mbox series

[v7,0/6] soc: qcom: add in-kernel pd-mapper implementation

Message ID 20240424-qcom-pd-mapper-v7-0-05f7fc646e0f@linaro.org (mailing list archive)
Headers show
Series soc: qcom: add in-kernel pd-mapper implementation | expand

Message

Dmitry Baryshkov April 24, 2024, 9:27 a.m. UTC
Protection domain mapper is a QMI service providing mapping between
'protection domains' and services supported / allowed in these domains.
For example such mapping is required for loading of the WiFi firmware or
for properly starting up the UCSI / altmode / battery manager support.

The existing userspace implementation has several issue. It doesn't play
well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the
firmware location is changed (or if the firmware was not available at
the time pd-mapper was started but the corresponding directory is
mounted later), etc.

However this configuration is largely static and common between
different platforms. Provide in-kernel service implementing static
per-platform data.

Unlike previous revisions of the patchset, this iteration uses static
configuration per platform, rather than building it dynamically from the
list of DSPs being started.

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Sibi Sankar <quic_sibis@quicinc.com>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Xilin Wu <wuxilin123@gmail.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
--

Changes in v7:
- Fixed modular build (Steev)
- Link to v6: https://lore.kernel.org/r/20240422-qcom-pd-mapper-v6-0-f96957d01207@linaro.org

Changes in v6:
- Reworked mutex to fix lockdep issue on deregistration
- Fixed dependencies between PD-mapper and remoteproc to fix modular
  builds (Krzysztof)
- Added EXPORT_SYMBOL_GPL to fix modular builds (Krzysztof)
- Fixed kerneldocs (Krzysztof)
- Removed extra pr_debug messages (Krzysztof)
- Fixed wcss build (Krzysztof)
- Added platforms which do not require protection domain mapping to
  silence the notice on those platforms
- Link to v5: https://lore.kernel.org/r/20240419-qcom-pd-mapper-v5-0-e35b6f847e99@linaro.org

Changes in v5:
- pdr: drop lock in pdr_register_listener, list_lock is already held (Chris Lew)
- pd_mapper: reworked to provide static configuration per platform
  (Bjorn)
- Link to v4: https://lore.kernel.org/r/20240311-qcom-pd-mapper-v4-0-24679cca5c24@linaro.org

Changes in v4:
- Fixed missing chunk, reenabled kfree in qmi_del_server (Konrad)
- Added configuration for sm6350 (Thanks to Luca)
- Removed RFC tag (Konrad)
- Link to v3: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-0-6858fa1ac1c8@linaro.org

Changes in RFC v3:
- Send start / stop notifications when PD-mapper domain list is changed
- Reworked the way PD-mapper treats protection domains, register all of
  them in a single batch
- Added SC7180 domains configuration based on TCL Book 14 GO
- Link to v2: https://lore.kernel.org/r/20240301-qcom-pd-mapper-v2-0-5d12a081d9d1@linaro.org

Changes in RFC v2:
- Swapped num_domains / domains (Konrad)
- Fixed an issue with battery not working on sc8280xp
- Added missing configuration for QCS404

---
Dmitry Baryshkov (6):
      soc: qcom: pdr: protect locator_addr with the main mutex
      soc: qcom: pdr: fix parsing of domains lists
      soc: qcom: pdr: extract PDR message marshalling data
      soc: qcom: qmi: add a way to remove running service
      soc: qcom: add pd-mapper implementation
      remoteproc: qcom: enable in-kernel PD mapper

 drivers/remoteproc/Kconfig          |   4 +
 drivers/remoteproc/qcom_q6v5_adsp.c |  11 +-
 drivers/remoteproc/qcom_q6v5_mss.c  |  10 +-
 drivers/remoteproc/qcom_q6v5_pas.c  |  12 +-
 drivers/remoteproc/qcom_q6v5_wcss.c |  12 +-
 drivers/soc/qcom/Kconfig            |  14 +
 drivers/soc/qcom/Makefile           |   2 +
 drivers/soc/qcom/pdr_interface.c    |   6 +-
 drivers/soc/qcom/pdr_internal.h     | 318 ++---------------
 drivers/soc/qcom/qcom_pd_mapper.c   | 656 ++++++++++++++++++++++++++++++++++++
 drivers/soc/qcom/qcom_pdr_msg.c     | 353 +++++++++++++++++++
 drivers/soc/qcom/qmi_interface.c    |  67 ++++
 include/linux/soc/qcom/pd_mapper.h  |  28 ++
 include/linux/soc/qcom/qmi.h        |   2 +
 14 files changed, 1193 insertions(+), 302 deletions(-)
---
base-commit: a59668a9397e7245b26e9be85d23f242ff757ae8
change-id: 20240301-qcom-pd-mapper-e12d622d4ad0

Best regards,

Comments

Steev Klimaszewski April 25, 2024, 7:08 a.m. UTC | #1
Hi Dmitry,

On Wed, Apr 24, 2024 at 4:28 AM Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> Protection domain mapper is a QMI service providing mapping between
> 'protection domains' and services supported / allowed in these domains.
> For example such mapping is required for loading of the WiFi firmware or
> for properly starting up the UCSI / altmode / battery manager support.
>
> The existing userspace implementation has several issue. It doesn't play
> well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the
> firmware location is changed (or if the firmware was not available at
> the time pd-mapper was started but the corresponding directory is
> mounted later), etc.
>
> However this configuration is largely static and common between
> different platforms. Provide in-kernel service implementing static
> per-platform data.
>
> Unlike previous revisions of the patchset, this iteration uses static
> configuration per platform, rather than building it dynamically from the
> list of DSPs being started.
>
> To: Bjorn Andersson <andersson@kernel.org>
> To: Konrad Dybcio <konrad.dybcio@linaro.org>
> To: Sibi Sankar <quic_sibis@quicinc.com>
> To: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: Johan Hovold <johan+linaro@kernel.org>
> Cc: Xilin Wu <wuxilin123@gmail.com>
> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
> --
>
> Changes in v7:
> - Fixed modular build (Steev)
> - Link to v6: https://lore.kernel.org/r/20240422-qcom-pd-mapper-v6-0-f96957d01207@linaro.org
>
> Changes in v6:
> - Reworked mutex to fix lockdep issue on deregistration
> - Fixed dependencies between PD-mapper and remoteproc to fix modular
>   builds (Krzysztof)
> - Added EXPORT_SYMBOL_GPL to fix modular builds (Krzysztof)
> - Fixed kerneldocs (Krzysztof)
> - Removed extra pr_debug messages (Krzysztof)
> - Fixed wcss build (Krzysztof)
> - Added platforms which do not require protection domain mapping to
>   silence the notice on those platforms
> - Link to v5: https://lore.kernel.org/r/20240419-qcom-pd-mapper-v5-0-e35b6f847e99@linaro.org
>
> Changes in v5:
> - pdr: drop lock in pdr_register_listener, list_lock is already held (Chris Lew)
> - pd_mapper: reworked to provide static configuration per platform
>   (Bjorn)
> - Link to v4: https://lore.kernel.org/r/20240311-qcom-pd-mapper-v4-0-24679cca5c24@linaro.org
>
> Changes in v4:
> - Fixed missing chunk, reenabled kfree in qmi_del_server (Konrad)
> - Added configuration for sm6350 (Thanks to Luca)
> - Removed RFC tag (Konrad)
> - Link to v3: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-0-6858fa1ac1c8@linaro.org
>
> Changes in RFC v3:
> - Send start / stop notifications when PD-mapper domain list is changed
> - Reworked the way PD-mapper treats protection domains, register all of
>   them in a single batch
> - Added SC7180 domains configuration based on TCL Book 14 GO
> - Link to v2: https://lore.kernel.org/r/20240301-qcom-pd-mapper-v2-0-5d12a081d9d1@linaro.org
>
> Changes in RFC v2:
> - Swapped num_domains / domains (Konrad)
> - Fixed an issue with battery not working on sc8280xp
> - Added missing configuration for QCS404
>
> ---
> Dmitry Baryshkov (6):
>       soc: qcom: pdr: protect locator_addr with the main mutex
>       soc: qcom: pdr: fix parsing of domains lists
>       soc: qcom: pdr: extract PDR message marshalling data
>       soc: qcom: qmi: add a way to remove running service
>       soc: qcom: add pd-mapper implementation
>       remoteproc: qcom: enable in-kernel PD mapper
>
>  drivers/remoteproc/Kconfig          |   4 +
>  drivers/remoteproc/qcom_q6v5_adsp.c |  11 +-
>  drivers/remoteproc/qcom_q6v5_mss.c  |  10 +-
>  drivers/remoteproc/qcom_q6v5_pas.c  |  12 +-
>  drivers/remoteproc/qcom_q6v5_wcss.c |  12 +-
>  drivers/soc/qcom/Kconfig            |  14 +
>  drivers/soc/qcom/Makefile           |   2 +
>  drivers/soc/qcom/pdr_interface.c    |   6 +-
>  drivers/soc/qcom/pdr_internal.h     | 318 ++---------------
>  drivers/soc/qcom/qcom_pd_mapper.c   | 656 ++++++++++++++++++++++++++++++++++++
>  drivers/soc/qcom/qcom_pdr_msg.c     | 353 +++++++++++++++++++
>  drivers/soc/qcom/qmi_interface.c    |  67 ++++
>  include/linux/soc/qcom/pd_mapper.h  |  28 ++
>  include/linux/soc/qcom/qmi.h        |   2 +
>  14 files changed, 1193 insertions(+), 302 deletions(-)
> ---
> base-commit: a59668a9397e7245b26e9be85d23f242ff757ae8
> change-id: 20240301-qcom-pd-mapper-e12d622d4ad0
>
> Best regards,
> --
> Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
>
I've tested this series over a large number of reboots, and the p-d
devices(?) do always seem to come up (with the pd-mapper service
disabled) on my Thinkpad X13s.  One less service to run in userland!
Tested-by: Steev Klimaszewski <steev@kali.org>
Dmitry Baryshkov April 25, 2024, 7:10 a.m. UTC | #2
On Thu, 25 Apr 2024 at 10:08, Steev Klimaszewski <steev@kali.org> wrote:
>
> Hi Dmitry,
>
> On Wed, Apr 24, 2024 at 4:28 AM Dmitry Baryshkov
> <dmitry.baryshkov@linaro.org> wrote:
> >
> > Protection domain mapper is a QMI service providing mapping between
> > 'protection domains' and services supported / allowed in these domains.
> > For example such mapping is required for loading of the WiFi firmware or
> > for properly starting up the UCSI / altmode / battery manager support.
> >
> > The existing userspace implementation has several issue. It doesn't play
> > well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the
> > firmware location is changed (or if the firmware was not available at
> > the time pd-mapper was started but the corresponding directory is
> > mounted later), etc.
> >
> > However this configuration is largely static and common between
> > different platforms. Provide in-kernel service implementing static
> > per-platform data.
> >
> > Unlike previous revisions of the patchset, this iteration uses static
> > configuration per platform, rather than building it dynamically from the
> > list of DSPs being started.
> >
> > To: Bjorn Andersson <andersson@kernel.org>
> > To: Konrad Dybcio <konrad.dybcio@linaro.org>
> > To: Sibi Sankar <quic_sibis@quicinc.com>
> > To: Mathieu Poirier <mathieu.poirier@linaro.org>
> > Cc: linux-arm-msm@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > Cc: linux-remoteproc@vger.kernel.org
> > Cc: Johan Hovold <johan+linaro@kernel.org>
> > Cc: Xilin Wu <wuxilin123@gmail.com>
> > Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
> > --
> >
> > Changes in v7:
> > - Fixed modular build (Steev)
> > - Link to v6: https://lore.kernel.org/r/20240422-qcom-pd-mapper-v6-0-f96957d01207@linaro.org
> >
> > Changes in v6:
> > - Reworked mutex to fix lockdep issue on deregistration
> > - Fixed dependencies between PD-mapper and remoteproc to fix modular
> >   builds (Krzysztof)
> > - Added EXPORT_SYMBOL_GPL to fix modular builds (Krzysztof)
> > - Fixed kerneldocs (Krzysztof)
> > - Removed extra pr_debug messages (Krzysztof)
> > - Fixed wcss build (Krzysztof)
> > - Added platforms which do not require protection domain mapping to
> >   silence the notice on those platforms
> > - Link to v5: https://lore.kernel.org/r/20240419-qcom-pd-mapper-v5-0-e35b6f847e99@linaro.org
> >
> > Changes in v5:
> > - pdr: drop lock in pdr_register_listener, list_lock is already held (Chris Lew)
> > - pd_mapper: reworked to provide static configuration per platform
> >   (Bjorn)
> > - Link to v4: https://lore.kernel.org/r/20240311-qcom-pd-mapper-v4-0-24679cca5c24@linaro.org
> >
> > Changes in v4:
> > - Fixed missing chunk, reenabled kfree in qmi_del_server (Konrad)
> > - Added configuration for sm6350 (Thanks to Luca)
> > - Removed RFC tag (Konrad)
> > - Link to v3: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-0-6858fa1ac1c8@linaro.org
> >
> > Changes in RFC v3:
> > - Send start / stop notifications when PD-mapper domain list is changed
> > - Reworked the way PD-mapper treats protection domains, register all of
> >   them in a single batch
> > - Added SC7180 domains configuration based on TCL Book 14 GO
> > - Link to v2: https://lore.kernel.org/r/20240301-qcom-pd-mapper-v2-0-5d12a081d9d1@linaro.org
> >
> > Changes in RFC v2:
> > - Swapped num_domains / domains (Konrad)
> > - Fixed an issue with battery not working on sc8280xp
> > - Added missing configuration for QCS404
> >
> > ---
> > Dmitry Baryshkov (6):
> >       soc: qcom: pdr: protect locator_addr with the main mutex
> >       soc: qcom: pdr: fix parsing of domains lists
> >       soc: qcom: pdr: extract PDR message marshalling data
> >       soc: qcom: qmi: add a way to remove running service
> >       soc: qcom: add pd-mapper implementation
> >       remoteproc: qcom: enable in-kernel PD mapper
> >
> >  drivers/remoteproc/Kconfig          |   4 +
> >  drivers/remoteproc/qcom_q6v5_adsp.c |  11 +-
> >  drivers/remoteproc/qcom_q6v5_mss.c  |  10 +-
> >  drivers/remoteproc/qcom_q6v5_pas.c  |  12 +-
> >  drivers/remoteproc/qcom_q6v5_wcss.c |  12 +-
> >  drivers/soc/qcom/Kconfig            |  14 +
> >  drivers/soc/qcom/Makefile           |   2 +
> >  drivers/soc/qcom/pdr_interface.c    |   6 +-
> >  drivers/soc/qcom/pdr_internal.h     | 318 ++---------------
> >  drivers/soc/qcom/qcom_pd_mapper.c   | 656 ++++++++++++++++++++++++++++++++++++
> >  drivers/soc/qcom/qcom_pdr_msg.c     | 353 +++++++++++++++++++
> >  drivers/soc/qcom/qmi_interface.c    |  67 ++++
> >  include/linux/soc/qcom/pd_mapper.h  |  28 ++
> >  include/linux/soc/qcom/qmi.h        |   2 +
> >  14 files changed, 1193 insertions(+), 302 deletions(-)
> > ---
> > base-commit: a59668a9397e7245b26e9be85d23f242ff757ae8
> > change-id: 20240301-qcom-pd-mapper-e12d622d4ad0
> >
> > Best regards,
> > --
> > Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >
> >
> I've tested this series over a large number of reboots, and the p-d
> devices(?) do always seem to come up (with the pd-mapper service
> disabled) on my Thinkpad X13s.  One less service to run in userland!
> Tested-by: Steev Klimaszewski <steev@kali.org>

Thank you!
Alexey Minnekhanov April 26, 2024, 2:02 p.m. UTC | #3
On 24.04.2024 12:27, Dmitry Baryshkov wrote:
> Protection domain mapper is a QMI service providing mapping between
> 'protection domains' and services supported / allowed in these domains.
> For example such mapping is required for loading of the WiFi firmware or
> for properly starting up the UCSI / altmode / battery manager support.
> 
> The existing userspace implementation has several issue. It doesn't play
> well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the
> firmware location is changed (or if the firmware was not available at
> the time pd-mapper was started but the corresponding directory is
> mounted later), etc.
> 
> However this configuration is largely static and common between
> different platforms. Provide in-kernel service implementing static
> per-platform data.
> 
> Unlike previous revisions of the patchset, this iteration uses static
> configuration per platform, rather than building it dynamically from the
> list of DSPs being started.
> 
> To: Bjorn Andersson <andersson@kernel.org>
> To: Konrad Dybcio <konrad.dybcio@linaro.org>
> To: Sibi Sankar <quic_sibis@quicinc.com>
> To: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: Johan Hovold <johan+linaro@kernel.org>
> Cc: Xilin Wu <wuxilin123@gmail.com>
> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
> --
> 
> Changes in v7:
> - Fixed modular build (Steev)
> - Link to v6: https://lore.kernel.org/r/20240422-qcom-pd-mapper-v6-0-f96957d01207@linaro.org
> 
> Changes in v6:
> - Reworked mutex to fix lockdep issue on deregistration
> - Fixed dependencies between PD-mapper and remoteproc to fix modular
>    builds (Krzysztof)
> - Added EXPORT_SYMBOL_GPL to fix modular builds (Krzysztof)
> - Fixed kerneldocs (Krzysztof)
> - Removed extra pr_debug messages (Krzysztof)
> - Fixed wcss build (Krzysztof)
> - Added platforms which do not require protection domain mapping to
>    silence the notice on those platforms
> - Link to v5: https://lore.kernel.org/r/20240419-qcom-pd-mapper-v5-0-e35b6f847e99@linaro.org
> 
> Changes in v5:
> - pdr: drop lock in pdr_register_listener, list_lock is already held (Chris Lew)
> - pd_mapper: reworked to provide static configuration per platform
>    (Bjorn)
> - Link to v4: https://lore.kernel.org/r/20240311-qcom-pd-mapper-v4-0-24679cca5c24@linaro.org
> 
> Changes in v4:
> - Fixed missing chunk, reenabled kfree in qmi_del_server (Konrad)
> - Added configuration for sm6350 (Thanks to Luca)
> - Removed RFC tag (Konrad)
> - Link to v3: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-0-6858fa1ac1c8@linaro.org
> 
> Changes in RFC v3:
> - Send start / stop notifications when PD-mapper domain list is changed
> - Reworked the way PD-mapper treats protection domains, register all of
>    them in a single batch
> - Added SC7180 domains configuration based on TCL Book 14 GO
> - Link to v2: https://lore.kernel.org/r/20240301-qcom-pd-mapper-v2-0-5d12a081d9d1@linaro.org
> 
> Changes in RFC v2:
> - Swapped num_domains / domains (Konrad)
> - Fixed an issue with battery not working on sc8280xp
> - Added missing configuration for QCS404
> 

I've tested this series on sdm660 device, with userspace pd-mapper
service disabled, and don't see any regressions - e.g Wi-Fi/BT
still come online and work as before.

Debug logs:
https://paste.sr.ht/~minlexx/bd03db4c582a3275078ce4fd05ea76ce46a52b8e

Missing cdsp_root and adsp_sensors PDs are not currently an issue,
because those are not enabled yet on SDM660 or hard to test, so

Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org>