diff mbox series

[v3,3/3] remoteproc: Add recovery configuration to sysfs

Message ID 1599174226-2307-4-git-send-email-rishabhb@codeaurora.org
State New
Headers show
Series Expose recovery/coredump configuration from sysfs | expand

Commit Message

Rishabh Bhatnagar Sept. 3, 2020, 11:03 p.m. UTC
Expose recovery configuration in sysfs under a feature
flag. This is useful for systems where access to
debugfs might be limited.

Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 Documentation/ABI/testing/sysfs-class-remoteproc | 20 ++++++
 drivers/remoteproc/remoteproc_debugfs.c          | 78 ------------------------
 drivers/remoteproc/remoteproc_sysfs.c            | 58 ++++++++++++++++++
 3 files changed, 78 insertions(+), 78 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
index f6c44fa..7368b50 100644
--- a/Documentation/ABI/testing/sysfs-class-remoteproc
+++ b/Documentation/ABI/testing/sysfs-class-remoteproc
@@ -82,3 +82,23 @@  Description:	Remote processor coredump configuration
 		all data is read by usersapce.
 
 		"disabled" means no dump will be collected.
+
+What:		/sys/class/remoteproc/.../recovery
+Date:		July 2020
+Contact:	Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com>
+Description:	Remote processor recovery mechanism
+
+		Reports the recovery mechanism of the remote processor,
+		which will be one of:
+
+		"enabled"
+		"disabled"
+
+		"enabled" means, the remote processor will be automatically
+		recovered whenever it crashes. Moreover, if the remote
+		processor crashes while recovery is disabled, it will
+		be automatically recovered too as soon as recovery is enabled.
+
+		"disabled" means, a remote processor will remain in a crashed
+		state if it crashes. This is useful for debugging purposes;
+		without it, debugging a crash is substantially harder.
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 732770e..c505f0e 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -84,82 +84,6 @@  static const struct file_operations rproc_name_ops = {
 	.llseek	= generic_file_llseek,
 };
 
-/* expose recovery flag via debugfs */
-static ssize_t rproc_recovery_read(struct file *filp, char __user *userbuf,
-				   size_t count, loff_t *ppos)
-{
-	struct rproc *rproc = filp->private_data;
-	char *buf = rproc->recovery_disabled ? "disabled\n" : "enabled\n";
-
-	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
-}
-
-/*
- * By writing to the 'recovery' debugfs entry, we control the behavior of the
- * recovery mechanism dynamically. The default value of this entry is "enabled".
- *
- * The 'recovery' debugfs entry supports these commands:
- *
- * enabled:	When enabled, the remote processor will be automatically
- *		recovered whenever it crashes. Moreover, if the remote
- *		processor crashes while recovery is disabled, it will
- *		be automatically recovered too as soon as recovery is enabled.
- *
- * disabled:	When disabled, a remote processor will remain in a crashed
- *		state if it crashes. This is useful for debugging purposes;
- *		without it, debugging a crash is substantially harder.
- *
- * recover:	This function will trigger an immediate recovery if the
- *		remote processor is in a crashed state, without changing
- *		or checking the recovery state (enabled/disabled).
- *		This is useful during debugging sessions, when one expects
- *		additional crashes to happen after enabling recovery. In this
- *		case, enabling recovery will make it hard to debug subsequent
- *		crashes, so it's recommended to keep recovery disabled, and
- *		instead use the "recover" command as needed.
- */
-static ssize_t
-rproc_recovery_write(struct file *filp, const char __user *user_buf,
-		     size_t count, loff_t *ppos)
-{
-	struct rproc *rproc = filp->private_data;
-	char buf[10];
-	int ret;
-
-	if (count < 1 || count > sizeof(buf))
-		return -EINVAL;
-
-	ret = copy_from_user(buf, user_buf, count);
-	if (ret)
-		return -EFAULT;
-
-	/* remove end of line */
-	if (buf[count - 1] == '\n')
-		buf[count - 1] = '\0';
-
-	if (!strncmp(buf, "enabled", count)) {
-		/* change the flag and begin the recovery process if needed */
-		rproc->recovery_disabled = false;
-		rproc_trigger_recovery(rproc);
-	} else if (!strncmp(buf, "disabled", count)) {
-		rproc->recovery_disabled = true;
-	} else if (!strncmp(buf, "recover", count)) {
-		/* begin the recovery process without changing the flag */
-		rproc_trigger_recovery(rproc);
-	} else {
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations rproc_recovery_ops = {
-	.read = rproc_recovery_read,
-	.write = rproc_recovery_write,
-	.open = simple_open,
-	.llseek = generic_file_llseek,
-};
-
 /* expose the crash trigger via debugfs */
 static ssize_t
 rproc_crash_write(struct file *filp, const char __user *user_buf,
@@ -329,8 +253,6 @@  void rproc_create_debug_dir(struct rproc *rproc)
 
 	debugfs_create_file("name", 0400, rproc->dbg_dir,
 			    rproc, &rproc_name_ops);
-	debugfs_create_file("recovery", 0600, rproc->dbg_dir,
-			    rproc, &rproc_recovery_ops);
 	debugfs_create_file("crash", 0200, rproc->dbg_dir,
 			    rproc, &rproc_crash_ops);
 	debugfs_create_file("resource_table", 0400, rproc->dbg_dir,
diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
index 89b301a..45cae4f 100644
--- a/drivers/remoteproc/remoteproc_sysfs.c
+++ b/drivers/remoteproc/remoteproc_sysfs.c
@@ -11,6 +11,63 @@ 
 #define to_rproc(d) container_of(d, struct rproc, dev)
 
 #if IS_ENABLED(CONFIG_RPROC_SYSFS_CONFIGURATION_SUPPORT)
+
+/* expose recovery flag via sysfs */
+static ssize_t recovery_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct rproc *rproc = to_rproc(dev);
+
+	return sprintf(buf, "%s", rproc->recovery_disabled ? "disabled\n" : "enabled\n");
+}
+
+/*
+ * By writing to the 'recovery' sysfs entry, we control the behavior of the
+ * recovery mechanism dynamically. The default value of this entry is "enabled".
+ *
+ * The 'recovery' sysfs entry supports these commands:
+ *
+ * enabled:	When enabled, the remote processor will be automatically
+ *		recovered whenever it crashes. Moreover, if the remote
+ *		processor crashes while recovery is disabled, it will
+ *		be automatically recovered too as soon as recovery is enabled.
+ *
+ * disabled:	When disabled, a remote processor will remain in a crashed
+ *		state if it crashes. This is useful for debugging purposes;
+ *		without it, debugging a crash is substantially harder.
+ *
+ * recover:	This function will trigger an immediate recovery if the
+ *		remote processor is in a crashed state, without changing
+ *		or checking the recovery state (enabled/disabled).
+ *		This is useful during debugging sessions, when one expects
+ *		additional crashes to happen after enabling recovery. In this
+ *		case, enabling recovery will make it hard to debug subsequent
+ *		crashes, so it's recommended to keep recovery disabled, and
+ *		instead use the "recover" command as needed.
+ */
+static ssize_t recovery_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct rproc *rproc = to_rproc(dev);
+
+	if (sysfs_streq(buf, "enabled")) {
+		/* change the flag and begin the recovery process if needed */
+		rproc->recovery_disabled = false;
+		rproc_trigger_recovery(rproc);
+	} else if (sysfs_streq(buf, "disabled")) {
+		rproc->recovery_disabled = true;
+	} else if (sysfs_streq(buf, "recover")) {
+		/* begin the recovery process without changing the flag */
+		rproc_trigger_recovery(rproc);
+	} else {
+		return -EINVAL;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_RW(recovery);
+
 /*
  * A coredump-configuration-to-string lookup table, for exposing a
  * human readable configuration via sysfs. Always keep in sync with
@@ -205,6 +262,7 @@  static DEVICE_ATTR_RO(name);
 static struct attribute *rproc_attrs[] = {
 #if IS_ENABLED(CONFIG_RPROC_SYSFS_CONFIGURATION_SUPPORT)
 	&dev_attr_coredump.attr,
+	&dev_attr_recovery.attr,
 #endif
 	&dev_attr_firmware.attr,
 	&dev_attr_state.attr,