diff mbox series

[V2,7/7] remoteproc: imx_proc: enable virtio/mailbox

Message ID 20200927064131.24101-8-peng.fan@nxp.com (mailing list archive)
State New, archived
Headers show
Series remoteproc: imx_rproc: support iMX8MQ/M | expand

Commit Message

Peng Fan Sept. 27, 2020, 6:41 a.m. UTC 
Use virtio/mailbox to build connection between Remote Proccessors
and Linux. Add delayed work to handle incoming messages.

Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_rproc.c | 112 ++++++++++++++++++++++++++++++++-
 1 file changed, 109 insertions(+), 3 deletions(-)

Comments

Mathieu Poirier Oct. 19, 2020, 8:12 p.m. UTC | #1 
On Sun, Sep 27, 2020 at 02:41:31PM +0800, Peng Fan wrote:
> Use virtio/mailbox to build connection between Remote Proccessors
> and Linux. Add delayed work to handle incoming messages.
> 
> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 112 ++++++++++++++++++++++++++++++++-
>  1 file changed, 109 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 0f69f3f745ab..c514d7ca7c81 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -8,6 +8,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/kernel.h>
> +#include <linux/mailbox_client.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/module.h>
>  #include <linux/of_address.h>
> @@ -17,6 +18,8 @@
>  #include <linux/regmap.h>
>  #include <linux/remoteproc.h>
>  
> +#include "remoteproc_internal.h"
> +
>  #define IMX7D_SRC_SCR			0x0C
>  #define IMX7D_ENABLE_M4			BIT(3)
>  #define IMX7D_SW_M4P_RST		BIT(2)
> @@ -88,6 +91,10 @@ struct imx_rproc {
>  	const struct imx_rproc_dcfg	*dcfg;
>  	struct imx_rproc_mem		mem[IMX7D_RPROC_MEM_MAX];
>  	struct clk			*clk;
> +	struct mbox_client		cl;
> +	struct mbox_chan		*tx_ch;
> +	struct mbox_chan		*rx_ch;
> +	struct delayed_work		rproc_work;
>  };
>  
>  static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
> @@ -373,9 +380,30 @@ static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
>  	return 0;
>  }
>  
> +static void imx_rproc_kick(struct rproc *rproc, int vqid)
> +{
> +	struct imx_rproc *priv = rproc->priv;
> +	int err;
> +	__u32 mmsg;
> +
> +	if (!priv->tx_ch) {
> +		dev_err(priv->dev, "No initialized mbox tx channel\n");
> +		return;
> +	}
> +
> +	mmsg = vqid << 16;

Please add a comment that explains the reason for the shift left.

> +
> +	priv->cl.tx_tout = 100;

See my comment below on this.

> +	err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> +	if (err < 0)
> +		dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> +			__func__, vqid, err);
> +}
> +
>  static const struct rproc_ops imx_rproc_ops = {
>  	.start		= imx_rproc_start,
>  	.stop		= imx_rproc_stop,
> +	.kick		= imx_rproc_kick,
>  	.da_to_va       = imx_rproc_da_to_va,
>  	.load		= rproc_elf_load_segments,
>  	.parse_fw	= imx_rproc_parse_fw,
> @@ -458,6 +486,70 @@ static void imx_rproc_memset(struct rproc *rproc, void *s, int c, size_t count)
>  	memset_io((void * __iomem)s, c, count);
>  }
>  
> +static void imx_rproc_vq_work(struct work_struct *work)
> +{
> +	struct delayed_work *dwork = to_delayed_work(work);
> +	struct imx_rproc *priv = container_of(dwork, struct imx_rproc,
> +					      rproc_work);
> +
> +	rproc_vq_interrupt(priv->rproc, 0);
> +	rproc_vq_interrupt(priv->rproc, 1);
> +}
> +
> +static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
> +{
> +	struct rproc *rproc = dev_get_drvdata(cl->dev);
> +	struct imx_rproc *priv = rproc->priv;
> +
> +	schedule_delayed_work(&(priv->rproc_work), 0);

What is the advantage of using a struct delayed_work if there is no delay?  And
since schedule_delayed_work() is using the system_wq, you could simply declare a
struct work_struct and call queue_work() on it.

> +}
> +
> +static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
> +{
> +	struct imx_rproc *priv = rproc->priv;
> +	struct device *dev = priv->dev;
> +	struct mbox_client *cl;
> +	int ret = 0;
> +
> +	if (!of_get_property(dev->of_node, "mbox-names", NULL))
> +		return 0;
> +
> +	cl = &priv->cl;
> +	cl->dev = dev;
> +	cl->tx_block = true;
> +	cl->tx_tout = 20;

What is the point of setting this here when it is set again in imx_rproc_kick()
to 100?

> +	cl->knows_txdone = false;
> +	cl->rx_callback = imx_rproc_rx_callback;
> +
> +	priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> +	if (IS_ERR(priv->tx_ch)) {
> +		if (PTR_ERR(priv->tx_ch) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		ret = PTR_ERR(priv->tx_ch);
> +		dev_dbg(cl->dev, "failed to request mbox tx chan, ret %d\n",
> +			ret);
> +		goto err_out;
> +	}
> +
> +	priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> +	if (IS_ERR(priv->rx_ch)) {
> +		ret = PTR_ERR(priv->rx_ch);
> +		dev_dbg(cl->dev, "failed to request mbox rx chan, ret %d\n",
> +			ret);
> +		goto err_out;
> +	}

Where and when are the channels freed?

Thanks,
Mathieu

> +
> +	return ret;
> +
> +err_out:
> +	if (!IS_ERR(priv->tx_ch))
> +		mbox_free_channel(priv->tx_ch);
> +	if (!IS_ERR(priv->rx_ch))
> +		mbox_free_channel(priv->rx_ch);
> +
> +	return ret;
> +}
> +
>  static int imx_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -501,17 +593,24 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  
>  	dev_set_drvdata(dev, rproc);
>  
> +	ret = imx_rproc_xtr_mbox_init(rproc);
> +	if (ret) {
> +		if (ret == -EPROBE_DEFER)
> +			goto err_put_rproc;
> +		/* mbox is optional, so not fail here */
> +	}
> +
>  	ret = imx_rproc_addr_init(priv, pdev);
>  	if (ret) {
>  		dev_err(dev, "failed on imx_rproc_addr_init\n");
> -		goto err_put_rproc;
> +		goto err_put_mbox;
>  	}
>  
>  	priv->clk = devm_clk_get(dev, NULL);
>  	if (IS_ERR(priv->clk)) {
>  		dev_err(dev, "Failed to get clock\n");
>  		ret = PTR_ERR(priv->clk);
> -		goto err_put_rproc;
> +		goto err_put_mbox;
>  	}
>  
>  	/*
> @@ -521,9 +620,11 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  	ret = clk_prepare_enable(priv->clk);
>  	if (ret) {
>  		dev_err(&rproc->dev, "Failed to enable clock\n");
> -		goto err_put_rproc;
> +		goto err_put_mbox;
>  	}
>  
> +	INIT_DELAYED_WORK(&(priv->rproc_work), imx_rproc_vq_work);
> +
>  	ret = rproc_add(rproc);
>  	if (ret) {
>  		dev_err(dev, "rproc_add failed\n");
> @@ -534,6 +635,11 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  
>  err_put_clk:
>  	clk_disable_unprepare(priv->clk);
> +err_put_mbox:
> +	if (!IS_ERR(priv->tx_ch))
> +		mbox_free_channel(priv->tx_ch);
> +	if (!IS_ERR(priv->rx_ch))
> +		mbox_free_channel(priv->rx_ch);
>  err_put_rproc:
>  	rproc_free(rproc);
>  
> -- 
> 2.28.0
>
diff mbox series

Patch

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 0f69f3f745ab..c514d7ca7c81 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -8,6 +8,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mailbox_client.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
@@ -17,6 +18,8 @@ 
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
 
+#include "remoteproc_internal.h"
+
 #define IMX7D_SRC_SCR			0x0C
 #define IMX7D_ENABLE_M4			BIT(3)
 #define IMX7D_SW_M4P_RST		BIT(2)
@@ -88,6 +91,10 @@  struct imx_rproc {
 	const struct imx_rproc_dcfg	*dcfg;
 	struct imx_rproc_mem		mem[IMX7D_RPROC_MEM_MAX];
 	struct clk			*clk;
+	struct mbox_client		cl;
+	struct mbox_chan		*tx_ch;
+	struct mbox_chan		*rx_ch;
+	struct delayed_work		rproc_work;
 };
 
 static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
@@ -373,9 +380,30 @@  static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
 	return 0;
 }
 
+static void imx_rproc_kick(struct rproc *rproc, int vqid)
+{
+	struct imx_rproc *priv = rproc->priv;
+	int err;
+	__u32 mmsg;
+
+	if (!priv->tx_ch) {
+		dev_err(priv->dev, "No initialized mbox tx channel\n");
+		return;
+	}
+
+	mmsg = vqid << 16;
+
+	priv->cl.tx_tout = 100;
+	err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+	if (err < 0)
+		dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
+			__func__, vqid, err);
+}
+
 static const struct rproc_ops imx_rproc_ops = {
 	.start		= imx_rproc_start,
 	.stop		= imx_rproc_stop,
+	.kick		= imx_rproc_kick,
 	.da_to_va       = imx_rproc_da_to_va,
 	.load		= rproc_elf_load_segments,
 	.parse_fw	= imx_rproc_parse_fw,
@@ -458,6 +486,70 @@  static void imx_rproc_memset(struct rproc *rproc, void *s, int c, size_t count)
 	memset_io((void * __iomem)s, c, count);
 }
 
+static void imx_rproc_vq_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct imx_rproc *priv = container_of(dwork, struct imx_rproc,
+					      rproc_work);
+
+	rproc_vq_interrupt(priv->rproc, 0);
+	rproc_vq_interrupt(priv->rproc, 1);
+}
+
+static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
+{
+	struct rproc *rproc = dev_get_drvdata(cl->dev);
+	struct imx_rproc *priv = rproc->priv;
+
+	schedule_delayed_work(&(priv->rproc_work), 0);
+}
+
+static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
+{
+	struct imx_rproc *priv = rproc->priv;
+	struct device *dev = priv->dev;
+	struct mbox_client *cl;
+	int ret = 0;
+
+	if (!of_get_property(dev->of_node, "mbox-names", NULL))
+		return 0;
+
+	cl = &priv->cl;
+	cl->dev = dev;
+	cl->tx_block = true;
+	cl->tx_tout = 20;
+	cl->knows_txdone = false;
+	cl->rx_callback = imx_rproc_rx_callback;
+
+	priv->tx_ch = mbox_request_channel_byname(cl, "tx");
+	if (IS_ERR(priv->tx_ch)) {
+		if (PTR_ERR(priv->tx_ch) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		ret = PTR_ERR(priv->tx_ch);
+		dev_dbg(cl->dev, "failed to request mbox tx chan, ret %d\n",
+			ret);
+		goto err_out;
+	}
+
+	priv->rx_ch = mbox_request_channel_byname(cl, "rx");
+	if (IS_ERR(priv->rx_ch)) {
+		ret = PTR_ERR(priv->rx_ch);
+		dev_dbg(cl->dev, "failed to request mbox rx chan, ret %d\n",
+			ret);
+		goto err_out;
+	}
+
+	return ret;
+
+err_out:
+	if (!IS_ERR(priv->tx_ch))
+		mbox_free_channel(priv->tx_ch);
+	if (!IS_ERR(priv->rx_ch))
+		mbox_free_channel(priv->rx_ch);
+
+	return ret;
+}
+
 static int imx_rproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -501,17 +593,24 @@  static int imx_rproc_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(dev, rproc);
 
+	ret = imx_rproc_xtr_mbox_init(rproc);
+	if (ret) {
+		if (ret == -EPROBE_DEFER)
+			goto err_put_rproc;
+		/* mbox is optional, so not fail here */
+	}
+
 	ret = imx_rproc_addr_init(priv, pdev);
 	if (ret) {
 		dev_err(dev, "failed on imx_rproc_addr_init\n");
-		goto err_put_rproc;
+		goto err_put_mbox;
 	}
 
 	priv->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(priv->clk)) {
 		dev_err(dev, "Failed to get clock\n");
 		ret = PTR_ERR(priv->clk);
-		goto err_put_rproc;
+		goto err_put_mbox;
 	}
 
 	/*
@@ -521,9 +620,11 @@  static int imx_rproc_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(priv->clk);
 	if (ret) {
 		dev_err(&rproc->dev, "Failed to enable clock\n");
-		goto err_put_rproc;
+		goto err_put_mbox;
 	}
 
+	INIT_DELAYED_WORK(&(priv->rproc_work), imx_rproc_vq_work);
+
 	ret = rproc_add(rproc);
 	if (ret) {
 		dev_err(dev, "rproc_add failed\n");
@@ -534,6 +635,11 @@  static int imx_rproc_probe(struct platform_device *pdev)
 
 err_put_clk:
 	clk_disable_unprepare(priv->clk);
+err_put_mbox:
+	if (!IS_ERR(priv->tx_ch))
+		mbox_free_channel(priv->tx_ch);
+	if (!IS_ERR(priv->rx_ch))
+		mbox_free_channel(priv->rx_ch);
 err_put_rproc:
 	rproc_free(rproc);