@@ -7,7 +7,6 @@
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
@@ -651,15 +650,16 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
- <&rpmhpd 0>,
+ power-domains = <&rpmhpd 0>,
<&rpmhpd 12>;
- power-domain-names = "load_state", "cx", "mss";
+ power-domain-names = "cx", "mss";
interconnects = <&mc_virt 0 &mc_virt 1>;
memory-region = <&pil_modem_mem>;
+ qcom,qmp = <&aoss_qmp>;
+
qcom,smem-states = <&smp2p_modem_out 0>;
qcom,smem-state-names = "stop";
@@ -719,7 +719,6 @@
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
#clock-cells = <0>;
- #power-domain-cells = <1>;
};
spmi_bus: spmi@c440000 {
@@ -1018,13 +1017,14 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
- <&rpmhpd 4>,
+ power-domains = <&rpmhpd 4>,
<&rpmhpd 5>;
- power-domain-names = "load_state", "lcx", "lmx";
+ power-domain-names = "lcx", "lmx";
memory-region = <&pil_slpi_mem>;
+ qcom,qmp = <&aoss_qmp>;
+
qcom,smem-states = <&smp2p_slpi_out 0>;
qcom,smem-state-names = "stop";
@@ -1058,15 +1058,16 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
- <&rpmhpd 0>,
+ power-domains = <&rpmhpd 0>,
<&rpmhpd 10>;
- power-domain-names = "load_state", "cx", "mxc";
+ power-domain-names = "cx", "mxc";
interconnects = <&compute_noc 1 &mc_virt 1>;
memory-region = <&pil_cdsp_mem>;
+ qcom,qmp = <&aoss_qmp>;
+
qcom,smem-states = <&smp2p_cdsp_out 0>;
qcom,smem-state-names = "stop";
@@ -1292,13 +1293,14 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
- <&rpmhpd 4>,
+ power-domains = <&rpmhpd 4>,
<&rpmhpd 5>;
- power-domain-names = "load_state", "lcx", "lmx";
+ power-domain-names = "lcx", "lmx";
memory-region = <&pil_adsp_mem>;
+ qcom,qmp = <&aoss_qmp>;
+
qcom,smem-states = <&smp2p_adsp_out 0>;
qcom,smem-state-names = "stop";
Use the Qualcomm Mailbox Protocol (QMP) binding to control the load state resources on SM8350 SoCs and drop deprecated power-domains exposed by AOSS QMP node. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)