From patchwork Thu Jul 30 19:20:15 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Marciniszyn, Mike" X-Patchwork-Id: 6906401 Return-Path: X-Original-To: patchwork-linux-rdma@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id EA4E2C05AC for ; Thu, 30 Jul 2015 19:20:29 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 3CB9120458 for ; Thu, 30 Jul 2015 19:20:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 20C06202EB for ; Thu, 30 Jul 2015 19:20:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753965AbbG3TUU (ORCPT ); Thu, 30 Jul 2015 15:20:20 -0400 Received: from mga11.intel.com ([192.55.52.93]:28907 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753927AbbG3TUS (ORCPT ); Thu, 30 Jul 2015 15:20:18 -0400 Received: from orsmga001.jf.intel.com ([10.7.209.18]) by fmsmga102.fm.intel.com with ESMTP; 30 Jul 2015 12:20:17 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.15,578,1432623600"; d="scan'208";a="739051714" Received: from sedona.ch.intel.com ([143.182.228.65]) by orsmga001.jf.intel.com with ESMTP; 30 Jul 2015 12:20:17 -0700 Received: from phlsvsles11.ph.intel.com (phlsvsles11.ph.intel.com [10.228.195.43]) by sedona.ch.intel.com (8.13.6/8.14.3/Standard MailSET/Hub) with ESMTP id t6UJKFg3009349; Thu, 30 Jul 2015 12:20:16 -0700 Received: from phlsvslse11.ph.intel.com (localhost [127.0.0.1]) by phlsvsles11.ph.intel.com with ESMTP id t6UJKFvs026239; Thu, 30 Jul 2015 15:20:15 -0400 Subject: [PATCH v4 30/50] IB/hfi1: add pcie routines To: dledford@redhat.com From: Mike Marciniszyn Cc: linux-rdma@vger.kernel.org Date: Thu, 30 Jul 2015 15:20:15 -0400 Message-ID: <20150730192015.25256.70492.stgit@phlsvslse11.ph.intel.com> In-Reply-To: <20150730191631.25256.95511.stgit@phlsvslse11.ph.intel.com> References: <20150730191631.25256.95511.stgit@phlsvslse11.ph.intel.com> User-Agent: StGit/0.16 MIME-Version: 1.0 Sender: linux-rdma-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-rdma@vger.kernel.org X-Spam-Status: No, score=-8.3 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Signed-off-by: Andrew Friedley Signed-off-by: Arthur Kepner Signed-off-by: Brendan Cunningham Signed-off-by: Brian Welty Signed-off-by: Caz Yokoyama Signed-off-by: Dean Luick Signed-off-by: Dennis Dalessandro Signed-off-by: Easwar Hariharan Signed-off-by: Harish Chegondi Signed-off-by: Ira Weiny Signed-off-by: Jim Snow Signed-off-by: John Gregor Signed-off-by: Jubin John Signed-off-by: Kaike Wan Signed-off-by: Kevin Pine Signed-off-by: Kyle Liddell Signed-off-by: Mike Marciniszyn Signed-off-by: Mitko Haralanov Signed-off-by: Ravi Krishnaswamy Signed-off-by: Sadanand Warrier Signed-off-by: Sanath Kumar Signed-off-by: Sudeep Dutt Signed-off-by: Vlad Danushevsky --- drivers/infiniband/hw/hfi1/pcie.c | 1253 +++++++++++++++++++++++++++++++++++++ 1 file changed, 1253 insertions(+) create mode 100644 drivers/infiniband/hw/hfi1/pcie.c -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c new file mode 100644 index 0000000..ac5653c --- /dev/null +++ b/drivers/infiniband/hw/hfi1/pcie.c @@ -0,0 +1,1253 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include +#include +#include +#include +#include +#include + +#include "hfi.h" +#include "chip_registers.h" + +/* link speed vector for Gen3 speed - not in Linux headers */ +#define GEN1_SPEED_VECTOR 0x1 +#define GEN2_SPEED_VECTOR 0x2 +#define GEN3_SPEED_VECTOR 0x3 + +/* + * This file contains PCIe utility routines. + */ + +/* + * Code to adjust PCIe capabilities. + */ +static void tune_pcie_caps(struct hfi1_devdata *); + +/* + * Do all the common PCIe setup and initialization. + * devdata is not yet allocated, and is not allocated until after this + * routine returns success. Therefore dd_dev_err() can't be used for error + * printing. + */ +int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret; + + ret = pci_enable_device(pdev); + if (ret) { + /* + * This can happen (in theory) iff: + * We did a chip reset, and then failed to reprogram the + * BAR, or the chip reset due to an internal error. We then + * unloaded the driver and reloaded it. + * + * Both reset cases set the BAR back to initial state. For + * the latter case, the AER sticky error bit at offset 0x718 + * should be set, but the Linux kernel doesn't yet know + * about that, it appears. If the original BAR was retained + * in the kernel data structures, this may be OK. + */ + hfi1_early_err(&pdev->dev, "pci enable failed: error %d\n", + -ret); + goto done; + } + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret) { + hfi1_early_err(&pdev->dev, + "pci_request_regions fails: err %d\n", -ret); + goto bail; + } + + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (ret) { + /* + * If the 64 bit setup fails, try 32 bit. Some systems + * do not setup 64 bit maps on systems with 2GB or less + * memory installed. + */ + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) { + hfi1_early_err(&pdev->dev, + "Unable to set DMA mask: %d\n", ret); + goto bail; + } + ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + } else + ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (ret) { + hfi1_early_err(&pdev->dev, + "Unable to set DMA consistent mask: %d\n", ret); + goto bail; + } + + pci_set_master(pdev); + ret = pci_enable_pcie_error_reporting(pdev); + if (ret) { + hfi1_early_err(&pdev->dev, + "Unable to enable pcie error reporting: %d\n", + ret); + ret = 0; + } + goto done; + +bail: + hfi1_pcie_cleanup(pdev); +done: + return ret; +} + +/* + * Clean what was done in hfi1_pcie_init() + */ +void hfi1_pcie_cleanup(struct pci_dev *pdev) +{ + pci_disable_device(pdev); + /* + * Release regions should be called after the disable. OK to + * call if request regions has not been called or failed. + */ + pci_release_regions(pdev); +} + +/* + * Do remaining PCIe setup, once dd is allocated, and save away + * fields required to re-initialize after a chip reset, or for + * various other purposes + */ +int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + unsigned long len; + resource_size_t addr; + + dd->pcidev = pdev; + pci_set_drvdata(pdev, dd); + + addr = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + + /* + * The TXE PIO buffers are at the tail end of the chip space. + * Cut them off and map them separately. + */ + + /* sanity check vs expectations */ + if (len != TXE_PIO_SEND + TXE_PIO_SIZE) { + dd_dev_err(dd, "chip PIO range does not match\n"); + return -EINVAL; + } + + dd->kregbase = ioremap_nocache(addr, TXE_PIO_SEND); + if (!dd->kregbase) + return -ENOMEM; + + dd->piobase = ioremap_wc(addr + TXE_PIO_SEND, TXE_PIO_SIZE); + if (!dd->piobase) { + iounmap(dd->kregbase); + return -ENOMEM; + } + + dd->flags |= HFI1_PRESENT; /* now register routines work */ + + dd->kregend = dd->kregbase + TXE_PIO_SEND; + dd->physaddr = addr; /* used for io_remap, etc. */ + + /* + * Re-map the chip's RcvArray as write-combining to allow us + * to write an entire cacheline worth of entries in one shot. + * If this re-map fails, just continue - the RcvArray programming + * function will handle both cases. + */ + dd->chip_rcv_array_count = read_csr(dd, RCV_ARRAY_CNT); + dd->rcvarray_wc = ioremap_wc(addr + RCV_ARRAY, + dd->chip_rcv_array_count * 8); + dd_dev_info(dd, "WC Remapped RcvArray: %p\n", dd->rcvarray_wc); + /* + * Save BARs and command to rewrite after device reset. + */ + dd->pcibar0 = addr; + dd->pcibar1 = addr >> 32; + pci_read_config_dword(dd->pcidev, PCI_ROM_ADDRESS, &dd->pci_rom); + pci_read_config_word(dd->pcidev, PCI_COMMAND, &dd->pci_command); + pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL, &dd->pcie_devctl); + pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL, &dd->pcie_lnkctl); + pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL2, + &dd->pcie_devctl2); + pci_read_config_dword(dd->pcidev, PCI_CFG_MSIX0, &dd->pci_msix0); + pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE1, + &dd->pci_lnkctl3); + pci_read_config_dword(dd->pcidev, PCIE_CFG_TPH2, &dd->pci_tph2); + + return 0; +} + +/* + * Do PCIe cleanup related to dd, after chip-specific cleanup, etc. Just prior + * to releasing the dd memory. + * Void because all of the core pcie cleanup functions are void. + */ +void hfi1_pcie_ddcleanup(struct hfi1_devdata *dd) +{ + u64 __iomem *base = (void __iomem *) dd->kregbase; + + dd->flags &= ~HFI1_PRESENT; + dd->kregbase = NULL; + iounmap(base); + if (dd->rcvarray_wc) + iounmap(dd->rcvarray_wc); + if (dd->piobase) + iounmap(dd->piobase); + + pci_set_drvdata(dd->pcidev, NULL); +} + +/* + * Do a Function Level Reset (FLR) on the device. + * Based on static function drivers/pci/pci.c:pcie_flr(). + */ +void hfi1_pcie_flr(struct hfi1_devdata *dd) +{ + int i; + u16 status; + + /* no need to check for the capability - we know the device has it */ + + /* wait for Transaction Pending bit to clear, at most a few ms */ + for (i = 0; i < 4; i++) { + if (i) + msleep((1 << (i - 1)) * 100); + + pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVSTA, &status); + if (!(status & PCI_EXP_DEVSTA_TRPND)) + goto clear; + } + + dd_dev_err(dd, "Transaction Pending bit is not clearing, proceeding with reset anyway\n"); + +clear: + pcie_capability_set_word(dd->pcidev, PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_BCR_FLR); + /* PCIe spec requires the function to be back within 100ms */ + msleep(100); +} + +static void msix_setup(struct hfi1_devdata *dd, int pos, u32 *msixcnt, + struct hfi1_msix_entry *hfi1_msix_entry) +{ + int ret; + int nvec = *msixcnt; + struct msix_entry *msix_entry; + int i; + + /* We can't pass hfi1_msix_entry array to msix_setup + * so use a dummy msix_entry array and copy the allocated + * irq back to the hfi1_msix_entry array. */ + msix_entry = kmalloc_array(nvec, sizeof(*msix_entry), GFP_KERNEL); + if (!msix_entry) { + ret = -ENOMEM; + goto do_intx; + } + + for (i = 0; i < nvec; i++) + msix_entry[i] = hfi1_msix_entry[i].msix; + + ret = pci_enable_msix_range(dd->pcidev, msix_entry, 1, nvec); + if (ret < 0) + goto free_msix_entry; + nvec = ret; + + for (i = 0; i < nvec; i++) + hfi1_msix_entry[i].msix = msix_entry[i]; + + kfree(msix_entry); + *msixcnt = nvec; + return; + +free_msix_entry: + kfree(msix_entry); + +do_intx: + dd_dev_err(dd, "pci_enable_msix_range %d vectors failed: %d, falling back to INTx\n", + nvec, ret); + *msixcnt = 0; + hfi1_enable_intx(dd->pcidev); + +} + +/* return the PCIe link speed from the given link status */ +static u32 extract_speed(u16 linkstat) +{ + u32 speed; + + switch (linkstat & PCI_EXP_LNKSTA_CLS) { + default: /* not defined, assume Gen1 */ + case PCI_EXP_LNKSTA_CLS_2_5GB: + speed = 2500; /* Gen 1, 2.5GHz */ + break; + case PCI_EXP_LNKSTA_CLS_5_0GB: + speed = 5000; /* Gen 2, 5GHz */ + break; + case GEN3_SPEED_VECTOR: + speed = 8000; /* Gen 3, 8GHz */ + break; + } + return speed; +} + +/* return the PCIe link speed from the given link status */ +static u32 extract_width(u16 linkstat) +{ + return (linkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT; +} + +/* read the link status and set dd->{lbus_width,lbus_speed,lbus_info} */ +static void update_lbus_info(struct hfi1_devdata *dd) +{ + u16 linkstat; + + pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat); + dd->lbus_width = extract_width(linkstat); + dd->lbus_speed = extract_speed(linkstat); + snprintf(dd->lbus_info, sizeof(dd->lbus_info), + "PCIe,%uMHz,x%u", dd->lbus_speed, dd->lbus_width); +} + +/* + * Read in the current PCIe link width and speed. Find if the link is + * Gen3 capable. + */ +int pcie_speeds(struct hfi1_devdata *dd) +{ + u32 linkcap; + + if (!pci_is_pcie(dd->pcidev)) { + dd_dev_err(dd, "Can't find PCI Express capability!\n"); + return -EINVAL; + } + + /* find if our max speed is Gen3 and parent supports Gen3 speeds */ + dd->link_gen3_capable = 1; + + pcie_capability_read_dword(dd->pcidev, PCI_EXP_LNKCAP, &linkcap); + if ((linkcap & PCI_EXP_LNKCAP_SLS) != GEN3_SPEED_VECTOR) { + dd_dev_info(dd, + "This HFI is not Gen3 capable, max speed 0x%x, need 0x3\n", + linkcap & PCI_EXP_LNKCAP_SLS); + dd->link_gen3_capable = 0; + } + + /* + * bus->max_bus_speed is set from the bridge's linkcap Max Link Speed + */ + if (dd->pcidev->bus->max_bus_speed != PCIE_SPEED_8_0GT) { + dd_dev_info(dd, "Parent PCIe bridge does not support Gen3\n"); + dd->link_gen3_capable = 0; + } + + /* obtain the link width and current speed */ + update_lbus_info(dd); + + /* check against expected pcie width and complain if "wrong" */ + if (dd->lbus_width < 16) + dd_dev_err(dd, "PCIe width %u (x16 HFI)\n", dd->lbus_width); + + return 0; +} + +/* + * Returns in *nent: + * - actual number of interrupts allocated + * - 0 if fell back to INTx. + */ +void request_msix(struct hfi1_devdata *dd, u32 *nent, + struct hfi1_msix_entry *entry) +{ + int pos; + + pos = dd->pcidev->msix_cap; + if (*nent && pos) { + msix_setup(dd, pos, nent, entry); + /* did it, either MSI-X or INTx */ + } else { + *nent = 0; + hfi1_enable_intx(dd->pcidev); + } + + tune_pcie_caps(dd); +} + +/* + * Disable MSI-X. + */ +void hfi1_nomsix(struct hfi1_devdata *dd) +{ + pci_disable_msix(dd->pcidev); +} + +void hfi1_enable_intx(struct pci_dev *pdev) +{ + /* first, turn on INTx */ + pci_intx(pdev, 1); + /* then turn off MSI-X */ + pci_disable_msix(pdev); +} + +/* restore command and BARs after a reset has wiped them out */ +void restore_pci_variables(struct hfi1_devdata *dd) +{ + pci_write_config_word(dd->pcidev, PCI_COMMAND, dd->pci_command); + pci_write_config_dword(dd->pcidev, + PCI_BASE_ADDRESS_0, dd->pcibar0); + pci_write_config_dword(dd->pcidev, + PCI_BASE_ADDRESS_1, dd->pcibar1); + pci_write_config_dword(dd->pcidev, + PCI_ROM_ADDRESS, dd->pci_rom); + pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL, dd->pcie_devctl); + pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL, dd->pcie_lnkctl); + pcie_capability_write_word(dd->pcidev, PCI_EXP_DEVCTL2, + dd->pcie_devctl2); + pci_write_config_dword(dd->pcidev, PCI_CFG_MSIX0, dd->pci_msix0); + pci_write_config_dword(dd->pcidev, PCIE_CFG_SPCIE1, + dd->pci_lnkctl3); + pci_write_config_dword(dd->pcidev, PCIE_CFG_TPH2, dd->pci_tph2); +} + + +/* + * BIOS may not set PCIe bus-utilization parameters for best performance. + * Check and optionally adjust them to maximize our throughput. + */ +static int hfi1_pcie_caps; +module_param_named(pcie_caps, hfi1_pcie_caps, int, S_IRUGO); +MODULE_PARM_DESC(pcie_caps, "Max PCIe tuning: Payload (0..3), ReadReq (4..7)"); + +static void tune_pcie_caps(struct hfi1_devdata *dd) +{ + struct pci_dev *parent; + u16 rc_mpss, rc_mps, ep_mpss, ep_mps; + u16 rc_mrrs, ep_mrrs, max_mrrs; + + /* Find out supported and configured values for parent (root) */ + parent = dd->pcidev->bus->self; + if (!pci_is_root_bus(parent->bus)) { + dd_dev_info(dd, "Parent not root\n"); + return; + } + + if (!pci_is_pcie(parent) || !pci_is_pcie(dd->pcidev)) + return; + rc_mpss = parent->pcie_mpss; + rc_mps = ffs(pcie_get_mps(parent)) - 8; + /* Find out supported and configured values for endpoint (us) */ + ep_mpss = dd->pcidev->pcie_mpss; + ep_mps = ffs(pcie_get_mps(dd->pcidev)) - 8; + + /* Find max payload supported by root, endpoint */ + if (rc_mpss > ep_mpss) + rc_mpss = ep_mpss; + + /* If Supported greater than limit in module param, limit it */ + if (rc_mpss > (hfi1_pcie_caps & 7)) + rc_mpss = hfi1_pcie_caps & 7; + /* If less than (allowed, supported), bump root payload */ + if (rc_mpss > rc_mps) { + rc_mps = rc_mpss; + pcie_set_mps(parent, 128 << rc_mps); + } + /* If less than (allowed, supported), bump endpoint payload */ + if (rc_mpss > ep_mps) { + ep_mps = rc_mpss; + pcie_set_mps(dd->pcidev, 128 << ep_mps); + } + + /* + * Now the Read Request size. + * No field for max supported, but PCIe spec limits it to 4096, + * which is code '5' (log2(4096) - 7) + */ + max_mrrs = 5; + if (max_mrrs > ((hfi1_pcie_caps >> 4) & 7)) + max_mrrs = (hfi1_pcie_caps >> 4) & 7; + + max_mrrs = 128 << max_mrrs; + rc_mrrs = pcie_get_readrq(parent); + ep_mrrs = pcie_get_readrq(dd->pcidev); + + if (max_mrrs > rc_mrrs) { + rc_mrrs = max_mrrs; + pcie_set_readrq(parent, rc_mrrs); + } + if (max_mrrs > ep_mrrs) { + ep_mrrs = max_mrrs; + pcie_set_readrq(dd->pcidev, ep_mrrs); + } +} +/* End of PCIe capability tuning */ + +/* + * From here through hfi1_pci_err_handler definition is invoked via + * PCI error infrastructure, registered via pci + */ +static pci_ers_result_t +pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + pci_ers_result_t ret = PCI_ERS_RESULT_RECOVERED; + + switch (state) { + case pci_channel_io_normal: + dd_dev_info(dd, "State Normal, ignoring\n"); + break; + + case pci_channel_io_frozen: + dd_dev_info(dd, "State Frozen, requesting reset\n"); + pci_disable_device(pdev); + ret = PCI_ERS_RESULT_NEED_RESET; + break; + + case pci_channel_io_perm_failure: + if (dd) { + dd_dev_info(dd, "State Permanent Failure, disabling\n"); + /* no more register accesses! */ + dd->flags &= ~HFI1_PRESENT; + hfi1_disable_after_error(dd); + } + /* else early, or other problem */ + ret = PCI_ERS_RESULT_DISCONNECT; + break; + + default: /* shouldn't happen */ + dd_dev_info(dd, "HFI1 PCI errors detected (state %d)\n", + state); + break; + } + return ret; +} + +static pci_ers_result_t +pci_mmio_enabled(struct pci_dev *pdev) +{ + u64 words = 0U; + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + pci_ers_result_t ret = PCI_ERS_RESULT_RECOVERED; + + if (dd && dd->pport) { + words = read_port_cntr(dd->pport, C_RX_WORDS, CNTR_INVALID_VL); + if (words == ~0ULL) + ret = PCI_ERS_RESULT_NEED_RESET; + dd_dev_info(dd, + "HFI1 mmio_enabled function called, read wordscntr %Lx, returning %d\n", + words, ret); + } + return ret; +} + +static pci_ers_result_t +pci_slot_reset(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + dd_dev_info(dd, "HFI1 slot_reset function called, ignored\n"); + return PCI_ERS_RESULT_CAN_RECOVER; +} + +static pci_ers_result_t +pci_link_reset(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + dd_dev_info(dd, "HFI1 link_reset function called, ignored\n"); + return PCI_ERS_RESULT_CAN_RECOVER; +} + +static void +pci_resume(struct pci_dev *pdev) +{ + struct hfi1_devdata *dd = pci_get_drvdata(pdev); + + dd_dev_info(dd, "HFI1 resume function called\n"); + pci_cleanup_aer_uncorrect_error_status(pdev); + /* + * Running jobs will fail, since it's asynchronous + * unlike sysfs-requested reset. Better than + * doing nothing. + */ + hfi1_init(dd, 1); /* same as re-init after reset */ +} + +const struct pci_error_handlers hfi1_pci_err_handler = { + .error_detected = pci_error_detected, + .mmio_enabled = pci_mmio_enabled, + .link_reset = pci_link_reset, + .slot_reset = pci_slot_reset, + .resume = pci_resume, +}; + +/*============================================================================*/ +/* PCIe Gen3 support */ + +/* + * This code is separated out because it is expected to be removed in the + * final shipping product. If not, then it will be revisited and items + * will be moved to more standard locations. + */ + +/* ASIC_PCI_SD_HOST_STATUS.FW_DNLD_STS field values */ +#define DL_STATUS_HFI0 0x1 /* hfi0 firmware download complete */ +#define DL_STATUS_HFI1 0x2 /* hfi1 firmware download complete */ +#define DL_STATUS_BOTH 0x3 /* hfi0 and hfi1 firmware download complete */ + +/* ASIC_PCI_SD_HOST_STATUS.FW_DNLD_ERR field values */ +#define DL_ERR_NONE 0x0 /* no error */ +#define DL_ERR_SWAP_PARITY 0x1 /* parity error in SerDes interrupt */ + /* or response data */ +#define DL_ERR_DISABLED 0x2 /* hfi disabled */ +#define DL_ERR_SECURITY 0x3 /* security check failed */ +#define DL_ERR_SBUS 0x4 /* SBus status error */ +#define DL_ERR_XFR_PARITY 0x5 /* parity error during ROM transfer*/ + +/* gasket block secondary bus reset delay */ +#define SBR_DELAY_US 200000 /* 200ms */ + +/* mask for PCIe capability register lnkctl2 target link speed */ +#define LNKCTL2_TARGET_LINK_SPEED_MASK 0xf + +static uint pcie_target = 3; +module_param(pcie_target, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_target, "PCIe target speed (0 skip, 1-3 Gen1-3)"); + +static uint pcie_force; +module_param(pcie_force, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_force, "Force driver to do a PCIe firmware download even if already at target speed"); + +static uint pcie_retry = 5; +module_param(pcie_retry, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_retry, "Driver will try this many times to reach requested speed"); + +#define UNSET_PSET 255 +#define DEFAULT_DISCRETE_PSET 2 /* discrete HFI */ +#define DEFAULT_MCP_PSET 4 /* MCP HFI */ +static uint pcie_pset = UNSET_PSET; +module_param(pcie_pset, uint, S_IRUGO); +MODULE_PARM_DESC(pcie_pset, "PCIe Eq Pset value to use, range is 0-10"); + +/* equalization columns */ +#define PREC 0 +#define ATTN 1 +#define POST 2 + +/* discrete silicon preliminary equalization values */ +static const u8 discrete_preliminary_eq[11][3] = { + /* prec attn post */ + { 0x00, 0x00, 0x12 }, /* p0 */ + { 0x00, 0x00, 0x0c }, /* p1 */ + { 0x00, 0x00, 0x0f }, /* p2 */ + { 0x00, 0x00, 0x09 }, /* p3 */ + { 0x00, 0x00, 0x00 }, /* p4 */ + { 0x06, 0x00, 0x00 }, /* p5 */ + { 0x09, 0x00, 0x00 }, /* p6 */ + { 0x06, 0x00, 0x0f }, /* p7 */ + { 0x09, 0x00, 0x09 }, /* p8 */ + { 0x0c, 0x00, 0x00 }, /* p9 */ + { 0x00, 0x00, 0x18 }, /* p10 */ +}; + +/* integrated silicon preliminary equalization values */ +static const u8 integrated_preliminary_eq[11][3] = { + /* prec attn post */ + { 0x00, 0x1e, 0x07 }, /* p0 */ + { 0x00, 0x1e, 0x05 }, /* p1 */ + { 0x00, 0x1e, 0x06 }, /* p2 */ + { 0x00, 0x1e, 0x04 }, /* p3 */ + { 0x00, 0x1e, 0x00 }, /* p4 */ + { 0x03, 0x1e, 0x00 }, /* p5 */ + { 0x04, 0x1e, 0x00 }, /* p6 */ + { 0x03, 0x1e, 0x06 }, /* p7 */ + { 0x03, 0x1e, 0x04 }, /* p8 */ + { 0x05, 0x1e, 0x00 }, /* p9 */ + { 0x00, 0x1e, 0x0a }, /* p10 */ +}; + +/* helper to format the value to write to hardware */ +#define eq_value(pre, curr, post) \ + ((((u32)(pre)) << \ + PCIE_CFG_REG_PL102_GEN3_EQ_PRE_CURSOR_PSET_SHIFT) \ + | (((u32)(curr)) << PCIE_CFG_REG_PL102_GEN3_EQ_CURSOR_PSET_SHIFT) \ + | (((u32)(post)) << \ + PCIE_CFG_REG_PL102_GEN3_EQ_POST_CURSOR_PSET_SHIFT)) + +/* + * Load the given EQ preset table into the PCIe hardware. + */ +static int load_eq_table(struct hfi1_devdata *dd, const u8 eq[11][3], u8 fs, + u8 div) +{ + struct pci_dev *pdev = dd->pcidev; + u32 hit_error = 0; + u32 violation; + u32 i; + u8 c_minus1, c0, c_plus1; + + for (i = 0; i < 11; i++) { + /* set index */ + pci_write_config_dword(pdev, PCIE_CFG_REG_PL103, i); + /* write the value */ + c_minus1 = eq[i][PREC] / div; + c0 = fs - (eq[i][PREC] / div) - (eq[i][POST] / div); + c_plus1 = eq[i][POST] / div; + pci_write_config_dword(pdev, PCIE_CFG_REG_PL102, + eq_value(c_minus1, c0, c_plus1)); + /* check if these coefficients violate EQ rules */ + pci_read_config_dword(dd->pcidev, PCIE_CFG_REG_PL105, + &violation); + if (violation + & PCIE_CFG_REG_PL105_GEN3_EQ_VIOLATE_COEF_RULES_SMASK){ + if (hit_error == 0) { + dd_dev_err(dd, + "Gen3 EQ Table Coefficient rule violations\n"); + dd_dev_err(dd, " prec attn post\n"); + } + dd_dev_err(dd, " p%02d: %02x %02x %02x\n", + i, (u32)eq[i][0], (u32)eq[i][1], (u32)eq[i][2]); + dd_dev_err(dd, " %02x %02x %02x\n", + (u32)c_minus1, (u32)c0, (u32)c_plus1); + hit_error = 1; + } + } + if (hit_error) + return -EINVAL; + return 0; +} + +/* + * Steps to be done after the PCIe firmware is downloaded and + * before the SBR for the Pcie Gen3. + * The hardware mutex is already being held. + */ +static void pcie_post_steps(struct hfi1_devdata *dd) +{ + int i; + + set_sbus_fast_mode(dd); + /* + * Write to the PCIe PCSes to set the G3_LOCKED_NEXT bits to 1. + * This avoids a spurious framing error that can otherwise be + * generated by the MAC layer. + * + * Use individual addresses since no broadcast is set up. + */ + for (i = 0; i < NUM_PCIE_SERDES; i++) { + sbus_request(dd, pcie_pcs_addrs[dd->hfi1_id][i], + 0x03, WRITE_SBUS_RECEIVER, 0x00022132); + } + + clear_sbus_fast_mode(dd); +} + +/* + * Trigger a secondary bus reset (SBR) on ourselves using our parent. + * + * Based on pci_parent_bus_reset() which is not exported by the + * kernel core. + */ +static int trigger_sbr(struct hfi1_devdata *dd) +{ + struct pci_dev *dev = dd->pcidev; + struct pci_dev *pdev; + + /* need a parent */ + if (!dev->bus->self) { + dd_dev_err(dd, "%s: no parent device\n", __func__); + return -ENOTTY; + } + + /* should not be anyone else on the bus */ + list_for_each_entry(pdev, &dev->bus->devices, bus_list) + if (pdev != dev) { + dd_dev_err(dd, + "%s: another device is on the same bus\n", + __func__); + return -ENOTTY; + } + + /* + * A secondary bus reset (SBR) issues a hot reset to our device. + * The following routine does a 1s wait after the reset is dropped + * per PCI Trhfa (recovery time). PCIe 3.0 section 6.6.1 - + * Conventional Reset, paragraph 3, line 35 also says that a 1s + * delay after a reset is required. Per spec requirements, + * the link is either working or not after that point. + */ + pci_reset_bridge_secondary_bus(dev->bus->self); + + return 0; +} + +/* + * Write the given gasket interrupt register. + */ +static void write_gasket_interrupt(struct hfi1_devdata *dd, int index, + u16 code, u16 data) +{ + write_csr(dd, ASIC_PCIE_SD_INTRPT_LIST + (index * 8), + (((u64)code << ASIC_PCIE_SD_INTRPT_LIST_INTRPT_CODE_SHIFT) + |((u64)data << ASIC_PCIE_SD_INTRPT_LIST_INTRPT_DATA_SHIFT))); +} + +/* + * Tell the gasket logic how to react to the reset. + */ +static void arm_gasket_logic(struct hfi1_devdata *dd) +{ + u64 reg; + + reg = (((u64)1 << dd->hfi1_id) + << ASIC_PCIE_SD_HOST_CMD_INTRPT_CMD_SHIFT) + | ((u64)pcie_serdes_broadcast[dd->hfi1_id] + << ASIC_PCIE_SD_HOST_CMD_SBUS_RCVR_ADDR_SHIFT + | ASIC_PCIE_SD_HOST_CMD_SBR_MODE_SMASK + | ((u64)SBR_DELAY_US & ASIC_PCIE_SD_HOST_CMD_TIMER_MASK) + << ASIC_PCIE_SD_HOST_CMD_TIMER_SHIFT + ); + write_csr(dd, ASIC_PCIE_SD_HOST_CMD, reg); + /* read back to push the write */ + read_csr(dd, ASIC_PCIE_SD_HOST_CMD); +} + +/* + * Do all the steps needed to transition the PCIe link to Gen3 speed. + */ +int do_pcie_gen3_transition(struct hfi1_devdata *dd) +{ + struct pci_dev *parent; + u64 fw_ctrl; + u64 reg, therm; + u32 reg32, fs, lf; + u32 status, err; + int ret; + int do_retry, retry_count = 0; + uint default_pset; + u16 target_vector, target_speed; + u16 lnkctl, lnkctl2, vendor; + u8 nsbr = 1; + u8 div; + const u8 (*eq)[3]; + int return_error = 0; + + /* PCIe Gen3 is for the ASIC only */ + if (dd->icode != ICODE_RTL_SILICON) + return 0; + + if (pcie_target == 1) { /* target Gen1 */ + target_vector = GEN1_SPEED_VECTOR; + target_speed = 2500; + } else if (pcie_target == 2) { /* target Gen2 */ + target_vector = GEN2_SPEED_VECTOR; + target_speed = 5000; + } else if (pcie_target == 3) { /* target Gen3 */ + target_vector = GEN3_SPEED_VECTOR; + target_speed = 8000; + } else { + /* off or invalid target - skip */ + dd_dev_info(dd, "%s: Skipping PCIe transition\n", __func__); + return 0; + } + + /* if already at target speed, done (unless forced) */ + if (dd->lbus_speed == target_speed) { + dd_dev_info(dd, "%s: PCIe already at gen%d, %s\n", __func__, + pcie_target, + pcie_force ? "re-doing anyway" : "skipping"); + if (!pcie_force) + return 0; + } + + /* + * A0 needs an additional SBR + */ + if (is_a0(dd)) + nsbr++; + + /* + * Do the Gen3 transition. Steps are those of the PCIe Gen3 + * recipe. + */ + + /* step 1: pcie link working in gen1/gen2 */ + + /* step 2: if either side is not capable of Gen3, done */ + if (pcie_target == 3 && !dd->link_gen3_capable) { + dd_dev_err(dd, "The PCIe link is not Gen3 capable\n"); + ret = -ENOSYS; + goto done_no_mutex; + } + + /* hold the HW mutex across the firmware download and SBR */ + ret = acquire_hw_mutex(dd); + if (ret) + return ret; + + /* make sure thermal polling is not causing interrupts */ + therm = read_csr(dd, ASIC_CFG_THERM_POLL_EN); + if (therm) { + write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x0); + msleep(100); + dd_dev_info(dd, "%s: Disabled therm polling\n", + __func__); + } + + /* step 3: download SBus Master firmware */ + /* step 4: download PCIe Gen3 SerDes firmware */ +retry: + dd_dev_info(dd, "%s: downloading firmware\n", __func__); + ret = load_pcie_firmware(dd); + if (ret) + goto done; + + /* step 5: set up device parameter settings */ + dd_dev_info(dd, "%s: setting PCIe registers\n", __func__); + + /* + * PcieCfgSpcie1 - Link Control 3 + * Leave at reset value. No need to set PerfEq - link equalization + * will be performed automatically after the SBR when the target + * speed is 8GT/s. + */ + + /* clear all 16 per-lane error bits (PCIe: Lane Error Status) */ + pci_write_config_dword(dd->pcidev, PCIE_CFG_SPCIE2, 0xffff); + + /* step 5a: Set Synopsys Port Logic registers */ + + /* + * PcieCfgRegPl2 - Port Force Link + * + * Set the low power field to 0x10 to avoid unnecessary power + * management messages. All other fields are zero. + */ + reg32 = 0x10ul << PCIE_CFG_REG_PL2_LOW_PWR_ENT_CNT_SHIFT; + pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL2, reg32); + + /* + * PcieCfgRegPl100 - Gen3 Control + * + * turn off PcieCfgRegPl100.Gen3ZRxDcNonCompl + * turn on PcieCfgRegPl100.EqEieosCnt (erratum) + * Everything else zero. + */ + reg32 = PCIE_CFG_REG_PL100_EQ_EIEOS_CNT_SMASK; + pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL100, reg32); + + /* + * PcieCfgRegPl101 - Gen3 EQ FS and LF + * PcieCfgRegPl102 - Gen3 EQ Presets to Coefficients Mapping + * PcieCfgRegPl103 - Gen3 EQ Preset Index + * PcieCfgRegPl105 - Gen3 EQ Status + * + * Give initial EQ settings. + */ + if (dd->pcidev->device == PCI_DEVICE_ID_INTEL0) { /* discrete */ + /* 1000mV, FS=24, LF = 8 */ + fs = 24; + lf = 8; + div = 3; + eq = discrete_preliminary_eq; + default_pset = DEFAULT_DISCRETE_PSET; + } else { + /* 400mV, FS=29, LF = 9 */ + fs = 29; + lf = 9; + div = 1; + eq = integrated_preliminary_eq; + default_pset = DEFAULT_MCP_PSET; + } + pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL101, + (fs << PCIE_CFG_REG_PL101_GEN3_EQ_LOCAL_FS_SHIFT) + | (lf << PCIE_CFG_REG_PL101_GEN3_EQ_LOCAL_LF_SHIFT)); + ret = load_eq_table(dd, eq, fs, div); + if (ret) + goto done; + + /* + * PcieCfgRegPl106 - Gen3 EQ Control + * + * Set Gen3EqPsetReqVec, leave other fields 0. + */ + if (pcie_pset == UNSET_PSET) + pcie_pset = default_pset; + if (pcie_pset > 10) { /* valid range is 0-10, inclusive */ + dd_dev_err(dd, "%s: Invalid Eq Pset %u, setting to %d\n", + __func__, pcie_pset, default_pset); + pcie_pset = default_pset; + } + dd_dev_info(dd, "%s: using EQ Pset %u\n", __func__, pcie_pset); + pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL106, + ((1 << pcie_pset) + << PCIE_CFG_REG_PL106_GEN3_EQ_PSET_REQ_VEC_SHIFT) + | PCIE_CFG_REG_PL106_GEN3_EQ_EVAL2MS_DISABLE_SMASK + | PCIE_CFG_REG_PL106_GEN3_EQ_PHASE23_EXIT_MODE_SMASK); + + /* + * step 5b: Do post firmware download steps via SBus + */ + dd_dev_info(dd, "%s: doing pcie post steps\n", __func__); + pcie_post_steps(dd); + + /* + * step 5c: Program gasket interrupts + */ + /* set the Rx Bit Rate to REFCLK ratio */ + write_gasket_interrupt(dd, 0, 0x0006, 0x0050); + /* disable pCal for PCIe Gen3 RX equalization */ + write_gasket_interrupt(dd, 1, 0x0026, 0x5b01); + /* + * Enable iCal for PCIe Gen3 RX equalization, and set which + * evaluation of RX_EQ_EVAL will launch the iCal procedure. + */ + write_gasket_interrupt(dd, 2, 0x0026, 0x5202); + /* terminate list */ + write_gasket_interrupt(dd, 3, 0x0000, 0x0000); + + /* + * step 5d: program XMT margin + * Right now, leave the default alone. To change, do a + * read-modify-write of: + * CcePcieCtrl.XmtMargin + * CcePcieCtrl.XmitMarginOverwriteEnable + */ + + /* step 5e: disable active state power management (ASPM) */ + dd_dev_info(dd, "%s: clearing ASPM\n", __func__); + pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL, &lnkctl); + lnkctl &= ~PCI_EXP_LNKCTL_ASPMC; + pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL, lnkctl); + + /* + * step 5f: clear DirectSpeedChange + * PcieCfgRegPl67.DirectSpeedChange must be zero to prevent the + * change in the speed target from starting before we are ready. + * This field defaults to 0 and we are not changing it, so nothing + * needs to be done. + */ + + /* step 5g: Set target link speed */ + /* + * Set target link speed to be target on both device and parent. + * On setting the parent: Some system BIOSs "helpfully" set the + * parent target speed to Gen2 to match the ASIC's initial speed. + * We can set the target Gen3 because we have already checked + * that it is Gen3 capable earlier. + */ + dd_dev_info(dd, "%s: setting parent target link speed\n", __func__); + parent = dd->pcidev->bus->self; + pcie_capability_read_word(parent, PCI_EXP_LNKCTL2, &lnkctl2); + dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__, + (u32)lnkctl2); + /* only write to parent if target is not as high as ours */ + if ((lnkctl2 & LNKCTL2_TARGET_LINK_SPEED_MASK) < target_vector) { + lnkctl2 &= ~LNKCTL2_TARGET_LINK_SPEED_MASK; + lnkctl2 |= target_vector; + dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__, + (u32)lnkctl2); + pcie_capability_write_word(parent, PCI_EXP_LNKCTL2, lnkctl2); + } else { + dd_dev_info(dd, "%s: ..target speed is OK\n", __func__); + } + + dd_dev_info(dd, "%s: setting target link speed\n", __func__); + pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2); + dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__, + (u32)lnkctl2); + lnkctl2 &= ~LNKCTL2_TARGET_LINK_SPEED_MASK; + lnkctl2 |= target_vector; + dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__, + (u32)lnkctl2); + pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2); + + /* step 5h: arm gasket logic */ + /* hold DC in reset across the SBR */ + write_csr(dd, CCE_DC_CTRL, CCE_DC_CTRL_DC_RESET_SMASK); + (void) read_csr(dd, CCE_DC_CTRL); /* DC reset hold */ + /* save firmware control across the SBR */ + fw_ctrl = read_csr(dd, MISC_CFG_FW_CTRL); + + dd_dev_info(dd, "%s: arming gasket logic\n", __func__); + arm_gasket_logic(dd); + + /* + * step 6: quiesce PCIe link + * The chip has already been reset, so there will be no traffic + * from the chip. Linux has no easy way to enforce that it will + * not try to access the device, so we just need to hope it doesn't + * do it while we are doing the reset. + */ + + /* + * step 7: initiate the secondary bus reset (SBR) + * step 8: hardware brings the links back up + * step 9: wait for link speed transition to be complete + */ + dd_dev_info(dd, "%s: calling trigger_sbr\n", __func__); + ret = trigger_sbr(dd); + if (ret) + goto done; + + /* step 10: decide what to do next */ + + /* check if we can read PCI space */ + ret = pci_read_config_word(dd->pcidev, PCI_VENDOR_ID, &vendor); + if (ret) { + dd_dev_info(dd, + "%s: read of VendorID failed after SBR, err %d\n", + __func__, ret); + return_error = 1; + goto done; + } + if (vendor == 0xffff) { + dd_dev_info(dd, "%s: VendorID is all 1s after SBR\n", __func__); + return_error = 1; + ret = -EIO; + goto done; + } + + /* restore PCI space registers we know were reset */ + dd_dev_info(dd, "%s: calling restore_pci_variables\n", __func__); + restore_pci_variables(dd); + /* restore firmware control */ + write_csr(dd, MISC_CFG_FW_CTRL, fw_ctrl); + + /* + * Check the gasket block status. + * + * This is the first CSR read after the SBR. If the read returns + * all 1s (fails), the link did not make it back. + * + * Once we're sure we can read and write, clear the DC reset after + * the SBR. Then check for any per-lane errors. Then look over + * the status. + */ + reg = read_csr(dd, ASIC_PCIE_SD_HOST_STATUS); + dd_dev_info(dd, "%s: gasket block status: 0x%llx\n", __func__, reg); + if (reg == ~0ull) { /* PCIe read failed/timeout */ + dd_dev_err(dd, "SBR failed - unable to read from device\n"); + return_error = 1; + ret = -ENOSYS; + goto done; + } + + /* clear the DC reset */ + write_csr(dd, CCE_DC_CTRL, 0); + /* Set the LED off */ + if (is_a0(dd)) + setextled(dd, 0); + + /* check for any per-lane errors */ + pci_read_config_dword(dd->pcidev, PCIE_CFG_SPCIE2, ®32); + dd_dev_info(dd, "%s: per-lane errors: 0x%x\n", __func__, reg32); + + /* extract status, look for our HFI */ + status = (reg >> ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_STS_SHIFT) + & ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_STS_MASK; + if ((status & (1 << dd->hfi1_id)) == 0) { + dd_dev_err(dd, + "%s: gasket status 0x%x, expecting 0x%x\n", + __func__, status, 1 << dd->hfi1_id); + ret = -EIO; + goto done; + } + + /* extract error */ + err = (reg >> ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_ERR_SHIFT) + & ASIC_PCIE_SD_HOST_STATUS_FW_DNLD_ERR_MASK; + if (err) { + dd_dev_err(dd, "%s: gasket error %d\n", __func__, err); + ret = -EIO; + goto done; + } + + /* update our link information cache */ + update_lbus_info(dd); + dd_dev_info(dd, "%s: new speed and width: %s\n", __func__, + dd->lbus_info); + + if (dd->lbus_speed != target_speed) { /* not target */ + /* maybe retry */ + do_retry = retry_count < pcie_retry; + dd_dev_err(dd, "PCIe link speed did not switch to Gen%d%s\n", + pcie_target, do_retry ? ", retrying" : ""); + retry_count++; + if (do_retry) { + msleep(100); /* allow time to settle */ + goto retry; + } + ret = -EIO; + } + +done: + if (therm) { + write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x1); + msleep(100); + dd_dev_info(dd, "%s: Re-enable therm polling\n", + __func__); + } + release_hw_mutex(dd); +done_no_mutex: + /* return no error if it is OK to be at current speed */ + if (ret && !return_error) { + dd_dev_err(dd, "Proceeding at current speed PCIe speed\n"); + ret = 0; + } + + dd_dev_info(dd, "%s: done\n", __func__); + return ret; +}