diff mbox series

[v7,3/3] remoteproc: Add recovery configuration to the sysfs interface

Message ID 1601662144-5964-4-git-send-email-rishabhb@codeaurora.org (mailing list archive)
State New
Headers show
Series Move recovery/coredump configuration to sysfs | expand

Commit Message

Rishabh Bhatnagar Oct. 2, 2020, 6:09 p.m. UTC
Add recovery configuration to the sysfs interface. This will
allow usage of this configuration feature in production
devices where access to debugfs might be limited.

Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 Documentation/ABI/testing/sysfs-class-remoteproc | 20 +++++++++
 drivers/remoteproc/remoteproc_sysfs.c            | 56 ++++++++++++++++++++++++
 2 files changed, 76 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
index 050bd25..066b9b6 100644
--- a/Documentation/ABI/testing/sysfs-class-remoteproc
+++ b/Documentation/ABI/testing/sysfs-class-remoteproc
@@ -82,3 +82,23 @@  Description:	Remote processor coredump configuration
 		processor's device memory. Extra buffer will not be used to
 		copy the dump. Also recovery process will not proceed until
 		all data is read by usersapce.
+
+What:		/sys/class/remoteproc/.../recovery
+Date:		July 2020
+Contact:	Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com>
+Description:	Remote processor recovery mechanism
+
+		Reports the recovery mechanism of the remote processor,
+		which will be one of:
+
+		"enabled"
+		"disabled"
+
+		"enabled" means, the remote processor will be automatically
+		recovered whenever it crashes. Moreover, if the remote
+		processor crashes while recovery is disabled, it will
+		be automatically recovered too as soon as recovery is enabled.
+
+		"disabled" means, a remote processor will remain in a crashed
+		state if it crashes. This is useful for debugging purposes;
+		without it, debugging a crash is substantially harder.
diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
index 8500271..d1cf7bf 100644
--- a/drivers/remoteproc/remoteproc_sysfs.c
+++ b/drivers/remoteproc/remoteproc_sysfs.c
@@ -10,6 +10,61 @@ 
 
 #define to_rproc(d) container_of(d, struct rproc, dev)
 
+static ssize_t recovery_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct rproc *rproc = to_rproc(dev);
+
+	return sprintf(buf, "%s", rproc->recovery_disabled ? "disabled\n" : "enabled\n");
+}
+
+/*
+ * By writing to the 'recovery' sysfs entry, we control the behavior of the
+ * recovery mechanism dynamically. The default value of this entry is "enabled".
+ *
+ * The 'recovery' sysfs entry supports these commands:
+ *
+ * enabled:	When enabled, the remote processor will be automatically
+ *		recovered whenever it crashes. Moreover, if the remote
+ *		processor crashes while recovery is disabled, it will
+ *		be automatically recovered too as soon as recovery is enabled.
+ *
+ * disabled:	When disabled, a remote processor will remain in a crashed
+ *		state if it crashes. This is useful for debugging purposes;
+ *		without it, debugging a crash is substantially harder.
+ *
+ * recover:	This function will trigger an immediate recovery if the
+ *		remote processor is in a crashed state, without changing
+ *		or checking the recovery state (enabled/disabled).
+ *		This is useful during debugging sessions, when one expects
+ *		additional crashes to happen after enabling recovery. In this
+ *		case, enabling recovery will make it hard to debug subsequent
+ *		crashes, so it's recommended to keep recovery disabled, and
+ *		instead use the "recover" command as needed.
+ */
+static ssize_t recovery_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct rproc *rproc = to_rproc(dev);
+
+	if (sysfs_streq(buf, "enabled")) {
+		/* change the flag and begin the recovery process if needed */
+		rproc->recovery_disabled = false;
+		rproc_trigger_recovery(rproc);
+	} else if (sysfs_streq(buf, "disabled")) {
+		rproc->recovery_disabled = true;
+	} else if (sysfs_streq(buf, "recover")) {
+		/* begin the recovery process without changing the flag */
+		rproc_trigger_recovery(rproc);
+	} else {
+		return -EINVAL;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_RW(recovery);
+
 /*
  * A coredump-configuration-to-string lookup table, for exposing a
  * human readable configuration via sysfs. Always keep in sync with
@@ -201,6 +256,7 @@  static DEVICE_ATTR_RO(name);
 
 static struct attribute *rproc_attrs[] = {
 	&dev_attr_coredump.attr,
+	&dev_attr_recovery.attr,
 	&dev_attr_firmware.attr,
 	&dev_attr_state.attr,
 	&dev_attr_name.attr,