deleted file mode 100644
@@ -1,177 +0,0 @@
-Qualcomm WCNSS Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm WCNSS core.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,riva-pil",
- "qcom,pronto-v1-pil",
- "qcom,pronto-v2-pil"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must specify the base address and size of the CCU, DXE and
- PMU register blocks
-
-- reg-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "ccu", "dxe", "pmu"
-
-- interrupts-extended:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must list the watchdog and fatal IRQs and may specify the
- ready, handover and stop-ack IRQs
-
-- interrupt-names:
- Usage: required
- Value type: <stringlist>
- Definition: should be "wdog", "fatal", optionally followed by "ready",
- "handover", "stop-ack"
-
-- firmware-name:
- Usage: optional
- Value type: <string>
- Definition: must list the relative firmware image path for the
- WCNSS core. Defaults to "wcnss.mdt".
-
-- vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
-- vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
-- vddpx-supply:
- Usage: required
- Value type: <phandle>
- Definition: reference to the regulators to be held on behalf of the
- booting of the WCNSS core
-
-- power-domains:
- Usage: required (for qcom,pronto-v1/2-pil)
- Value type: <phandle>
- Definition: reference to the power domains to be held on behalf of the
- booting of the WCNSS core
-
-- power-domain-names:
- Usage: required (for qcom,pronto-v1/2-pil)
- Value type: <stringlist>
- Definition: must be "cx", "mx"
-
-- qcom,smem-states:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: reference to the SMEM state used to indicate to WCNSS that
- it should shut down
-
-- qcom,smem-state-names:
- Usage: optional
- Value type: <stringlist>
- Definition: should be "stop"
-
-- memory-region:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to reserved-memory node for the remote processor
- see ../reserved-memory/reserved-memory.txt
-
-= SUBNODES
-A required subnode of the WCNSS PIL is used to describe the attached rf module
-and its resource dependencies. It is described by the following properties:
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,wcn3620",
- "qcom,wcn3660",
- "qcom,wcn3660b",
- "qcom,wcn3680"
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the xo clock and optionally the rf clock
-
-- clock-names:
- Usage: required
- Value type: <stringlist>
- Definition: should be "xo", optionally followed by "rf"
-
-- vddxo-supply:
-- vddrfa-supply:
-- vddpa-supply:
-- vdddig-supply:
- Usage: required
- Value type: <phandle>
- Definition: reference to the regulators to be held on behalf of the
- booting of the WCNSS core
-
-
-The wcnss node can also have an subnode named "smd-edge" that describes the SMD
-edge, channels and devices related to the WCNSS.
-See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the WCNSS,
-with attached WCN3680, as it is commonly found on MSM8974 boards.
-
-pronto@fb204000 {
- compatible = "qcom,pronto-v2-pil";
- reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
- reg-names = "ccu", "dxe", "pmu";
-
- interrupts-extended = <&intc 0 149 1>,
- <&wcnss_smp2p_slave 0 0>,
- <&wcnss_smp2p_slave 1 0>,
- <&wcnss_smp2p_slave 2 0>,
- <&wcnss_smp2p_slave 3 0>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- power-domains = <&rpmpd MSM8974_VDDCX>, <&rpmpd MSM8974_VDDMX>;
- power-domain-names = "cx", "mx";
-
- vddpx-supply = <&pm8941_s3>;
-
- qcom,smem-states = <&wcnss_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- memory-region = <&wcnss_region>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&wcnss_pin_a>;
-
- iris {
- compatible = "qcom,wcn3680";
-
- clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>;
- clock-names = "xo", "rf";
-
- vddxo-supply = <&pm8941_l6>;
- vddrfa-supply = <&pm8941_l11>;
- vddpa-supply = <&pm8941_l19>;
- vdddig-supply = <&pm8941_s3>;
- };
-
- smd-edge {
- interrupts = <0 142 1>;
-
- qcom,ipc = <&apcs 8 17>;
- qcom,smd-edge = <6>;
- qcom,remote-pid = <4>;
-
- label = "pronto";
-
- wcnss {
- compatible = "qcom,wcnss";
- qcom,smd-channels = "WCNSS_CTRL";
-
- qcom,mmio = <&pronto>;
-
- bt {
- compatible = "qcom,wcnss-bt";
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,wcnss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCNSS Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ This document defines the binding for a component that loads and boots
+ firmware on the Qualcomm WCNSS core.
+
+properties:
+ compatible:
+ enum:
+ - qcom,riva-pil
+ - qcom,pronto-v1-pil
+ - qcom,pronto-v2-pil
+
+ reg:
+ maxItems: 3
+ description:
+ The base address and size of the CCU, DXE and PMU register blocks
+
+ reg-names:
+ items:
+ - const: ccu
+ - const: dxe
+ - const: pmu
+
+ interrupts:
+ minItems: 2
+ maxItems: 5
+
+ interrupt-names:
+ minItems: 2
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Relative firmware image path for the WCNSS core. Defaults to
+ "wcnss.mdt".
+
+ vddpx-supply:
+ description:
+ PX regulator to be held on behalf of the booting of the WCNSS core
+
+ vddmx-supply:
+ description:
+ MX regulator to be held on behalf of the booting of the WCNSS core.
+
+ vddcx-supply:
+ description:
+ CX regulator to be held on behalf of the booting of the WCNSS core.
+
+ power-domains:
+ maxItems: 2
+
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mx
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ States used by the AP to signal the WCNSS core that it should shutdown
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+ memory-region:
+ maxItems: 1
+ description: reserved-memory for the WCNSS core
+
+ smd-edge:
+ $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+ description:
+ Qualcomm Shared Memory subnode which represents communication edge,
+ channels and devices related to the ADSP.
+
+ iris:
+ type: object
+ description:
+ The iris subnode of the WCNSS PIL is used to describe the attached RF module
+ and its resource dependencies.
+
+ properties:
+ compatible:
+ enum:
+ - qcom,wcn3620
+ - qcom,wcn3660
+ - qcom,wcn3660b
+ - qcom,wcn3680
+
+ clocks:
+ minItems: 1
+ items:
+ - description: XO clock
+ - description: RF clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: xo
+ - const: rf
+
+ vddxo-supply:
+ description:
+ Reference to the regulator to be held on behalf of the booting WCNSS
+ core
+
+ vddrfa-supply:
+ description:
+ Reference to the regulator to be held on behalf of the booting WCNSS
+ core
+
+ vddpa-supply:
+ description:
+ Reference to the regulator to be held on behalf of the booting WCNSS
+ core
+
+ vdddig-supply:
+ description:
+ Reference to the regulator to be held on behalf of the booting WCNSS
+ core
+
+ required:
+ - compatible
+ - clocks
+ - clock-names
+ - vddxo-supply
+ - vddrfa-supply
+ - vddpa-supply
+ - vdddig-supply
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts-extended
+ - interrupt-names
+ - iris
+ - vddpx-supply
+ - memory-region
+ - smd-edge
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,riva-pil
+ then:
+ required:
+ - vddcx-supply
+ - vddmx-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pronto-v1-pil
+ - qcom,pronto-v2-pil
+ then:
+ properties:
+ vddmx-supply:
+ deprecated: true
+ description: Deprecated for qcom,pronto-v1/2-pil
+
+ vddcx-supply:
+ deprecated: true
+ description: Deprecated for qcom,pronto-v1/2-pil
+
+ required:
+ - power-domains
+ - power-domain-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ pronto@a21b000 {
+ compatible = "qcom,pronto-v2-pil";
+ reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ vddpx-supply = <&pm8916_l7>;
+
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ memory-region = <&wcnss_region>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
+
+ iris {
+ compatible = "qcom,wcn3620";
+ vddxo-supply = <&pm8916_l7>;
+ vddrfa-supply = <&pm8916_s3>;
+ vddpa-supply = <&pm8916_l9>;
+ vdddig-supply = <&pm8916_l5>;
+
+ clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+ clock-names = "xo";
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+ qcom,remote-pid = <4>;
+
+ label = "pronto";
+
+ wcnss_ctrl: wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&pronto>;
+
+ bluetooth {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
This is a direct conversion of the existing txt documentation to YAML. It is in preparation for the addition of pronto-v3 to the docs. This patch doesn't document any of the existing subnodes/properties that are not documented in the existing txt file. That is done in a separate patch. Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> --- .../bindings/remoteproc/qcom,wcnss-pil.txt | 177 ------------ .../bindings/remoteproc/qcom,wcnss-pil.yaml | 267 ++++++++++++++++++ 2 files changed, 267 insertions(+), 177 deletions(-) delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml