dd); + return ret; +} + +/* + * Perform the given operation on the EPROM. Called from user space. The + * user credentials have already been checked. + * + * Return 0 on success, -ERRNO on error + */ +int handle_eprom_command(const struct hfi1_cmd *cmd) +{ + struct hfi1_devdata *dd; + u32 dev_id; + int ret = 0; + + /* + * The EPROM is per-device, so use unit 0 as that will always + * exist. + */ + dd = hfi1_lookup(0); + if (!dd) { + pr_err("%s: cannot find unit 0!\n", __func__); + return -EINVAL; + } + + /* lock against other callers touching the ASIC block */ + mutex_lock(&eprom_mutex); + + /* some platforms do not have an EPROM */ + if (!eprom_available) { + ret = -ENOSYS; + goto done_asic; + } + + /* lock against the other HFI on another OS */ + ret = acquire_hw_mutex(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire hw mutex, no EPROM support\n", + __func__); + goto done_asic; + } + + dd_dev_info(dd, "%s: cmd: type %d, len 0x%x, addr 0x%016llx\n", + __func__, cmd->type, cmd->len, cmd->addr); + + switch (cmd->type) { + case HFI1_CMD_EP_INFO: + if (cmd->len != sizeof(u32)) { + ret = -ERANGE; + break; + } + dev_id = read_device_id(dd); + /* addr points to a u32 user buffer */ + if (copy_to_user((void __user *)cmd->addr, &dev_id, + sizeof(u32))) + ret = -EFAULT; + break; + case HFI1_CMD_EP_ERASE_CHIP: + ret = erase_chip(dd); + break; + case HFI1_CMD_EP_ERASE_P0: + if (cmd->len != P0_SIZE) { + ret = -ERANGE; + break; + } + ret = erase_32kb_range(dd, 0, cmd->len); + break; + case HFI1_CMD_EP_ERASE_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = erase_32kb_range(dd, P1_START, P1_START + cmd->len); + break; + case HFI1_CMD_EP_READ_P0: + if (cmd->len != P0_SIZE) { + ret = -ERANGE; + break; + } + ret = read_length(dd, 0, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_READ_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = read_length(dd, P1_START, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_WRITE_P0: + if (cmd->len > P0_SIZE) { + ret = -ERANGE; + break; + } + ret = write_length(dd, 0, cmd->len, cmd->addr); + break; + case HFI1_CMD_EP_WRITE_P1: + /* check for overflow */ + if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) { + ret = -ERANGE; + break; + } + ret = write_length(dd, P1_START, cmd->len, cmd->addr); + break; + default: + dd_dev_err(dd, "%s: unexpected command %d\n", + __func__, cmd->type); + ret = -EINVAL; + break; + } + + release_hw_mutex(dd); +done_asic: + mutex_unlock(&eprom_mutex); + return ret; +} + +/* + * Initialize the EPROM handler. + */ +int eprom_init(struct hfi1_devdata *dd) +{ + int ret = 0; + + /* only the discrete chip has an EPROM, nothing to do */ + if (dd->pcidev->device != PCI_DEVICE_ID_INTEL0) + return 0; + + /* lock against other callers */ + mutex_lock(&eprom_mutex); + if (eprom_available) /* already initialized */ + goto done_asic; + + /* + * Lock against the other HFI on another OS - the mutex above + * would have caught anything in this driver. It is OK if + * both OSes reset the EPROM - as long as they don't do it at + * the same time. + */ + ret = acquire_hw_mutex(dd); + if (ret) { + dd_dev_err(dd, + "%s: unable to acquire hw mutex, no EPROM support\n", + __func__); + goto done_asic; + } + + /* reset EPROM to be sure it is in a good state */ + + /* set reset */ + write_csr(dd, ASIC_EEP_CTL_STAT, + ASIC_EEP_CTL_STAT_EP_RESET_SMASK); + /* clear reset, set speed */ + write_csr(dd, ASIC_EEP_CTL_STAT, + EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT); + + /* wake the device with command "release powerdown NoID" */ + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_RELEASE_POWERDOWN_NOID); + + eprom_available = 1; + release_hw_mutex(dd); +done_asic: + mutex_unlock(&eprom_mutex); + return ret; +} diff --git a/drivers/infiniband/hw/hfi1/eprom.h b/drivers/infiniband/hw/hfi1/eprom.h new file mode 100644 index 0000000..64a6427 --- /dev/null +++ b/drivers/infiniband/hw/hfi1/eprom.h @@ -0,0 +1,55 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +struct hfi1_cmd; +struct hfi1_devdata; + +int eprom_init(struct hfi1_devdata *dd); +int handle_eprom_command(const struct hfi1_cmd *cmd);