diff mbox series

remoteproc: qcom: wcnss: Add iris completion barrier

Message ID 1581530043-12112-1-git-send-email-loic.poulain@linaro.org (mailing list archive)
State New, archived
Headers show
Series remoteproc: qcom: wcnss: Add iris completion barrier | expand

Commit Message

Loic Poulain Feb. 12, 2020, 5:54 p.m. UTC
There is no guarantee that the iris pointer will be assigned before
remoteproc subsystem starts the wcnss rproc, actually it depends how
fast rproc subsystem is able to get the firmware to trigger the start.

This leads to sporadic wifi/bluetooth initialization issue on db410c
with the following output:
 remoteproc remoteproc1: powering up a204000.wcnss
 remoteproc remoteproc1: Booting fw image qcom/msm8916/wcnss.mdt...
 qcom-wcnss-pil a204000.wcnss: no iris registered
 remoteproc remoteproc1: can't start rproc a204000.wcnss: -22

This patch introduces a 'iris_assigned' completion barrier to fix
this issue. Maybe not the most elegant way, but it does the trick.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
 drivers/remoteproc/qcom_wcnss.c | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Mathieu Poirier Feb. 14, 2020, 8:46 p.m. UTC | #1
On Wed, Feb 12, 2020 at 06:54:03PM +0100, Loic Poulain wrote:
> There is no guarantee that the iris pointer will be assigned before
> remoteproc subsystem starts the wcnss rproc, actually it depends how
> fast rproc subsystem is able to get the firmware to trigger the start.
> 
> This leads to sporadic wifi/bluetooth initialization issue on db410c
> with the following output:
>  remoteproc remoteproc1: powering up a204000.wcnss
>  remoteproc remoteproc1: Booting fw image qcom/msm8916/wcnss.mdt...
>  qcom-wcnss-pil a204000.wcnss: no iris registered
>  remoteproc remoteproc1: can't start rproc a204000.wcnss: -22
> 
> This patch introduces a 'iris_assigned' completion barrier to fix
> this issue. Maybe not the most elegant way, but it does the trick.
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
>  drivers/remoteproc/qcom_wcnss.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
> index a0468b3..c888282 100644
> --- a/drivers/remoteproc/qcom_wcnss.c
> +++ b/drivers/remoteproc/qcom_wcnss.c
> @@ -84,6 +84,7 @@ struct qcom_wcnss {
>  
>  	struct completion start_done;
>  	struct completion stop_done;
> +	struct completion iris_assigned;
>  
>  	phys_addr_t mem_phys;
>  	phys_addr_t mem_reloc;
> @@ -138,6 +139,7 @@ void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
>  
>  	wcnss->iris = iris;
>  	wcnss->use_48mhz_xo = use_48mhz_xo;
> +	complete(&wcnss->iris_assigned);
>  
>  	mutex_unlock(&wcnss->iris_lock);
>  }
> @@ -213,6 +215,10 @@ static int wcnss_start(struct rproc *rproc)
>  	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
>  	int ret;
>  
> +	/* Grant some time for iris registration */
> +	wait_for_completion_timeout(&wcnss->iris_assigned,
> +				    msecs_to_jiffies(5000));
> +
>  	mutex_lock(&wcnss->iris_lock);
>  	if (!wcnss->iris) {
>  		dev_err(wcnss->dev, "no iris registered\n");
> @@ -494,6 +500,7 @@ static int wcnss_probe(struct platform_device *pdev)
>  
>  	init_completion(&wcnss->start_done);
>  	init_completion(&wcnss->stop_done);
> +	init_completion(&wcnss->iris_assigned);
>  
>  	mutex_init(&wcnss->iris_lock);

If I understand the problem correctly, if loading the fw image takes long enough,
qcom_iris_probe() that is triggered by of_platform_populate() has time to
complete and call qcom_wcnss_assign_iris().  Otherwise the remoteproc core calls
wcnss_start() before qcom_wcnss_assign_iris() had the opportunity to run.

If I am correct, would it be possible to call of_platform_populate() before
calling rproc_add()?  There might be some refactoring to do but that's probably
better than introducing a delay...

Thanks,
Mathieu

>  
> -- 
> 2.7.4
>
Bjorn Andersson Feb. 15, 2020, 7:46 a.m. UTC | #2
On Fri 14 Feb 12:46 PST 2020, Mathieu Poirier wrote:

> On Wed, Feb 12, 2020 at 06:54:03PM +0100, Loic Poulain wrote:
> > There is no guarantee that the iris pointer will be assigned before
> > remoteproc subsystem starts the wcnss rproc, actually it depends how
> > fast rproc subsystem is able to get the firmware to trigger the start.
> > 
> > This leads to sporadic wifi/bluetooth initialization issue on db410c
> > with the following output:
> >  remoteproc remoteproc1: powering up a204000.wcnss
> >  remoteproc remoteproc1: Booting fw image qcom/msm8916/wcnss.mdt...
> >  qcom-wcnss-pil a204000.wcnss: no iris registered
> >  remoteproc remoteproc1: can't start rproc a204000.wcnss: -22
> > 
> > This patch introduces a 'iris_assigned' completion barrier to fix
> > this issue. Maybe not the most elegant way, but it does the trick.
> > 
> > Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> > ---
> >  drivers/remoteproc/qcom_wcnss.c | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
> > index a0468b3..c888282 100644
> > --- a/drivers/remoteproc/qcom_wcnss.c
> > +++ b/drivers/remoteproc/qcom_wcnss.c
> > @@ -84,6 +84,7 @@ struct qcom_wcnss {
> >  
> >  	struct completion start_done;
> >  	struct completion stop_done;
> > +	struct completion iris_assigned;
> >  
> >  	phys_addr_t mem_phys;
> >  	phys_addr_t mem_reloc;
> > @@ -138,6 +139,7 @@ void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
> >  
> >  	wcnss->iris = iris;
> >  	wcnss->use_48mhz_xo = use_48mhz_xo;
> > +	complete(&wcnss->iris_assigned);
> >  
> >  	mutex_unlock(&wcnss->iris_lock);
> >  }
> > @@ -213,6 +215,10 @@ static int wcnss_start(struct rproc *rproc)
> >  	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
> >  	int ret;
> >  
> > +	/* Grant some time for iris registration */
> > +	wait_for_completion_timeout(&wcnss->iris_assigned,
> > +				    msecs_to_jiffies(5000));
> > +
> >  	mutex_lock(&wcnss->iris_lock);
> >  	if (!wcnss->iris) {
> >  		dev_err(wcnss->dev, "no iris registered\n");
> > @@ -494,6 +500,7 @@ static int wcnss_probe(struct platform_device *pdev)
> >  
> >  	init_completion(&wcnss->start_done);
> >  	init_completion(&wcnss->stop_done);
> > +	init_completion(&wcnss->iris_assigned);
> >  
> >  	mutex_init(&wcnss->iris_lock);
> 
> If I understand the problem correctly, if loading the fw image takes long enough,
> qcom_iris_probe() that is triggered by of_platform_populate() has time to
> complete and call qcom_wcnss_assign_iris().  Otherwise the remoteproc core calls
> wcnss_start() before qcom_wcnss_assign_iris() had the opportunity to run.
> 
> If I am correct, would it be possible to call of_platform_populate() before
> calling rproc_add()?  There might be some refactoring to do but that's probably
> better than introducing a delay...
> 

We'll still have the problem that if the iris device probe defer on the
regulators it still might not be in place when we're hitting
wcnss_start().

Unfortunately we need a struct device with the iris of_node associated,
in order get hold of the regulators, but we should be able to drop the
platform_driver and the probing in favor of just making up a struct
device, associating it with the of_node and requesting the iris
regulators using this.

That would remove the whole timing aspect and we can properly probe
defer the qcom_wcnss when the iris regulators are not yet in place.

Regards,
Bjorn
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index a0468b3..c888282 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -84,6 +84,7 @@  struct qcom_wcnss {
 
 	struct completion start_done;
 	struct completion stop_done;
+	struct completion iris_assigned;
 
 	phys_addr_t mem_phys;
 	phys_addr_t mem_reloc;
@@ -138,6 +139,7 @@  void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
 
 	wcnss->iris = iris;
 	wcnss->use_48mhz_xo = use_48mhz_xo;
+	complete(&wcnss->iris_assigned);
 
 	mutex_unlock(&wcnss->iris_lock);
 }
@@ -213,6 +215,10 @@  static int wcnss_start(struct rproc *rproc)
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
 	int ret;
 
+	/* Grant some time for iris registration */
+	wait_for_completion_timeout(&wcnss->iris_assigned,
+				    msecs_to_jiffies(5000));
+
 	mutex_lock(&wcnss->iris_lock);
 	if (!wcnss->iris) {
 		dev_err(wcnss->dev, "no iris registered\n");
@@ -494,6 +500,7 @@  static int wcnss_probe(struct platform_device *pdev)
 
 	init_completion(&wcnss->start_done);
 	init_completion(&wcnss->stop_done);
+	init_completion(&wcnss->iris_assigned);
 
 	mutex_init(&wcnss->iris_lock);