| Message ID | 20220713113612.2117279-2-arnaud.pouliquen@foss.st.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | remoteproc: restructure the remoteproc VirtIO device | expand |
On Wed, Jul 13, 2022 at 01:36:09PM +0200, Arnaud Pouliquen wrote: > In preparation of the migration of the management of rvdev in > remoteproc_virtio.c, this patch spins off a new function to manage the > remoteproc virtio device creation. > > The rproc_rvdev_add_device will be moved to remoteproc_virtio.c. > > The rproc_vdev_data structure is introduced to provide information for > the rvdev creation. This structure allows to manage the rvdev and vrings > allocation in the rproc_rvdev_add_device function. > > Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > --- > update vs previous revision: > The update are based on Mathieu Poirier's comments. > - fix typo s/onlyduring/only during > --- > drivers/remoteproc/remoteproc_core.c | 145 +++++++++++++---------- > drivers/remoteproc/remoteproc_internal.h | 15 +++ > 2 files changed, 97 insertions(+), 63 deletions(-) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 02a04ab34a23..f328d45d8376 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -484,74 +484,23 @@ static int copy_dma_range_map(struct device *to, struct device *from) > return 0; > } > > -/** > - * rproc_handle_vdev() - handle a vdev fw resource > - * @rproc: the remote processor > - * @ptr: the vring resource descriptor > - * @offset: offset of the resource entry > - * @avail: size of available data (for sanity checking the image) > - * > - * This resource entry requests the host to statically register a virtio > - * device (vdev), and setup everything needed to support it. It contains > - * everything needed to make it possible: the virtio device id, virtio > - * device features, vrings information, virtio config space, etc... > - * > - * Before registering the vdev, the vrings are allocated from non-cacheable > - * physically contiguous memory. Currently we only support two vrings per > - * remote processor (temporary limitation). We might also want to consider > - * doing the vring allocation only later when ->find_vqs() is invoked, and > - * then release them upon ->del_vqs(). > - * > - * Note: @da is currently not really handled correctly: we dynamically > - * allocate it using the DMA API, ignoring requested hard coded addresses, > - * and we don't take care of any required IOMMU programming. This is all > - * going to be taken care of when the generic iommu-based DMA API will be > - * merged. Meanwhile, statically-addressed iommu-based firmware images should > - * use RSC_DEVMEM resource entries to map their required @da to the physical > - * address of their base CMA region (ouch, hacky!). > - * > - * Return: 0 on success, or an appropriate error code otherwise > - */ > -static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > - int offset, int avail) > +static struct rproc_vdev * > +rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data) > { > - struct fw_rsc_vdev *rsc = ptr; > - struct device *dev = &rproc->dev; > struct rproc_vdev *rvdev; > - int i, ret; > + struct fw_rsc_vdev *rsc = rvdev_data->rsc; > char name[16]; > - > - /* make sure resource isn't truncated */ > - if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len > > - avail) { > - dev_err(dev, "vdev rsc is truncated\n"); > - return -EINVAL; > - } > - > - /* make sure reserved bytes are zeroes */ > - if (rsc->reserved[0] || rsc->reserved[1]) { > - dev_err(dev, "vdev rsc has non zero reserved bytes\n"); > - return -EINVAL; > - } > - > - dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", > - rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); > - > - /* we currently support only two vrings per rvdev */ > - if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { > - dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); > - return -EINVAL; > - } > + int i, ret; > > rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); > if (!rvdev) > - return -ENOMEM; > + return ERR_PTR(-ENOMEM); > > kref_init(&rvdev->refcount); > > - rvdev->id = rsc->id; > + rvdev->id = rvdev_data->id; > rvdev->rproc = rproc; > - rvdev->index = rproc->nb_vdev++; > + rvdev->index = rvdev_data->index; > > /* Initialise vdev subdevice */ > snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); > @@ -563,7 +512,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > ret = device_register(&rvdev->dev); > if (ret) { > put_device(&rvdev->dev); > - return ret; > + return ERR_PTR(ret); > } > > ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); > @@ -576,7 +525,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > ret = dma_coerce_mask_and_coherent(&rvdev->dev, > dma_get_mask(rproc->dev.parent)); > if (ret) { > - dev_warn(dev, > + dev_warn(&rvdev->dev, > "Failed to set DMA mask %llx. Trying to continue... (%pe)\n", > dma_get_mask(rproc->dev.parent), ERR_PTR(ret)); > } > @@ -589,7 +538,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > } > > /* remember the resource offset*/ > - rvdev->rsc_offset = offset; > + rvdev->rsc_offset = rvdev_data->rsc_offset; > > /* allocate the vring resources */ > for (i = 0; i < rsc->num_of_vrings; i++) { > @@ -605,14 +554,14 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > > rproc_add_subdev(rproc, &rvdev->subdev); > > - return 0; > + return rvdev; > > unwind_vring_allocations: > for (i--; i >= 0; i--) > rproc_free_vring(&rvdev->vring[i]); > free_rvdev: > device_unregister(&rvdev->dev); > - return ret; > + return ERR_PTR(ret); > } > > void rproc_vdev_release(struct kref *ref) > @@ -632,6 +581,76 @@ void rproc_vdev_release(struct kref *ref) > device_unregister(&rvdev->dev); > } > > +/** > + * rproc_handle_vdev() - handle a vdev fw resource > + * @rproc: the remote processor > + * @ptr: the vring resource descriptor > + * @offset: offset of the resource entry > + * @avail: size of available data (for sanity checking the image) > + * > + * This resource entry requests the host to statically register a virtio > + * device (vdev), and setup everything needed to support it. It contains > + * everything needed to make it possible: the virtio device id, virtio > + * device features, vrings information, virtio config space, etc... > + * > + * Before registering the vdev, the vrings are allocated from non-cacheable > + * physically contiguous memory. Currently we only support two vrings per > + * remote processor (temporary limitation). We might also want to consider > + * doing the vring allocation only later when ->find_vqs() is invoked, and > + * then release them upon ->del_vqs(). > + * > + * Note: @da is currently not really handled correctly: we dynamically > + * allocate it using the DMA API, ignoring requested hard coded addresses, > + * and we don't take care of any required IOMMU programming. This is all > + * going to be taken care of when the generic iommu-based DMA API will be > + * merged. Meanwhile, statically-addressed iommu-based firmware images should > + * use RSC_DEVMEM resource entries to map their required @da to the physical > + * address of their base CMA region (ouch, hacky!). > + * > + * Return: 0 on success, or an appropriate error code otherwise > + */ > +static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > + int offset, int avail) > +{ > + struct fw_rsc_vdev *rsc = ptr; > + struct device *dev = &rproc->dev; > + struct rproc_vdev *rvdev; > + struct rproc_vdev_data rvdev_data; > + > + /* make sure resource isn't truncated */ > + if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len > > + avail) { > + dev_err(dev, "vdev rsc is truncated\n"); > + return -EINVAL; > + } > + > + /* make sure reserved bytes are zeroes */ > + if (rsc->reserved[0] || rsc->reserved[1]) { > + dev_err(dev, "vdev rsc has non zero reserved bytes\n"); > + return -EINVAL; > + } > + > + dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", > + rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); > + > + /* we currently support only two vrings per rvdev */ > + if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { > + dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); > + return -EINVAL; > + } > + > + rvdev_data.id = rsc->id; > + rvdev_data.index = rproc->nb_vdev++; > + rvdev_data.rsc_offset = offset; > + rvdev_data.rsc = rsc; > + > + rvdev = rproc_rvdev_add_device(rproc, &rvdev_data); > + if (IS_ERR(rvdev)) > + return PTR_ERR(rvdev); > + > + return 0; > +} > + > /** > * rproc_handle_trace() - handle a shared trace buffer resource > * @rproc: the remote processor > diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h > index 72d4d3d7d94d..07c503de0f95 100644 > --- a/drivers/remoteproc/remoteproc_internal.h > +++ b/drivers/remoteproc/remoteproc_internal.h > @@ -24,6 +24,21 @@ struct rproc_debug_trace { > struct rproc_mem_entry trace_mem; > }; > > +/** > + * struct rproc_vdev_data - remoteproc virtio device data > + * @rsc_offset: offset of the vdev's resource entry > + * @id: virtio device id (as in virtio_ids.h) > + * @index: vdev position versus other vdev declared in resource table > + * @rsc: pointer to the vdev resource entry. Valid only during vdev init as > + * the resource can be cached by rproc. > + */ > +struct rproc_vdev_data { > + u32 rsc_offset; > + unsigned int id; > + u32 index; > + struct fw_rsc_vdev *rsc; > +}; > + > /* from remoteproc_core.c */ > void rproc_release(struct kref *kref); > irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id); > -- > 2.24.3 >
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 02a04ab34a23..f328d45d8376 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -484,74 +484,23 @@ static int copy_dma_range_map(struct device *to, struct device *from) return 0; } -/** - * rproc_handle_vdev() - handle a vdev fw resource - * @rproc: the remote processor - * @ptr: the vring resource descriptor - * @offset: offset of the resource entry - * @avail: size of available data (for sanity checking the image) - * - * This resource entry requests the host to statically register a virtio - * device (vdev), and setup everything needed to support it. It contains - * everything needed to make it possible: the virtio device id, virtio - * device features, vrings information, virtio config space, etc... - * - * Before registering the vdev, the vrings are allocated from non-cacheable - * physically contiguous memory. Currently we only support two vrings per - * remote processor (temporary limitation). We might also want to consider - * doing the vring allocation only later when ->find_vqs() is invoked, and - * then release them upon ->del_vqs(). - * - * Note: @da is currently not really handled correctly: we dynamically - * allocate it using the DMA API, ignoring requested hard coded addresses, - * and we don't take care of any required IOMMU programming. This is all - * going to be taken care of when the generic iommu-based DMA API will be - * merged. Meanwhile, statically-addressed iommu-based firmware images should - * use RSC_DEVMEM resource entries to map their required @da to the physical - * address of their base CMA region (ouch, hacky!). - * - * Return: 0 on success, or an appropriate error code otherwise - */ -static int rproc_handle_vdev(struct rproc *rproc, void *ptr, - int offset, int avail) +static struct rproc_vdev * +rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data) { - struct fw_rsc_vdev *rsc = ptr; - struct device *dev = &rproc->dev; struct rproc_vdev *rvdev; - int i, ret; + struct fw_rsc_vdev *rsc = rvdev_data->rsc; char name[16]; - - /* make sure resource isn't truncated */ - if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len > - avail) { - dev_err(dev, "vdev rsc is truncated\n"); - return -EINVAL; - } - - /* make sure reserved bytes are zeroes */ - if (rsc->reserved[0] || rsc->reserved[1]) { - dev_err(dev, "vdev rsc has non zero reserved bytes\n"); - return -EINVAL; - } - - dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", - rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); - - /* we currently support only two vrings per rvdev */ - if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { - dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); - return -EINVAL; - } + int i, ret; rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); if (!rvdev) - return -ENOMEM; + return ERR_PTR(-ENOMEM); kref_init(&rvdev->refcount); - rvdev->id = rsc->id; + rvdev->id = rvdev_data->id; rvdev->rproc = rproc; - rvdev->index = rproc->nb_vdev++; + rvdev->index = rvdev_data->index; /* Initialise vdev subdevice */ snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); @@ -563,7 +512,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, ret = device_register(&rvdev->dev); if (ret) { put_device(&rvdev->dev); - return ret; + return ERR_PTR(ret); } ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); @@ -576,7 +525,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, ret = dma_coerce_mask_and_coherent(&rvdev->dev, dma_get_mask(rproc->dev.parent)); if (ret) { - dev_warn(dev, + dev_warn(&rvdev->dev, "Failed to set DMA mask %llx. Trying to continue... (%pe)\n", dma_get_mask(rproc->dev.parent), ERR_PTR(ret)); } @@ -589,7 +538,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, } /* remember the resource offset*/ - rvdev->rsc_offset = offset; + rvdev->rsc_offset = rvdev_data->rsc_offset; /* allocate the vring resources */ for (i = 0; i < rsc->num_of_vrings; i++) { @@ -605,14 +554,14 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, rproc_add_subdev(rproc, &rvdev->subdev); - return 0; + return rvdev; unwind_vring_allocations: for (i--; i >= 0; i--) rproc_free_vring(&rvdev->vring[i]); free_rvdev: device_unregister(&rvdev->dev); - return ret; + return ERR_PTR(ret); } void rproc_vdev_release(struct kref *ref) @@ -632,6 +581,76 @@ void rproc_vdev_release(struct kref *ref) device_unregister(&rvdev->dev); } +/** + * rproc_handle_vdev() - handle a vdev fw resource + * @rproc: the remote processor + * @ptr: the vring resource descriptor + * @offset: offset of the resource entry + * @avail: size of available data (for sanity checking the image) + * + * This resource entry requests the host to statically register a virtio + * device (vdev), and setup everything needed to support it. It contains + * everything needed to make it possible: the virtio device id, virtio + * device features, vrings information, virtio config space, etc... + * + * Before registering the vdev, the vrings are allocated from non-cacheable + * physically contiguous memory. Currently we only support two vrings per + * remote processor (temporary limitation). We might also want to consider + * doing the vring allocation only later when ->find_vqs() is invoked, and + * then release them upon ->del_vqs(). + * + * Note: @da is currently not really handled correctly: we dynamically + * allocate it using the DMA API, ignoring requested hard coded addresses, + * and we don't take care of any required IOMMU programming. This is all + * going to be taken care of when the generic iommu-based DMA API will be + * merged. Meanwhile, statically-addressed iommu-based firmware images should + * use RSC_DEVMEM resource entries to map their required @da to the physical + * address of their base CMA region (ouch, hacky!). + * + * Return: 0 on success, or an appropriate error code otherwise + */ +static int rproc_handle_vdev(struct rproc *rproc, void *ptr, + int offset, int avail) +{ + struct fw_rsc_vdev *rsc = ptr; + struct device *dev = &rproc->dev; + struct rproc_vdev *rvdev; + struct rproc_vdev_data rvdev_data; + + /* make sure resource isn't truncated */ + if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len > + avail) { + dev_err(dev, "vdev rsc is truncated\n"); + return -EINVAL; + } + + /* make sure reserved bytes are zeroes */ + if (rsc->reserved[0] || rsc->reserved[1]) { + dev_err(dev, "vdev rsc has non zero reserved bytes\n"); + return -EINVAL; + } + + dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", + rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); + + /* we currently support only two vrings per rvdev */ + if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { + dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); + return -EINVAL; + } + + rvdev_data.id = rsc->id; + rvdev_data.index = rproc->nb_vdev++; + rvdev_data.rsc_offset = offset; + rvdev_data.rsc = rsc; + + rvdev = rproc_rvdev_add_device(rproc, &rvdev_data); + if (IS_ERR(rvdev)) + return PTR_ERR(rvdev); + + return 0; +} + /** * rproc_handle_trace() - handle a shared trace buffer resource * @rproc: the remote processor diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h index 72d4d3d7d94d..07c503de0f95 100644 --- a/drivers/remoteproc/remoteproc_internal.h +++ b/drivers/remoteproc/remoteproc_internal.h @@ -24,6 +24,21 @@ struct rproc_debug_trace { struct rproc_mem_entry trace_mem; }; +/** + * struct rproc_vdev_data - remoteproc virtio device data + * @rsc_offset: offset of the vdev's resource entry + * @id: virtio device id (as in virtio_ids.h) + * @index: vdev position versus other vdev declared in resource table + * @rsc: pointer to the vdev resource entry. Valid only during vdev init as + * the resource can be cached by rproc. + */ +struct rproc_vdev_data { + u32 rsc_offset; + unsigned int id; + u32 index; + struct fw_rsc_vdev *rsc; +}; + /* from remoteproc_core.c */ void rproc_release(struct kref *kref); irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
In preparation of the migration of the management of rvdev in remoteproc_virtio.c, this patch spins off a new function to manage the remoteproc virtio device creation. The rproc_rvdev_add_device will be moved to remoteproc_virtio.c. The rproc_vdev_data structure is introduced to provide information for the rvdev creation. This structure allows to manage the rvdev and vrings allocation in the rproc_rvdev_add_device function. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> --- update vs previous revision: The update are based on Mathieu Poirier's comments. - fix typo s/onlyduring/only during --- drivers/remoteproc/remoteproc_core.c | 145 +++++++++++++---------- drivers/remoteproc/remoteproc_internal.h | 15 +++ 2 files changed, 97 insertions(+), 63 deletions(-)