@@ -154,9 +154,9 @@ static struct net_device *mlx4_ib_get_netdev(struct ib_device *device, u8 port_n
return dev;
}
-static int mlx4_ib_update_gids(struct gid_entry *gids,
- struct mlx4_ib_dev *ibdev,
- u8 port_num)
+static int mlx4_ib_update_gids_v1(struct gid_entry *gids,
+ struct mlx4_ib_dev *ibdev,
+ u8 port_num)
{
struct mlx4_cmd_mailbox *mailbox;
int err;
@@ -187,6 +187,63 @@ static int mlx4_ib_update_gids(struct gid_entry *gids,
return err;
}
+static int mlx4_ib_update_gids_v1_v2(struct gid_entry *gids,
+ struct mlx4_ib_dev *ibdev,
+ u8 port_num)
+{
+ struct mlx4_cmd_mailbox *mailbox;
+ int err;
+ struct mlx4_dev *dev = ibdev->dev;
+ int i;
+ struct {
+ union ib_gid gid;
+ __be32 rsrvd1[2];
+ __be16 rsrvd2;
+ u8 type;
+ u8 version;
+ __be32 rsrvd3;
+ } *gid_tbl;
+
+ mailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(mailbox))
+ return -ENOMEM;
+
+ gid_tbl = mailbox->buf;
+ for (i = 0; i < MLX4_MAX_PORT_GIDS; ++i) {
+ memcpy(&gid_tbl[i].gid, &gids[i].gid, sizeof(union ib_gid));
+ if (gids[i].gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) {
+ gid_tbl[i].version = 2;
+ if (!ipv6_addr_v4mapped((struct in6_addr *)&gids[i].gid))
+ gid_tbl[i].type = 1;
+ else
+ memset(&gid_tbl[i].gid, 0, 12);
+ }
+ }
+
+ err = mlx4_cmd(dev, mailbox->dma,
+ MLX4_SET_PORT_ROCE_ADDR << 8 | port_num,
+ 1, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B,
+ MLX4_CMD_WRAPPED);
+ if (mlx4_is_bonded(dev))
+ err += mlx4_cmd(dev, mailbox->dma,
+ MLX4_SET_PORT_ROCE_ADDR << 8 | 2,
+ 1, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B,
+ MLX4_CMD_WRAPPED);
+
+ mlx4_free_cmd_mailbox(dev, mailbox);
+ return err;
+}
+
+static int mlx4_ib_update_gids(struct gid_entry *gids,
+ struct mlx4_ib_dev *ibdev,
+ u8 port_num)
+{
+ if (ibdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ROCE_V1_V2)
+ return mlx4_ib_update_gids_v1_v2(gids, ibdev, port_num);
+
+ return mlx4_ib_update_gids_v1(gids, ibdev, port_num);
+}
+
static int mlx4_ib_add_gid(struct ib_device *device,
u8 port_num,
unsigned int index,
@@ -206,7 +206,8 @@ enum {
MLX4_SET_PORT_GID_TABLE = 0x5,
MLX4_SET_PORT_PRIO2TC = 0x8,
MLX4_SET_PORT_SCHEDULER = 0x9,
- MLX4_SET_PORT_VXLAN = 0xB
+ MLX4_SET_PORT_VXLAN = 0xB,
+ MLX4_SET_PORT_ROCE_ADDR = 0xD
};
enum {
To tell hardware about a gid with type RoCEv2, software needs a new modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can replace the old method, MLX4_SET_PORT_GID_TABLE, for RoCEv1 gids. Signed-off-by: Moni Shoua <monis@mellanox.com> --- drivers/infiniband/hw/mlx4/main.c | 63 +++++++++++++++++++++++++++++++++++++-- include/linux/mlx4/cmd.h | 3 +- 2 files changed, 62 insertions(+), 4 deletions(-)