[V5,00/10] remoteproc: qcom: q6v5-wcss: Add support for secure pil

Message

Gokul Sriram Palanisamy May 13, 2020, 9:30 a.m. UTC

IPQ8074 needs support for secure pil as well.
Also, currently only unified firmware is supported.
IPQ8074 supports split firmware for q6 and m3, so
adding support for that.

This series is based on Govind's
"[v5] Add non PAS wcss Q6 support for QCS404"

changes since v4:
 - Rebased patch 8

changes since v3:
 - In patch 10, Added release_firmware to free up
   memory requested for m3 firmware.

changes since v2:
 - In patch 5, Added a driver data 'bcr_reset_required'
   to select if bcr reset is required
 - In patch 10, Removed syscon implementation and moved
   to mailbox framework to access APCS IPC

changes since v1:
 - In patch 10, Addressed minor review comments.

Gokul Sriram Palanisamy (10):
  remoteproc: qcom: Add PRNG proxy clock
  remoteproc: qcom: Add secure PIL support
  remoteproc: qcom: Add support for split q6 + m3 wlan firmware
  remoteproc: qcom: Add ssr subdevice identifier
  remoteproc: qcom: Update regmap offsets for halt register
  dt-bindings: clock: qcom: Add reset for WCSSAON
  clk: qcom: Add WCSSAON reset
  dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
  arm64: dts: Add support for scm on IPQ8074 SoCs
  arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC

 .../devicetree/bindings/firmware/qcom,scm.txt      |   1 +
 arch/arm64/boot/dts/qcom/ipq8074.dtsi              | 127 +++++++++++++++++
 drivers/clk/qcom/gcc-ipq8074.c                     |   1 +
 drivers/remoteproc/qcom_q6v5_wcss.c                | 157 +++++++++++++++++----
 include/dt-bindings/clock/qcom,gcc-ipq8074.h       |   1 +
 5 files changed, 258 insertions(+), 29 deletions(-)

Comments

Gokul Sriram Palanisamy June 30, 2020, 12:31 p.m. UTC | #1

Hi Bjorn,
  My below patch series (https://patchwork.kernel.org/cover/11545511/) 
with all the review comments addressed and this is on top of
  Govind's series (https://patchwork.kernel.org/cover/11060629/) "[v5] 
"Add non PAS wcss Q6 support for QCS404".
  Need your help to know how should I proceed further to merge these 
patches.

  Regards,
  Gokul

On 2020-05-13 15:00, Gokul Sriram Palanisamy wrote:
> IPQ8074 needs support for secure pil as well.
> Also, currently only unified firmware is supported.
> IPQ8074 supports split firmware for q6 and m3, so
> adding support for that.
> 
> This series is based on Govind's
> "[v5] Add non PAS wcss Q6 support for QCS404"
> 
> changes since v4:
>  - Rebased patch 8
> 
> changes since v3:
>  - In patch 10, Added release_firmware to free up
>    memory requested for m3 firmware.
> 
> changes since v2:
>  - In patch 5, Added a driver data 'bcr_reset_required'
>    to select if bcr reset is required
>  - In patch 10, Removed syscon implementation and moved
>    to mailbox framework to access APCS IPC
> 
> changes since v1:
>  - In patch 10, Addressed minor review comments.
> 
> Gokul Sriram Palanisamy (10):
>   remoteproc: qcom: Add PRNG proxy clock
>   remoteproc: qcom: Add secure PIL support
>   remoteproc: qcom: Add support for split q6 + m3 wlan firmware
>   remoteproc: qcom: Add ssr subdevice identifier
>   remoteproc: qcom: Update regmap offsets for halt register
>   dt-bindings: clock: qcom: Add reset for WCSSAON
>   clk: qcom: Add WCSSAON reset
>   dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
>   arm64: dts: Add support for scm on IPQ8074 SoCs
>   arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
> 
>  .../devicetree/bindings/firmware/qcom,scm.txt      |   1 +
>  arch/arm64/boot/dts/qcom/ipq8074.dtsi              | 127 
> +++++++++++++++++
>  drivers/clk/qcom/gcc-ipq8074.c                     |   1 +
>  drivers/remoteproc/qcom_q6v5_wcss.c                | 157 
> +++++++++++++++++----
>  include/dt-bindings/clock/qcom,gcc-ipq8074.h       |   1 +
>  5 files changed, 258 insertions(+), 29 deletions(-)