@@ -649,99 +649,6 @@ static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
return 0;
}
-/**
- * imx_dsp_rproc_elf_load_segments() - load firmware segments to memory
- * @rproc: remote processor which will be booted using these fw segments
- * @fw: the ELF firmware image
- *
- * This function specially checks if memsz is zero or not, otherwise it
- * is mostly same as rproc_elf_load_segments().
- */
-static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc,
- const struct firmware *fw)
-{
- struct device *dev = &rproc->dev;
- u8 class = fw_elf_get_class(fw);
- u32 elf_phdr_get_size = elf_size_of_phdr(class);
- const u8 *elf_data = fw->data;
- const void *ehdr, *phdr;
- int i, ret = 0;
- u16 phnum;
-
- ehdr = elf_data;
- phnum = elf_hdr_get_e_phnum(class, ehdr);
- phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
-
- /* go through the available ELF segments */
- for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
- u64 da = elf_phdr_get_p_paddr(class, phdr);
- u64 memsz = elf_phdr_get_p_memsz(class, phdr);
- u64 filesz = elf_phdr_get_p_filesz(class, phdr);
- u64 offset = elf_phdr_get_p_offset(class, phdr);
- u32 type = elf_phdr_get_p_type(class, phdr);
- void *ptr;
-
- /*
- * There is a case that with PT_LOAD type, the
- * filesz = memsz = 0. If memsz = 0, rproc_da_to_va
- * should return NULL ptr, then error is returned.
- * So this case should be skipped from the loop.
- * Add !memsz checking here.
- */
- if (type != PT_LOAD || !memsz)
- continue;
-
- dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
- type, da, memsz, filesz);
-
- if (filesz > memsz) {
- dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
- filesz, memsz);
- ret = -EINVAL;
- break;
- }
-
- if (offset + filesz > fw->size) {
- dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
- offset + filesz, fw->size);
- ret = -EINVAL;
- break;
- }
-
- if (!rproc_u64_fit_in_size_t(memsz)) {
- dev_err(dev, "size (%llx) does not fit in size_t type\n",
- memsz);
- ret = -EOVERFLOW;
- break;
- }
-
- /* grab the kernel address for this device address */
- ptr = rproc_da_to_va(rproc, da, memsz, NULL);
- if (!ptr) {
- dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
- memsz);
- ret = -EINVAL;
- break;
- }
-
- /* put the segment where the remote processor expects it */
- if (filesz)
- memcpy(ptr, elf_data + offset, filesz);
-
- /*
- * Zero out remaining memory for this segment.
- *
- * This isn't strictly required since dma_alloc_coherent already
- * did this for us. albeit harmless, we may consider removing
- * this.
- */
- if (memsz > filesz)
- memset(ptr + filesz, 0, memsz - filesz);
- }
-
- return ret;
-}
-
/* Prepare function for rproc_ops */
static int imx_dsp_rproc_prepare(struct rproc *rproc)
{
@@ -808,7 +715,7 @@ static const struct rproc_ops imx_dsp_rproc_ops = {
.start = imx_dsp_rproc_start,
.stop = imx_dsp_rproc_stop,
.kick = imx_dsp_rproc_kick,
- .load = imx_dsp_rproc_elf_load_segments,
+ .load = rproc_elf_load_segments,
.parse_fw = rproc_elf_load_rsc_table,
.sanity_check = rproc_elf_sanity_check,
.get_boot_addr = rproc_elf_get_boot_addr,