diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h
new file mode 100644
index 0000000..8ca171b
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -0,0 +1,1821 @@
+#ifndef _HFI1_KERNEL_H
+#define _HFI1_KERNEL_H
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/fs.h>
+#include <linux/completion.h>
+#include <linux/kref.h>
+#include <linux/sched.h>
+#include <linux/cdev.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+
+#include "chip_registers.h"
+#include "common.h"
+#include "verbs.h"
+#include "pio.h"
+#include "chip.h"
+#include "mad.h"
+#include "qsfp.h"
+#include "platform_config.h"
+
+/* bumped 1 from s/w major version of TrueScale */
+#define HFI1_CHIP_VERS_MAJ 3U
+
+/* don't care about this except printing */
+#define HFI1_CHIP_VERS_MIN 0U
+
+/* The Organization Unique Identifier (Mfg code), and its position in GUID */
+#define HFI1_OUI 0x001175
+#define HFI1_OUI_LSB 40
+
+#define DROP_PACKET_OFF		0
+#define DROP_PACKET_ON		1
+
+extern unsigned long hfi1_cap_mask;
+#define HFI1_CAP_KGET_MASK(mask, cap) ((mask) & HFI1_CAP_##cap)
+#define HFI1_CAP_UGET_MASK(mask, cap) \
+	(((mask) >> HFI1_CAP_USER_SHIFT) & HFI1_CAP_##cap)
+#define HFI1_CAP_KGET(cap) (HFI1_CAP_KGET_MASK(hfi1_cap_mask, cap))
+#define HFI1_CAP_UGET(cap) (HFI1_CAP_UGET_MASK(hfi1_cap_mask, cap))
+#define HFI1_CAP_IS_KSET(cap) (!!HFI1_CAP_KGET(cap))
+#define HFI1_CAP_IS_USET(cap) (!!HFI1_CAP_UGET(cap))
+#define HFI1_MISC_GET() ((hfi1_cap_mask >> HFI1_CAP_MISC_SHIFT) & \
+			HFI1_CAP_MISC_MASK)
+
+/*
+ * per driver stats, either not device nor port-specific, or
+ * summed over all of the devices and ports.
+ * They are described by name via ipathfs filesystem, so layout
+ * and number of elements can change without breaking compatibility.
+ * If members are added or deleted hfi1_statnames[] in debugfs.c must
+ * change to match.
+ */
+struct hfi1_ib_stats {
+	__u64 sps_ints; /* number of interrupts handled */
+	__u64 sps_errints; /* number of error interrupts */
+	__u64 sps_txerrs; /* tx-related packet errors */
+	__u64 sps_rcverrs; /* non-crc rcv packet errors */
+	__u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */
+	__u64 sps_nopiobufs; /* no pio bufs avail from kernel */
+	__u64 sps_ctxts; /* number of contexts currently open */
+	__u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */
+	__u64 sps_buffull;
+	__u64 sps_hdrfull;
+};
+
+extern struct hfi1_ib_stats hfi1_stats;
+extern const struct pci_error_handlers hfi1_pci_err_handler;
+
+/*
+ * First-cut criterion for "device is active" is
+ * two thousand dwords combined Tx, Rx traffic per
+ * 5-second interval. SMA packets are 64 dwords,
+ * and occur "a few per second", presumably each way.
+ */
+#define HFI1_TRAFFIC_ACTIVE_THRESHOLD (2000)
+
+/*
+ * Below contains all data related to a single context (formerly called port).
+ */
+
+#ifdef CONFIG_DEBUG_FS
+struct hfi1_opcode_stats_perctx;
+#endif
+
+/*
+ * struct ps_state keeps state associated with RX queue "prescanning"
+ * (prescanning for FECNs, and BECNs), if prescanning is in use.
+ */
+struct ps_state {
+	u32 ps_head;
+	int initialized;
+};
+
+struct ctxt_eager_bufs {
+	ssize_t size;            /* total size of eager buffers */
+	u32 count;               /* size of buffers array */
+	u32 numbufs;             /* number of buffers allocated */
+	u32 alloced;             /* number of rcvarray entries used */
+	u32 rcvtid_size;         /* size of each eager rcv tid */
+	u32 threshold;           /* head update threshold */
+	struct eager_buffer {
+		void *addr;
+		dma_addr_t phys;
+		ssize_t len;
+	} *buffers;
+	struct {
+		void *addr;
+		dma_addr_t phys;
+	} *rcvtids;
+};
+
+struct hfi1_ctxtdata {
+	/* shadow the ctxt's RcvCtrl register */
+	u64 rcvctrl;
+	/* rcvhdrq base, needs mmap before useful */
+	void *rcvhdrq;
+	/* kernel virtual address where hdrqtail is updated */
+	volatile __le64 *rcvhdrtail_kvaddr;
+	/*
+	 * Shared page for kernel to signal user processes that send buffers
+	 * need disarming.  The process should call HFI1_CMD_DISARM_BUFS
+	 * or HFI1_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set.
+	 */
+	unsigned long *user_event_mask;
+	/* when waiting for rcv or pioavail */
+	wait_queue_head_t wait;
+	/* rcvhdrq size (for freeing) */
+	size_t rcvhdrq_size;
+	/* number of rcvhdrq entries */
+	u16 rcvhdrq_cnt;
+	/* size of each of the rcvhdrq entries */
+	u16 rcvhdrqentsize;
+	/* mmap of hdrq, must fit in 44 bits */
+	dma_addr_t rcvhdrq_phys;
+	dma_addr_t rcvhdrqtailaddr_phys;
+	struct ctxt_eager_bufs egrbufs;
+	/* this receive context's assigned PIO ACK send context */
+	struct send_context *sc;
+
+	/* dynamic receive available interrupt timeout */
+	u32 rcvavail_timeout;
+	/*
+	 * number of opens (including slave sub-contexts) on this instance
+	 * (ignoring forks, dup, etc. for now)
+	 */
+	int cnt;
+	/*
+	 * how much space to leave at start of eager TID entries for
+	 * protocol use, on each TID
+	 */
+	/* instead of calculating it */
+	unsigned ctxt;
+	/* non-zero if ctxt is being shared. */
+	u16 subctxt_cnt;
+	/* non-zero if ctxt is being shared. */
+	u16 subctxt_id;
+	u8 uuid[16];
+	/* job key */
+	u16 jkey;
+	/* number of RcvArray groups for this context. */
+	u32 rcv_array_groups;
+	/* index of first eager TID entry. */
+	u32 eager_base;
+	/* number of expected TID entries */
+	u32 expected_count;
+	/* index of first expected TID entry. */
+	u32 expected_base;
+	/* cursor into the exp group sets */
+	atomic_t tidcursor;
+	/* number of exp TID groups assigned to the ctxt */
+	u16 numtidgroups;
+	/* size of exp TID group fields in tidusemap */
+	u16 tidmapcnt;
+	/* exp TID group usage bitfield array */
+	unsigned long *tidusemap;
+	/* pinned pages for exp sends, allocated at open */
+	struct page **tid_pg_list;
+	/* dma handles for exp tid pages */
+	dma_addr_t *physshadow;
+	/* lock protecting all Expected TID data */
+	spinlock_t exp_lock;
+	/* number of pio bufs for this ctxt (all procs, if shared) */
+	u32 piocnt;
+	/* first pio buffer for this ctxt */
+	u32 pio_base;
+	/* chip offset of PIO buffers for this ctxt */
+	u32 piobufs;
+	/* per-context configuration flags */
+	u16 flags;
+	/* per-context event flags for fileops/intr communication */
+	unsigned long event_flags;
+	/* WAIT_RCV that timed out, no interrupt */
+	u32 rcvwait_to;
+	/* WAIT_PIO that timed out, no interrupt */
+	u32 piowait_to;
+	/* WAIT_RCV already happened, no wait */
+	u32 rcvnowait;
+	/* WAIT_PIO already happened, no wait */
+	u32 pionowait;
+	/* total number of polled urgent packets */
+	u32 urgent;
+	/* saved total number of polled urgent packets for poll edge trigger */
+	u32 urgent_poll;
+	/* pid of process using this ctxt */
+	pid_t pid;
+	pid_t subpid[HFI1_MAX_SHARED_CTXTS];
+	/* same size as task_struct .comm[], command that opened context */
+	char comm[16];
+	/* so file ops can get at unit */
+	struct hfi1_devdata *dd;
+	/* so functions that need physical port can get it easily */
+	struct hfi1_pportdata *ppd;
+	/* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
+	void *subctxt_uregbase;
+	/* An array of pages for the eager receive buffers * N */
+	void *subctxt_rcvegrbuf;
+	/* An array of pages for the eager header queue entries * N */
+	void *subctxt_rcvhdr_base;
+	/* The version of the library which opened this ctxt */
+	u32 userversion;
+	/* Bitmask of active slaves */
+	u32 active_slaves;
+	/* Type of packets or conditions we want to poll for */
+	u16 poll_type;
+	/* receive packet sequence counter */
+	u8 seq_cnt;
+	u8 redirect_seq_cnt;
+	/* ctxt rcvhdrq head offset */
+	u32 head;
+	u32 pkt_count;
+	/* QPs waiting for context processing */
+	struct list_head qp_wait_list;
+	/* interrupt handling */
+	u64 imask;	/* clear interrupt mask */
+	int ireg;	/* clear interrupt register */
+	unsigned numa_id; /* numa node of this context */
+	/* verbs stats per CTX */
+	struct hfi1_opcode_stats_perctx *opstats;
+	/*
+	 * This is the kernel thread that will keep making
+	 * progress on the user sdma requests behind the scenes.
+	 * There is one per context (shared contexts use the master's).
+	 */
+	struct task_struct *progress;
+	struct list_head sdma_queues;
+	spinlock_t sdma_qlock;
+
+#ifdef CONFIG_PRESCAN_RXQ
+	struct ps_state ps_state;
+#endif /* CONFIG_PRESCAN_RXQ */
+
+	/*
+	 * The interrupt handler for a particular receive context can vary
+	 * throughout it's lifetime. This is not a lock protected data member so
+	 * it must be updated atomically and the prev and new value must always
+	 * be valid. Worst case is we process an extra interrupt and up to 64
+	 * packets with the wrong interrupt handler.
+	 */
+	void (*do_interrupt)(struct hfi1_ctxtdata *rcd);
+};
+
+/*
+ * Represents a single packet at a high level. Put commonly computed things in
+ * here so we do not have to keep doing them over and over. The rule of thumb is
+ * if something is used one time to derive some value, store that something in
+ * here. If it is used multiple times, then store the result of that derivation
+ * in here.
+ */
+struct hfi1_packet {
+	void *ebuf;
+	void *hdr;
+	struct hfi1_ctxtdata *rcd;
+	__le32 *rhf_addr;
+	struct hfi1_qp *qp;
+	struct hfi1_other_headers *ohdr;
+	u64 rhf;
+	u32 maxcnt;
+	u32 rhqoff;
+	u32 hdrqtail;
+	int numpkt;
+	u16 tlen;
+	u16 hlen;
+	s16 etail;
+	u16 rsize;
+	u8 updegr;
+	u8 rcv_flags;
+	u8 etype;
+};
+
+static inline bool has_sc4_bit(struct hfi1_packet *p)
+{
+	return !!rhf_dc_info(p->rhf);
+}
+
+/*
+ * Private data for snoop/capture support.
+ */
+struct hfi1_snoop_data {
+	int mode_flag;
+	struct cdev cdev;
+	struct device *class_dev;
+	spinlock_t snoop_lock;
+	struct list_head queue;
+	wait_queue_head_t waitq;
+	void *filter_value;
+	int (*filter_callback)(void *hdr, void *data, void *value);
+	u64 dcc_cfg; /* saved value of DCC Cfg register */
+};
+
+/* snoop mode_flag values */
+#define HFI1_PORT_SNOOP_MODE     1U
+#define HFI1_PORT_CAPTURE_MODE   2U
+
+struct hfi1_sge_state;
+
+/*
+ * Get/Set IB link-level config parameters for f_get/set_ib_cfg()
+ * Mostly for MADs that set or query link parameters, also ipath
+ * config interfaces
+ */
+#define HFI1_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */
+#define HFI1_IB_CFG_LWID_DG_ENB 1 /* allowed Link-width downgrade */
+#define HFI1_IB_CFG_LWID_ENB 2 /* allowed Link-width */
+#define HFI1_IB_CFG_LWID 3 /* currently active Link-width */
+#define HFI1_IB_CFG_SPD_ENB 4 /* allowed Link speeds */
+#define HFI1_IB_CFG_SPD 5 /* current Link spd */
+#define HFI1_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */
+#define HFI1_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */
+#define HFI1_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */
+#define HFI1_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */
+#define HFI1_IB_CFG_OP_VLS 10 /* operational VLs */
+#define HFI1_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */
+#define HFI1_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */
+#define HFI1_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */
+#define HFI1_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */
+#define HFI1_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */
+#define HFI1_IB_CFG_PKEYS 16 /* update partition keys */
+#define HFI1_IB_CFG_MTU 17 /* update MTU in IBC */
+#define HFI1_IB_CFG_VL_HIGH_LIMIT 19
+#define HFI1_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */
+#define HFI1_IB_CFG_PORT 21 /* switch port we are connected to */
+
+/*
+ * HFI or Host Link States
+ *
+ * These describe the states the driver thinks the logical and physical
+ * states are in.  Used as an argument to set_link_state().  Implemented
+ * as bits for easy multi-state checking.  The actual state can only be
+ * one.
+ */
+#define __HLS_UP_INIT_BP	0
+#define __HLS_UP_ARMED_BP	1
+#define __HLS_UP_ACTIVE_BP	2
+#define __HLS_DN_DOWNDEF_BP	3	/* link down default */
+#define __HLS_DN_POLL_BP	4
+#define __HLS_DN_DISABLE_BP	5
+#define __HLS_DN_OFFLINE_BP	6
+#define __HLS_VERIFY_CAP_BP	7
+#define __HLS_GOING_UP_BP	8
+#define __HLS_GOING_OFFLINE_BP  9
+#define __HLS_LINK_COOLDOWN_BP 10
+
+#define HLS_UP_INIT	  (1 << __HLS_UP_INIT_BP)
+#define HLS_UP_ARMED	  (1 << __HLS_UP_ARMED_BP)
+#define HLS_UP_ACTIVE	  (1 << __HLS_UP_ACTIVE_BP)
+#define HLS_DN_DOWNDEF	  (1 << __HLS_DN_DOWNDEF_BP) /* link down default */
+#define HLS_DN_POLL	  (1 << __HLS_DN_POLL_BP)
+#define HLS_DN_DISABLE	  (1 << __HLS_DN_DISABLE_BP)
+#define HLS_DN_OFFLINE	  (1 << __HLS_DN_OFFLINE_BP)
+#define HLS_VERIFY_CAP	  (1 << __HLS_VERIFY_CAP_BP)
+#define HLS_GOING_UP	  (1 << __HLS_GOING_UP_BP)
+#define HLS_GOING_OFFLINE (1 << __HLS_GOING_OFFLINE_BP)
+#define HLS_LINK_COOLDOWN (1 << __HLS_LINK_COOLDOWN_BP)
+
+#define HLS_UP (HLS_UP_INIT | HLS_UP_ARMED | HLS_UP_ACTIVE)
+
+/* use this MTU size if none other is given */
+#define HFI1_DEFAULT_ACTIVE_MTU 8192
+/* use this MTU size as the default maximum */
+#define HFI1_DEFAULT_MAX_MTU 8192
+/* default partition key */
+#define DEFAULT_PKEY 0xffff
+
+/*
+ * Possible fabric manager config parameters for fm_{get,set}_table()
+ */
+#define FM_TBL_VL_HIGH_ARB		1 /* Get/set VL high prio weights */
+#define FM_TBL_VL_LOW_ARB		2 /* Get/set VL low prio weights */
+#define FM_TBL_BUFFER_CONTROL		3 /* Get/set Buffer Control */
+#define FM_TBL_SC2VLNT			4 /* Get/set SC->VLnt */
+#define FM_TBL_VL_PREEMPT_ELEMS		5 /* Get (no set) VL preempt elems */
+#define FM_TBL_VL_PREEMPT_MATRIX	6 /* Get (no set) VL preempt matrix */
+
+/*
+ * Possible "operations" for f_rcvctrl(ppd, op, ctxt)
+ * these are bits so they can be combined, e.g.
+ * HFI1_RCVCTRL_INTRAVAIL_ENB | HFI1_RCVCTRL_CTXT_ENB
+ */
+#define HFI1_RCVCTRL_TAILUPD_ENB 0x01
+#define HFI1_RCVCTRL_TAILUPD_DIS 0x02
+#define HFI1_RCVCTRL_CTXT_ENB 0x04
+#define HFI1_RCVCTRL_CTXT_DIS 0x08
+#define HFI1_RCVCTRL_INTRAVAIL_ENB 0x10
+#define HFI1_RCVCTRL_INTRAVAIL_DIS 0x20
+#define HFI1_RCVCTRL_PKEY_ENB 0x40  /* Note, default is enabled */
+#define HFI1_RCVCTRL_PKEY_DIS 0x80
+#define HFI1_RCVCTRL_TIDFLOW_ENB 0x0400
+#define HFI1_RCVCTRL_TIDFLOW_DIS 0x0800
+#define HFI1_RCVCTRL_ONE_PKT_EGR_ENB 0x1000
+#define HFI1_RCVCTRL_ONE_PKT_EGR_DIS 0x2000
+#define HFI1_RCVCTRL_NO_RHQ_DROP_ENB 0x4000
+#define HFI1_RCVCTRL_NO_RHQ_DROP_DIS 0x8000
+#define HFI1_RCVCTRL_NO_EGR_DROP_ENB 0x10000
+#define HFI1_RCVCTRL_NO_EGR_DROP_DIS 0x20000
+
+/* partition enforcement flags */
+#define HFI1_PART_ENFORCE_IN	0x1
+#define HFI1_PART_ENFORCE_OUT	0x2
+
+/* how often we check for synthetic counter wrap around */
+#define SYNTH_CNT_TIME 2
+
+/* Counter flags */
+#define CNTR_NORMAL		0x0 /* Normal counters, just read register */
+#define CNTR_SYNTH		0x1 /* Synthetic counters, saturate at all 1s */
+#define CNTR_DISABLED		0x2 /* Disable this counter */
+#define CNTR_32BIT		0x4 /* Simulate 64 bits for this counter */
+#define CNTR_VL			0x8 /* Per VL counter */
+#define CNTR_INVALID_VL		-1  /* Specifies invalid VL */
+#define CNTR_MODE_W		0x0
+#define CNTR_MODE_R		0x1
+
+/* VLs Supported/Operational */
+#define HFI1_MIN_VLS_SUPPORTED 1
+#define HFI1_MAX_VLS_SUPPORTED 8
+
+static inline void incr_cntr64(u64 *cntr)
+{
+	if (*cntr < (u64)-1LL)
+		(*cntr)++;
+}
+
+static inline void incr_cntr32(u32 *cntr)
+{
+	if (*cntr < (u32)-1LL)
+		(*cntr)++;
+}
+
+#define MAX_NAME_SIZE 64
+struct hfi1_msix_entry {
+	struct msix_entry msix;
+	void *arg;
+	char name[MAX_NAME_SIZE];
+	cpumask_var_t mask;
+};
+
+/* per-SL CCA information */
+struct cca_timer {
+	struct hrtimer hrtimer;
+	struct hfi1_pportdata *ppd; /* read-only */
+	int sl; /* read-only */
+	u16 ccti; /* read/write - current value of CCTI */
+};
+
+struct link_down_reason {
+	/*
+	 * SMA-facing value.  Should be set from .latest when
+	 * HLS_UP_* -> HLS_DN_* transition actually occurs.
+	 */
+	u8 sma;
+	u8 latest;
+};
+
+enum {
+	LO_PRIO_TABLE,
+	HI_PRIO_TABLE,
+	MAX_PRIO_TABLE
+};
+
+struct vl_arb_cache {
+	spinlock_t lock;
+	struct ib_vl_weight_elem table[VL_ARB_TABLE_SIZE];
+};
+
+/*
+ * The structure below encapsulates data relevant to a physical IB Port.
+ * Current chips support only one such port, but the separation
+ * clarifies things a bit. Note that to conform to IB conventions,
+ * port-numbers are one-based. The first or only port is port1.
+ */
+struct hfi1_pportdata {
+	struct hfi1_ibport ibport_data;
+
+	struct hfi1_devdata *dd;
+	struct kobject pport_cc_kobj;
+	struct kobject sc2vl_kobj;
+	struct kobject sl2sc_kobj;
+	struct kobject vl2mtu_kobj;
+
+	/* QSFP support */
+	struct qsfp_data qsfp_info;
+
+	/* GUID for this interface, in host order */
+	u64 guid;
+	/* GUID for peer interface, in host order */
+	u64 neighbor_guid;
+
+	/* up or down physical link state */
+	u32 linkup;
+
+	/*
+	 * this address is mapped read-only into user processes so they can
+	 * get status cheaply, whenever they want.  One qword of status per port
+	 */
+	u64 *statusp;
+
+	/* SendDMA related entries */
+
+	struct workqueue_struct *hfi1_wq;
+
+	/* move out of interrupt context */
+	struct work_struct link_vc_work;
+	struct work_struct link_up_work;
+	struct work_struct link_down_work;
+	struct work_struct sma_message_work;
+	struct work_struct freeze_work;
+	struct work_struct link_downgrade_work;
+	struct work_struct link_bounce_work;
+	/* host link state variables */
+	struct mutex hls_lock;
+	u32 host_link_state;
+
+	spinlock_t            sdma_alllock ____cacheline_aligned_in_smp;
+
+	u32 lstate;	/* logical link state */
+
+	/* these are the "32 bit" regs */
+
+	u32 ibmtu; /* The MTU programmed for this unit */
+	/*
+	 * Current max size IB packet (in bytes) including IB headers, that
+	 * we can send. Changes when ibmtu changes.
+	 */
+	u32 ibmaxlen;
+	u32 current_egress_rate; /* units [10^6 bits/sec] */
+	/* LID programmed for this instance */
+	u16 lid;
+	/* list of pkeys programmed; 0 if not set */
+	u16 pkeys[MAX_PKEY_VALUES];
+	u16 link_width_supported;
+	u16 link_width_downgrade_supported;
+	u16 link_speed_supported;
+	u16 link_width_enabled;
+	u16 link_width_downgrade_enabled;
+	u16 link_speed_enabled;
+	u16 link_width_active;
+	u16 link_width_downgrade_tx_active;
+	u16 link_width_downgrade_rx_active;
+	u16 link_speed_active;
+	u8 vls_supported;
+	u8 vls_operational;
+	/* LID mask control */
+	u8 lmc;
+	/* Rx Polarity inversion (compensate for ~tx on partner) */
+	u8 rx_pol_inv;
+
+	u8 hw_pidx;     /* physical port index */
+	u8 port;        /* IB port number and index into dd->pports - 1 */
+	/* type of neighbor node */
+	u8 neighbor_type;
+	u8 neighbor_normal;
+	u8 neighbor_fm_security; /* 1 if firmware checking is disabled */
+	u8 neighbor_port_number;
+	u8 is_sm_config_started;
+	u8 offline_disabled_reason;
+	u8 is_active_optimize_enabled;
+	u8 driver_link_ready;	/* driver ready for active link */
+	u8 link_enabled;	/* link enabled? */
+	u8 linkinit_reason;
+	u8 local_tx_rate;	/* rate given to 8051 firmware */
+
+	/* placeholders for IB MAD packet settings */
+	u8 overrun_threshold;
+	u8 phy_error_threshold;
+
+	/* used to override LED behavior */
+	u8 led_override;  /* Substituted for normal value, if non-zero */
+	u16 led_override_timeoff; /* delta to next timer event */
+	u8 led_override_vals[2]; /* Alternates per blink-frame */
+	u8 led_override_phase; /* Just counts, LSB picks from vals[] */
+	atomic_t led_override_timer_active;
+	/* Used to flash LEDs in override mode */
+	struct timer_list led_override_timer;
+	u32 sm_trap_qp;
+	u32 sa_qp;
+
+	/*
+	 * cca_timer_lock protects access to the per-SL cca_timer
+	 * structures (specifically the ccti member).
+	 */
+	spinlock_t cca_timer_lock ____cacheline_aligned_in_smp;
+	struct cca_timer cca_timer[OPA_MAX_SLS];
+
+	/* List of congestion control table entries */
+	struct ib_cc_table_entry_shadow ccti_entries[CC_TABLE_SHADOW_MAX];
+
+	/* congestion entries, each entry corresponding to a SL */
+	struct opa_congestion_setting_entry_shadow
+		congestion_entries[OPA_MAX_SLS];
+
+	/*
+	 * cc_state_lock protects (write) access to the per-port
+	 * struct cc_state.
+	 */
+	spinlock_t cc_state_lock ____cacheline_aligned_in_smp;
+
+	struct cc_state __rcu *cc_state;
+
+	/* Total number of congestion control table entries */
+	u16 total_cct_entry;
+
+	/* Bit map identifying service level */
+	u32 cc_sl_control_map;
+
+	/* CA's max number of 64 entry units in the congestion control table */
+	u8 cc_max_table_entries;
+
+	/* begin congestion log related entries
+	 * cc_log_lock protects all congestion log related data */
+	spinlock_t cc_log_lock ____cacheline_aligned_in_smp;
+	u8 threshold_cong_event_map[OPA_MAX_SLS/8];
+	u16 threshold_event_counter;
+	struct opa_hfi1_cong_log_event_internal cc_events[OPA_CONG_LOG_ELEMS];
+	int cc_log_idx; /* index for logging events */
+	int cc_mad_idx; /* index for reporting events */
+	/* end congestion log related entries */
+
+	struct vl_arb_cache vl_arb_cache[MAX_PRIO_TABLE];
+
+	/* port relative counter buffer */
+	u64 *cntrs;
+	/* port relative synthetic counter buffer */
+	u64 *scntrs;
+	/* we synthesize port_xmit_discards from several egress errors */
+	u64 port_xmit_discards;
+	u64 port_xmit_constraint_errors;
+	u64 port_rcv_constraint_errors;
+	/* count of 'link_err' interrupts from DC */
+	u64 link_downed;
+	/* number of times link retrained successfully */
+	u64 link_up;
+	/* port_ltp_crc_mode is returned in 'portinfo' MADs */
+	u16 port_ltp_crc_mode;
+	/* port_crc_mode_enabled is the crc we support */
+	u8 port_crc_mode_enabled;
+	/* mgmt_allowed is also returned in 'portinfo' MADs */
+	u8 mgmt_allowed;
+	u8 part_enforce; /* partition enforcement flags */
+	struct link_down_reason local_link_down_reason;
+	struct link_down_reason neigh_link_down_reason;
+	/* Value to be sent to link peer on LinkDown .*/
+	u8 remote_link_down_reason;
+	/* Error events that will cause a port bounce. */
+	u32 port_error_action;
+};
+
+typedef int (*rhf_rcv_function_ptr)(struct hfi1_packet *packet);
+
+typedef void (*opcode_handler)(struct hfi1_packet *packet);
+
+/* return values for the RHF receive functions */
+#define RHF_RCV_CONTINUE  0	/* keep going */
+#define RHF_RCV_DONE	  1	/* stop, this packet processed */
+#define RHF_RCV_REPROCESS 2	/* stop. retain this packet */
+
+struct rcv_array_data {
+	u8 group_size;
+	u16 ngroups;
+	u16 nctxt_extra;
+};
+
+struct per_vl_data {
+	u16 mtu;
+	struct send_context *sc;
+};
+
+/* 16 to directly index */
+#define PER_VL_SEND_CONTEXTS 16
+
+struct err_info_rcvport {
+	u8 status_and_code;
+	u64 packet_flit1;
+	u64 packet_flit2;
+};
+
+struct err_info_constraint {
+	u8 status;
+	u16 pkey;
+	u32 slid;
+};
+
+struct hfi1_temp {
+	unsigned int curr;       /* current temperature */
+	unsigned int lo_lim;     /* low temperature limit */
+	unsigned int hi_lim;     /* high temperature limit */
+	unsigned int crit_lim;   /* critical temperature limit */
+	u8 triggers;      /* temperature triggers */
+};
+
+/* device data struct now contains only "general per-device" info.
+ * fields related to a physical IB port are in a hfi1_pportdata struct.
+ */
+struct sdma_engine;
+struct sdma_vl_map;
+
+#define BOARD_VERS_MAX 96 /* how long the version string can be */
+#define SERIAL_MAX 16 /* length of the serial number */
+
+struct hfi1_devdata {
+	struct hfi1_ibdev verbs_dev;     /* must be first */
+	struct list_head list;
+	/* pointers to related structs for this device */
+	/* pci access data structure */
+	struct pci_dev *pcidev;
+	struct cdev user_cdev;
+	struct cdev diag_cdev;
+	struct cdev ui_cdev;
+	struct device *user_device;
+	struct device *diag_device;
+	struct device *ui_device;
+
+	/* mem-mapped pointer to base of chip regs */
+	u8 __iomem *kregbase;
+	/* end of mem-mapped chip space excluding sendbuf and user regs */
+	u8 __iomem *kregend;
+	/* physical address of chip for io_remap, etc. */
+	resource_size_t physaddr;
+	/* receive context data */
+	struct hfi1_ctxtdata **rcd;
+	/* send context data */
+	struct send_context_info *send_contexts;
+	/* map hardware send contexts to software index */
+	u8 *hw_to_sw;
+	/* spinlock for allocating and releasing send context resources */
+	spinlock_t sc_lock;
+	/* Per VL data. Enough for all VLs but not all elements are set/used. */
+	struct per_vl_data vld[PER_VL_SEND_CONTEXTS];
+	/* seqlock for sc2vl */
+	seqlock_t sc2vl_lock;
+	u64 sc2vl[4];
+	/* Send Context initialization lock. */
+	spinlock_t sc_init_lock;
+
+	/* fields common to all SDMA engines */
+
+	/* default flags to last descriptor */
+	u64 default_desc1;
+	volatile __le64                    *sdma_heads_dma; /* DMA'ed by chip */
+	dma_addr_t                          sdma_heads_phys;
+	void                               *sdma_pad_dma; /* DMA'ed by chip */
+	dma_addr_t                          sdma_pad_phys;
+	/* for deallocation */
+	size_t                              sdma_heads_size;
+	/* number from the chip */
+	u32                                 chip_sdma_engines;
+	/* num used */
+	u32                                 num_sdma;
+	/* lock for sdma_map */
+	spinlock_t                          sde_map_lock;
+	/* array of engines sized by num_sdma */
+	struct sdma_engine                 *per_sdma;
+	/* array of vl maps */
+	struct sdma_vl_map __rcu           *sdma_map;
+	/* SPC freeze waitqueue and variable */
+	wait_queue_head_t		  sdma_unfreeze_wq;
+	atomic_t			  sdma_unfreeze_count;
+
+
+	/* hfi1_pportdata, points to array of (physical) port-specific
+	 * data structs, indexed by pidx (0..n-1)
+	 */
+	struct hfi1_pportdata *pport;
+
+	/* mem-mapped pointer to base of PIO buffers */
+	void __iomem *piobase;
+	/*
+	 * write-combining mem-mapped pointer to base of RcvArray
+	 * memory.
+	 */
+	void __iomem *rcvarray_wc;
+	/*
+	 * credit return base - a per-NUMA range of DMA address that
+	 * the chip will use to update the per-context free counter
+	 */
+	struct credit_return_base *cr_base;
+
+	/* send context numbers and sizes for each type */
+	struct sc_config_sizes sc_sizes[SC_MAX];
+
+	u32 lcb_access_count;		/* count of LCB users */
+
+	char *boardname; /* human readable board info */
+
+	/* device (not port) flags, basically device capabilities */
+	u32 flags;
+
+	/* reset value */
+	u64 z_int_counter;
+	u64 z_rcv_limit;
+	/* percpu int_counter */
+	u64 __percpu *int_counter;
+	u64 __percpu *rcv_limit;
+
+	/* number of receive contexts in use by the driver */
+	u32 num_rcv_contexts;
+	/* number of pio send contexts in use by the driver */
+	u32 num_send_contexts;
+	/*
+	 * number of ctxts available for PSM open
+	 */
+	u32 freectxts;
+	/* base receive interrupt timeout, in CSR units */
+	u32 rcv_intr_timeout_csr;
+
+	u64 __iomem *egrtidbase;
+	spinlock_t sendctrl_lock; /* protect changes to SendCtrl */
+	spinlock_t rcvctrl_lock; /* protect changes to RcvCtrl */
+	/* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */
+	spinlock_t uctxt_lock; /* rcd and user context changes */
+	/* exclusive access to 8051 */
+	spinlock_t dc8051_lock;
+	/* exclusive access to 8051 memory */
+	spinlock_t dc8051_memlock;
+	int dc8051_timed_out;	/* remember if the 8051 timed out */
+	/*
+	 * A page that will hold event notification bitmaps for all
+	 * contexts. This page will be mapped into all processes.
+	 */
+	unsigned long *events;
+	/*
+	 * per unit status, see also portdata statusp
+	 * mapped read-only into user processes so they can get unit and
+	 * IB link status cheaply
+	 */
+	struct hfi1_status *status;
+	u32 freezelen; /* max length of freezemsg */
+
+	/* revision register shadow */
+	u64 revision;
+	/* Base GUID for device (network order) */
+	u64 base_guid;
+
+	/* these are the "32 bit" regs */
+
+	/* value we put in kr_rcvhdrsize */
+	u32 rcvhdrsize;
+	/* number of receive contexts the chip supports */
+	u32 chip_rcv_contexts;
+	/* number of receive array entries */
+	u32 chip_rcv_array_count;
+	/* number of PIO send contexts the chip supports */
+	u32 chip_send_contexts;
+	/* number of bytes in the PIO memory buffer */
+	u32 chip_pio_mem_size;
+	/* number of bytes in the SDMA memory buffer */
+	u32 chip_sdma_mem_size;
+
+	/* size of each rcvegrbuffer */
+	u32 rcvegrbufsize;
+	/* log2 of above */
+	u16 rcvegrbufsize_shift;
+	/* both sides of the PCIe link are gen3 capable */
+	u8 link_gen3_capable;
+	/* localbus width (1, 2,4,8,16,32) from config space  */
+	u32 lbus_width;
+	/* localbus speed in MHz */
+	u32 lbus_speed;
+	int unit; /* unit # of this chip */
+	int node; /* home node of this chip */
+
+	/* save these PCI fields to restore after a reset */
+	u32 pcibar0;
+	u32 pcibar1;
+	u32 pci_rom;
+	u16 pci_command;
+	u16 pcie_devctl;
+	u16 pcie_lnkctl;
+	u16 pcie_devctl2;
+	u32 pci_msix0;
+	u32 pci_lnkctl3;
+	u32 pci_tph2;
+
+	/*
+	 * ASCII serial number, from flash, large enough for original
+	 * all digit strings, and longer serial number format
+	 */
+	u8 serial[SERIAL_MAX];
+	/* human readable board version */
+	u8 boardversion[BOARD_VERS_MAX];
+	u8 lbus_info[32]; /* human readable localbus info */
+	/* chip major rev, from CceRevision */
+	u8 majrev;
+	/* chip minor rev, from CceRevision */
+	u8 minrev;
+	/* hardware ID */
+	u8 hfi1_id;
+	/* implementation code */
+	u8 icode;
+	/* default link down value (poll/sleep) */
+	u8 link_default;
+	/* vAU of this device */
+	u8 vau;
+	/* vCU of this device */
+	u8 vcu;
+	/* link credits of this device */
+	u16 link_credits;
+	/* initial vl15 credits to use */
+	u16 vl15_init;
+
+	/* Misc small ints */
+	/* Number of physical ports available */
+	u8 num_pports;
+	/* Lowest context number which can be used by user processes */
+	u8 first_user_ctxt;
+	u8 n_krcv_queues;
+	u8 qos_shift;
+	u8 qpn_mask;
+
+	u16 rhf_offset; /* offset of RHF within receive header entry */
+	u16 irev;	/* implementation revision */
+	u16 dc8051_ver; /* 8051 firmware version */
+
+	struct platform_config_cache pcfg_cache;
+	/* control high-level access to qsfp */
+	struct mutex qsfp_i2c_mutex;
+
+	struct diag_client *diag_client;
+	spinlock_t hfi1_diag_trans_lock; /* protect diag observer ops */
+
+	u8 psxmitwait_supported;
+	/* cycle length of PS* counters in HW (in picoseconds) */
+	u16 psxmitwait_check_rate;
+	/* high volume overflow errors deferred to tasklet */
+	struct tasklet_struct error_tasklet;
+	/* per device cq worker */
+	struct kthread_worker *worker;
+
+	/* MSI-X information */
+	struct hfi1_msix_entry *msix_entries;
+	u32 num_msix_entries;
+
+	/* INTx information */
+	u32 requested_intx_irq;		/* did we request one? */
+	char intx_name[MAX_NAME_SIZE];	/* INTx name */
+
+	/* general interrupt: mask of handled interrupts */
+	u64 gi_mask[CCE_NUM_INT_CSRS];
+
+	struct rcv_array_data rcv_entries;
+
+	/*
+	 * 64 bit synthetic counters
+	 */
+	struct timer_list synth_stats_timer;
+
+	/*
+	 * device counters
+	 */
+	char *cntrnames;
+	size_t cntrnameslen;
+	size_t ndevcntrs;
+	u64 *cntrs;
+	u64 *scntrs;
+
+	/*
+	 * remembered values for synthetic counters
+	 */
+	u64 last_tx;
+	u64 last_rx;
+
+	/*
+	 * per-port counters
+	 */
+	size_t nportcntrs;
+	char *portcntrnames;
+	size_t portcntrnameslen;
+
+	struct hfi1_snoop_data hfi1_snoop;
+
+	struct err_info_rcvport err_info_rcvport;
+	struct err_info_constraint err_info_rcv_constraint;
+	struct err_info_constraint err_info_xmit_constraint;
+	u8 err_info_uncorrectable;
+	u8 err_info_fmconfig;
+
+	atomic_t drop_packet;
+	u8 do_drop;
+
+	/* receive interrupt functions */
+	rhf_rcv_function_ptr *rhf_rcv_function_map;
+	rhf_rcv_function_ptr normal_rhf_rcv_functions[8];
+
+	/*
+	 * Handlers for outgoing data so that snoop/capture does not
+	 * have to have its hooks in the send path
+	 */
+	int (*process_pio_send)(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr,
+				u32 hdrwords, struct hfi1_sge_state *ss,
+				u32 len, u32 plen, u32 dwords, u64 pbc);
+	int (*process_dma_send)(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr,
+				u32 hdrwords, struct hfi1_sge_state *ss,
+				u32 len, u32 plen, u32 dwords, u64 pbc);
+	void (*pio_inline_send)(struct hfi1_devdata *dd, struct pio_buf *pbuf,
+				u64 pbc, const void *from, size_t count);
+
+	/* OUI comes from the HW. Used everywhere as 3 separate bytes. */
+	u8 oui1;
+	u8 oui2;
+	u8 oui3;
+	/* Timer and counter used to detect RcvBufOvflCnt changes */
+	struct timer_list rcverr_timer;
+	u32 rcv_ovfl_cnt;
+
+	int assigned_node_id;
+	wait_queue_head_t event_queue;
+
+	/* Save the enabled LCB error bits */
+	u64 lcb_err_en;
+	u8 dc_shutdown;
+};
+
+/* 8051 firmware version helper */
+#define dc8051_ver(a, b) ((a) << 8 | (b))
+
+/* f_put_tid types */
+#define PT_EXPECTED 0
+#define PT_EAGER    1
+#define PT_INVALID  2
+
+/* Private data for file operations */
+struct hfi1_filedata {
+	struct hfi1_ctxtdata *uctxt;
+	unsigned subctxt;
+	struct hfi1_user_sdma_comp_q *cq;
+	struct hfi1_user_sdma_pkt_q *pq;
+	/* for cpu affinity; -1 if none */
+	int rec_cpu_num;
+};
+
+extern struct list_head hfi1_dev_list;
+extern spinlock_t hfi1_devs_lock;
+struct hfi1_devdata *hfi1_lookup(int unit);
+extern u32 hfi1_cpulist_count;
+extern unsigned long *hfi1_cpulist;
+
+extern unsigned int snoop_drop_send;
+extern unsigned int snoop_force_capture;
+int hfi1_init(struct hfi1_devdata *, int);
+int hfi1_count_units(int *npresentp, int *nupp);
+int hfi1_count_active_units(void);
+
+int hfi1_diag_add(struct hfi1_devdata *);
+void hfi1_diag_remove(struct hfi1_devdata *);
+void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup);
+
+void handle_user_interrupt(struct hfi1_ctxtdata *rcd);
+
+int hfi1_create_rcvhdrq(struct hfi1_devdata *, struct hfi1_ctxtdata *);
+int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *);
+int hfi1_create_ctxts(struct hfi1_devdata *dd);
+struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *, u32);
+void hfi1_init_pportdata(struct pci_dev *, struct hfi1_pportdata *,
+			 struct hfi1_devdata *, u8, u8);
+void hfi1_free_ctxtdata(struct hfi1_devdata *, struct hfi1_ctxtdata *);
+
+void handle_receive_interrupt(struct hfi1_ctxtdata *);
+void handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *rcd);
+void handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata *rcd);
+int hfi1_reset_device(int);
+
+/* return the driver's idea of the logical OPA port state */
+static inline u32 driver_lstate(struct hfi1_pportdata *ppd)
+{
+	return ppd->lstate; /* use the cached value */
+}
+
+static inline u16 generate_jkey(kuid_t uid)
+{
+	return from_kuid(current_user_ns(), uid) & 0xffff;
+}
+
+/*
+ * active_egress_rate
+ *
+ * returns the active egress rate in units of [10^6 bits/sec]
+ */
+static inline u32 active_egress_rate(struct hfi1_pportdata *ppd)
+{
+	u16 link_speed = ppd->link_speed_active;
+	u16 link_width = ppd->link_width_active;
+	u32 egress_rate;
+
+	if (link_speed == OPA_LINK_SPEED_25G)
+		egress_rate = 25000;
+	else /* assume OPA_LINK_SPEED_12_5G */
+		egress_rate = 12500;
+
+	switch (link_width) {
+	case OPA_LINK_WIDTH_4X:
+		egress_rate *= 4;
+		break;
+	case OPA_LINK_WIDTH_3X:
+		egress_rate *= 3;
+		break;
+	case OPA_LINK_WIDTH_2X:
+		egress_rate *= 2;
+		break;
+	default:
+		/* assume IB_WIDTH_1X */
+		break;
+	}
+
+	return egress_rate;
+}
+
+/*
+ * egress_cycles
+ *
+ * Returns the number of 'fabric clock cycles' to egress a packet
+ * of length 'len' bytes, at 'rate' Mbit/s. Since the fabric clock
+ * rate is (approximately) 805 MHz, the units of the returned value
+ * are (1/805 MHz).
+ */
+static inline u32 egress_cycles(u32 len, u32 rate)
+{
+	u32 cycles;
+
+	/*
+	 * cycles is:
+	 *
+	 *          (length) [bits] / (rate) [bits/sec]
+	 *  ---------------------------------------------------
+	 *  fabric_clock_period == 1 /(805 * 10^6) [cycles/sec]
+	 */
+
+	cycles = len * 8; /* bits */
+	cycles *= 805;
+	cycles /= rate;
+
+	return cycles;
+}
+
+void set_link_ipg(struct hfi1_pportdata *ppd);
+void process_becn(struct hfi1_pportdata *ppd, u8 sl,  u16 rlid, u32 lqpn,
+		  u32 rqpn, u8 svc_type);
+void return_cnp(struct hfi1_ibport *ibp, struct hfi1_qp *qp, u32 remote_qpn,
+		u32 pkey, u32 slid, u32 dlid, u8 sc5,
+		const struct ib_grh *old_grh);
+
+#define PACKET_EGRESS_TIMEOUT 350
+static inline void pause_for_credit_return(struct hfi1_devdata *dd)
+{
+	/* Pause at least 1us, to ensure chip returns all credits */
+	u32 usec = cclock_to_ns(dd, PACKET_EGRESS_TIMEOUT) / 1000;
+
+	udelay(usec ? usec : 1);
+}
+
+/**
+ * sc_to_vlt() reverse lookup sc to vl
+ * @dd - devdata
+ * @sc5 - 5 bit sc
+ */
+static inline u8 sc_to_vlt(struct hfi1_devdata *dd, u8 sc5)
+{
+	unsigned seq;
+	u8 rval;
+
+	if (sc5 >= OPA_MAX_SCS)
+		return (u8)(0xff);
+
+	do {
+		seq = read_seqbegin(&dd->sc2vl_lock);
+		rval = *(((u8 *)dd->sc2vl) + sc5);
+	} while (read_seqretry(&dd->sc2vl_lock, seq));
+
+	return rval;
+}
+
+#define PKEY_MEMBER_MASK 0x8000
+#define PKEY_LOW_15_MASK 0x7fff
+
+/*
+ * ingress_pkey_matches_entry - return 1 if the pkey matches ent (ent
+ * being an entry from the ingress partition key table), return 0
+ * otherwise. Use the matching criteria for ingress partition keys
+ * specified in the OPAv1 spec., section 9.10.14.
+ */
+static inline int ingress_pkey_matches_entry(u16 pkey, u16 ent)
+{
+	u16 mkey = pkey & PKEY_LOW_15_MASK;
+	u16 ment = ent & PKEY_LOW_15_MASK;
+
+	if (mkey == ment) {
+		/*
+		 * If pkey[15] is clear (limited partition member),
+		 * is bit 15 in the corresponding table element
+		 * clear (limited member)?
+		 */
+		if (!(pkey & PKEY_MEMBER_MASK))
+			return !!(ent & PKEY_MEMBER_MASK);
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * ingress_pkey_table_search - search the entire pkey table for
+ * an entry which matches 'pkey'. return 0 if a match is found,
+ * and 1 otherwise.
+ */
+static int ingress_pkey_table_search(struct hfi1_pportdata *ppd, u16 pkey)
+{
+	int i;
+
+	for (i = 0; i < MAX_PKEY_VALUES; i++) {
+		if (ingress_pkey_matches_entry(pkey, ppd->pkeys[i]))
+			return 0;
+	}
+	return 1;
+}
+
+/*
+ * ingress_pkey_table_fail - record a failure of ingress pkey validation,
+ * i.e., increment port_rcv_constraint_errors for the port, and record
+ * the 'error info' for this failure.
+ */
+static void ingress_pkey_table_fail(struct hfi1_pportdata *ppd, u16 pkey,
+				    u16 slid)
+{
+	struct hfi1_devdata *dd = ppd->dd;
+
+	incr_cntr64(&ppd->port_rcv_constraint_errors);
+	if (!(dd->err_info_rcv_constraint.status & OPA_EI_STATUS_SMASK)) {
+		dd->err_info_rcv_constraint.status |= OPA_EI_STATUS_SMASK;
+		dd->err_info_rcv_constraint.slid = slid;
+		dd->err_info_rcv_constraint.pkey = pkey;
+	}
+}
+
+/*
+ * ingress_pkey_check - Return 0 if the ingress pkey is valid, return 1
+ * otherwise. Use the criteria in the OPAv1 spec, section 9.10.14. idx
+ * is a hint as to the best place in the partition key table to begin
+ * searching. This function should not be called on the data path because
+ * of performance reasons. On datapath pkey check is expected to be done
+ * by HW and rcv_pkey_check function should be called instead.
+ */
+static inline int ingress_pkey_check(struct hfi1_pportdata *ppd, u16 pkey,
+				     u8 sc5, u8 idx, u16 slid)
+{
+	if (!(ppd->part_enforce & HFI1_PART_ENFORCE_IN))
+		return 0;
+
+	/* If SC15, pkey[0:14] must be 0x7fff */
+	if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK))
+		goto bad;
+
+	/* Is the pkey = 0x0, or 0x8000? */
+	if ((pkey & PKEY_LOW_15_MASK) == 0)
+		goto bad;
+
+	/* The most likely matching pkey has index 'idx' */
+	if (ingress_pkey_matches_entry(pkey, ppd->pkeys[idx]))
+		return 0;
+
+	/* no match - try the whole table */
+	if (!ingress_pkey_table_search(ppd, pkey))
+		return 0;
+
+bad:
+	ingress_pkey_table_fail(ppd, pkey, slid);
+	return 1;
+}
+
+/*
+ * rcv_pkey_check - Return 0 if the ingress pkey is valid, return 1
+ * otherwise. It only ensures pkey is vlid for QP0. This function
+ * should be called on the data path instead of ingress_pkey_check
+ * as on data path, pkey check is done by HW (except for QP0).
+ */
+static inline int rcv_pkey_check(struct hfi1_pportdata *ppd, u16 pkey,
+				 u8 sc5, u16 slid)
+{
+	if (!(ppd->part_enforce & HFI1_PART_ENFORCE_IN))
+		return 0;
+
+	/* If SC15, pkey[0:14] must be 0x7fff */
+	if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK))
+		goto bad;
+
+	return 0;
+bad:
+	ingress_pkey_table_fail(ppd, pkey, slid);
+	return 1;
+}
+
+/* MTU handling */
+
+/* MTU enumeration, 256-4k match IB */
+#define OPA_MTU_0     0
+#define OPA_MTU_256   1
+#define OPA_MTU_512   2
+#define OPA_MTU_1024  3
+#define OPA_MTU_2048  4
+#define OPA_MTU_4096  5
+
+u32 lrh_max_header_bytes(struct hfi1_devdata *dd);
+int mtu_to_enum(u32 mtu, int default_if_bad);
+u16 enum_to_mtu(int);
+static inline int valid_ib_mtu(unsigned int mtu)
+{
+	return mtu == 256 || mtu == 512 ||
+		mtu == 1024 || mtu == 2048 ||
+		mtu == 4096;
+}
+static inline int valid_opa_max_mtu(unsigned int mtu)
+{
+	return mtu >= 2048 &&
+		(valid_ib_mtu(mtu) || mtu == 8192 || mtu == 10240);
+}
+
+int set_mtu(struct hfi1_pportdata *);
+
+int hfi1_set_lid(struct hfi1_pportdata *, u32, u8);
+void hfi1_disable_after_error(struct hfi1_devdata *);
+int hfi1_set_uevent_bits(struct hfi1_pportdata *, const int);
+int hfi1_rcvbuf_validate(u32, u8, u16 *);
+
+int fm_get_table(struct hfi1_pportdata *, int, void *);
+int fm_set_table(struct hfi1_pportdata *, int, void *);
+
+void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf);
+void reset_link_credits(struct hfi1_devdata *dd);
+void assign_remote_cm_au_table(struct hfi1_devdata *dd, u8 vcu);
+
+int snoop_recv_handler(struct hfi1_packet *packet);
+int snoop_send_dma_handler(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr,
+			   u32 hdrwords, struct hfi1_sge_state *ss, u32 len,
+			   u32 plen, u32 dwords, u64 pbc);
+int snoop_send_pio_handler(struct hfi1_qp *qp, struct ahg_ib_header *ibhdr,
+			   u32 hdrwords, struct hfi1_sge_state *ss, u32 len,
+			   u32 plen, u32 dwords, u64 pbc);
+void snoop_inline_pio_send(struct hfi1_devdata *dd, struct pio_buf *pbuf,
+			   u64 pbc, const void *from, size_t count);
+
+/* for use in system calls, where we want to know device type, etc. */
+#define ctxt_fp(fp) \
+	(((struct hfi1_filedata *)(fp)->private_data)->uctxt)
+#define subctxt_fp(fp) \
+	(((struct hfi1_filedata *)(fp)->private_data)->subctxt)
+#define tidcursor_fp(fp) \
+	(((struct hfi1_filedata *)(fp)->private_data)->tidcursor)
+#define user_sdma_pkt_fp(fp) \
+	(((struct hfi1_filedata *)(fp)->private_data)->pq)
+#define user_sdma_comp_fp(fp) \
+	(((struct hfi1_filedata *)(fp)->private_data)->cq)
+
+static inline struct hfi1_devdata *dd_from_ppd(struct hfi1_pportdata *ppd)
+{
+	return ppd->dd;
+}
+
+static inline struct hfi1_devdata *dd_from_dev(struct hfi1_ibdev *dev)
+{
+	return container_of(dev, struct hfi1_devdata, verbs_dev);
+}
+
+static inline struct hfi1_devdata *dd_from_ibdev(struct ib_device *ibdev)
+{
+	return dd_from_dev(to_idev(ibdev));
+}
+
+static inline struct hfi1_pportdata *ppd_from_ibp(struct hfi1_ibport *ibp)
+{
+	return container_of(ibp, struct hfi1_pportdata, ibport_data);
+}
+
+static inline struct hfi1_ibport *to_iport(struct ib_device *ibdev, u8 port)
+{
+	struct hfi1_devdata *dd = dd_from_ibdev(ibdev);
+	unsigned pidx = port - 1; /* IB number port from 1, hdw from 0 */
+
+	WARN_ON(pidx >= dd->num_pports);
+	return &dd->pport[pidx].ibport_data;
+}
+
+/*
+ * Return the indexed PKEY from the port PKEY table.
+ */
+static inline u16 hfi1_get_pkey(struct hfi1_ibport *ibp, unsigned index)
+{
+	struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
+	u16 ret;
+
+	if (index >= ARRAY_SIZE(ppd->pkeys))
+		ret = 0;
+	else
+		ret = ppd->pkeys[index];
+
+	return ret;
+}
+
+/*
+ * Readers of cc_state must call get_cc_state() under rcu_read_lock().
+ * Writers of cc_state must call get_cc_state() under cc_state_lock.
+ */
+static inline struct cc_state *get_cc_state(struct hfi1_pportdata *ppd)
+{
+	return rcu_dereference(ppd->cc_state);
+}
+
+/*
+ * values for dd->flags (_device_ related flags)
+ */
+#define HFI1_INITTED           0x1    /* chip and driver up and initted */
+#define HFI1_PRESENT           0x2    /* chip accesses can be done */
+#define HFI1_FROZEN            0x4    /* chip in SPC freeze */
+#define HFI1_HAS_SDMA_TIMEOUT  0x8
+#define HFI1_HAS_SEND_DMA      0x10   /* Supports Send DMA */
+#define HFI1_FORCED_FREEZE     0x80   /* driver forced freeze mode */
+#define HFI1_DO_INIT_ASIC      0x100  /* This device will init the ASIC */
+
+/* IB dword length mask in PBC (lower 11 bits); same for all chips */
+#define HFI1_PBC_LENGTH_MASK                     ((1 << 11) - 1)
+
+
+/* ctxt_flag bit offsets */
+		/* context has been setup */
+#define HFI1_CTXT_SETUP_DONE 1
+		/* waiting for a packet to arrive */
+#define HFI1_CTXT_WAITING_RCV   2
+		/* master has not finished initializing */
+#define HFI1_CTXT_MASTER_UNINIT 4
+		/* waiting for an urgent packet to arrive */
+#define HFI1_CTXT_WAITING_URG 5
+
+/* free up any allocated data at closes */
+struct hfi1_devdata *hfi1_init_dd(struct pci_dev *,
+				  const struct pci_device_id *);
+void hfi1_free_devdata(struct hfi1_devdata *);
+void cc_state_reclaim(struct rcu_head *rcu);
+struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra);
+
+/*
+ * Set LED override, only the two LSBs have "public" meaning, but
+ * any non-zero value substitutes them for the Link and LinkTrain
+ * LED states.
+ */
+#define HFI1_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
+#define HFI1_LED_LOG 2  /* Logical (link) YELLOW LED */
+void hfi1_set_led_override(struct hfi1_pportdata *ppd, unsigned int val);
+
+#define HFI1_CREDIT_RETURN_RATE (100)
+
+/*
+ * The number of words for the KDETH protocol field.  If this is
+ * larger then the actual field used, then part of the payload
+ * will be in the header.
+ *
+ * Optimally, we want this sized so that a typical case will
+ * use full cache lines.  The typical local KDETH header would
+ * be:
+ *
+ *	Bytes	Field
+ *	  8	LRH
+ *	 12	BHT
+ *	 ??	KDETH
+ *	  8	RHF
+ *	---
+ *	 28 + KDETH
+ *
+ * For a 64-byte cache line, KDETH would need to be 36 bytes or 9 DWORDS
+ */
+#define DEFAULT_RCVHDRSIZE 9
+
+/*
+ * Maximal header byte count:
+ *
+ *	Bytes	Field
+ *	  8	LRH
+ *	 40	GRH (optional)
+ *	 12	BTH
+ *	 ??	KDETH
+ *	  8	RHF
+ *	---
+ *	 68 + KDETH
+ *
+ * We also want to maintain a cache line alignment to assist DMA'ing
+ * of the header bytes.  Round up to a good size.
+ */
+#define DEFAULT_RCVHDR_ENTSIZE 32
+
+int hfi1_get_user_pages(unsigned long, size_t, struct page **);
+void hfi1_release_user_pages(struct page **, size_t);
+
+static inline void clear_rcvhdrtail(const struct hfi1_ctxtdata *rcd)
+{
+	*((u64 *) rcd->rcvhdrtail_kvaddr) = 0ULL;
+}
+
+static inline u32 get_rcvhdrtail(const struct hfi1_ctxtdata *rcd)
+{
+	/*
+	 * volatile because it's a DMA target from the chip, routine is
+	 * inlined, and don't want register caching or reordering.
+	 */
+	return (u32) le64_to_cpu(*rcd->rcvhdrtail_kvaddr);
+}
+
+/*
+ * sysfs interface.
+ */
+
+extern const char ib_hfi1_version[];
+
+int hfi1_device_create(struct hfi1_devdata *);
+void hfi1_device_remove(struct hfi1_devdata *);
+
+int hfi1_create_port_files(struct ib_device *ibdev, u8 port_num,
+			   struct kobject *kobj);
+int hfi1_verbs_register_sysfs(struct hfi1_devdata *);
+void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *);
+/* Hook for sysfs read of QSFP */
+int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len);
+
+int hfi1_pcie_init(struct pci_dev *, const struct pci_device_id *);
+void hfi1_pcie_cleanup(struct pci_dev *);
+int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *,
+		     const struct pci_device_id *);
+void hfi1_pcie_ddcleanup(struct hfi1_devdata *);
+void hfi1_pcie_flr(struct hfi1_devdata *);
+int pcie_speeds(struct hfi1_devdata *);
+void request_msix(struct hfi1_devdata *, u32 *, struct hfi1_msix_entry *);
+void hfi1_enable_intx(struct pci_dev *);
+void hfi1_nomsix(struct hfi1_devdata *);
+void restore_pci_variables(struct hfi1_devdata *dd);
+int do_pcie_gen3_transition(struct hfi1_devdata *dd);
+int parse_platform_config(struct hfi1_devdata *dd);
+int get_platform_config_field(struct hfi1_devdata *dd,
+			enum platform_config_table_type_encoding table_type,
+			int table_index, int field_index, u32 *data, u32 len);
+
+dma_addr_t hfi1_map_page(struct pci_dev *, struct page *, unsigned long,
+			 size_t, int);
+const char *get_unit_name(int unit);
+
+/*
+ * Flush write combining store buffers (if present) and perform a write
+ * barrier.
+ */
+static inline void flush_wc(void)
+{
+	asm volatile("sfence" : : : "memory");
+}
+
+void handle_eflags(struct hfi1_packet *packet);
+int process_receive_ib(struct hfi1_packet *packet);
+int process_receive_bypass(struct hfi1_packet *packet);
+int process_receive_error(struct hfi1_packet *packet);
+int kdeth_process_expected(struct hfi1_packet *packet);
+int kdeth_process_eager(struct hfi1_packet *packet);
+int process_receive_invalid(struct hfi1_packet *packet);
+
+extern rhf_rcv_function_ptr snoop_rhf_rcv_functions[8];
+
+void update_sge(struct hfi1_sge_state *ss, u32 length);
+
+/* global module parameter variables */
+extern unsigned int hfi1_max_mtu;
+extern unsigned int hfi1_cu;
+extern unsigned int user_credit_return_threshold;
+extern uint num_rcv_contexts;
+extern unsigned n_krcvqs;
+extern u8 krcvqs[];
+extern int krcvqsset;
+extern uint kdeth_qp;
+extern uint loopback;
+extern uint quick_linkup;
+extern uint rcv_intr_timeout;
+extern uint rcv_intr_count;
+extern uint rcv_intr_dynamic;
+extern ushort link_crc_mask;
+
+extern struct mutex hfi1_mutex;
+
+/* Number of seconds before our card status check...  */
+#define STATUS_TIMEOUT 60
+
+#define DRIVER_NAME		"hfi1"
+#define HFI1_USER_MINOR_BASE     0
+#define HFI1_TRACE_MINOR         127
+#define HFI1_DIAGPKT_MINOR       128
+#define HFI1_DIAG_MINOR_BASE     129
+#define HFI1_SNOOP_CAPTURE_BASE  200
+#define HFI1_NMINORS             255
+
+#define PCI_VENDOR_ID_INTEL 0x8086
+#define PCI_DEVICE_ID_INTEL0 0x24f0
+#define PCI_DEVICE_ID_INTEL1 0x24f1
+
+#define HFI1_PKT_USER_SC_INTEGRITY					    \
+	(SEND_CTXT_CHECK_ENABLE_DISALLOW_NON_KDETH_PACKETS_SMASK	    \
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_SMASK		    \
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_GRH_SMASK)
+
+#define HFI1_PKT_KERNEL_SC_INTEGRITY					    \
+	(SEND_CTXT_CHECK_ENABLE_DISALLOW_KDETH_PACKETS_SMASK)
+
+static inline u64 hfi1_pkt_default_send_ctxt_mask(struct hfi1_devdata *dd,
+						  u16 ctxt_type)
+{
+	u64 base_sc_integrity =
+	SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_TEST_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK
+	| SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_SMASK
+	| SEND_CTXT_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK
+	| SEND_CTXT_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK
+	| SEND_CTXT_CHECK_ENABLE_CHECK_OPCODE_SMASK
+	| SEND_CTXT_CHECK_ENABLE_CHECK_SLID_SMASK
+	| SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK
+	| SEND_CTXT_CHECK_ENABLE_CHECK_VL_SMASK
+	| SEND_CTXT_CHECK_ENABLE_CHECK_ENABLE_SMASK;
+
+	if (ctxt_type == SC_USER)
+		base_sc_integrity |= HFI1_PKT_USER_SC_INTEGRITY;
+	else
+		base_sc_integrity |= HFI1_PKT_KERNEL_SC_INTEGRITY;
+
+	if (is_a0(dd))
+		/* turn off send-side job key checks - A0 erratum */
+		return base_sc_integrity &
+		       ~SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK;
+	return base_sc_integrity;
+}
+
+static inline u64 hfi1_pkt_base_sdma_integrity(struct hfi1_devdata *dd)
+{
+	u64 base_sdma_integrity =
+	SEND_DMA_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK
+	| SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK
+	| SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK
+	| SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK
+	| SEND_DMA_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK
+	| SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK
+	| SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK
+	| SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK
+	| SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_SMASK
+	| SEND_DMA_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK
+	| SEND_DMA_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK
+	| SEND_DMA_CHECK_ENABLE_CHECK_OPCODE_SMASK
+	| SEND_DMA_CHECK_ENABLE_CHECK_SLID_SMASK
+	| SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK
+	| SEND_DMA_CHECK_ENABLE_CHECK_VL_SMASK
+	| SEND_DMA_CHECK_ENABLE_CHECK_ENABLE_SMASK;
+
+	if (is_a0(dd))
+		/* turn off send-side job key checks - A0 erratum */
+		return base_sdma_integrity &
+		       ~SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK;
+	return base_sdma_integrity;
+}
+
+/*
+ * hfi1_early_err is used (only!) to print early errors before devdata is
+ * allocated, or when dd->pcidev may not be valid, and at the tail end of
+ * cleanup when devdata may have been freed, etc.  hfi1_dev_porterr is
+ * the same as dd_dev_err, but is used when the message really needs
+ * the IB port# to be definitive as to what's happening..
+ */
+#define hfi1_early_err(dev, fmt, ...) \
+	dev_err(dev, fmt, ##__VA_ARGS__)
+
+#define hfi1_early_info(dev, fmt, ...) \
+	dev_info(dev, fmt, ##__VA_ARGS__)
+
+#define dd_dev_emerg(dd, fmt, ...) \
+	dev_emerg(&(dd)->pcidev->dev, "%s: " fmt, \
+		  get_unit_name((dd)->unit), ##__VA_ARGS__)
+#define dd_dev_err(dd, fmt, ...) \
+	dev_err(&(dd)->pcidev->dev, "%s: " fmt, \
+			get_unit_name((dd)->unit), ##__VA_ARGS__)
+#define dd_dev_warn(dd, fmt, ...) \
+	dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \
+			get_unit_name((dd)->unit), ##__VA_ARGS__)
+
+#define dd_dev_warn_ratelimited(dd, fmt, ...) \
+	dev_warn_ratelimited(&(dd)->pcidev->dev, "%s: " fmt, \
+			get_unit_name((dd)->unit), ##__VA_ARGS__)
+
+#define dd_dev_info(dd, fmt, ...) \
+	dev_info(&(dd)->pcidev->dev, "%s: " fmt, \
+			get_unit_name((dd)->unit), ##__VA_ARGS__)
+
+#define hfi1_dev_porterr(dd, port, fmt, ...) \
+	dev_err(&(dd)->pcidev->dev, "%s: IB%u:%u " fmt, \
+			get_unit_name((dd)->unit), (dd)->unit, (port), \
+			##__VA_ARGS__)
+
+/*
+ * this is used for formatting hw error messages...
+ */
+struct hfi1_hwerror_msgs {
+	u64 mask;
+	const char *msg;
+	size_t sz;
+};
+
+/* in intr.c... */
+void hfi1_format_hwerrors(u64 hwerrs,
+			  const struct hfi1_hwerror_msgs *hwerrmsgs,
+			  size_t nhwerrmsgs, char *msg, size_t lmsg);
+
+#define USER_OPCODE_CHECK_VAL 0xC0
+#define USER_OPCODE_CHECK_MASK 0xC0
+#define OPCODE_CHECK_VAL_DISABLED 0x0
+#define OPCODE_CHECK_MASK_DISABLED 0x0
+
+static inline void hfi1_reset_cpu_counters(struct hfi1_devdata *dd)
+{
+	struct hfi1_pportdata *ppd;
+	int i;
+
+	dd->z_int_counter = get_all_cpu_total(dd->int_counter);
+	dd->z_rcv_limit = get_all_cpu_total(dd->rcv_limit);
+
+	ppd = (struct hfi1_pportdata *)(dd + 1);
+	for (i = 0; i < dd->num_pports; i++, ppd++) {
+		ppd->ibport_data.z_rc_acks =
+			get_all_cpu_total(ppd->ibport_data.rc_acks);
+		ppd->ibport_data.z_rc_qacks =
+			get_all_cpu_total(ppd->ibport_data.rc_qacks);
+	}
+}
+
+/* Control LED state */
+static inline void setextled(struct hfi1_devdata *dd, u32 on)
+{
+	if (on)
+		write_csr(dd, DCC_CFG_LED_CNTRL, 0x1F);
+	else
+		write_csr(dd, DCC_CFG_LED_CNTRL, 0x10);
+}
+
+int hfi1_tempsense_rd(struct hfi1_devdata *dd, struct hfi1_temp *temp);
+
+#endif                          /* _HFI1_KERNEL_H */
