| Message ID | 1629344185-27368-11-git-send-email-sibis@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Modem support on SC7280 SoCs | expand |
Quoting Sibi Sankar (2021-08-18 20:36:25) > Update MSS node to support MSA based modem boot on SC7280 SoCs. > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org> > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org> > > v3: > * Place remoteproc_mpss node in alphabetical order above pinctrl > section. [Stephen] > > arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 7 +++++++ > arch/arm64/boot/dts/qcom/sc7280.dtsi | 19 ++++++++++++++++--- > 2 files changed, 23 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > index 103d89c1e1c7..f1c8641b0c26 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > @@ -263,6 +263,13 @@ > status = "okay"; > }; > > +&remoteproc_mpss { > + status = "okay"; > + compatible = "qcom,sc7280-mss-pil"; > + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; > + memory-region = <&mba_mem &mpss_mem>; Nitpick: memory-region = <&mba_mem>, <&mpss_mem>; would be better as it indicates that &mpss_mem isn't being parsed when &mba_mem is being parsed, i.e. they're independent phandles. > +}; > + > &sdhc_1 { > status = "okay"; >
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 103d89c1e1c7..f1c8641b0c26 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -263,6 +263,13 @@ status = "okay"; }; +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + memory-region = <&mba_mem &mpss_mem>; +}; + &sdhc_1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 93ae3ee8c5a6..7ad0cbe1a0a2 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -701,7 +701,8 @@ remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7280-mpss-pas"; - reg = <0 0x04080000 0 0x10000>; + reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, @@ -712,8 +713,11 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "xo"; power-domains = <&rpmhpd SC7280_CX>, <&rpmhpd SC7280_MSS>; @@ -726,6 +730,15 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; + qcom,ext-regs = <&tcsr_regs 0x10000 0x10004 + &tcsr_mutex 0x26004 0x26008>; + qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + status = "disabled"; glink-edge {
Update MSS node to support MSA based modem boot on SC7280 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> --- v3: * Place remoteproc_mpss node in alphabetical order above pinctrl section. [Stephen] arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 7 +++++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 19 ++++++++++++++++--- 2 files changed, 23 insertions(+), 3 deletions(-)