diff mbox series

[v3,3/3] remoteproc: Add coredump debugfs entry

Message ID 1589486856-23440-4-git-send-email-rishabhb@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Extend coredump functionality | expand

Commit Message

Rishabh Bhatnagar May 14, 2020, 8:07 p.m. UTC
Add coredump debugfs entry to configure the type of dump that will
be collected during recovery. User can select between default or
inline coredump functionality. Also coredump collection can be
disabled through this interface.
This functionality can be configured differently for different
remote processors.

Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 drivers/remoteproc/remoteproc_debugfs.c | 86 +++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

Comments

Bjorn Andersson May 20, 2020, 12:02 a.m. UTC | #1
On Thu 14 May 13:07 PDT 2020, Rishabh Bhatnagar wrote:

> Add coredump debugfs entry to configure the type of dump that will
> be collected during recovery. User can select between default or
> inline coredump functionality. Also coredump collection can be
> disabled through this interface.
> This functionality can be configured differently for different
> remote processors.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/remoteproc/remoteproc_debugfs.c | 86 +++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 
> diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
> index 732770e..2f611de 100644
> --- a/drivers/remoteproc/remoteproc_debugfs.c
> +++ b/drivers/remoteproc/remoteproc_debugfs.c
> @@ -28,6 +28,90 @@
>  static struct dentry *rproc_dbg;
>  
>  /*
> + * A coredump-configuration-to-string lookup table, for exposing a
> + * human readable configuration via debugfs. Always keep in sync with
> + * enum rproc_coredump_mechanism
> + */
> +static const char * const rproc_coredump_str[] = {
> +	[COREDUMP_DEFAULT]	= "default",
> +	[COREDUMP_INLINE]	= "inline",
> +	[COREDUMP_DISABLED]	= "disabled",
> +};
> +
> +/* Expose the current coredump configuration via debugfs */
> +static ssize_t rproc_coredump_read(struct file *filp, char __user *userbuf,
> +				    size_t count, loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	const char *buf = rproc_coredump_str[rproc->dump_conf];
> +
> +	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
> +}
> +
> +/*
> + * By writing to the 'coredump' debugfs entry, we control the behavior of the
> + * coredump mechanism dynamically. The default value of this entry is "default".
> + *
> + * The 'coredump' debugfs entry supports these commands:
> + *
> + * default:	This is the default coredump mechanism. When the remoteproc
> + *		crashes the entire coredump will be copied to a separate buffer
> + *		and exposed to userspace.
> + *
> + * inline:	The coredump will not be copied to a separate buffer and the
> + *		recovery process will have to wait until data is read by
> + *		userspace. But this avoid usage of extra memory.
> + *
> + * disabled:	This will disable coredump. Recovery will proceed without
> + *		collecting any dump.
> + */
> +static ssize_t rproc_coredump_write(struct file *filp,
> +				     const char __user *user_buf, size_t count,
> +				     loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	int ret, err = 0;
> +	char buf[20];
> +
> +	if (count > sizeof(buf))
> +		return -EINVAL;
> +
> +	ret = copy_from_user(buf, user_buf, count);
> +	if (ret)
> +		return -EFAULT;
> +
> +	/* remove end of line */
> +	if (buf[count - 1] == '\n')
> +		buf[count - 1] = '\0';
> +
> +	if (rproc->state == RPROC_CRASHED) {
> +		dev_err(&rproc->dev, "can't change coredump configuration\n");
> +		err = -EBUSY;
> +		goto out;
> +	}
> +
> +	if (!strncmp(buf, "disable", count))
> +		rproc->dump_conf = COREDUMP_DISABLED;
> +	else if (!strncmp(buf, "inline", count))
> +		rproc->dump_conf = COREDUMP_INLINE;
> +	else if (!strncmp(buf, "default", count))
> +		rproc->dump_conf = COREDUMP_DEFAULT;
> +	else {
> +		dev_err(&rproc->dev, "Invalid coredump configuration\n");
> +		err = -EINVAL;
> +	}
> +out:
> +	return err ? err : count;
> +}
> +
> +static const struct file_operations rproc_coredump_fops = {
> +	.read = rproc_coredump_read,
> +	.write = rproc_coredump_write,
> +	.open = simple_open,
> +	.llseek = generic_file_llseek,
> +};
> +
> +/*
>   * Some remote processors may support dumping trace logs into a shared
>   * memory buffer. We expose this trace buffer using debugfs, so users
>   * can easily tell what's going on remotely.
> @@ -337,6 +421,8 @@ void rproc_create_debug_dir(struct rproc *rproc)
>  			    rproc, &rproc_rsc_table_fops);
>  	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
>  			    rproc, &rproc_carveouts_fops);
> +	debugfs_create_file("coredump", 0600, rproc->dbg_dir,
> +			    rproc, &rproc_coredump_fops);
>  }
>  
>  void __init rproc_init_debugfs(void)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
Mathieu Poirier May 21, 2020, 9:26 p.m. UTC | #2
On Thu, May 14, 2020 at 01:07:36PM -0700, Rishabh Bhatnagar wrote:
> Add coredump debugfs entry to configure the type of dump that will
> be collected during recovery. User can select between default or
> inline coredump functionality. Also coredump collection can be
> disabled through this interface.
> This functionality can be configured differently for different
> remote processors.
> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/remoteproc/remoteproc_debugfs.c | 86 +++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 
> diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
> index 732770e..2f611de 100644
> --- a/drivers/remoteproc/remoteproc_debugfs.c
> +++ b/drivers/remoteproc/remoteproc_debugfs.c
> @@ -28,6 +28,90 @@
>  static struct dentry *rproc_dbg;
>  
>  /*
> + * A coredump-configuration-to-string lookup table, for exposing a
> + * human readable configuration via debugfs. Always keep in sync with
> + * enum rproc_coredump_mechanism
> + */
> +static const char * const rproc_coredump_str[] = {
> +	[COREDUMP_DEFAULT]	= "default",
> +	[COREDUMP_INLINE]	= "inline",
> +	[COREDUMP_DISABLED]	= "disabled",
> +};
> +
> +/* Expose the current coredump configuration via debugfs */
> +static ssize_t rproc_coredump_read(struct file *filp, char __user *userbuf,
> +				    size_t count, loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	const char *buf = rproc_coredump_str[rproc->dump_conf];
> +
> +	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
> +}
> +
> +/*
> + * By writing to the 'coredump' debugfs entry, we control the behavior of the
> + * coredump mechanism dynamically. The default value of this entry is "default".
> + *
> + * The 'coredump' debugfs entry supports these commands:
> + *
> + * default:	This is the default coredump mechanism. When the remoteproc
> + *		crashes the entire coredump will be copied to a separate buffer
> + *		and exposed to userspace.
> + *
> + * inline:	The coredump will not be copied to a separate buffer and the
> + *		recovery process will have to wait until data is read by
> + *		userspace. But this avoid usage of extra memory.
> + *
> + * disabled:	This will disable coredump. Recovery will proceed without
> + *		collecting any dump.
> + */
> +static ssize_t rproc_coredump_write(struct file *filp,
> +				     const char __user *user_buf, size_t count,
> +				     loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	int ret, err = 0;
> +	char buf[20];
> +
> +	if (count > sizeof(buf))
> +		return -EINVAL;
> +
> +	ret = copy_from_user(buf, user_buf, count);
> +	if (ret)
> +		return -EFAULT;
> +
> +	/* remove end of line */
> +	if (buf[count - 1] == '\n')
> +		buf[count - 1] = '\0';
> +
> +	if (rproc->state == RPROC_CRASHED) {
> +		dev_err(&rproc->dev, "can't change coredump configuration\n");
> +		err = -EBUSY;
> +		goto out;
> +	}
> +
> +	if (!strncmp(buf, "disable", count))
> +		rproc->dump_conf = COREDUMP_DISABLED;
> +	else if (!strncmp(buf, "inline", count))
> +		rproc->dump_conf = COREDUMP_INLINE;
> +	else if (!strncmp(buf, "default", count))
> +		rproc->dump_conf = COREDUMP_DEFAULT;
> +	else {
> +		dev_err(&rproc->dev, "Invalid coredump configuration\n");
> +		err = -EINVAL;
> +	}
> +out:
> +	return err ? err : count;
> +}
> +
> +static const struct file_operations rproc_coredump_fops = {
> +	.read = rproc_coredump_read,
> +	.write = rproc_coredump_write,
> +	.open = simple_open,
> +	.llseek = generic_file_llseek,
> +};
> +
> +/*
>   * Some remote processors may support dumping trace logs into a shared
>   * memory buffer. We expose this trace buffer using debugfs, so users
>   * can easily tell what's going on remotely.
> @@ -337,6 +421,8 @@ void rproc_create_debug_dir(struct rproc *rproc)
>  			    rproc, &rproc_rsc_table_fops);
>  	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
>  			    rproc, &rproc_carveouts_fops);
> +	debugfs_create_file("coredump", 0600, rproc->dbg_dir,
> +			    rproc, &rproc_coredump_fops);

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

>  }
>  
>  void __init rproc_init_debugfs(void)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
diff mbox series

Patch

diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 732770e..2f611de 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -28,6 +28,90 @@ 
 static struct dentry *rproc_dbg;
 
 /*
+ * A coredump-configuration-to-string lookup table, for exposing a
+ * human readable configuration via debugfs. Always keep in sync with
+ * enum rproc_coredump_mechanism
+ */
+static const char * const rproc_coredump_str[] = {
+	[COREDUMP_DEFAULT]	= "default",
+	[COREDUMP_INLINE]	= "inline",
+	[COREDUMP_DISABLED]	= "disabled",
+};
+
+/* Expose the current coredump configuration via debugfs */
+static ssize_t rproc_coredump_read(struct file *filp, char __user *userbuf,
+				    size_t count, loff_t *ppos)
+{
+	struct rproc *rproc = filp->private_data;
+	const char *buf = rproc_coredump_str[rproc->dump_conf];
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+}
+
+/*
+ * By writing to the 'coredump' debugfs entry, we control the behavior of the
+ * coredump mechanism dynamically. The default value of this entry is "default".
+ *
+ * The 'coredump' debugfs entry supports these commands:
+ *
+ * default:	This is the default coredump mechanism. When the remoteproc
+ *		crashes the entire coredump will be copied to a separate buffer
+ *		and exposed to userspace.
+ *
+ * inline:	The coredump will not be copied to a separate buffer and the
+ *		recovery process will have to wait until data is read by
+ *		userspace. But this avoid usage of extra memory.
+ *
+ * disabled:	This will disable coredump. Recovery will proceed without
+ *		collecting any dump.
+ */
+static ssize_t rproc_coredump_write(struct file *filp,
+				     const char __user *user_buf, size_t count,
+				     loff_t *ppos)
+{
+	struct rproc *rproc = filp->private_data;
+	int ret, err = 0;
+	char buf[20];
+
+	if (count > sizeof(buf))
+		return -EINVAL;
+
+	ret = copy_from_user(buf, user_buf, count);
+	if (ret)
+		return -EFAULT;
+
+	/* remove end of line */
+	if (buf[count - 1] == '\n')
+		buf[count - 1] = '\0';
+
+	if (rproc->state == RPROC_CRASHED) {
+		dev_err(&rproc->dev, "can't change coredump configuration\n");
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (!strncmp(buf, "disable", count))
+		rproc->dump_conf = COREDUMP_DISABLED;
+	else if (!strncmp(buf, "inline", count))
+		rproc->dump_conf = COREDUMP_INLINE;
+	else if (!strncmp(buf, "default", count))
+		rproc->dump_conf = COREDUMP_DEFAULT;
+	else {
+		dev_err(&rproc->dev, "Invalid coredump configuration\n");
+		err = -EINVAL;
+	}
+out:
+	return err ? err : count;
+}
+
+static const struct file_operations rproc_coredump_fops = {
+	.read = rproc_coredump_read,
+	.write = rproc_coredump_write,
+	.open = simple_open,
+	.llseek = generic_file_llseek,
+};
+
+/*
  * Some remote processors may support dumping trace logs into a shared
  * memory buffer. We expose this trace buffer using debugfs, so users
  * can easily tell what's going on remotely.
@@ -337,6 +421,8 @@  void rproc_create_debug_dir(struct rproc *rproc)
 			    rproc, &rproc_rsc_table_fops);
 	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
 			    rproc, &rproc_carveouts_fops);
+	debugfs_create_file("coredump", 0600, rproc->dbg_dir,
+			    rproc, &rproc_coredump_fops);
 }
 
 void __init rproc_init_debugfs(void)