@@ -8,7 +8,6 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
@@ -726,15 +725,16 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
- <&rpmhpd 0>,
+ power-domains = <&rpmhpd 0>,
<&rpmhpd 12>;
- power-domain-names = "load_state", "cx", "mss";
+ power-domain-names = "cx", "mss";
interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
memory-region = <&pil_modem_mem>;
+ qcom,qmp = <&aoss_qmp>;
+
qcom,smem-states = <&smp2p_modem_out 0>;
qcom,smem-state-names = "stop";
@@ -794,7 +794,6 @@
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
#clock-cells = <0>;
- #power-domain-cells = <1>;
};
spmi_bus: spmi@c440000 {
@@ -1107,13 +1106,14 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
- <&rpmhpd 4>,
+ power-domains = <&rpmhpd 4>,
<&rpmhpd 5>;
- power-domain-names = "load_state", "lcx", "lmx";
+ power-domain-names = "lcx", "lmx";
memory-region = <&pil_slpi_mem>;
+ qcom,qmp = <&aoss_qmp>;
+
qcom,smem-states = <&smp2p_slpi_out 0>;
qcom,smem-state-names = "stop";
@@ -1147,15 +1147,16 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
- <&rpmhpd 0>,
+ power-domains = <&rpmhpd 0>,
<&rpmhpd 10>;
- power-domain-names = "load_state", "cx", "mxc";
+ power-domain-names = "cx", "mxc";
interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
memory-region = <&pil_cdsp_mem>;
+ qcom,qmp = <&aoss_qmp>;
+
qcom,smem-states = <&smp2p_cdsp_out 0>;
qcom,smem-state-names = "stop";
@@ -1381,13 +1382,14 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
- <&rpmhpd 4>,
+ power-domains = <&rpmhpd 4>,
<&rpmhpd 5>;
- power-domain-names = "load_state", "lcx", "lmx";
+ power-domain-names = "lcx", "lmx";
memory-region = <&pil_adsp_mem>;
+ qcom,qmp = <&aoss_qmp>;
+
qcom,smem-states = <&smp2p_adsp_out 0>;
qcom,smem-state-names = "stop";