diff mbox series

[1/9] dt-bindings: remoteproc: imx_rproc: support i.MX8QXP

Message ID 20220111033333.403448-4-peng.fan@oss.nxp.com (mailing list archive)
State Changes Requested
Headers show
Series [1/9] dt-bindings: remoteproc: imx_rproc: support i.MX8QXP | expand

Commit Message

Peng Fan (OSS) Jan. 11, 2022, 3:33 a.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

Add i.MX8QXP compatible

Add a new property rsrc-id for SoC which supports SCFW. This rsrc-id
is used to check whether remote process is under control of Linux or
not.

To i.MX8QM/QXP, when M4 is in the same hardware partition with Cortex-A
cores, need power up M4 through SCFW, then M4 could start. So introduce
power-domains property

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml  | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Peng Fan Jan. 11, 2022, 6:44 a.m. UTC | #1 
> Subject: [PATCH 1/9] dt-bindings: remoteproc: imx_rproc: support i.MX8QXP

+Rob

> 
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add i.MX8QXP compatible
> 
> Add a new property rsrc-id for SoC which supports SCFW. This rsrc-id is used
> to check whether remote process is under control of Linux or not.
> 
> To i.MX8QM/QXP, when M4 is in the same hardware partition with Cortex-A
> cores, need power up M4 through SCFW, then M4 could start. So introduce
> power-domains property
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml  | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git
> a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> index fc16d903353e..ed1bcb3046a9 100644
> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> @@ -19,6 +19,7 @@ properties:
>        - fsl,imx8mm-cm4
>        - fsl,imx8mn-cm7
>        - fsl,imx8mp-cm7
> +      - fsl,imx8qxp-cm4
>        - fsl,imx8ulp-cm33
>        - fsl,imx7d-cm4
>        - fsl,imx7ulp-cm4
> @@ -59,6 +60,15 @@ properties:
>        Indicate whether need to load the default firmware and start the
> remote
>        processor automatically.
> 
> +  power-domains:
> +    maxItems: 8
> +
> +  rsrc-id:
> +    description:
> +      This property is to specify the resource id of the remote processor in
> SoC
> +      which supports SCFW
> +    maxItems: 1
> +
>  required:
>    - compatible
> 
> --
> 2.25.1
Mathieu Poirier Jan. 18, 2022, 6:41 p.m. UTC | #2 
On Tue, Jan 11, 2022 at 11:33:25AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add i.MX8QXP compatible
> 
> Add a new property rsrc-id for SoC which supports SCFW. This rsrc-id

You are introducing an acronym that doesn't have a definition - I have to grep
the kernel tree to have an idea of what SCFW is.  That consumes time that I
don't have to review your code or someone else's. 

> is used to check whether remote process is under control of Linux or

s/process/processor

> not.
> 
> To i.MX8QM/QXP, when M4 is in the same hardware partition with Cortex-A
> cores, need power up M4 through SCFW, then M4 could start. So introduce
> power-domains property
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml  | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> index fc16d903353e..ed1bcb3046a9 100644
> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> @@ -19,6 +19,7 @@ properties:
>        - fsl,imx8mm-cm4
>        - fsl,imx8mn-cm7
>        - fsl,imx8mp-cm7
> +      - fsl,imx8qxp-cm4
>        - fsl,imx8ulp-cm33
>        - fsl,imx7d-cm4
>        - fsl,imx7ulp-cm4
> @@ -59,6 +60,15 @@ properties:
>        Indicate whether need to load the default firmware and start the remote
>        processor automatically.
>  
> +  power-domains:
> +    maxItems: 8
> +
> +  rsrc-id:
> +    description:
> +      This property is to specify the resource id of the remote processor in SoC
> +      which supports SCFW
> +    maxItems: 1
> +
>  required:
>    - compatible
>  
> -- 
> 2.25.1
>
Peng Fan Jan. 19, 2022, 2:20 a.m. UTC | #3 
> Subject: Re: [PATCH 1/9] dt-bindings: remoteproc: imx_rproc: support
> i.MX8QXP
> 
> On Tue, Jan 11, 2022 at 11:33:25AM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > Add i.MX8QXP compatible
> >
> > Add a new property rsrc-id for SoC which supports SCFW. This rsrc-id
> 
> You are introducing an acronym that doesn't have a definition - I have to grep
> the kernel tree to have an idea of what SCFW is.  That consumes time that I
> don't have to review your code or someone else's.

Sorry. SCFW(System controller Unit Firmware).

> 
> > is used to check whether remote process is under control of Linux or
> 
> s/process/processor

Fix in v2.

Thanks,
Peng.

> 
> > not.
> >
> > To i.MX8QM/QXP, when M4 is in the same hardware partition with
> > Cortex-A cores, need power up M4 through SCFW, then M4 could start. So
> > introduce power-domains property
> >
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> >  .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml  | 10
> > ++++++++++
> >  1 file changed, 10 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> > b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> > index fc16d903353e..ed1bcb3046a9 100644
> > --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> > +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> > @@ -19,6 +19,7 @@ properties:
> >        - fsl,imx8mm-cm4
> >        - fsl,imx8mn-cm7
> >        - fsl,imx8mp-cm7
> > +      - fsl,imx8qxp-cm4
> >        - fsl,imx8ulp-cm33
> >        - fsl,imx7d-cm4
> >        - fsl,imx7ulp-cm4
> > @@ -59,6 +60,15 @@ properties:
> >        Indicate whether need to load the default firmware and start the
> remote
> >        processor automatically.
> >
> > +  power-domains:
> > +    maxItems: 8
> > +
> > +  rsrc-id:
> > +    description:
> > +      This property is to specify the resource id of the remote processor
> in SoC
> > +      which supports SCFW
> > +    maxItems: 1
> > +
> >  required:
> >    - compatible
> >
> > --
> > 2.25.1
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index fc16d903353e..ed1bcb3046a9 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -19,6 +19,7 @@  properties:
       - fsl,imx8mm-cm4
       - fsl,imx8mn-cm7
       - fsl,imx8mp-cm7
+      - fsl,imx8qxp-cm4
       - fsl,imx8ulp-cm33
       - fsl,imx7d-cm4
       - fsl,imx7ulp-cm4
@@ -59,6 +60,15 @@  properties:
       Indicate whether need to load the default firmware and start the remote
       processor automatically.
 
+  power-domains:
+    maxItems: 8
+
+  rsrc-id:
+    description:
+      This property is to specify the resource id of the remote processor in SoC
+      which supports SCFW
+    maxItems: 1
+
 required:
   - compatible