diff mbox series

[2/3] dt-bindings: remoteproc: Add AVM WASP

Message ID 20220221135351.GA7342@ubuntu (mailing list archive)
State Superseded
Headers show
Series Add support for WASP SoC on AVM router boards | expand

Commit Message

Daniel Kestrel Feb. 21, 2022, 1:53 p.m. UTC
AVM Fritzbox router boards may contain an additional ATH79
based SoC that has the wifi cards connected.
This patch adds bindings for this remote processor.

Signed-off-by: Daniel Kestrel <kestrelseventyfour@gmail.com>
---
 .../bindings/remoteproc/avm,wasp-rproc.yaml   | 93 +++++++++++++++++++
 1 file changed, 93 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml

Comments

Krzysztof Kozlowski Feb. 21, 2022, 4:47 p.m. UTC | #1
On 21/02/2022 14:53, Daniel Kestrel wrote:
> AVM Fritzbox router boards may contain an additional ATH79
> based SoC that has the wifi cards connected.
> This patch adds bindings for this remote processor.
> 
> Signed-off-by: Daniel Kestrel <kestrelseventyfour@gmail.com>
> ---
>  .../bindings/remoteproc/avm,wasp-rproc.yaml   | 93 +++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> new file mode 100644
> index 000000000000..21f3bbcc4202
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/avm,wasp-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AVM WASP processor controller bindings
> +
> +maintainers:
> +  - Daniel Kestrel <kestrelseventyfour@gmail.com>
> +
> +description: |
> +  This document defines the bindings for the remoteproc component that loads and
> +  boots firmwares on the AVM Wireless Assistent Support Processor (WASP) SoC
> +  that is attached to some AVM Fritzbox devices (3390, 3490, 5490, 5491, 7490).
> +
> +properties:
> +  compatible:
> +    const: avm,wasp
> +
> +  ath9k-firmware:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: |
> +      Should contain the name of the ath9k eeprom that is to be loaded from
> +      the lantiq host flash. Wifi on the WASP SoC does not work without it.
> +      The file should be located on the firmware search path.

Are you sure this is a property of hardware? It looks like runtime
configuration parameter.

> +
> +  ath10k-caldata:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: |
> +      Should contain the name of the ath10k caldata that is to be loaded from
> +      the lantiq host flash. Wifi on the WASP SoC does not work without it.
> +      The file should be located on the firmware search path.

Same.

> +
> +  wasp-netboot-firmware:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: |
> +      Should contain the name of the netboot firmware that is to be loaded
> +      and started on the WASP SoC using mdio in order to be able to load
> +      the initramfs image as a second stage.
> +      The file should be located on the firmware search path.

Same.

> +
> +  wasp-netboot-mdio:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Reference to the Lantiq GSWIP switch mdio.

Vendor prefix.

> +
> +  wasp-initramfs-port:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Reference to the network port, where the WASP SoC is connected to.

Vendor prefix.

> +
> +  wasp-initramfs-image:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: |
> +      Should contain the name of the initramfs linux image that is to be loaded
> +      and started on the WASP SoC.
> +      The file should be located on the firmware search path.

initramfs path looks even less like a property of hardware... If you
change initramfs from CPIO to initrd or GZ, hardware changes as well?

> +  reset-gpio:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: Reference and parameters for the reset gpio of the WASP SoC.

Wrong suffix, unneeded type. Did you run dt_binding_check?

"Reference and parameters" are obvious, so they should be skipped.

> +
> +  startup-gpio:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: Reference and parameters for the power switch gpio of the WASP SoC.

Same.

> +
> +required:
> +  - compatible
> +  - ath9k-firmware
> +  - ath10k-caldata
> +  - wasp-netboot-firmware
> +  - wasp-netboot-mdio
> +  - wasp-initramfs-port
> +  - wasp-initramfs-image
> +  - reset-gpio
> +  - startup-gpio
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    avm-wasp {

Generic node name describing class of a device. AVM is company, WASP is
product, so neither of them are generic.


Best regards,
Krzysztof
Daniel Kestrel Feb. 22, 2022, 3:27 p.m. UTC | #2
Am Mo., 21. Feb. 2022 um 17:47 Uhr schrieb Krzysztof Kozlowski
<krzk@kernel.org>:
>
> On 21/02/2022 14:53, Daniel Kestrel wrote:
> > AVM Fritzbox router boards may contain an additional ATH79
> > based SoC that has the wifi cards connected.
> > This patch adds bindings for this remote processor.
> >
> > Signed-off-by: Daniel Kestrel <kestrelseventyfour@gmail.com>
> > ---
> >  .../bindings/remoteproc/avm,wasp-rproc.yaml   | 93 +++++++++++++++++++
> >  1 file changed, 93 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> > new file mode 100644
> > index 000000000000..21f3bbcc4202
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> > @@ -0,0 +1,93 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/remoteproc/avm,wasp-rproc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: AVM WASP processor controller bindings
> > +
> > +maintainers:
> > +  - Daniel Kestrel <kestrelseventyfour@gmail.com>
> > +
> > +description: |
> > +  This document defines the bindings for the remoteproc component that loads and
> > +  boots firmwares on the AVM Wireless Assistent Support Processor (WASP) SoC
> > +  that is attached to some AVM Fritzbox devices (3390, 3490, 5490, 5491, 7490).
> > +
> > +properties:
> > +  compatible:
> > +    const: avm,wasp
> > +
> > +  ath9k-firmware:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: |
> > +      Should contain the name of the ath9k eeprom that is to be loaded from
> > +      the lantiq host flash. Wifi on the WASP SoC does not work without it.
> > +      The file should be located on the firmware search path.
>
> Are you sure this is a property of hardware? It looks like runtime
> configuration parameter.
>
> > +
> > +  ath10k-caldata:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: |
> > +      Should contain the name of the ath10k caldata that is to be loaded from
> > +      the lantiq host flash. Wifi on the WASP SoC does not work without it.
> > +      The file should be located on the firmware search path.
>
> Same.
>
> > +
> > +  wasp-netboot-firmware:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: |
> > +      Should contain the name of the netboot firmware that is to be loaded
> > +      and started on the WASP SoC using mdio in order to be able to load
> > +      the initramfs image as a second stage.
> > +      The file should be located on the firmware search path.
>
> Same.
>
> > +
> > +  wasp-netboot-mdio:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: Reference to the Lantiq GSWIP switch mdio.
>
> Vendor prefix.
>
> > +
> > +  wasp-initramfs-port:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: Reference to the network port, where the WASP SoC is connected to.
>
> Vendor prefix.
>
> > +
> > +  wasp-initramfs-image:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: |
> > +      Should contain the name of the initramfs linux image that is to be loaded
> > +      and started on the WASP SoC.
> > +      The file should be located on the firmware search path.
>
> initramfs path looks even less like a property of hardware... If you
> change initramfs from CPIO to initrd or GZ, hardware changes as well?
>
> > +  reset-gpio:
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    description: Reference and parameters for the reset gpio of the WASP SoC.
>
> Wrong suffix, unneeded type. Did you run dt_binding_check?

Hi Krzystof,

Sorry for missing the dt_binding_check.
I have switched to use devm_gpiod_get and it does not work if the
suffix is not -gpio
or -gpios (see of_find_gpio method).
Would avm,reset-gpio be ok to use here?

Thanks.
>
> "Reference and parameters" are obvious, so they should be skipped.
>
> > +
> > +  startup-gpio:
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    description: Reference and parameters for the power switch gpio of the WASP SoC.
>
> Same.
Is avm,startup-gpio ok, like above?
>
> > +
> > +required:
> > +  - compatible
> > +  - ath9k-firmware
> > +  - ath10k-caldata
> > +  - wasp-netboot-firmware
> > +  - wasp-netboot-mdio
> > +  - wasp-initramfs-port
> > +  - wasp-initramfs-image
> > +  - reset-gpio
> > +  - startup-gpio
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    avm-wasp {
>
> Generic node name describing class of a device. AVM is company, WASP is
> product, so neither of them are generic.
>
>
> Best regards,
> Krzysztof
Krzysztof Kozlowski Feb. 23, 2022, 7:06 a.m. UTC | #3
On 22/02/2022 16:27, Kestrel seventyfour wrote:
> Am Mo., 21. Feb. 2022 um 17:47 Uhr schrieb Krzysztof Kozlowski
> <krzk@kernel.org>:
>>
>> On 21/02/2022 14:53, Daniel Kestrel wrote:
>>> AVM Fritzbox router boards may contain an additional ATH79
>>> based SoC that has the wifi cards connected.
>>> This patch adds bindings for this remote processor.
>>>
>>> Signed-off-by: Daniel Kestrel <kestrelseventyfour@gmail.com>
>>> ---
>>>  .../bindings/remoteproc/avm,wasp-rproc.yaml   | 93 +++++++++++++++++++
>>>  1 file changed, 93 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
>>> new file mode 100644
>>> index 000000000000..21f3bbcc4202
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
>>> @@ -0,0 +1,93 @@
>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/remoteproc/avm,wasp-rproc.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: AVM WASP processor controller bindings
>>> +
>>> +maintainers:
>>> +  - Daniel Kestrel <kestrelseventyfour@gmail.com>
>>> +
>>> +description: |
>>> +  This document defines the bindings for the remoteproc component that loads and
>>> +  boots firmwares on the AVM Wireless Assistent Support Processor (WASP) SoC
>>> +  that is attached to some AVM Fritzbox devices (3390, 3490, 5490, 5491, 7490).
>>> +
>>> +properties:
>>> +  compatible:
>>> +    const: avm,wasp
>>> +
>>> +  ath9k-firmware:
>>> +    $ref: /schemas/types.yaml#/definitions/string
>>> +    description: |
>>> +      Should contain the name of the ath9k eeprom that is to be loaded from
>>> +      the lantiq host flash. Wifi on the WASP SoC does not work without it.
>>> +      The file should be located on the firmware search path.
>>
>> Are you sure this is a property of hardware? It looks like runtime
>> configuration parameter.
>>
>>> +
>>> +  ath10k-caldata:
>>> +    $ref: /schemas/types.yaml#/definitions/string
>>> +    description: |
>>> +      Should contain the name of the ath10k caldata that is to be loaded from
>>> +      the lantiq host flash. Wifi on the WASP SoC does not work without it.
>>> +      The file should be located on the firmware search path.
>>
>> Same.
>>
>>> +
>>> +  wasp-netboot-firmware:
>>> +    $ref: /schemas/types.yaml#/definitions/string
>>> +    description: |
>>> +      Should contain the name of the netboot firmware that is to be loaded
>>> +      and started on the WASP SoC using mdio in order to be able to load
>>> +      the initramfs image as a second stage.
>>> +      The file should be located on the firmware search path.
>>
>> Same.
>>
>>> +
>>> +  wasp-netboot-mdio:
>>> +    $ref: /schemas/types.yaml#/definitions/phandle
>>> +    description: Reference to the Lantiq GSWIP switch mdio.
>>
>> Vendor prefix.
>>
>>> +
>>> +  wasp-initramfs-port:
>>> +    $ref: /schemas/types.yaml#/definitions/phandle
>>> +    description: Reference to the network port, where the WASP SoC is connected to.
>>
>> Vendor prefix.
>>
>>> +
>>> +  wasp-initramfs-image:
>>> +    $ref: /schemas/types.yaml#/definitions/string
>>> +    description: |
>>> +      Should contain the name of the initramfs linux image that is to be loaded
>>> +      and started on the WASP SoC.
>>> +      The file should be located on the firmware search path.
>>
>> initramfs path looks even less like a property of hardware... If you
>> change initramfs from CPIO to initrd or GZ, hardware changes as well?
>>
>>> +  reset-gpio:
>>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>>> +    description: Reference and parameters for the reset gpio of the WASP SoC.
>>
>> Wrong suffix, unneeded type. Did you run dt_binding_check?
> 
> Hi Krzystof,
> 
> Sorry for missing the dt_binding_check.
> I have switched to use devm_gpiod_get and it does not work if the
> suffix is not -gpio
> or -gpios (see of_find_gpio method).
> Would avm,reset-gpio be ok to use here?

No, because the suffix must be -gpios.
These are the legacy, often deprecated properties:
git grep '\-gpio:' -- Documentation/devicetree/ | grep yaml

These are proper:
git grep '\-gpios:' -- Documentation/devicetree/ | grep yaml


> 
> Thanks.
>>
>> "Reference and parameters" are obvious, so they should be skipped.
>>
>>> +
>>> +  startup-gpio:
>>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>>> +    description: Reference and parameters for the power switch gpio of the WASP SoC.
>>
>> Same.
> Is avm,startup-gpio ok, like above?

avm,startup-gpios


Best regards,
Krzysztof
Rob Herring (Arm) Feb. 24, 2022, 4:07 p.m. UTC | #4
On Mon, Feb 21, 2022 at 05:47:34PM +0100, Krzysztof Kozlowski wrote:
> On 21/02/2022 14:53, Daniel Kestrel wrote:
> > AVM Fritzbox router boards may contain an additional ATH79
> > based SoC that has the wifi cards connected.
> > This patch adds bindings for this remote processor.
> > 
> > Signed-off-by: Daniel Kestrel <kestrelseventyfour@gmail.com>
> > ---
> >  .../bindings/remoteproc/avm,wasp-rproc.yaml   | 93 +++++++++++++++++++
> >  1 file changed, 93 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> > new file mode 100644
> > index 000000000000..21f3bbcc4202
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
> > @@ -0,0 +1,93 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/remoteproc/avm,wasp-rproc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: AVM WASP processor controller bindings
> > +
> > +maintainers:
> > +  - Daniel Kestrel <kestrelseventyfour@gmail.com>
> > +
> > +description: |
> > +  This document defines the bindings for the remoteproc component that loads and
> > +  boots firmwares on the AVM Wireless Assistent Support Processor (WASP) SoC
> > +  that is attached to some AVM Fritzbox devices (3390, 3490, 5490, 5491, 7490).
> > +
> > +properties:
> > +  compatible:
> > +    const: avm,wasp
> > +
> > +  ath9k-firmware:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: |
> > +      Should contain the name of the ath9k eeprom that is to be loaded from
> > +      the lantiq host flash. Wifi on the WASP SoC does not work without it.
> > +      The file should be located on the firmware search path.
> 
> Are you sure this is a property of hardware? It looks like runtime
> configuration parameter.

The standardish name for this is 'firmware-name'.

'name of the ath9k eeprom' is an odd description given there is no 
eeprom in this case. Where it is loaded from exactly is outside the 
scope of this binding.

> 
> > +
> > +  ath10k-caldata:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: |
> > +      Should contain the name of the ath10k caldata that is to be loaded from
> > +      the lantiq host flash. Wifi on the WASP SoC does not work without it.
> > +      The file should be located on the firmware search path.
> 
> Same.

Ideally, 'firmware-name' would cover both cases and just provide a base 
name that the driver transforms into file names.

> 
> > +
> > +  wasp-netboot-firmware:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: |
> > +      Should contain the name of the netboot firmware that is to be loaded
> > +      and started on the WASP SoC using mdio in order to be able to load
> > +      the initramfs image as a second stage.

initramfs is a Linux detail and should not be in binding.

> > +      The file should be located on the firmware search path.
> 
> Same.
> 
> > +
> > +  wasp-netboot-mdio:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: Reference to the Lantiq GSWIP switch mdio.
> 
> Vendor prefix.
> 
> > +
> > +  wasp-initramfs-port:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: Reference to the network port, where the WASP SoC is connected to.
> 
> Vendor prefix.
> 
> > +
> > +  wasp-initramfs-image:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: |
> > +      Should contain the name of the initramfs linux image that is to be loaded
> > +      and started on the WASP SoC.
> > +      The file should be located on the firmware search path.
> 
> initramfs path looks even less like a property of hardware... If you
> change initramfs from CPIO to initrd or GZ, hardware changes as well?

And simply not how standard initramfs loading works. Boot menu files are 
how one gives the bootloader a location of initramfs file and chosen is 
how the kernel gets the memory location it was loaded to.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
new file mode 100644
index 000000000000..21f3bbcc4202
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/avm,wasp-rproc.yaml
@@ -0,0 +1,93 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/avm,wasp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AVM WASP processor controller bindings
+
+maintainers:
+  - Daniel Kestrel <kestrelseventyfour@gmail.com>
+
+description: |
+  This document defines the bindings for the remoteproc component that loads and
+  boots firmwares on the AVM Wireless Assistent Support Processor (WASP) SoC
+  that is attached to some AVM Fritzbox devices (3390, 3490, 5490, 5491, 7490).
+
+properties:
+  compatible:
+    const: avm,wasp
+
+  ath9k-firmware:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should contain the name of the ath9k eeprom that is to be loaded from
+      the lantiq host flash. Wifi on the WASP SoC does not work without it.
+      The file should be located on the firmware search path.
+
+  ath10k-caldata:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should contain the name of the ath10k caldata that is to be loaded from
+      the lantiq host flash. Wifi on the WASP SoC does not work without it.
+      The file should be located on the firmware search path.
+
+  wasp-netboot-firmware:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should contain the name of the netboot firmware that is to be loaded
+      and started on the WASP SoC using mdio in order to be able to load
+      the initramfs image as a second stage.
+      The file should be located on the firmware search path.
+
+  wasp-netboot-mdio:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the Lantiq GSWIP switch mdio.
+
+  wasp-initramfs-port:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the network port, where the WASP SoC is connected to.
+
+  wasp-initramfs-image:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should contain the name of the initramfs linux image that is to be loaded
+      and started on the WASP SoC.
+      The file should be located on the firmware search path.
+
+  reset-gpio:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Reference and parameters for the reset gpio of the WASP SoC.
+
+  startup-gpio:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Reference and parameters for the power switch gpio of the WASP SoC.
+
+required:
+  - compatible
+  - ath9k-firmware
+  - ath10k-caldata
+  - wasp-netboot-firmware
+  - wasp-netboot-mdio
+  - wasp-initramfs-port
+  - wasp-initramfs-image
+  - reset-gpio
+  - startup-gpio
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    avm-wasp {
+        compatible = "avm,wasp";
+        ath9k-firmware = "ath9k-eeprom-ahb-18100000.wmac.bin";
+        ath10k-caldata = "ath10k/cal-pci-0000:00:00.0.bin";
+        wasp-netboot-firmware = "netboot.fw";
+        wasp-netboot-mdio = <&gswip_mdio>;
+        wasp-initramfs-port = <&port5>;
+        wasp-initramfs-image = "avm_fritzx490-wasp-initramfs-kernel.bin";
+        reset-gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
+        startup-gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
+    };