@@ -249,6 +249,16 @@ config STM32_RPROC
This can be either built-in or a loadable module.
+config ZYNQMP_R5_REMOTEPROC
+ tristate "ZynqMP_R5 remoteproc support"
+ depends on ARM64 && PM && ARCH_ZYNQMP
+ select RPMSG_VIRTIO
+ select MAILBOX
+ select ZYNQMP_IPI_MBOX
+ help
+ Say y or m here to support ZynqMP R5 remote processors via the remote
+ processor framework.
+
endif # REMOTEPROC
endmenu
@@ -28,5 +28,6 @@ obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss_pil.o
qcom_wcnss_pil-y += qcom_wcnss.o
qcom_wcnss_pil-y += qcom_wcnss_iris.o
obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
+obj-$(CONFIG_ZYNQMP_R5_REMOTEPROC) += zynqmp_r5_remoteproc.o
obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o
new file mode 100644
@@ -0,0 +1,898 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq R5 Remote Processor driver
+ *
+ * Based on origin OMAP and Zynq Remote Processor driver
+ *
+ */
+
+#include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox/zynqmp-ipi-message.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/remoteproc.h>
+#include <linux/skbuff.h>
+#include <linux/sysfs.h>
+
+#include "remoteproc_internal.h"
+
+#define MAX_RPROCS 2 /* Support up to 2 RPU */
+#define MAX_MEM_PNODES 4 /* Max power nodes for one RPU memory instance */
+
+#define DEFAULT_FIRMWARE_NAME "rproc-rpu-fw"
+#define BANK_LIST_PROP "meta-memory-regions"
+
+/* PM proc states */
+#define PM_PROC_STATE_ACTIVE 1U
+
+/* IPI buffer MAX length */
+#define IPI_BUF_LEN_MAX 32U
+/* RX mailbox client buffer max length */
+#define RX_MBOX_CLIENT_BUF_MAX (IPI_BUF_LEN_MAX + \
+ sizeof(struct zynqmp_ipi_message))
+
+/**
+ * struct zynqmp_r5_mem - zynqmp rpu memory data
+ * @pnode_id: TCM power domain ids
+ * @res: memory resource
+ * @node: list node
+ */
+struct zynqmp_r5_mem {
+ u32 pnode_id[MAX_MEM_PNODES];
+ struct resource res;
+ struct list_head node;
+};
+
+/**
+ * struct zynqmp_r5_pdata - zynqmp rpu remote processor private data
+ * @dev: device of RPU instance
+ * @rproc: rproc handle
+ * @pnode_id: RPU CPU power domain id
+ * @is_r5_mode_set: indicate if r5 operation mode is set
+ * @tx_mc: tx mailbox client
+ * @rx_mc: rx mailbox client
+ * @tx_chan: tx mailbox channel
+ * @rx_chan: rx mailbox channel
+ * @mbox_work: mbox_work for the RPU remoteproc
+ * @tx_mc_skbs: socket buffers for tx mailbox client
+ * @rx_mc_buf: rx mailbox client buffer to save the rx message
+ */
+struct zynqmp_r5_pdata {
+ unsigned char rx_mc_buf[RX_MBOX_CLIENT_BUF_MAX];
+ struct mbox_client tx_mc;
+ struct mbox_client rx_mc;
+ struct work_struct mbox_work;
+ struct sk_buff_head tx_mc_skbs;
+ struct device dev;
+ struct rproc *rproc;
+ struct mbox_chan *tx_chan;
+ struct mbox_chan *rx_chan;
+ u32 pnode_id;
+ bool is_r5_mode_set;
+};
+
+/**
+ * table of RPUs
+ */
+struct zynqmp_r5_pdata rpus[MAX_RPROCS];
+/**
+ * RPU core configuration
+ */
+enum rpu_oper_mode rpu_mode;
+
+/*
+ * r5_set_mode - set RPU operation mode
+ * @pdata: Remote processor private data
+ *
+ * set RPU oepration mode
+ *
+ * Return: 0 for success, negative value for failure
+ */
+static int r5_set_mode(struct zynqmp_r5_pdata *pdata)
+{
+ struct device *dev = &pdata->dev;
+ enum rpu_tcm_comb cur_tcm_mode;
+ enum rpu_oper_mode cur_rpu_mode;
+ int ret;
+
+ cur_rpu_mode = rpu_mode;
+ ret = zynqmp_pm_get_rpu_mode(pdata->pnode_id, &cur_rpu_mode);
+ if (ret < 0) {
+ dev_err(dev, "failed to get RPU oper mode.\n");
+ return ret;
+ }
+ if (rpu_mode == cur_rpu_mode) {
+ dev_dbg(dev, "RPU mode matches: %x\n", rpu_mode);
+ } else {
+ ret = zynqmp_pm_set_rpu_mode(pdata->pnode_id,
+ (u32)cur_rpu_mode);
+ if (ret < 0) {
+ dev_err(dev,
+ "failed to set RPU oper mode.\n");
+ return ret;
+ }
+ }
+
+ cur_tcm_mode = (cur_rpu_mode == PM_RPU_MODE_LOCKSTEP) ?
+ PM_RPU_TCM_COMB : PM_RPU_TCM_SPLIT;
+ ret = zynqmp_pm_set_tcm_config(pdata->pnode_id, (u32)cur_tcm_mode);
+ if (ret < 0) {
+ dev_err(dev, "failed to config TCM to %x.\n",
+ cur_rpu_mode);
+ return ret;
+ }
+ pdata->is_r5_mode_set = true;
+ return 0;
+}
+
+/*
+ * ZynqMP R5 remoteproc memory release function
+ */
+static int tcm_mem_release(struct rproc *rproc, struct rproc_mem_entry *mem)
+{
+ u32 pnode_id;
+ int ret;
+ struct device *dev = &rproc->dev;
+
+ pnode_id = *(u32 *)mem->priv;
+
+ if (pnode_id <= 0)
+ dev_err(dev, "rproc_mem_entry has null priv field\n");
+
+ iounmap(mem->va);
+
+ ret = zynqmp_pm_release_node(pnode_id);
+ if (ret < 0)
+ dev_err(dev, "failed to release power node: %u\n", pnode_id);
+
+ return ret;
+}
+
+/*
+ * ZynqMP R5 remoteproc operations
+ */
+static int zynqmp_r5_rproc_start(struct rproc *rproc)
+{
+ struct device *dev = rproc->dev.parent;
+ struct zynqmp_r5_pdata *pdata = rproc->priv;
+ enum rpu_boot_mem bootmem;
+ int ret;
+
+ if ((rproc->bootaddr & 0xF0000000) == 0xF0000000)
+ bootmem = PM_RPU_BOOTMEM_HIVEC;
+ else
+ bootmem = PM_RPU_BOOTMEM_LOVEC;
+ dev_dbg(dev, "RPU boot from %s.",
+ bootmem == PM_RPU_BOOTMEM_HIVEC ? "OCM" : "TCM");
+ ret = zynqmp_pm_request_wake(pdata->pnode_id, 1,
+ bootmem, ZYNQMP_PM_REQUEST_ACK_NO);
+ if (ret < 0) {
+ dev_err(dev, "failed to boot R5.\n");
+ return ret;
+ }
+ return 0;
+}
+
+static int zynqmp_r5_rproc_stop(struct rproc *rproc)
+{
+ struct zynqmp_r5_pdata *pdata = rproc->priv;
+ int ret;
+
+ ret = zynqmp_pm_force_pwrdwn(pdata->pnode_id,
+ ZYNQMP_PM_REQUEST_ACK_BLOCKING);
+ if (ret < 0) {
+ dev_err(&pdata->dev, "failed to shutdown R5.\n");
+ return ret;
+ }
+ return 0;
+}
+
+static int zynqmp_r5_rproc_mem_alloc(struct rproc *rproc,
+ struct rproc_mem_entry *mem)
+{
+ struct device *dev = rproc->dev.parent;
+ void *va;
+
+ dev_dbg(rproc->dev.parent, "map memory: %pa\n", &mem->dma);
+ va = ioremap_wc(mem->dma, mem->len);
+ if (IS_ERR_OR_NULL(va)) {
+ dev_err(dev, "Unable to map memory region: %pa+%lx\n",
+ &mem->dma, mem->len);
+ return -ENOMEM;
+ }
+
+ /* Update memory entry va */
+ mem->va = va;
+
+ return 0;
+}
+
+static int zynqmp_r5_rproc_mem_release(struct rproc *rproc,
+ struct rproc_mem_entry *mem)
+{
+ dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
+ iounmap(mem->va);
+
+ return 0;
+}
+
+static int parse_mem_regions(struct rproc *rproc)
+{
+ int num_mems, i;
+ struct zynqmp_r5_pdata *pdata = rproc->priv;
+ struct device *dev = &pdata->dev;
+ struct device_node *np = dev->of_node;
+ struct rproc_mem_entry *mem;
+
+ num_mems = of_count_phandle_with_args(np, "memory-region", NULL);
+ if (num_mems <= 0)
+ return 0;
+ for (i = 0; i < num_mems; i++) {
+ struct device_node *node;
+ struct reserved_mem *rmem;
+
+ node = of_parse_phandle(np, "memory-region", i);
+ if (!node) {
+ dev_err(dev, "no memory-region specified\n");
+ return -EINVAL;
+ }
+
+ rmem = of_reserved_mem_lookup(node);
+ if (!rmem) {
+ dev_err(dev, "unable to acquire memory-region\n");
+ return -EINVAL;
+ }
+
+ if (strstr(node->name, "vdev0vring")) {
+ int vring_id;
+ char name[16];
+
+ /*
+ * expecting form of "rpuXvdev0vringX as documented
+ * in xilinx remoteproc device tree binding
+ */
+ if (strlen(node->name) < 14) {
+ dev_err(dev, "%pOF is less than 14 chars",
+ node);
+ return -EINVAL;
+ }
+
+ /*
+ * can be 1 of multiple vring IDs per IPC channel
+ * e.g. 'vdev0vring0' and 'vdev0vring1'
+ */
+ vring_id = node->name[14] - '0';
+ snprintf(name, sizeof(name), "vdev0vring%d", vring_id);
+ /* Register vring */
+ mem = rproc_mem_entry_init(dev, NULL,
+ (dma_addr_t)rmem->base,
+ rmem->size, rmem->base,
+ zynqmp_r5_rproc_mem_alloc,
+ zynqmp_r5_rproc_mem_release,
+ name);
+ dev_dbg(dev, "parsed %s at %llx\n", mem->name,
+ mem->dma);
+ } else {
+ /* Register DMA region */
+ int (*alloc)(struct rproc *r,
+ struct rproc_mem_entry *rme);
+ int (*release)(struct rproc *r,
+ struct rproc_mem_entry *rme);
+ char name[20];
+
+ if (strstr(node->name, "vdev0buffer")) {
+ alloc = NULL;
+ release = NULL;
+ strcpy(name, "vdev0buffer");
+ } else {
+ alloc = zynqmp_r5_rproc_mem_alloc;
+ release = zynqmp_r5_rproc_mem_release;
+ strcpy(name, node->name);
+ }
+
+ mem = rproc_mem_entry_init(dev, NULL,
+ (dma_addr_t)rmem->base,
+ rmem->size, rmem->base,
+ alloc, release, name);
+ if (!mem) {
+ dev_err(dev,
+ "unable to init memory-region %pOF\n",
+ node);
+ return -ENOMEM;
+ }
+ dev_dbg(dev, "parsed %s at %llx\n", mem->name,
+ mem->dma);
+ }
+ rproc_add_carveout(rproc, mem);
+ }
+
+ return 0;
+}
+
+/* call Xilix Platform manager to request access to TCM bank */
+static int zyqmp_r5_pm_request_tcm(struct device_node *tcm_node,
+ struct device *dev,
+ u32 *pnode_id)
+{
+ int ret;
+
+ ret = of_property_read_u32(tcm_node, "pnode-id", pnode_id);
+ if (ret) {
+ dev_err(dev, "Can't parse pnode-id property\n");
+ return ret;
+ }
+
+ ret = zynqmp_pm_request_node(*pnode_id, ZYNQMP_PM_CAPABILITY_ACCESS, 0,
+ ZYNQMP_PM_REQUEST_ACK_BLOCKING);
+ if (ret < 0) {
+ dev_err(dev, "failed to request power node: %u\n", *pnode_id);
+ return ret;
+ }
+
+ return 0;
+}
+
+/* Given tcm bank entry,
+ * this callback will set device address for R5 running on TCM
+ * and also setup virtual address for tcm bank remoteproc carveout
+ */
+static int tcm_mem_alloc(struct rproc *rproc,
+ struct rproc_mem_entry *mem)
+{
+ void *va;
+ struct device *dev = rproc->dev.parent;
+
+ dev_dbg(rproc->dev.parent, "map memory: %pa\n", &mem->dma);
+ va = ioremap_wc(mem->dma, mem->len);
+ if (IS_ERR_OR_NULL(va)) {
+ dev_err(dev, "Unable to map memory region: %pa+%lx\n",
+ &mem->dma, mem->len);
+ return -ENOMEM;
+ }
+
+ /* Update memory entry va */
+ mem->va = va;
+
+ va = devm_ioremap_wc(dev, mem->da, mem->len);
+ if (!va)
+ return -ENOMEM;
+ /* As R5 is 32 bit, wipe out extra high bits */
+ mem->da &= 0x000fffff;
+ /*
+ * handle tcm banks 1 a and b (0xffe90000 and oxffeb0000)
+ * As both of these the only common bit found not in tcm bank0 a or b
+ * is at 0x80000 use this mask to suss it out
+ */
+ if (mem->da & 0x80000)
+ /*
+ * similar to wiping tcm banks 0a and 0b with just the
+ * mask of 0x000fffff will translate to device addr's
+ * at 0x0 and 0x20000, need to do more to further translate
+ * tcm banks 1a and 1b at 0xffe90000 and oxffeb0000
+ * respectively to 0x0 and 0x20000
+ */
+ mem->da -= 0x90000;
+
+ return 0;
+}
+
+/*
+ * Given R5 node in remoteproc instance,
+ * allocate remoteproc carveout for TCM memory
+ * needed for firmware to be loaded
+ */
+static int parse_tcm_banks(struct rproc *rproc)
+{
+ int i, num_banks;
+
+ struct zynqmp_r5_pdata *pdata = rproc->priv;
+ struct device *dev = &pdata->dev;
+ struct device_node *r5_node = dev->of_node;
+
+ /* go through tcm banks for r5 node */
+ num_banks = of_count_phandle_with_args(r5_node, BANK_LIST_PROP, NULL);
+ if (num_banks <= 0) {
+ dev_err(dev, "need to specify TCM banks\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < num_banks; i++) {
+ struct resource rsc;
+ resource_size_t size;
+ struct device_node *dt_node;
+ struct rproc_mem_entry *mem;
+ int ret;
+ /*
+ * use u32 as zynqmp_pm* functions use this type
+ *
+ * use ptr because it needs be used later on when releasing
+ * each tcm node in tcm_mem_release
+ */
+ u32 *pnode_id_ptr;
+
+ dt_node = of_parse_phandle(r5_node, BANK_LIST_PROP, i);
+ if (!dt_node) {
+ dev_err(dev, "no tcm banks specified\n");
+ return -EINVAL;
+ }
+
+ if (of_device_is_available(dt_node)) {
+ dev_dbg(dev, "%pOF is available\n", dt_node);
+
+ /* get address */
+ ret = of_address_to_resource(dt_node, 0, &rsc);
+ if (ret < 0) {
+ dev_err(dev, "fail to get rsc mem %pOF",
+ dt_node);
+ return -EINVAL;
+ }
+
+ pnode_id_ptr = devm_kzalloc(dev, sizeof(*pdata),
+ GFP_KERNEL);
+ if (!pnode_id_ptr)
+ return -ENOMEM;
+
+ /* request access */
+ zyqmp_r5_pm_request_tcm(dt_node, dev, pnode_id_ptr);
+
+ /* add carveout */
+ size = resource_size(&rsc);
+ mem = rproc_mem_entry_init(dev, NULL, rsc.start,
+ (int)size, rsc.start,
+ tcm_mem_alloc,
+ tcm_mem_release,
+ rsc.name);
+ if (!mem)
+ return -ENOMEM;
+ mem->priv = (void *)pnode_id_ptr;
+
+ rproc_add_carveout(rproc, mem);
+ } else {
+ dev_info(dev, "node %pOF is not available\n", dt_node);
+ }
+ }
+
+ return 0;
+}
+
+static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ int ret;
+ struct zynqmp_r5_pdata *pdata = rproc->priv;
+ struct device *dev = &pdata->dev;
+
+ ret = parse_tcm_banks(rproc);
+ if (ret) {
+ dev_err(dev, "parse_tcm_banks failed %x\n", ret);
+ return ret;
+ }
+
+ ret = parse_mem_regions(rproc);
+ if (ret) {
+ dev_err(dev, "parse_mem_regions failed %x\n", ret);
+ return ret;
+ }
+
+ ret = rproc_elf_load_rsc_table(rproc, fw);
+ if (ret == -EINVAL) {
+ /*
+ * resource table only required for IPC.
+ * if not present, this is not necessarily an error;
+ * for example, loading r5 hello world application
+ * so simply inform user and keep going.
+ */
+ dev_info(dev, "no resource table found.\n");
+ ret = 0;
+ }
+ return ret;
+}
+
+/* kick a firmware */
+static void zynqmp_r5_rproc_kick(struct rproc *rproc, int vqid)
+{
+ struct sk_buff *skb;
+ unsigned int skb_len;
+ struct zynqmp_ipi_message *mb_msg;
+ int ret;
+
+ struct device *dev = rproc->dev.parent;
+ struct zynqmp_r5_pdata *pdata = rproc->priv;
+
+ dev_dbg(dev, "KICK Firmware to start send messages vqid %d\n", vqid);
+
+ skb_len = (unsigned int)(sizeof(vqid) + sizeof(mb_msg));
+ skb = alloc_skb(skb_len, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(dev,
+ "Failed to allocate skb to kick remote.\n");
+ return;
+ }
+ mb_msg = (struct zynqmp_ipi_message *)skb_put(skb, skb_len);
+ mb_msg->len = sizeof(vqid);
+ memcpy(mb_msg->data, &vqid, sizeof(vqid));
+ skb_queue_tail(&pdata->tx_mc_skbs, skb);
+ ret = mbox_send_message(pdata->tx_chan, mb_msg);
+ if (ret < 0) {
+ dev_warn(dev, "Failed to kick remote.\n");
+ skb_dequeue_tail(&pdata->tx_mc_skbs);
+ kfree_skb(skb);
+ }
+}
+
+static struct rproc_ops zynqmp_r5_rproc_ops = {
+ .start = zynqmp_r5_rproc_start,
+ .stop = zynqmp_r5_rproc_stop,
+ .load = rproc_elf_load_segments,
+ .parse_fw = zynqmp_r5_parse_fw,
+ .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
+ .sanity_check = rproc_elf_sanity_check,
+ .get_boot_addr = rproc_elf_get_boot_addr,
+ .kick = zynqmp_r5_rproc_kick,
+};
+
+/**
+ * zynqmp_r5_release() - ZynqMP R5 device release function
+ * @dev: pointer to the device struct of ZynqMP R5
+ *
+ * Function to release ZynqMP R5 device.
+ */
+static void zynqmp_r5_release(struct device *dev)
+{
+ struct zynqmp_r5_pdata *pdata;
+ struct rproc *rproc;
+ struct sk_buff *skb;
+
+ pdata = dev_get_drvdata(dev);
+ rproc = pdata->rproc;
+ if (rproc) {
+ rproc_del(rproc);
+ rproc_free(rproc);
+ }
+ if (pdata->tx_chan)
+ mbox_free_channel(pdata->tx_chan);
+ if (pdata->rx_chan)
+ mbox_free_channel(pdata->rx_chan);
+
+ /* Discard all SKBs if tx_mc_skbs is initialized */
+ if (&pdata->tx_mc_skbs.prev) {
+ while (!skb_queue_empty(&pdata->tx_mc_skbs)) {
+ skb = skb_dequeue(&pdata->tx_mc_skbs);
+ kfree_skb(skb);
+ }
+ }
+
+ put_device(dev->parent);
+}
+
+/**
+ * event_notified_idr_cb() - event notified idr callback
+ * @id: idr id
+ * @ptr: pointer to idr private data
+ * @data: data passed to idr_for_each callback
+ *
+ * Pass notification to remoteproc virtio
+ *
+ * Return: 0. having return is to satisfy the idr_for_each() function
+ * pointer input argument requirement.
+ **/
+static int event_notified_idr_cb(int id, void *ptr, void *data)
+{
+ struct rproc *rproc = data;
+
+ (void)rproc_vq_interrupt(rproc, id);
+ return 0;
+}
+
+/**
+ * handle_event_notified() - remoteproc notification work funciton
+ * @work: pointer to the work structure
+ *
+ * It checks each registered remoteproc notify IDs.
+ */
+static void handle_event_notified(struct work_struct *work)
+{
+ struct rproc *rproc;
+ struct zynqmp_r5_pdata *pdata;
+
+ pdata = container_of(work, struct zynqmp_r5_pdata, mbox_work);
+
+ (void)mbox_send_message(pdata->rx_chan, NULL);
+ rproc = pdata->rproc;
+ /*
+ * We only use IPI for interrupt. The firmware side may or may
+ * not write the notifyid when it trigger IPI.
+ * And thus, we scan through all the registered notifyids.
+ */
+ idr_for_each(&rproc->notifyids, event_notified_idr_cb, rproc);
+}
+
+/**
+ * zynqmp_r5_mb_rx_cb() - Receive channel mailbox callback
+ * @cl: mailbox client
+ * @mssg: message pointer
+ *
+ * It will schedule the R5 notification work.
+ */
+static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *mssg)
+{
+ struct zynqmp_r5_pdata *pdata;
+
+ pdata = container_of(cl, struct zynqmp_r5_pdata, rx_mc);
+ if (mssg) {
+ struct zynqmp_ipi_message *ipi_msg, *buf_msg;
+ size_t len;
+
+ ipi_msg = (struct zynqmp_ipi_message *)mssg;
+ buf_msg = (struct zynqmp_ipi_message *)pdata->rx_mc_buf;
+ len = (ipi_msg->len >= IPI_BUF_LEN_MAX) ?
+ IPI_BUF_LEN_MAX : ipi_msg->len;
+ buf_msg->len = len;
+ memcpy(buf_msg->data, ipi_msg->data, len);
+ }
+ schedule_work(&pdata->mbox_work);
+}
+
+/**
+ * zynqmp_r5_mb_tx_done() - Request has been sent to the remote
+ * @cl: mailbox client
+ * @mssg: pointer to the message which has been sent
+ * @r: status of last TX - OK or error
+ *
+ * It will be called by the mailbox framework when the last TX has done.
+ */
+static void zynqmp_r5_mb_tx_done(struct mbox_client *cl, void *mssg, int r)
+{
+ struct zynqmp_r5_pdata *pdata;
+ struct sk_buff *skb;
+
+ if (!mssg)
+ return;
+ pdata = container_of(cl, struct zynqmp_r5_pdata, tx_mc);
+ skb = skb_dequeue(&pdata->tx_mc_skbs);
+ kfree_skb(skb);
+}
+
+/**
+ * zynqmp_r5_setup_mbox() - Setup mailboxes
+ *
+ * @pdata: pointer to the ZynqMP R5 processor platform data
+ * @node: pointer of the device node
+ *
+ * Function to setup mailboxes to talk to RPU.
+ *
+ * Return: 0 for success, negative value for failure.
+ */
+static int zynqmp_r5_setup_mbox(struct zynqmp_r5_pdata *pdata,
+ struct device_node *node)
+{
+ struct device *dev = &pdata->dev;
+ struct mbox_client *mclient;
+
+ /* Setup TX mailbox channel client */
+ mclient = &pdata->tx_mc;
+ mclient->dev = dev;
+ mclient->rx_callback = NULL;
+ mclient->tx_block = false;
+ mclient->knows_txdone = false;
+ mclient->tx_done = zynqmp_r5_mb_tx_done;
+
+ /* Setup TX mailbox channel client */
+ mclient = &pdata->rx_mc;
+ mclient->dev = dev;
+ mclient->rx_callback = zynqmp_r5_mb_rx_cb;
+ mclient->tx_block = false;
+ mclient->knows_txdone = false;
+
+ INIT_WORK(&pdata->mbox_work, handle_event_notified);
+
+ /* Request TX and RX channels */
+ pdata->tx_chan = mbox_request_channel_byname(&pdata->tx_mc, "tx");
+ if (IS_ERR(pdata->tx_chan)) {
+ dev_err(dev, "failed to request mbox tx channel.\n");
+ pdata->tx_chan = NULL;
+ return -EINVAL;
+ }
+ pdata->rx_chan = mbox_request_channel_byname(&pdata->rx_mc, "rx");
+ if (IS_ERR(pdata->rx_chan)) {
+ dev_err(dev, "failed to request mbox rx channel.\n");
+ pdata->rx_chan = NULL;
+ return -EINVAL;
+ }
+ skb_queue_head_init(&pdata->tx_mc_skbs);
+
+ return 0;
+}
+
+/**
+ * zynqmp_r5_probe() - Probes ZynqMP R5 processor device node
+ * @pdata: pointer to the ZynqMP R5 processor platform data
+ * @pdev: parent RPU domain platform device
+ * @node: pointer of the device node
+ *
+ * Function to retrieve the information of the ZynqMP R5 device node.
+ *
+ * Return: 0 for success, negative value for failure.
+ */
+static int zynqmp_r5_probe(struct zynqmp_r5_pdata *pdata,
+ struct platform_device *pdev,
+ struct device_node *node)
+{
+ struct device *dev = &pdata->dev;
+ struct rproc *rproc;
+ int ret;
+
+ /* Create device for ZynqMP R5 device */
+ dev->parent = &pdev->dev;
+ dev->release = zynqmp_r5_release;
+ dev->of_node = node;
+ dev_set_name(dev, "%pOF", node);
+ dev_set_drvdata(dev, pdata);
+ ret = device_register(dev);
+ if (ret) {
+ dev_err(dev, "failed to register device.\n");
+ return ret;
+ }
+ get_device(&pdev->dev);
+
+ /* Allocate remoteproc instance */
+ rproc = rproc_alloc(dev, dev_name(dev), &zynqmp_r5_rproc_ops, NULL, 0);
+ if (!rproc) {
+ dev_err(dev, "rproc allocation failed.\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+ pdata->rproc = rproc;
+ rproc->priv = pdata;
+
+ /* Set up DMA mask */
+ ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
+ return ret;
+ }
+
+ /* Get R5 power domain node */
+ ret = of_property_read_u32(node, "pnode-id", &pdata->pnode_id);
+ if (ret) {
+ dev_err(dev, "failed to get power node id.\n");
+ goto error;
+ }
+
+ /* TODO Check if R5 is running */
+
+ /*
+ * Set up R5 if not already setup
+ * This check is needed as there are cases where
+ * a user might repeatedly do modprobe
+ * and modprobe -r. In this case, upon a
+ * subsequent load, this check is needed.
+ */
+ ret = pdata->is_r5_mode_set ? 0 : r5_set_mode(pdata);
+ if (ret) {
+ dev_err(dev, "failed to set R5 operation mode.\n");
+ return ret;
+ }
+
+ if (!of_get_property(dev->of_node, "mboxes", NULL)) {
+ dev_dbg(dev, "no mailboxes.\n");
+ } else {
+ ret = zynqmp_r5_setup_mbox(pdata, node);
+ if (ret < 0)
+ goto error;
+ }
+
+ /* Add R5 remoteproc */
+ ret = rproc_add(rproc);
+ if (ret) {
+ dev_err(dev, "rproc registration failed\n");
+ goto error;
+ }
+ return 0;
+error:
+ if (pdata->rproc)
+ rproc_free(pdata->rproc);
+ pdata->rproc = NULL;
+ device_unregister(dev);
+ put_device(&pdev->dev);
+ return ret;
+}
+
+static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
+{
+ int ret, i = 0;
+ u32 lockstep_mode;
+ struct device *dev = &pdev->dev;
+ struct device_node *nc;
+ struct zynqmp_r5_pdata *pdata;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pdata);
+
+ of_property_read_u32(dev->of_node, "lockstep-mode", &lockstep_mode);
+
+ if (!lockstep_mode) {
+ rpu_mode = PM_RPU_MODE_SPLIT;
+ } else if (lockstep_mode == 1) {
+ rpu_mode = PM_RPU_MODE_LOCKSTEP;
+ } else {
+ dev_err(dev,
+ "Invalid lockstep-mode mode %x in %pOF\n",
+ lockstep_mode, dev->of_node);
+ return -EINVAL;
+ }
+ dev_dbg(dev, "RPU configuration: %s\n",
+ lockstep_mode ? "lockstep" : "split");
+
+ for_each_available_child_of_node(dev->of_node, nc) {
+ ret = zynqmp_r5_probe(&rpus[i], pdev, nc);
+ if (ret) {
+ dev_err(dev, "failed to probe rpu %pOF.\n", nc);
+ return ret;
+ }
+ i++;
+ }
+
+ return 0;
+}
+
+static int zynqmp_r5_remoteproc_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < MAX_RPROCS; i++) {
+ struct zynqmp_r5_pdata *pdata = &rpus[i];
+ struct rproc *rproc;
+
+ /* only do clean up for pdata with active rpu */
+ if (pdata->pnode_id == 0)
+ continue;
+
+ rproc = pdata->rproc;
+ if (rproc) {
+ rproc_del(rproc);
+ rproc_free(rproc);
+ pdata->rproc = NULL;
+ }
+ if (pdata->tx_chan) {
+ mbox_free_channel(pdata->tx_chan);
+ pdata->tx_chan = NULL;
+ }
+ if (pdata->rx_chan) {
+ mbox_free_channel(pdata->rx_chan);
+ pdata->rx_chan = NULL;
+ }
+ if (&(&pdata->dev)->dma_pools)
+ device_unregister(&pdata->dev);
+ }
+
+ return 0;
+}
+
+/* Match table for OF platform binding */
+static const struct of_device_id zynqmp_r5_remoteproc_match[] = {
+ { .compatible = "xlnx,zynqmp-r5-remoteproc-1.0", },
+ { /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
+
+static struct platform_driver zynqmp_r5_remoteproc_driver = {
+ .probe = zynqmp_r5_remoteproc_probe,
+ .remove = zynqmp_r5_remoteproc_remove,
+ .driver = {
+ .name = "zynqmp_r5_remoteproc",
+ .of_match_table = zynqmp_r5_remoteproc_match,
+ },
+};
+module_platform_driver(zynqmp_r5_remoteproc_driver);
+
+MODULE_AUTHOR("Ben Levinsky <ben.levinsky@xilinx.com>");
+MODULE_LICENSE("GPL v2");