diff mbox series

[v7,01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain

Message ID 1631800770-371-2-git-send-email-sibis@codeaurora.org (mailing list archive)
State Not Applicable
Headers show
Series Use qmp_send to update co-processor load state | expand

Commit Message

Sibi Sankar Sept. 16, 2021, 1:59 p.m. UTC
The power-domains exposed by AOSS QMP node are used to notify the Always
on Subsystem (AOSS) that a particular co-processor is up/down. These
co-processors enter low-power modes independent to that of the application
processor and their states are expected to remain unaltered across system
suspend/resume cycles. To achieve this behavior let's drop the load
power-domain and replace them with generic qmp_send interface instead.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

Comments

Bjorn Andersson Sept. 27, 2021, 8:53 p.m. UTC | #1
On Thu, 16 Sep 2021 19:29:18 +0530, Sibi Sankar wrote:
> The power-domains exposed by AOSS QMP node are used to notify the Always
> on Subsystem (AOSS) that a particular co-processor is up/down. These
> co-processors enter low-power modes independent to that of the application
> processor and their states are expected to remain unaltered across system
> suspend/resume cycles. To achieve this behavior let's drop the load
> power-domain and replace them with generic qmp_send interface instead.
> 
> [...]

Applied, thanks!

[01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain
        commit: a4fe5159038f22604e9ef3a8c38b680db4456138

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
index 1904612fad85..e2e173dfada7 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -19,8 +19,7 @@  description:
 
   The AOSS side channel exposes control over a set of resources, used to control
   a set of debug related clocks and to affect the low power state of resources
-  related to the secondary subsystems. These resources are exposed as a set of
-  power-domains.
+  related to the secondary subsystems.
 
 properties:
   compatible:
@@ -58,13 +57,6 @@  properties:
     description:
       The single clock represents the QDSS clock.
 
-  "#power-domain-cells":
-    const: 1
-    description: |
-        The provided power-domains are:
-        CDSP state (0), LPASS state (1), modem state (2), SLPI
-        state (3), SPSS state (4) and Venus state (5).
-
 required:
   - compatible
   - reg
@@ -102,7 +94,6 @@  examples:
       mboxes = <&apss_shared 0>;
 
       #clock-cells = <0>;
-      #power-domain-cells = <1>;
 
       cx_cdev: cx {
         #cooling-cells = <2>;