diff mbox series

[v5,3/8] remoteproc: Use u64 type for boot_addr

Message ID 20200302093902.27849-4-cleger@kalray.eu (mailing list archive)
State New, archived
Headers show
Series [v5,1/8] remoteproc: Use size_t type for len in da_to_va | expand

Commit Message

Clément Leger March 2, 2020, 9:38 a.m. UTC
elf64 entry is defined as a u64. Since boot_addr is used to store the
elf entry point, change boot_addr type to u64 to support both elf32
and elf64. In the same time, fix users that were using this variable.

Signed-off-by: Clement Leger <cleger@kalray.eu>
---
 drivers/remoteproc/remoteproc_elf_loader.c | 2 +-
 drivers/remoteproc/remoteproc_internal.h   | 2 +-
 drivers/remoteproc/st_remoteproc.c         | 2 +-
 include/linux/remoteproc.h                 | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

Comments

Bjorn Andersson March 2, 2020, 11:08 p.m. UTC | #1
On Mon 02 Mar 01:38 PST 2020, Clement Leger wrote:

> elf64 entry is defined as a u64. Since boot_addr is used to store the
> elf entry point, change boot_addr type to u64 to support both elf32
> and elf64. In the same time, fix users that were using this variable.
> 
> Signed-off-by: Clement Leger <cleger@kalray.eu>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/remoteproc/remoteproc_elf_loader.c | 2 +-
>  drivers/remoteproc/remoteproc_internal.h   | 2 +-
>  drivers/remoteproc/st_remoteproc.c         | 2 +-
>  include/linux/remoteproc.h                 | 4 ++--
>  4 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
> index 606aae166eba..c2a9783cfb9a 100644
> --- a/drivers/remoteproc/remoteproc_elf_loader.c
> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
> @@ -102,7 +102,7 @@ EXPORT_SYMBOL(rproc_elf_sanity_check);
>   * Note that the boot address is not a configurable property of all remote
>   * processors. Some will always boot at a specific hard-coded address.
>   */
> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
>  {
>  	struct elf32_hdr *ehdr  = (struct elf32_hdr *)fw->data;
>  
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 58580210575c..0deae5f237b8 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -55,7 +55,7 @@ phys_addr_t rproc_va_to_pa(void *cpu_addr);
>  int rproc_trigger_recovery(struct rproc *rproc);
>  
>  int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
>  int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
>  int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
>  struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
> diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
> index ee13d23b43a9..a3268d95a50e 100644
> --- a/drivers/remoteproc/st_remoteproc.c
> +++ b/drivers/remoteproc/st_remoteproc.c
> @@ -190,7 +190,7 @@ static int st_rproc_start(struct rproc *rproc)
>  		}
>  	}
>  
> -	dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
> +	dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr);
>  
>  	return 0;
>  
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index bee559330204..1683d6c386a6 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -382,7 +382,7 @@ struct rproc_ops {
>  				struct rproc *rproc, const struct firmware *fw);
>  	int (*load)(struct rproc *rproc, const struct firmware *fw);
>  	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
> -	u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> +	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
>  };
>  
>  /**
> @@ -498,7 +498,7 @@ struct rproc {
>  	int num_traces;
>  	struct list_head carveouts;
>  	struct list_head mappings;
> -	u32 bootaddr;
> +	u64 bootaddr;
>  	struct list_head rvdevs;
>  	struct list_head subdevs;
>  	struct idr notifyids;
> -- 
> 2.15.0.276.g89ea799
>
Mathieu Poirier March 9, 2020, 7:52 p.m. UTC | #2
On Mon, Mar 02, 2020 at 10:38:57AM +0100, Clement Leger wrote:
> elf64 entry is defined as a u64. Since boot_addr is used to store the
> elf entry point, change boot_addr type to u64 to support both elf32
> and elf64. In the same time, fix users that were using this variable.
> 
> Signed-off-by: Clement Leger <cleger@kalray.eu>
> ---
>  drivers/remoteproc/remoteproc_elf_loader.c | 2 +-
>  drivers/remoteproc/remoteproc_internal.h   | 2 +-
>  drivers/remoteproc/st_remoteproc.c         | 2 +-
>  include/linux/remoteproc.h                 | 4 ++--
>  4 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
> index 606aae166eba..c2a9783cfb9a 100644
> --- a/drivers/remoteproc/remoteproc_elf_loader.c
> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
> @@ -102,7 +102,7 @@ EXPORT_SYMBOL(rproc_elf_sanity_check);
>   * Note that the boot address is not a configurable property of all remote
>   * processors. Some will always boot at a specific hard-coded address.
>   */
> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
>  {
>  	struct elf32_hdr *ehdr  = (struct elf32_hdr *)fw->data;
>  
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 58580210575c..0deae5f237b8 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -55,7 +55,7 @@ phys_addr_t rproc_va_to_pa(void *cpu_addr);
>  int rproc_trigger_recovery(struct rproc *rproc);
>  
>  int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
>  int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
>  int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
>  struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,

The return type of function rproc_get_boot_addr() should also be changed from
u32 to u64.  Or perhaps this is intentional to make sure rproc->bootaddr never
occupies more than 32bit?

> diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
> index ee13d23b43a9..a3268d95a50e 100644
> --- a/drivers/remoteproc/st_remoteproc.c
> +++ b/drivers/remoteproc/st_remoteproc.c
> @@ -190,7 +190,7 @@ static int st_rproc_start(struct rproc *rproc)
>  		}
>  	}
>  
> -	dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
> +	dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr);
>  
>  	return 0;
>  
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index bee559330204..1683d6c386a6 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -382,7 +382,7 @@ struct rproc_ops {
>  				struct rproc *rproc, const struct firmware *fw);
>  	int (*load)(struct rproc *rproc, const struct firmware *fw);
>  	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
> -	u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> +	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
>  };
>  
>  /**
> @@ -498,7 +498,7 @@ struct rproc {
>  	int num_traces;
>  	struct list_head carveouts;
>  	struct list_head mappings;
> -	u32 bootaddr;
> +	u64 bootaddr;
>  	struct list_head rvdevs;
>  	struct list_head subdevs;
>  	struct idr notifyids;
> -- 
> 2.15.0.276.g89ea799
>
Clément Leger March 10, 2020, 7:59 a.m. UTC | #3
----- On 9 Mar, 2020, at 20:52, Mathieu Poirier mathieu.poirier@linaro.org wrote:

> On Mon, Mar 02, 2020 at 10:38:57AM +0100, Clement Leger wrote:
>> elf64 entry is defined as a u64. Since boot_addr is used to store the
>> elf entry point, change boot_addr type to u64 to support both elf32
>> and elf64. In the same time, fix users that were using this variable.
>> 
>> Signed-off-by: Clement Leger <cleger@kalray.eu>
>> ---
>>  drivers/remoteproc/remoteproc_elf_loader.c | 2 +-
>>  drivers/remoteproc/remoteproc_internal.h   | 2 +-
>>  drivers/remoteproc/st_remoteproc.c         | 2 +-
>>  include/linux/remoteproc.h                 | 4 ++--
>>  4 files changed, 5 insertions(+), 5 deletions(-)
>> 
>> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c
>> b/drivers/remoteproc/remoteproc_elf_loader.c
>> index 606aae166eba..c2a9783cfb9a 100644
>> --- a/drivers/remoteproc/remoteproc_elf_loader.c
>> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
>> @@ -102,7 +102,7 @@ EXPORT_SYMBOL(rproc_elf_sanity_check);
>>   * Note that the boot address is not a configurable property of all remote
>>   * processors. Some will always boot at a specific hard-coded address.
>>   */
>> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
>> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
>>  {
>>  	struct elf32_hdr *ehdr  = (struct elf32_hdr *)fw->data;
>>  
>> diff --git a/drivers/remoteproc/remoteproc_internal.h
>> b/drivers/remoteproc/remoteproc_internal.h
>> index 58580210575c..0deae5f237b8 100644
>> --- a/drivers/remoteproc/remoteproc_internal.h
>> +++ b/drivers/remoteproc/remoteproc_internal.h
>> @@ -55,7 +55,7 @@ phys_addr_t rproc_va_to_pa(void *cpu_addr);
>>  int rproc_trigger_recovery(struct rproc *rproc);
>>  
>>  int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
>> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
>> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
>>  int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
>>  int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
>>  struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
> 
> The return type of function rproc_get_boot_addr() should also be changed from
> u32 to u64.  Or perhaps this is intentional to make sure rproc->bootaddr never
> occupies more than 32bit?

No, this is a mistake clearly. I haven't been able to test with a 64 bit
boot address since our remote processors always boot in the 32 bits
space. But since the elf64 boot address is on 64 bitsn this was a logical
modification. I will fix that.

> 
>> diff --git a/drivers/remoteproc/st_remoteproc.c
>> b/drivers/remoteproc/st_remoteproc.c
>> index ee13d23b43a9..a3268d95a50e 100644
>> --- a/drivers/remoteproc/st_remoteproc.c
>> +++ b/drivers/remoteproc/st_remoteproc.c
>> @@ -190,7 +190,7 @@ static int st_rproc_start(struct rproc *rproc)
>>  		}
>>  	}
>>  
>> -	dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
>> +	dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr);
>>  
>>  	return 0;
>>  
>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>> index bee559330204..1683d6c386a6 100644
>> --- a/include/linux/remoteproc.h
>> +++ b/include/linux/remoteproc.h
>> @@ -382,7 +382,7 @@ struct rproc_ops {
>>  				struct rproc *rproc, const struct firmware *fw);
>>  	int (*load)(struct rproc *rproc, const struct firmware *fw);
>>  	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
>> -	u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
>> +	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
>>  };
>>  
>>  /**
>> @@ -498,7 +498,7 @@ struct rproc {
>>  	int num_traces;
>>  	struct list_head carveouts;
>>  	struct list_head mappings;
>> -	u32 bootaddr;
>> +	u64 bootaddr;
>>  	struct list_head rvdevs;
>>  	struct list_head subdevs;
>>  	struct idr notifyids;
>> --
>> 2.15.0.276.g89ea799
Bjorn Andersson March 10, 2020, 7:32 p.m. UTC | #4
On Tue 10 Mar 00:59 PDT 2020, Cl?ment Leger wrote:

> 
> 
> ----- On 9 Mar, 2020, at 20:52, Mathieu Poirier mathieu.poirier@linaro.org wrote:
> 
> > On Mon, Mar 02, 2020 at 10:38:57AM +0100, Clement Leger wrote:
> >> elf64 entry is defined as a u64. Since boot_addr is used to store the
> >> elf entry point, change boot_addr type to u64 to support both elf32
> >> and elf64. In the same time, fix users that were using this variable.
> >> 
> >> Signed-off-by: Clement Leger <cleger@kalray.eu>
> >> ---
> >>  drivers/remoteproc/remoteproc_elf_loader.c | 2 +-
> >>  drivers/remoteproc/remoteproc_internal.h   | 2 +-
> >>  drivers/remoteproc/st_remoteproc.c         | 2 +-
> >>  include/linux/remoteproc.h                 | 4 ++--
> >>  4 files changed, 5 insertions(+), 5 deletions(-)
> >> 
> >> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c
> >> b/drivers/remoteproc/remoteproc_elf_loader.c
> >> index 606aae166eba..c2a9783cfb9a 100644
> >> --- a/drivers/remoteproc/remoteproc_elf_loader.c
> >> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
> >> @@ -102,7 +102,7 @@ EXPORT_SYMBOL(rproc_elf_sanity_check);
> >>   * Note that the boot address is not a configurable property of all remote
> >>   * processors. Some will always boot at a specific hard-coded address.
> >>   */
> >> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
> >> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
> >>  {
> >>  	struct elf32_hdr *ehdr  = (struct elf32_hdr *)fw->data;
> >>  
> >> diff --git a/drivers/remoteproc/remoteproc_internal.h
> >> b/drivers/remoteproc/remoteproc_internal.h
> >> index 58580210575c..0deae5f237b8 100644
> >> --- a/drivers/remoteproc/remoteproc_internal.h
> >> +++ b/drivers/remoteproc/remoteproc_internal.h
> >> @@ -55,7 +55,7 @@ phys_addr_t rproc_va_to_pa(void *cpu_addr);
> >>  int rproc_trigger_recovery(struct rproc *rproc);
> >>  
> >>  int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
> >> -u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
> >> +u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
> >>  int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
> >>  int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
> >>  struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
> > 
> > The return type of function rproc_get_boot_addr() should also be changed from
> > u32 to u64.  Or perhaps this is intentional to make sure rproc->bootaddr never
> > occupies more than 32bit?
> 
> No, this is a mistake clearly. I haven't been able to test with a 64 bit
> boot address since our remote processors always boot in the 32 bits
> space. But since the elf64 boot address is on 64 bitsn this was a logical
> modification. I will fix that.
> 

Sorry, I forgot to reply to this one. I fixed it up while applying the
patch.

Thanks,
Bjorn

> > 
> >> diff --git a/drivers/remoteproc/st_remoteproc.c
> >> b/drivers/remoteproc/st_remoteproc.c
> >> index ee13d23b43a9..a3268d95a50e 100644
> >> --- a/drivers/remoteproc/st_remoteproc.c
> >> +++ b/drivers/remoteproc/st_remoteproc.c
> >> @@ -190,7 +190,7 @@ static int st_rproc_start(struct rproc *rproc)
> >>  		}
> >>  	}
> >>  
> >> -	dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
> >> +	dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr);
> >>  
> >>  	return 0;
> >>  
> >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> >> index bee559330204..1683d6c386a6 100644
> >> --- a/include/linux/remoteproc.h
> >> +++ b/include/linux/remoteproc.h
> >> @@ -382,7 +382,7 @@ struct rproc_ops {
> >>  				struct rproc *rproc, const struct firmware *fw);
> >>  	int (*load)(struct rproc *rproc, const struct firmware *fw);
> >>  	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
> >> -	u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> >> +	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> >>  };
> >>  
> >>  /**
> >> @@ -498,7 +498,7 @@ struct rproc {
> >>  	int num_traces;
> >>  	struct list_head carveouts;
> >>  	struct list_head mappings;
> >> -	u32 bootaddr;
> >> +	u64 bootaddr;
> >>  	struct list_head rvdevs;
> >>  	struct list_head subdevs;
> >>  	struct idr notifyids;
> >> --
> >> 2.15.0.276.g89ea799
diff mbox series

Patch

diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index 606aae166eba..c2a9783cfb9a 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -102,7 +102,7 @@  EXPORT_SYMBOL(rproc_elf_sanity_check);
  * Note that the boot address is not a configurable property of all remote
  * processors. Some will always boot at a specific hard-coded address.
  */
-u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
+u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
 {
 	struct elf32_hdr *ehdr  = (struct elf32_hdr *)fw->data;
 
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 58580210575c..0deae5f237b8 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -55,7 +55,7 @@  phys_addr_t rproc_va_to_pa(void *cpu_addr);
 int rproc_trigger_recovery(struct rproc *rproc);
 
 int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
-u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
+u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
 int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
 int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
 struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
index ee13d23b43a9..a3268d95a50e 100644
--- a/drivers/remoteproc/st_remoteproc.c
+++ b/drivers/remoteproc/st_remoteproc.c
@@ -190,7 +190,7 @@  static int st_rproc_start(struct rproc *rproc)
 		}
 	}
 
-	dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
+	dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr);
 
 	return 0;
 
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index bee559330204..1683d6c386a6 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -382,7 +382,7 @@  struct rproc_ops {
 				struct rproc *rproc, const struct firmware *fw);
 	int (*load)(struct rproc *rproc, const struct firmware *fw);
 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
-	u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
+	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
 };
 
 /**
@@ -498,7 +498,7 @@  struct rproc {
 	int num_traces;
 	struct list_head carveouts;
 	struct list_head mappings;
-	u32 bootaddr;
+	u64 bootaddr;
 	struct list_head rvdevs;
 	struct list_head subdevs;
 	struct idr notifyids;