diff mbox series

[2/9] remoteproc: qcom: q6v5-mss: Add modem support on MSM8953

Message ID 20220511161602.117772-3-sireeshkodali1@gmail.com (mailing list archive)
State Changes Requested
Headers show
Series Add support for remoteprocs on the MSM8953 platform | expand

Commit Message

Sireesh Kodali May 11, 2022, 4:15 p.m. UTC
The modem on the MSM8953 platform is similar to the modem on the MSM8996
platform in terms of set up. It differs primarily in the way it needs SCM
to bless the MPSS firmware region.

Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 64 +++++++++++++++++++++++++++---
 1 file changed, 58 insertions(+), 6 deletions(-)

Comments

Dmitry Baryshkov May 11, 2022, 4:54 p.m. UTC | #1
On 11/05/2022 19:15, Sireesh Kodali wrote:
> The modem on the MSM8953 platform is similar to the modem on the MSM8996
> platform in terms of set up. It differs primarily in the way it needs SCM
> to bless the MPSS firmware region.
> 
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> ---
>   drivers/remoteproc/qcom_q6v5_mss.c | 64 +++++++++++++++++++++++++++---
>   1 file changed, 58 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index af217de75e4d..a73fdcddeda4 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -234,6 +234,7 @@ struct q6v5 {
>   
>   enum {
>   	MSS_MSM8916,
> +	MSS_MSM8953,
>   	MSS_MSM8974,
>   	MSS_MSM8996,
>   	MSS_MSM8998,
> @@ -687,12 +688,14 @@ static int q6v5proc_reset(struct q6v5 *qproc)
>   		}
>   		goto pbl_wait;
>   	} else if (qproc->version == MSS_MSM8996 ||
> -		   qproc->version == MSS_MSM8998) {
> +		   qproc->version == MSS_MSM8998 ||
> +		   qproc->version == MSS_MSM8953) {
>   		int mem_pwr_ctl;
>   
>   		/* Override the ACC value if required */
> -		writel(QDSP6SS_ACC_OVERRIDE_VAL,
> -		       qproc->reg_base + QDSP6SS_STRAP_ACC);
> +		if (qproc->version != MSS_MSM8953)
> +			writel(QDSP6SS_ACC_OVERRIDE_VAL,
> +					qproc->reg_base + QDSP6SS_STRAP_ACC);
>   
>   		/* Assert resets, stop core */
>   		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
> @@ -734,7 +737,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
>   		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
>   
>   		/* Turn on L1, L2, ETB and JU memories 1 at a time */
> -		if (qproc->version == MSS_MSM8996) {
> +		if (qproc->version == MSS_MSM8996 ||
> +			qproc->version == MSS_MSM8953) {
>   			mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
>   			i = 19;
>   		} else {
> @@ -1314,7 +1318,16 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>   			max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
>   	}
>   
> -	/*
> +	if (qproc->version == MSS_MSM8953) {
> +		ret = qcom_scm_pas_mem_setup(5, qproc->mpss_phys, qproc->mpss_size);
> +		if (ret) {
> +			dev_err(qproc->dev,
> +					"setting up mpss memory failed: %d\n", ret);
> +			goto release_firmware;
> +		}
> +	}
> +
> +	/**

Single star please

>   	 * In case of a modem subsystem restart on secure devices, the modem
>   	 * memory can be reclaimed only after MBA is loaded.
>   	 */
> @@ -1413,7 +1426,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>   			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
>   		}
>   		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> -
>   		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
>   		if (ret < 0) {
>   			dev_err(qproc->dev, "MPSS authentication failed: %d\n",
> @@ -1422,6 +1434,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>   		}
>   	}
>   
> +

Unnecessary


>   	/* Transfer ownership of modem ddr region to q6 */
>   	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
>   				      qproc->mpss_phys, qproc->mpss_size);
> @@ -2198,6 +2211,44 @@ static const struct rproc_hexagon_res msm8996_mss = {
>   	.version = MSS_MSM8996,
>   };
>   
> +static const struct rproc_hexagon_res msm8953_mss = {
> +	.hexagon_mba_image = "mba.mbn",
> +	.proxy_supply = (struct qcom_mss_reg_res[]) {
> +		{
> +			.supply = "pll",
> +			.uA = 100000,
> +		},
> +		{}
> +	},
> +	.proxy_pd_names = (char*[]) {
> +			"cx",
> +			"mx",
> +			NULL
> +	},
> +	.active_supply = (struct qcom_mss_reg_res[]) {
> +		{
> +			.supply = "mss",
> +			.uV = 1050000,
> +			.uA = 100000,
> +		},
> +		{}
> +	},
> +	.proxy_clk_names = (char*[]){
> +			"xo",
> +			NULL
> +	},
> +	.active_clk_names = (char*[]){
> +			"iface",
> +			"bus",
> +			"mem",
> +			NULL
> +	},
> +	.need_mem_protection = false,
> +	.has_alt_reset = false,
> +	.has_spare_reg = false,


Please follow the custom  and define the rest of fields here.

> +	.version = MSS_MSM8953,
> +};
> +
>   static const struct rproc_hexagon_res msm8916_mss = {
>   	.hexagon_mba_image = "mba.mbn",
>   	.proxy_supply = (struct qcom_mss_reg_res[]) {
> @@ -2301,6 +2352,7 @@ static const struct of_device_id q6v5_of_match[] = {
>   	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
>   	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
>   	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
> +	{ .compatible = "qcom,msm8953-mss-pil", .data = &msm8953_mss},
>   	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
>   	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
>   	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
Sireesh Kodali May 12, 2022, 5:16 a.m. UTC | #2
On Wed May 11, 2022 at 10:24 PM IST, Dmitry Baryshkov wrote:
> On 11/05/2022 19:15, Sireesh Kodali wrote:
> > The modem on the MSM8953 platform is similar to the modem on the MSM8996
> > platform in terms of set up. It differs primarily in the way it needs SCM
> > to bless the MPSS firmware region.
> > 
> > Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> > ---
> >   drivers/remoteproc/qcom_q6v5_mss.c | 64 +++++++++++++++++++++++++++---
> >   1 file changed, 58 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> > index af217de75e4d..a73fdcddeda4 100644
> > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > @@ -234,6 +234,7 @@ struct q6v5 {
> >   
> >   enum {
> >   	MSS_MSM8916,
> > +	MSS_MSM8953,
> >   	MSS_MSM8974,
> >   	MSS_MSM8996,
> >   	MSS_MSM8998,
> > @@ -687,12 +688,14 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> >   		}
> >   		goto pbl_wait;
> >   	} else if (qproc->version == MSS_MSM8996 ||
> > -		   qproc->version == MSS_MSM8998) {
> > +		   qproc->version == MSS_MSM8998 ||
> > +		   qproc->version == MSS_MSM8953) {
> >   		int mem_pwr_ctl;
> >   
> >   		/* Override the ACC value if required */
> > -		writel(QDSP6SS_ACC_OVERRIDE_VAL,
> > -		       qproc->reg_base + QDSP6SS_STRAP_ACC);
> > +		if (qproc->version != MSS_MSM8953)
> > +			writel(QDSP6SS_ACC_OVERRIDE_VAL,
> > +					qproc->reg_base + QDSP6SS_STRAP_ACC);
> >   
> >   		/* Assert resets, stop core */
> >   		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
> > @@ -734,7 +737,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> >   		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> >   
> >   		/* Turn on L1, L2, ETB and JU memories 1 at a time */
> > -		if (qproc->version == MSS_MSM8996) {
> > +		if (qproc->version == MSS_MSM8996 ||
> > +			qproc->version == MSS_MSM8953) {
> >   			mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
> >   			i = 19;
> >   		} else {
> > @@ -1314,7 +1318,16 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   			max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
> >   	}
> >   
> > -	/*
> > +	if (qproc->version == MSS_MSM8953) {
> > +		ret = qcom_scm_pas_mem_setup(5, qproc->mpss_phys, qproc->mpss_size);
> > +		if (ret) {
> > +			dev_err(qproc->dev,
> > +					"setting up mpss memory failed: %d\n", ret);
> > +			goto release_firmware;
> > +		}
> > +	}
> > +
> > +	/**
>
> Single star please
>
> >   	 * In case of a modem subsystem restart on secure devices, the modem
> >   	 * memory can be reclaimed only after MBA is loaded.
> >   	 */
> > @@ -1413,7 +1426,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
> >   		}
> >   		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> > -
> >   		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
> >   		if (ret < 0) {
> >   			dev_err(qproc->dev, "MPSS authentication failed: %d\n",
> > @@ -1422,6 +1434,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   		}
> >   	}
> >   
> > +
>
> Unnecessary
>

oops

> >   	/* Transfer ownership of modem ddr region to q6 */
> >   	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
> >   				      qproc->mpss_phys, qproc->mpss_size);
> > @@ -2198,6 +2211,44 @@ static const struct rproc_hexagon_res msm8996_mss = {
> >   	.version = MSS_MSM8996,
> >   };
> >   
> > +static const struct rproc_hexagon_res msm8953_mss = {
> > +	.hexagon_mba_image = "mba.mbn",
> > +	.proxy_supply = (struct qcom_mss_reg_res[]) {
> > +		{
> > +			.supply = "pll",
> > +			.uA = 100000,
> > +		},
> > +		{}
> > +	},
> > +	.proxy_pd_names = (char*[]) {
> > +			"cx",
> > +			"mx",
> > +			NULL
> > +	},
> > +	.active_supply = (struct qcom_mss_reg_res[]) {
> > +		{
> > +			.supply = "mss",
> > +			.uV = 1050000,
> > +			.uA = 100000,
> > +		},
> > +		{}
> > +	},
> > +	.proxy_clk_names = (char*[]){
> > +			"xo",
> > +			NULL
> > +	},
> > +	.active_clk_names = (char*[]){
> > +			"iface",
> > +			"bus",
> > +			"mem",
> > +			NULL
> > +	},
> > +	.need_mem_protection = false,
> > +	.has_alt_reset = false,
> > +	.has_spare_reg = false,
>
>
> Please follow the custom  and define the rest of fields here.
>

I missed these in the rebase, I'll add them in v2

> > +	.version = MSS_MSM8953,
> > +};
> > +
> >   static const struct rproc_hexagon_res msm8916_mss = {
> >   	.hexagon_mba_image = "mba.mbn",
> >   	.proxy_supply = (struct qcom_mss_reg_res[]) {
> > @@ -2301,6 +2352,7 @@ static const struct of_device_id q6v5_of_match[] = {
> >   	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
> >   	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
> >   	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
> > +	{ .compatible = "qcom,msm8953-mss-pil", .data = &msm8953_mss},
> >   	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
> >   	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
> >   	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
>
>
> -- 
> With best wishes
> Dmitry

Thank you for the review, I'll make the changes in v2 of this patch.

Thanks,
Sireesh
Sireesh Kodali May 12, 2022, 10:38 a.m. UTC | #3
On Wed May 11, 2022 at 10:24 PM IST, Dmitry Baryshkov wrote:
> On 11/05/2022 19:15, Sireesh Kodali wrote:
> > The modem on the MSM8953 platform is similar to the modem on the MSM8996
> > platform in terms of set up. It differs primarily in the way it needs SCM
> > to bless the MPSS firmware region.
> > 
> > Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> > ---
> >   drivers/remoteproc/qcom_q6v5_mss.c | 64 +++++++++++++++++++++++++++---
> >   1 file changed, 58 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> > index af217de75e4d..a73fdcddeda4 100644
> > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > @@ -234,6 +234,7 @@ struct q6v5 {
> >   
> >   enum {
> >   	MSS_MSM8916,
> > +	MSS_MSM8953,
> >   	MSS_MSM8974,
> >   	MSS_MSM8996,
> >   	MSS_MSM8998,
> > @@ -687,12 +688,14 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> >   		}
> >   		goto pbl_wait;
> >   	} else if (qproc->version == MSS_MSM8996 ||
> > -		   qproc->version == MSS_MSM8998) {
> > +		   qproc->version == MSS_MSM8998 ||
> > +		   qproc->version == MSS_MSM8953) {
> >   		int mem_pwr_ctl;
> >   
> >   		/* Override the ACC value if required */
> > -		writel(QDSP6SS_ACC_OVERRIDE_VAL,
> > -		       qproc->reg_base + QDSP6SS_STRAP_ACC);
> > +		if (qproc->version != MSS_MSM8953)
> > +			writel(QDSP6SS_ACC_OVERRIDE_VAL,
> > +					qproc->reg_base + QDSP6SS_STRAP_ACC);
> >   
> >   		/* Assert resets, stop core */
> >   		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
> > @@ -734,7 +737,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> >   		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> >   
> >   		/* Turn on L1, L2, ETB and JU memories 1 at a time */
> > -		if (qproc->version == MSS_MSM8996) {
> > +		if (qproc->version == MSS_MSM8996 ||
> > +			qproc->version == MSS_MSM8953) {
> >   			mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
> >   			i = 19;
> >   		} else {
> > @@ -1314,7 +1318,16 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   			max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
> >   	}
> >   
> > -	/*
> > +	if (qproc->version == MSS_MSM8953) {
> > +		ret = qcom_scm_pas_mem_setup(5, qproc->mpss_phys, qproc->mpss_size);
> > +		if (ret) {
> > +			dev_err(qproc->dev,
> > +					"setting up mpss memory failed: %d\n", ret);
> > +			goto release_firmware;
> > +		}
> > +	}
> > +
> > +	/**
>
> Single star please

Will fix in v2

>
> >   	 * In case of a modem subsystem restart on secure devices, the modem
> >   	 * memory can be reclaimed only after MBA is loaded.
> >   	 */
> > @@ -1413,7 +1426,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
> >   		}
> >   		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> > -
> >   		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
> >   		if (ret < 0) {
> >   			dev_err(qproc->dev, "MPSS authentication failed: %d\n",
> > @@ -1422,6 +1434,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   		}
> >   	}
> >   
> > +
>
> Unnecessary

Will fix in v2
>
>
> >   	/* Transfer ownership of modem ddr region to q6 */
> >   	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
> >   				      qproc->mpss_phys, qproc->mpss_size);
> > @@ -2198,6 +2211,44 @@ static const struct rproc_hexagon_res msm8996_mss = {
> >   	.version = MSS_MSM8996,
> >   };
> >   
> > +static const struct rproc_hexagon_res msm8953_mss = {
> > +	.hexagon_mba_image = "mba.mbn",
> > +	.proxy_supply = (struct qcom_mss_reg_res[]) {
> > +		{
> > +			.supply = "pll",
> > +			.uA = 100000,
> > +		},
> > +		{}
> > +	},
> > +	.proxy_pd_names = (char*[]) {
> > +			"cx",
> > +			"mx",
> > +			NULL
> > +	},
> > +	.active_supply = (struct qcom_mss_reg_res[]) {
> > +		{
> > +			.supply = "mss",
> > +			.uV = 1050000,
> > +			.uA = 100000,
> > +		},
> > +		{}
> > +	},
> > +	.proxy_clk_names = (char*[]){
> > +			"xo",
> > +			NULL
> > +	},
> > +	.active_clk_names = (char*[]){
> > +			"iface",
> > +			"bus",
> > +			"mem",
> > +			NULL
> > +	},
> > +	.need_mem_protection = false,
> > +	.has_alt_reset = false,
> > +	.has_spare_reg = false,
>
>
> Please follow the custom  and define the rest of fields here.

Will fix in v2
>
> > +	.version = MSS_MSM8953,
> > +};
> > +
> >   static const struct rproc_hexagon_res msm8916_mss = {
> >   	.hexagon_mba_image = "mba.mbn",
> >   	.proxy_supply = (struct qcom_mss_reg_res[]) {
> > @@ -2301,6 +2352,7 @@ static const struct of_device_id q6v5_of_match[] = {
> >   	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
> >   	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
> >   	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
> > +	{ .compatible = "qcom,msm8953-mss-pil", .data = &msm8953_mss},
> >   	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
> >   	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
> >   	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
>
>
> -- 
> With best wishes
> Dmitry

Thanks,
Sireesh
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index af217de75e4d..a73fdcddeda4 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -234,6 +234,7 @@  struct q6v5 {
 
 enum {
 	MSS_MSM8916,
+	MSS_MSM8953,
 	MSS_MSM8974,
 	MSS_MSM8996,
 	MSS_MSM8998,
@@ -687,12 +688,14 @@  static int q6v5proc_reset(struct q6v5 *qproc)
 		}
 		goto pbl_wait;
 	} else if (qproc->version == MSS_MSM8996 ||
-		   qproc->version == MSS_MSM8998) {
+		   qproc->version == MSS_MSM8998 ||
+		   qproc->version == MSS_MSM8953) {
 		int mem_pwr_ctl;
 
 		/* Override the ACC value if required */
-		writel(QDSP6SS_ACC_OVERRIDE_VAL,
-		       qproc->reg_base + QDSP6SS_STRAP_ACC);
+		if (qproc->version != MSS_MSM8953)
+			writel(QDSP6SS_ACC_OVERRIDE_VAL,
+					qproc->reg_base + QDSP6SS_STRAP_ACC);
 
 		/* Assert resets, stop core */
 		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
@@ -734,7 +737,8 @@  static int q6v5proc_reset(struct q6v5 *qproc)
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 
 		/* Turn on L1, L2, ETB and JU memories 1 at a time */
-		if (qproc->version == MSS_MSM8996) {
+		if (qproc->version == MSS_MSM8996 ||
+			qproc->version == MSS_MSM8953) {
 			mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
 			i = 19;
 		} else {
@@ -1314,7 +1318,16 @@  static int q6v5_mpss_load(struct q6v5 *qproc)
 			max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
 	}
 
-	/*
+	if (qproc->version == MSS_MSM8953) {
+		ret = qcom_scm_pas_mem_setup(5, qproc->mpss_phys, qproc->mpss_size);
+		if (ret) {
+			dev_err(qproc->dev,
+					"setting up mpss memory failed: %d\n", ret);
+			goto release_firmware;
+		}
+	}
+
+	/**
 	 * In case of a modem subsystem restart on secure devices, the modem
 	 * memory can be reclaimed only after MBA is loaded.
 	 */
@@ -1413,7 +1426,6 @@  static int q6v5_mpss_load(struct q6v5 *qproc)
 			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
 		}
 		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
-
 		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
 		if (ret < 0) {
 			dev_err(qproc->dev, "MPSS authentication failed: %d\n",
@@ -1422,6 +1434,7 @@  static int q6v5_mpss_load(struct q6v5 *qproc)
 		}
 	}
 
+
 	/* Transfer ownership of modem ddr region to q6 */
 	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
 				      qproc->mpss_phys, qproc->mpss_size);
@@ -2198,6 +2211,44 @@  static const struct rproc_hexagon_res msm8996_mss = {
 	.version = MSS_MSM8996,
 };
 
+static const struct rproc_hexagon_res msm8953_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "pll",
+			.uA = 100000,
+		},
+		{}
+	},
+	.proxy_pd_names = (char*[]) {
+			"cx",
+			"mx",
+			NULL
+	},
+	.active_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "mss",
+			.uV = 1050000,
+			.uA = 100000,
+		},
+		{}
+	},
+	.proxy_clk_names = (char*[]){
+			"xo",
+			NULL
+	},
+	.active_clk_names = (char*[]){
+			"iface",
+			"bus",
+			"mem",
+			NULL
+	},
+	.need_mem_protection = false,
+	.has_alt_reset = false,
+	.has_spare_reg = false,
+	.version = MSS_MSM8953,
+};
+
 static const struct rproc_hexagon_res msm8916_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_supply = (struct qcom_mss_reg_res[]) {
@@ -2301,6 +2352,7 @@  static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
 	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
 	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
+	{ .compatible = "qcom,msm8953-mss-pil", .data = &msm8953_mss},
 	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
 	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
 	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},