mbox series

[v2,00/12] dt-bindings: remoteproc: qcom: cleanups and improvements

Message ID 20220517070113.18023-1-krzysztof.kozlowski@linaro.org (mailing list archive)
Headers show
Series dt-bindings: remoteproc: qcom: cleanups and improvements | expand

Message

Krzysztof Kozlowski May 17, 2022, 7:01 a.m. UTC 
Hi,

Patches are mostly independent, so they can go via:
1. Qualcomm SoC (dt-bindings/soc: + arm64)
2. remoteproc (dt-bindings).

Changes since v1
================
1. Add review tags
2. Patch 8: Remove ref from label (Rob)

Best regards,
Krzysztof

Krzysztof Kozlowski (12):
  dt-bindings: soc: qcom,wcnss: remove unneeded ref for names
  dt-bindings: remoteproc: remove unneeded ref for names
  dt-bindings: remoteproc: qcom,adsp: add interconnects
  dt-bindings: remoteproc: qcom,adsp: simplify interrupts
  dt-bindings: remoteproc: qcom,adsp: simplify SM8150 power domains
  dt-bindings: remoteproc: qcom,adsp: use GIC_SPI defines in example
  dt-bindings: remoteproc: qcom,glink-edge: define re-usable schema for
    glink-edge
  dt-bindings: remoteproc: qcom,smd-edge: define re-usable schema for
    smd-edge
  arm64: dts: qcom: ipq6018: add label to remoteproc node
  arm64: dts: qcom: sdm630: remove unneeded address/size cells in
    glink-edge
  arm64: dts: qcom: sm8350: remove duplicated glink-edge interrupt
  arm64: dts: qcom: sm8450: remove duplicated glink-edge interrupt

 .../bindings/remoteproc/qcom,adsp.yaml        | 74 ++++++----------
 .../bindings/remoteproc/qcom,glink-edge.yaml  | 72 ++++++++++++++++
 .../remoteproc/qcom,qcs404-cdsp-pil.yaml      |  1 -
 .../remoteproc/qcom,sc7280-wpss-pil.yaml      | 21 ++---
 .../remoteproc/qcom,sdm845-adsp-pil.yaml      |  1 -
 .../bindings/remoteproc/qcom,smd-edge.yaml    | 85 +++++++++++++++++++
 .../bindings/soc/qcom/qcom,smd.yaml           | 53 +-----------
 .../bindings/soc/qcom/qcom,wcnss.yaml         |  1 -
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  1 +
 arch/arm64/boot/dts/qcom/sdm630.dtsi          |  2 -
 arch/arm64/boot/dts/qcom/sm8350.dtsi          |  1 -
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |  1 -
 12 files changed, 193 insertions(+), 120 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml

Comments

Krzysztof Kozlowski June 20, 2022, 6:34 p.m. UTC | #1 
On 17/05/2022 09:01, Krzysztof Kozlowski wrote:
> Hi,
> 
> Patches are mostly independent, so they can go via:
> 1. Qualcomm SoC (dt-bindings/soc: + arm64)
> 2. remoteproc (dt-bindings).
> 
> Changes since v1
> ================
> 1. Add review tags
> 2. Patch 8: Remove ref from label (Rob)
> 

Hey folks!

It has been a month since this patchset was sent.

The bindings part have Rob's ack. Maybe the remote-proc should go via DT
tree? Even if that happens, still the DTS wait for the same amount of
time... so not sure what to do here. Shall I pick it up as well?

Best regards,
Krzysztof
Bjorn Andersson July 3, 2022, 3:56 a.m. UTC | #2 
On Tue, 17 May 2022 09:01:01 +0200, Krzysztof Kozlowski wrote:
> Patches are mostly independent, so they can go via:
> 1. Qualcomm SoC (dt-bindings/soc: + arm64)
> 2. remoteproc (dt-bindings).
> 
> Changes since v1
> ================
> 1. Add review tags
> 2. Patch 8: Remove ref from label (Rob)
> 
> [...]

Applied, thanks!

[09/12] arm64: dts: qcom: ipq6018: add label to remoteproc node
        commit: f0b255b4f012055ab12137ecc1b68dfe12b06107
[10/12] arm64: dts: qcom: sdm630: remove unneeded address/size cells in glink-edge
        commit: dc74f89e3281f9ea5669831db05d56db0555ced2
[11/12] arm64: dts: qcom: sm8350: remove duplicated glink-edge interrupt
        commit: 140488b46b96aed232fc5e911a4455ec6e441177
[12/12] arm64: dts: qcom: sm8450: remove duplicated glink-edge interrupt
        commit: c372baf317f4e10e67b81594cc38607549557a93

Best regards,